Piecewise affine expressions have directly corresponding mathematical
operators. Introduce these operators as overloads as this makes writing
code with isl::pw_aff expressions more directly readable.
We can now write:
A = B + C instead of A = B.add(C)
Reviewers: Meinersbur, bollu, sebpop
Reviewed By: Meinersbur
Subscribers: philip.pfaffe, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D45534
llvm-svn: 329880
Piecewise affine expressions have directly corresponding mathematical
operators. Introduce these operators as overloads as this makes writing
code with isl::pw_aff expressions more directly readable.
We can now write:
A = B + C instead of A = B.add(C)
llvm-svn: 327216
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
The implementation of computeArrayUnused did not consider writes without
reads before, except for the first write in the SCoP. This caused it to
'forget' writes directly following another write.
This patch re-adds the entire reaching defintion of a write that has not
been covered before by a read.
This fixes Polybench 4.2 2mm where only one of the matrix-multiplication
was detected.
llvm-svn: 311403
In https://reviews.llvm.org/D36278 it was pointed out that the behavior of
getPartialTilePrefixes is not very well understood. To allow for a better
understanding, we first provide some basic unittests.
llvm-svn: 310175
this is a great test file name based on this update, but I'll let Polly
folks sort out how they want this to work long-term, I just want tho
bots back.
llvm-svn: 306767
This patch adds both a ScopAnalysisManager and a ScopPassManager.
The ScopAnalysisManager is itself a Function-Analysis, and manages
analyses on Scops. The ScopPassManager takes care of building Scop pass
pipelines.
This patch is marked WIP because I've left two FIXMEs which I need to
think about some more. Both of these deal with invalidation:
Deferred invalidation is currently not implemented. Deferred
invalidation deals with analyses which cache references to other
analysis results. If these results are invalidated, invalidation needs
to be propagated into the caching analyses.
The ScopPassManager as implemented assumes that ScopPasses do not affect
other Scops in any way. There has been some discussion about this on
other patch threads, however it makes sense to reiterate this for this
specific patch.
I'm uploading this patch even though it's incomplete to encourage
discussion and give you an impression of how this is going to work.
Differential Revision: https://reviews.llvm.org/D33192
llvm-svn: 303062
Polly comes in two library flavors: One loadable module to use the
LLVM framework -load mechanism, and another one that host applications
can link to. These have very different requirements for Polly's
own dependencies.
The loadable module assumes that all its LLVM dependencies are already
available in the address space of the host application, and is not allowed
to bring in its own copy of any LLVM library (including the NVPTX
backend in case of Polly-ACC).
The non-module library is intended to be linked to using
target_link_libraries. CMake would then resolve all of its dependencies,
including NVPTX and ensure that only a single instance of each library
will be used.
Differential Revision: https://reviews.llvm.org/D32442
llvm-svn: 301558
The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
This prinviple also applies to Written values. Add a test for this
principle.
llvm-svn: 301481
The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
Add a case to test this principle.
llvm-svn: 301480
Do not conflict if a write writes the same value as already known.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32026
llvm-svn: 301460
Do not conflict if the value of Existing and Proposed are the same.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32025
llvm-svn: 301301
When both, OccupiedAndKnown and Unused are given, use the former only
for the Known values. The relation Unused \union Occupied must always
hold.
This allows us to specify Known independently of Occupied. It is needed
for an artificial test case in https://reviews.llvm.org/D32025.
llvm-svn: 301284
Unittests are linked against a subset of LLVM libraries and its
transitive dependencies resolved by CMake. The information about indirect
library dependency is not available when building separately from
LLVM, which result in missing symbol errors while linking.
Resolve this issue by querying llvm-config about the available
LLVM libraries and link against all of them, since dependence
information is still not available.
llvm-svn: 301095
We can only link against libLLVM.so or the individual libLLVM*.so
components, but not both of them. Doing so results in these components
exist twice in the programs address space, since it is already contained
in libLLVM.so. The observable effect of this is that command line
switches are registered multiple times (once for each instance),
which is an error.
This fixes llvm.org/PR32735.
Reported-by: Singapuram Sanjay Srivallabh <singapuram.sanjay@gmail.com>
llvm-svn: 301020
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32027
llvm-svn: 300874
This commit switches Polly over to the isl::obj::foreach_* implementation, which
is part of the new isl bindings and follows the foreach pattern established in
Polly by Michael Kruse.
The original isl C function:
isl_stat isl_union_set_foreach_set(__isl_keep isl_union_set *uset,
isl_stat (*fn)(__isl_take isl_set *set, void *user), void *user);
which required the user to define a static callback function to which all
interesting parameters are passed via a 'void *' user-pointer, is on the
C++ side available as a function that takes a std::function<>, which can
carry any additional arguments without the need for a user pointer:
stat UnionSet::foreach_set(const std::function<stat(set)> &fn) const;
The following code illustrates the use of the new C++ interface:
auto Lambda = [=, &Result](isl::set Set) -> isl::stat {
auto Shifted = shiftDimension(Set, Pos, Amount);
Result = Result.add(Shifted);
return isl::stat::ok;
}
UnionSet.foreach_set(Lambda);
Polly had some specialized foreach functions which did not require the lambdas
to return a status flag. We remove these functions in this commit to move Polly
completely over to the new isl interface. We may in the future discuss if
functors without return values can be supported easily.
Another extension proposed by Michael Kruse is the use of C++ iterators to allow
the use of normal for loops to iterate over these sets. Such an extension would
allow us to further simplify the code.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D30620
llvm-svn: 300323
Add shiftDim and convertZoneToTimepoints overloads for isl maps.
Add distributeDomain, liftDomains and applyDomainRange functions.
These are going to be used in https://reviews.llvm.org/D31247
(Add known array contents to Knowledge)
llvm-svn: 298543
Note that the isl::union_set(isl_ctx,std::string) constructor will
auto-convert the char* to an std::string. Converting a nullptr to
std::string is undefined in C++11 (sect. 21.4.2.9).
llvm-svn: 298259
Otherwise the isl_id NewId which ensures uniqueness of the
created space is unused. None of the tests currently uses an
nameless tuple, so there is not change in what is tested.
llvm-svn: 298258
Currently the isl::val constructor only takes a signed long as parameter, which
on Windows is only 32 bit large and can consequently not be used to obtain the
same result when loading from the expression '(1ull << 32) - 1)' that we get
when loading this value via isl_val_int_from_ui or when loading the value
on Linux systems with 64 bit long data types. We avoid this issue by performing
the shift and subtractiong within the isl::val.
It would be nice to teach the isl++ bindings to construct isl::val from other
integer types, but the current interface is not sufficient to do so. If
constructors from both signed long and unsigned long are exposed, then integer
literals that are of type 'int' and which must be converted to 'long' to match
the constructor have two ambigious constructors to choose from, which result
in a compiler error. The right solution is likely to additionally expose
constructors from signed and unsigned int, but these are not yet available in
the isl C interface and adding those adhoc to our bindings is something I would
like to avoid for now. We should address this issue with a proper discussion
on the isl side.
llvm-svn: 297522
For this translation we introduce two functions, valFromAPInt and APIntFromVal,
to convert between isl::val and APInt. For now these are just proxies, but in
the future they will replace the current isl_val* based conversion functions.
The isl unit test cases benefit most from the new isl::boolean (from Michael
Kruse), which can be explicitly casted to bool and which -- as part of this cast
-- emits a check that no error condition has been triggered so far. This allows
us to simplify
EXPECT_EQ(isl_bool_true, isl_val_is_zero(IslZero));
to
EXPECT_TRUE(IslZero.is_zero());
This simplification also becomes very clear in operator==, which changes from
auto IsEqual = isl_set_is_equal(LHS.keep(), RHS.keep());
EXPECT_NE(isl_bool_error, IsEqual);
return IsEqual;
to just
return bool(LHS.is_equal(RHS));
Some background for non-isl users. The isl C interface has an isl_bool type,
which can be either true, false, or error. Hence, whenever a function returns
a value of type isl_bool, an explicit error check should be considered. By
using isl::boolean, we can just cast the isl::boolean to 'bool' or simply use
the isl::boolean in a context where it will automatically be casted to bool
(e.g., in an if-condition). When doing so, the C++ bindings automatically add
code that verifies that the return value is not an error code. If it is, the
program will warn about this and abort. For cases where errors are expected,
isl::boolean provides checks such as boolean::is_true_or_error() or
boolean::is_true_no_error() to explicitly control program behavior in case of
error conditions.
Thanks to the new automatic memory management, we also can avoid many calls to
isl_*_free. For code that had previously been managed by IslPtr<>, many calls
to give/take/copy are eliminated.
Tags: #polly
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D30618
llvm-svn: 297464
Over the last couple of months several authors of independent isl C++ bindings
worked together to jointly design an official set of isl C++ bindings which
combines their experience in developing isl C++ bindings. The new bindings have
been designed around a value pointer style interface and remove the need for
explicit pointer managenent and instead use C++ language features to manage isl
objects.
This commit introduces the smart-pointer part of the isl C++ bindings and
replaces the current IslPtr<T> classes, which served the very same purpose, but
had to be manually maintained. Instead, we now rely on automatically generated
classes for each isl object, which provide value_ptr semantics.
An isl object has the following smart pointer interface:
inline set manage(__isl_take isl_set *ptr);
class set {
friend inline set manage(__isl_take isl_set *ptr);
isl_set *ptr = nullptr;
inline explicit set(__isl_take isl_set *ptr);
public:
inline set();
inline set(const set &obj);
inline set &operator=(set obj);
inline ~set();
inline __isl_give isl_set *copy() const &;
inline __isl_give isl_set *copy() && = delete;
inline __isl_keep isl_set *get() const;
inline __isl_give isl_set *release();
inline bool is_null() const;
}
The interface and behavior of the new value pointer style classes is inspired
by http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3339.pdf, which
proposes a std::value_ptr, a smart pointer that applies value semantics to its
pointee.
We currently only provide a limited set of public constructors and instead
require provide a global overloaded type constructor method "isl::obj
isl::manage(isl_obj *)", which allows to convert an isl_set* to an isl::set by
calling 'S = isl::manage(s)'. This pattern models the make_unique() constructor
for unique pointers.
The next two functions isl::obj::get() and isl::obj::release() are taken
directly from the std::value_ptr proposal:
S.get() extracts the raw pointer of the object managed by S.
S.release() extracts the raw pointer of the object managed by S and sets the
object in S to null.
We additionally add std::obj::copy(). S.copy() returns a raw pointer refering
to a copy of S, which is a shortcut for "isl::obj(oldobj).release()", a
functionality commonly needed when interacting directly with the isl C
interface where all methods marked with __isl_take require consumable raw
pointers.
S.is_null() checks if S manages a pointer or if the managed object is currently
null. We add this function to provide a more explicit way to check if the
pointer is empty compared to a direct conversion to bool.
This commit also introduces a couple of polly-specific extensions that cover
features currently not handled by the official isl C++ bindings draft, but
which have been provided by IslPtr<T> and are consequently added to avoid code
churn. These extensions include:
- operator bool() : Conversion from objects to bool
- construction from nullptr_t
- get_ctx() method
- take/keep/give methods, which match the currently used naming
convention of IslPtr<T> in Polly. They just forward to
(release/get/manage).
- raw_ostream printers
We expect that these extensions are over time either removed or upstreamed to
the official isl bindings.
We also export a couple of classes that have not yet been exported in isl (e.g.,
isl::space)
As part of the code review, the following two questions were asked:
- Why do we not use a standard smart pointer?
std::value_ptr was a proposal that has not been accepted. It is consequently
not available in the standard library. Even if it would be available, we want
to expand this interface with a complete method interface that is conveniently
available from each managed pointer. The most direct way to achieve this is to
generate a specialiced value style pointer class for each isl object type and
add any additional methods to this class. The relevant changes follow in
subsequent commits.
- Why do we not use templates or macros to avoid code duplication?
It is certainly possible to use templates or macros, but as this code is
auto-generated there is no need to make writing this code more efficient. Also,
most of these classes will be specialized with individual member functions in
subsequent commits, such that there will be little code reuse to exploit. Hence,
we decided to do so at the moment.
These bindings are not yet officially part of isl, but the draft is already very
stable. The smart pointer interface itself did not change since serveral months.
Adding this code to Polly is against our normal policy of only importing
official isl code. In this case however, we make an exception to showcase a
non-trivial use case of these bindings which should increase confidence in these
bindings and will help upstreaming them to isl.
Tags: #polly
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D30325
llvm-svn: 297452
NonowningIslPtr<isl_X> was used as types of function parameters when the
function does not consume the isl object, i.e. an __isl_keep parameter.
The alternatives are:
1. IslPtr<isl_X>
This has additional calls to isl_X_copy and isl_X_free to
increase/decrease the reference counter even though not needed. The
caller already owns a reference to the isl object.
2. const IslPtr<isl_X>&
This does not change the reference counter, but requires an
additional load to get the pointer to the isl object (instead of just
passing the pointer itself).
Moreover, the compiler cannot rely on the constness of the pointer
and has to reload the pointer every time it writes to memory (unless
alias analysis such as TBAA says it is not possible).
The isl C++ bindings currently in development do not have an equivalent
to NonowningIslPtr and adding one would make the binding more
complicated and its advantage in performance is small. In order to
simplify the transition to these C++ bindings, remove NonowningIslPtr.
Change every former use of it to alternative 2 mentioned aboce
(const IslPtr<isl_X>&).
llvm-svn: 295998
The Knowledge class remembers the state of data at any timepoint of a SCoP's
execution. Currently, it tracks whether an array element is unused or is
occupied by some value, and the writes to it. A future addition will be to also
remember which value it contains.
Objects are used to determine whether two Knowledge contain conflicting
information, i.e. two states cannot be true a the same time.
This commit was extracted from the DeLICM algorithm at
https://reviews.llvm.org/D24716.
llvm-svn: 295197
This function has been extracted from the upcoming DeLICM patch
(https://reviews.llvm.org/D24716).
In contrast to computeReachingWrite and computeArrayUnused,
convertZoneToTimepoints implies a format for zones (ranges between timepoints).
Zones at the moment are unique to DeLICM, but convertZoneToTimepoints makes most
sense in conjunction with the previous two functions.
llvm-svn: 294094
Add some generally useful isl tools into a their own new ISLTools.cpp.
These are the helpers were extracted from and will be use by the DeLICM
algorithm (https://reviews.llvm.org/D24716).
Suggested-by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 293340
Tobias Grosser