This patch adds functionality to FlatAffineConstraints to remove local
variables using equalities. This helps in keeping output representation of
FlatAffineConstraints smaller.
This patch is part of a series of patches aimed at generalizing affine
dependence analysis.
Reviewed By: bondhugula
Differential Revision: https://reviews.llvm.org/D110056
Add support for intersecting, subtracting, complementing and checking equality of sets having divisions.
Reviewed By: bondhugula
Differential Revision: https://reviews.llvm.org/D110138
Currently DenseElementsAttr only exposes the ability to get the full range of values for a given type T, but there are many situations where we just want the beginning/end iterator. This revision adds proper value_begin/value_end methods for all of the supported T types, and also cleans up a bit of the interface.
Differential Revision: https://reviews.llvm.org/D104173
Switches to adding target specific, private includes instead of adding
global includes.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D109494
Conversion to the LLVM dialect is being refactored to be more progressive and
is now performed as a series of independent passes converting different
dialects. These passes may produce `unrealized_conversion_cast` operations that
represent pending conversions between built-in and LLVM dialect types.
Historically, a more monolithic Standard-to-LLVM conversion pass did not need
these casts as all operations were converted in one shot. Previous refactorings
have led to the requirement of running the Standard-to-LLVM conversion pass to
clean up `unrealized_conversion_cast`s even though the IR had no standard
operations in it. The pass must have been also run the last among all to-LLVM
passes, in contradiction with the partial conversion logic. Additionally, the
way it was set up could produce invalid operations by removing casts between
LLVM and built-in types even when the consumer did not accept the uncasted
type, or could lead to cryptic conversion errors (recursive application of the
rewrite pattern on `unrealized_conversion_cast` as a means to indicate failure
to eliminate casts).
In fact, the need to eliminate A->B->A `unrealized_conversion_cast`s is not
specific to to-LLVM conversions and can be factored out into a separate type
reconciliation pass, which is achieved in this commit. While the cast operation
itself has a folder pattern, it is insufficient in most conversion passes as
the folder only applies to the second cast. Without complex legality setup in
the conversion target, the conversion infra will either consider the cast
operations valid and not fold them (a separate canonicalization would be
necessary to trigger the folding), or consider the first cast invalid upon
generation and stop with error. The pattern provided by the reconciliation pass
applies to the first cast operation instead. Furthermore, having a separate
pass makes it clear when `unrealized_conversion_cast`s could not have been
eliminated since it is the only reason why this pass can fail.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D109507
This patch refactors the existing implementation of computing an explicit
representation of an identifier as a floordiv in terms of other identifiers and
exposes this computation as a public function.
The computation of this representation is required to support local identifiers
in PresburgerSet subtract, complement and isEqual.
Reviewed By: bondhugula, arjunp
Differential Revision: https://reviews.llvm.org/D106662
While the changes are extensive, they basically fall into a few
categories:
1) Moving the TestDialect itself.
2) Updating C++ code in tablegen to explicitly use ::mlir, since it
will be put in a headers that shouldn't expect a 'using'.
3) Updating some generic MLIR Interface definitions to do the same thing.
4) Updating the Tablegen generator in a few places to be explicit about
namespaces
5) Doing the same thing for llvm references, since we no longer pick
up the definitions from mlir/Support/LLVM.h
Differential Revision: https://reviews.llvm.org/D88251
This enables querying shapes/values as shapes without mutating the IR
directly (e.g., towards enabling doing inference in analysis &
application steps, inferring function shape with constant from callsite,
...). Add a new ShapeAdaptor that abstracts over whether shape is from
Type or ShapedTypeComponents or DenseIntElementsAttribute. This adds new
accessors to ValueShapeRange to get Shape and value as shape, but
doesn't restrict or remove the previous way of accessing Type via the
Value for now, that does mean a less refined shape could be accidentally
queried and will be restricted in follow up.
Currently restricted Value query to what can be represented as Shape. So
only supports cases where constant subgraph evaluation's output is a
shape. I had considered making it more general, but without TBD extern
attribute concept or some such a user cannot today uniformly avoid
overhead.
Update TOSA ops and also the shape inference pass.
Differential Revision: https://reviews.llvm.org/D107768
The following constructor call (and others) used to be ambiguous:
```
FlatAffineConstraints constraints(0, 0, 0);
```
Differential Revision: https://reviews.llvm.org/D107726
Store both interfaceID and objectID as key for interface registration callback.
Otherwise the implementation allows to register only one external model per one object in the single dialect.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D107274
This patch fixes a bug in the existing implementation of detectAsFloorDiv,
where floordivs with numerator with non-zero constant term and floordivs with
numerator only consisting of a constant term were not being detected.
Reviewed By: vinayaka-polymage
Differential Revision: https://reviews.llvm.org/D107214
Historically the builtin dialect has had an empty namespace. This has unfortunately created a very awkward situation, where many utilities either have to special case the empty namespace, or just don't work at all right now. This revision adds a namespace to the builtin dialect, and starts to cleanup some of the utilities to no longer handle empty namespaces. For now, the assembly form of builtin operations does not require the `builtin.` prefix. (This should likely be re-evaluated though)
Differential Revision: https://reviews.llvm.org/D105149
Adds zero-preserving unary operators from std. Also adds xor.
Performs minor refactoring to remove "zero" node, and pushed
the irregular logic for negi (not support in std) into one place.
Reviewed By: gussmith23
Differential Revision: https://reviews.llvm.org/D105928
This is a fix of https://reviews.llvm.org/D104956, which broke the gcc5 build.
We opt to use unit tests rather than check tests as the lattice/merger code is a small C++ component with a well-defined API. Testing this API via check tests would be far less direct and readable. In addition, as the check tests will only be able to test the API indirectly, the tests may break based on unrelated changes; e.g. changes in linalg.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D105828
After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: herhut, silvas
Differential Revision: https://reviews.llvm.org/D105625
We opt to use unit tests rather than check tests as the lattice/merger code is a small C++ component with a well-defined API. Testing this API via check tests would be far less direct and readable. In addition, as the check tests will only be able to test the API indirectly, the tests may break based on unrelated changes; e.g. changes in linalg.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D104956
This results in significant deduplication of code. This patch is not expected to change any functionality, it's just some simplification in preparation for future work. Also slightly simplified some code that was being touched anyway and added some unit tests for some functions that were touched.
Reviewed By: bondhugula
Differential Revision: https://reviews.llvm.org/D105152
Operations currently rely on the string name of attributes during attribute lookup/removal/replacement, in build methods, and more. This unfortunately means that some of the most used APIs in MLIR require string comparisons, additional hashing(+mutex locking) to construct Identifiers, and more. This revision remedies this by caching identifiers for all of the attributes of the operation in its corresponding AbstractOperation. Just updating the autogenerated usages brings up to a 15% reduction in compile time, greatly reducing the cost of interacting with the attributes of an operation. This number can grow even higher as we use these methods in handwritten C++ code.
Methods for accessing these cached identifiers are exposed via `<attr-name>AttrName` methods on the derived operation class. Moving forward, users should generally use these methods over raw strings when an attribute name is necessary.
Differential Revision: https://reviews.llvm.org/D104167
Redirect the copy ctor to the actual class instead of
overwriting it with `TypeID` based ctor.
This allows the final Pass classes to have extra fields and logic for their copy.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D104302
This functionality is similar to delayed registration of dialect interfaces. It
allows external interface models to be registered before the dialect containing
the attribute/operation/type interface is loaded, or even before the context is
created.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D104397
This is similar to attribute and type interfaces and mostly the same mechanism
(FallbackModel / ExternalModel, ODS generation). There are minor differences in
how the concept-based polymorphism is implemented for operations that are
accounted for by ODS backends, and this essentially adds a test and exposes the
API.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D104294
It may be desirable to provide an interface implementation for an attribute or
a type without modifying the definition of said attribute or type. Notably,
this allows to implement interfaces for attributes and types outside of the
dialect that defines them and, in particular, provide interfaces for built-in
types. Provide the mechanism to do so.
Currently, separable registration requires the attribute or type to have been
registered with the context, i.e. for the dialect containing the attribute or
type to be loaded. This can be relaxed in the future using a mechanism similar
to delayed dialect interface registration.
See https://llvm.discourse.group/t/rfc-separable-attribute-type-interfaces/3637
Depends On D104233
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D104234
These interfaces allow for a composite attribute or type to opaquely provide access to any held attributes or types. There are several intended use cases for this interface. The first of which is to allow the printer to create aliases for non-builtin dialect attributes and types. In the future, this interface will also be extended to allow for SymbolRefAttr to be placed on other entities aside from just DictionaryAttr and ArrayAttr.
To limit potential test breakages, this revision only adds the new interfaces to the builtin attributes/types that are currently hardcoded during AsmPrinter alias generation. In a followup the remaining builtin attributes/types, and non-builtin attributes/types can be extended to support it.
Differential Revision: https://reviews.llvm.org/D102945
This allows us to remove the `spv.mlir.endmodule` op and
all the code associated with it.
Along the way, tightened the APIs for `spv.module` a bit
by removing some aliases. Now we use `getRegion` to get
the only region, and `getBody` to get the region's only
block.
Reviewed By: mravishankar, hanchung
Differential Revision: https://reviews.llvm.org/D103265
Even if the layout specification is missing from an op that supports it, the op
is still expected to provide meaningful responses to data layout queries.
Forward them to the op instead of directly calling the default implementation.
Depends On D98524
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D98525
This is useful for bit-packing types such as vectors and tuples as well as for
exotic architectures that have non-8-bit bytes.
Depends On D98500
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D98524
To match an interface or trait, users currently have to use the `MatchAny` tag. This tag can be quite problematic for compile time for things like the canonicalizer, as the `MatchAny` patterns may get applied to *every* operation. This revision adds better support by bucketing interface/trait patterns based on which registered operations have them registered. This means that moving forward we will only attempt to match these patterns to operations that have this interface registered. Two simplify defining patterns that match traits and interfaces, two new utility classes have been added: OpTraitRewritePattern and OpInterfaceRewritePattern.
Differential Revision: https://reviews.llvm.org/D98986
This nicely aligns the naming with RewritePatternSet. This type isn't
as widely used, but we keep a using declaration in to help with
downstream consumption of this change.
Differential Revision: https://reviews.llvm.org/D99131
This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use the new preferred names. We'll keep the old names around for a
couple weeks to help transitions.
Differential Revision: https://reviews.llvm.org/D99127
This updates the codebase to pass the context when creating an instance of
OwningRewritePatternList, and starts removing extraneous MLIRContext
parameters. There are many many more to be removed.
Differential Revision: https://reviews.llvm.org/D99028
Previously low benefit op-specific patterns never had a chance to match
even if high benefit op-agnostic pattern failed to match.
This was already fixed upstream, this commit just adds testscase
Differential Revision: https://reviews.llvm.org/D98513
Add a feature to `EnumAttr` definition to generate
specialized Attribute class for the particular enumeration.
This class will inherit `StringAttr` or `IntegerAttr` and
will override `classof` and `getValue` methods.
With this class the enumeration predicate can be checked with simple
RTTI calls (`isa`, `dyn_cast`) and it will return the typed enumeration
directly instead of raw string/integer.
Based on the following discussion:
https://llvm.discourse.group/t/rfc-add-enum-attribute-decorator-class/2252
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D97836
Kunwar Shaanjeet Singh Grover