Get rid of the "; mem:" suffix and use the one we use in MIR: ":: (load 2)".
rdar://38163529
Differential Revision: https://reviews.llvm.org/D42377
llvm-svn: 327580
Nothing prevents us from having both frame-setup and frame-destroy on
the same instruction.
When merging:
* frame-setup OPCODE1
* frame-destroy OPCODE2
into
* frame-setup frame-destroy OPCODE3
we want to be able to print and parse both flags.
llvm-svn: 327442
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
Fix a few places that were modifying code after register
allocation to set the renamable bit correctly to avoid failing the
validation added in D42449.
llvm-svn: 323675
r322086 removed the trailing information describing reg classes for each
register.
This patch adds printing reg classes next to every register when
individual operands/instructions/basic blocks are printed. In the case
of dumping MIR or printing a full function, by default don't print it.
Differential Revision: https://reviews.llvm.org/D42239
llvm-svn: 322867
In -debug output we print "pred:" whenever a MachineOperand is a
predicate operand in the instruction descriptor, and "opt:" whenever a
MachineOperand is an optional def in the instruction descriptor.
Differential Revision: https://reviews.llvm.org/D41870
llvm-svn: 322096
Currently the MachineInstr::print function prints the
frame-setup/frame-destroy differently than it does in MIR.
Instead of:
%x21 = LDR %sp, -16; flags: FrameDestroy
print:
%x21 = frame-destroy LDR %sp, -16
llvm-svn: 322088
Since register classes and banks are already printed with the register
definition, don't print it at the end of every instruction anymore.
This follows MIR in this regard and is another step to the unification
of the two formats.
llvm-svn: 322086
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Add support for operand subreg index as an immediate to debug printing
and use ::print in the MIRPrinter.
Differential Review: https://reviews.llvm.org/D40965
llvm-svn: 320209
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
Previously, hasSideEffects was ? for TargetOpcode::PHI and would be inferred
as 1. D37065 sets the previously inferred properties explicitly. This patch sets
hasSideEffects=0 for PHI, as it is for G_PHI. MachineInstr::isSafeToMove has
been updated so it still returns false for PHI.
Additionally, HexagonBitSimplify relied on a PHI node having the
hasUnmodeledSideEffects property. This patch fixes that assumption.
Differential Revision: https://reviews.llvm.org/D37097
llvm-svn: 317721
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D35844
llvm-svn: 317100
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
MachineInstr::isIdenticalTo has a lot of logic for dealing with register
Defs (i.e. deciding whether to take them into account or ignore them).
This logic gets things wrong in some obscure cases, for instance if an
operand is not a Def for both the current MI and the one we are
comparing to.
I'm not sure if it's possible for this to happen for regular register
operands, but it may happen in the ARM backend for special operands
which use sentinel values for the register (i.e. 0, which is neither a
physical register nor a virtual one).
This causes MachineInstrExpressionTrait::isEqual (which uses
MachineInstr::isIdenticalTo) to return true for the following
instructions, which are the same except for the fact that one sets the
flags and the other one doesn't:
%1114 = ADDrsi %1113, %216, 17, 14, _, def _
%1115 = ADDrsi %1113, %216, 17, 14, _, _
OTOH, MachineInstrExpressionTrait::getHashValue returns different values
for the 2 instructions due to the different isDef on the last operand.
In practice this means that when trying to add those instructions to a
DenseMap, they will be considered different because of their different
hash values, but when growing the map we might get an assertion while
copying from the old buckets to the new buckets because isEqual
misleadingly returns true.
This patch makes sure that isEqual and getHashValue agree, by improving
the checks in MachineInstr::isIdenticalTo when we are ignoring virtual
register definitions (which is what the Trait uses). Firstly, instead of
checking isPhysicalRegister, we use !isVirtualRegister, so that we cover
both physical registers and sentinel values. Secondly, instead of
checking MachineOperand::isReg, we use MachineOperand::isIdenticalTo,
which checks isReg, isSubReg and isDef, which are the same values that
the hash function uses to compute the hash.
Note that the function is symmetric with this change, since if the
current operand is not a Def, we check MachineOperand::isIdenticalTo,
which returns false if the operands have different isDef's.
Differential Revision: https://reviews.llvm.org/D38789
llvm-svn: 315579
Similarly to how Instruction has getFunction, this adds a less verbose
way to write MI->getParent()->getParent(). I'll follow up shortly with
a change that changes a bunch of the uses.
llvm-svn: 315388
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
llvm-svn: 313399
Summary:
Reverts r311008 to reinstate r310825 with a fix.
Refine alias checking for pseudo vs value to be conservative.
This fixes the original failure in builtbot unittest SingleSource/UnitTests/2003-07-09-SignedArgs.
Reviewers: hfinkel, nemanjai, efriedma
Reviewed By: efriedma
Subscribers: bjope, mcrosier, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D36900
llvm-svn: 312126
r310825 caused the clang-ppc64le-linux-lnt bot to go red
(http://lab.llvm.org:8011/builders/clang-ppc64le-linux-lnt/builds/5712)
because of a test-suite failure of
SingleSource/UnitTests/2003-07-09-SignedArgs
This reverts commit 0028f6a87224fb595a1c19c544cde9b003035996.
llvm-svn: 311008
rL306209 taught SelectionDAG how to add the dereferenceable flag when
expanding memcpy and memmove. The fix however contained a nit where
the offset + size was constructed as an APInt of PointerSize rather
than PointerSizeInBits.
This lead to isDereferenceableAndAlignedPointer() get truncated values or
values which would be sign extended within that function leading to
incorrect results.
Thanks to Alex Crichton for reporting the issue!
This resolves PR33978.
Reviewers: inouehrs
Differential Revision: https://reviews.llvm.org/D36236
llvm-svn: 309930
On AMDGPU SGPR spills are really spilled to another register.
The spiller creates the spills to new frame index objects,
which is used as a placeholder.
This will eventually be replaced with a reference to a position
in a VGPR to write to and the frame index deleted. It is
most likely not a real stack location that can be shared
with another stack object.
This is a problem when StackSlotColoring decides it should
combine a frame index used for a normal VGPR spill with
a real stack location and a frame index used for an SGPR.
Add an ID field so that StackSlotColoring has a way
of knowing the different frame index types are
incompatible.
llvm-svn: 308673
Summary: Add target hooks for printing and parsing target MMO flags.
Targets may override getSerializableMachineMemOperandTargetFlags() to
return a mapping from string to flag value for target MMO values that
should be serialized/parsed in MIR output.
Add implementation of this hook for AArch64 SuppressPair MMO flag.
Reviewers: bogner, hfinkel, qcolombet, MatzeB
Subscribers: mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D34962
llvm-svn: 307877
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Krzysztof Parzyszek