When the debug info contains a relocation against a dead symbol, wasm-ld
may emit spurious range-list terminator entries (entries with Start==0
and End==0). This change fixes this by emitting the WasmRelocation
Addend as End value for a non-live symbol.
Reviewed by: sbc100, dblaikie
Differential Revision: https://reviews.llvm.org/D74781
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
In this case we interpret the path as relative the clang driver binary.
This allows SDKs to be built that include clang along with a custom
sysroot without requiring users to specify --sysroot to point to the
directory where they installed the SDK.
See https://github.com/WebAssembly/wasi-sdk/issues/58
Differential Revision: https://reviews.llvm.org/D76653
Summary: I think Max in the name was misleading. NFC.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76860
Summary:
These methods were identical. I chose to remove getMaxWavesPerCU because
I think Max in the name was misleading. NFC.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76859
Having an alloca in a function causes the stack pointer to be generated in the
prolog, but if it's unused other than for debug info, explicit-locals will drop
it and not allocate a local. In this case we need to reset the FrameBaseVreg.
Differential Revision: https://reviews.llvm.org/D76784
We can improve computeKnownBits results by avoiding excess bitcasts.
For this pattern we were doing:
(v16i8 PACKUS(v8i16 BITCAST(v16i8 AND(V1, MASK)), v8i16 BITCAST(v16i8 AND(V2, MASK))))
By performing the MASK/AND with a v8i16 type and bitcasting V1/V2 directly we can help computeKnownBits see that the mask is clearing the upper bits and allows shuffle combining to peek through later on.
This will be necessary to extend rG9d1721ce3926 to AVX2+ targets in a future patch.
This patch follows the approach also used for MIPS, where we decode the
offending instruction to determine if the fault was caused by a read or
write operation, as that seems to be the only relevant information we have
in the signal context structure to determine that.
Differential Revision: https://reviews.llvm.org/D75168
SUMMARY:
SUMMARY
for a source file "test.c"
void foo() {};
llc will generate assembly code as (assembly patch)
.globl foo
.globl .foo
.csect foo[DS]
foo:
.long .foo
.long TOC[TC0]
.long 0
and symbol table as (xcoff object file)
[4] m 0x00000004 .data 1 unamex foo
[5] a4 0x0000000c 0 0 SD DS 0 0
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 LD DS 0 0
After first patch, the assembly will be as
.globl foo[DS] # -- Begin function foo
.globl .foo
.align 2
.csect foo[DS]
.long .foo
.long TOC[TC0]
.long 0
and symbol table will as
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 DS DS 0 0
Change the code for the assembly path and xcoff objectfile patch for llc.
Reviewers: Jason Liu
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D76162
Summary:
- Even though the bindless surface/texture interfaces are promoted,
there are still code using surface/texture references. For example,
[PR#26400](https://bugs.llvm.org/show_bug.cgi?id=26400) reports the
compilation issue for code using `tex2D` with texture references. For
better compatibility, this patch proposes the support of
surface/texture references.
- Due to the absent documentation and magic headers, it's believed that
`nvcc` does use builtins for texture support. From the limited NVVM
documentation[^nvvm] and NVPTX backend texture/surface related
tests[^test], it's believed that surface/texture references are
supported by replacing their reference types, which are annotated with
`device_builtin_surface_type`/`device_builtin_texture_type`, with the
corresponding handle-like object types, `cudaSurfaceObject_t` or
`cudaTextureObject_t`, in the device-side compilation. On the host
side, that global handle variables are registered and will be
established and updated later when corresponding binding/unbinding
APIs are called[^bind]. Surface/texture references are most like
device global variables but represented in different types on the host
and device sides.
- In this patch, the following changes are proposed to support that
behavior:
+ Refine `device_builtin_surface_type` and
`device_builtin_texture_type` attributes to be applied on `Type`
decl only to check whether a variable is of the surface/texture
reference type.
+ Add hooks in code generation to replace that reference types with
the correponding object types as well as all accesses to them. In
particular, `nvvm.texsurf.handle.internal` should be used to load
object handles from global reference variables[^texsurf] as well as
metadata annotations.
+ Generate host-side registration with proper template argument
parsing.
---
[^nvvm]: https://docs.nvidia.com/cuda/pdf/NVVM_IR_Specification.pdf
[^test]: https://raw.githubusercontent.com/llvm/llvm-project/master/llvm/test/CodeGen/NVPTX/tex-read-cuda.ll
[^bind]: See section 3.2.11.1.2 ``Texture reference API` in [CUDA C Programming Guide](https://docs.nvidia.com/cuda/pdf/CUDA_C_Programming_Guide.pdf).
[^texsurf]: According to NVVM IR, `nvvm.texsurf.handle` should be used. But, the current backend doesn't have that supported. We may revise that later.
Reviewers: tra, rjmccall, yaxunl, a.sidorin
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76365
Summary:
The PC_32 DWARF register is for a 32-bit process address space which we
don't implement in AMDGCN; another way of putting this is that the size
of the PC register is not a function of the wavefront size. If we ever
implement a 32-bit process address space we will need to add two more
DwarfFlavours i.e. we will need to represent the product of (wave32,
wave64) x (64-bit address space, 32-bit address space).
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76732
Summary:
The gdb pretty printer misprints variables declared via
using declarations of the form:
namespace foo {
using string_view = std::string_view;
string_view bar;
}
This change fixes that, by deferring the decision to ignore
types not inside std until after desugaring.
Reviewers: #libc!
Subscribers: broadwaylamb, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D76816
1.Add instructions to update author when committing other's patch
We have updated DeveloperPolicy to show how to change author in
https://reviews.llvm.org/D72468
We should also update Phabricator page to include such infomation,
in case people follow the steps here and forget to update author info.
2. Replace `git llvm push` with `git push`
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D76718
Summary:
This adds a test for D76752. Now the global section comes after the
event section, and this change makes sure it is satisfied.
Reviewers: sbc100, tlively
Reviewed By: tlively
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76823
With commit 4d60f47 VectorOps was renamed to Vector and the naming of
the CMake target was adjusted. With commit 363dd3f QuantOps was
renamed to Quant, but the naming of the CMake target is left
untouched. This renames the CMake target.
Summary:
When ASan reports an issue the contents of the system log buffer
(`error_message_buffer`) get flushed to the system log (via
`LogFullErrorReport()`). After this happens the buffer is not cleared
but this is usually fine because the process usually exits soon after
reporting the issue.
However, when ASan runs in `halt_on_error=0` mode execution continues
without clearing the buffer. This leads to problems if more ASan
issues are found and reported.
1. Duplicate ASan reports in the system log. The Nth (start counting from 1)
ASan report will be duplicated (M - N) times in the system log if M is the
number of ASan issues reported.
2. Lost ASan reports. Given a sufficient
number of reports the buffer will fill up and consequently cannot be appended
to. This means reports can be lost.
The fix here is to reset `error_message_buffer_pos` to 0 which
effectively clears the system log buffer.
A test case is included but unfortunately it is Darwin specific because
querying the system log is an OS specific activity.
rdar://problem/55986279
Reviewers: kubamracek, yln, vitalybuka, kcc, filcab
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D76749
It's common in many dialects to use tensors to themselves hold tensor shapes (for example, the shape is itself the result of some non-trivial calculation). Currently, such dialects have to use `tensor<?xi64>` or worse (like allowing either i32 or i64 tensors to represent shapes). `tensor<?xindex>` is the natural type to represent this, but is currently disallowed. This patch allows it.
Differential Revision: https://reviews.llvm.org/D76726
Summary:
Provide a public VectorConvertToLLVMPattern utility class to implement
conversions with automatic unrolling of operation on multidimensional vectors
to lists of operations on single-dimensional vectors when lowering to the LLVM
dialect. Drop the template-based check on the number of operands since the
actual implementation does not depend on the operand number anymore. This check
only creates spurious concepts (UnaryOpLowering, BinaryOpLowering, etc).
Differential Revision: https://reviews.llvm.org/D76865
Summary:
The Standard-to-LLVM dialect convresion has a set of utility classes that
simplify conversions, including patterns that provide one-to-one conversion
operation conversion with optional result packing. Expose these classes in a
public header so that conversions other than Standard-to-LLVM (e.g. vectors, or
LLVM-based intrinsics) could also use them. Since the patterns are implemented
as class templates and in order to keep the code size limited, keep the
implementation private by resorting to op identifiers instead of template-based
builders.
Differential Revision: https://reviews.llvm.org/D76864
Summary:
There's no unwinding functionality on Android that allows for line
numbers to be retrieved in-process. As a result, we can't have
this backtrace test run on Android.
Cleanup the test to use optnone functions instead, which is more stable
than line numbers anyway.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: #sanitizers, morehouse, cferris
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D76807
For multi-generator builds like MSVC and Xcode, the install source and
destination of the lldb-python-scripts target contains configuration
dependent paths and therefore need to be substituted.
Differential revision: https://reviews.llvm.org/D76827
There was a misisng space between the -march and --cuda-gpu-arch
arguments, so --cuda-gpu-arch wasn't actually being parsed. I'm not
sure what the intent of the sm_10 run lines were, but they error as an
unsupported architecture. Switch these to something else.
Summary:
The linker is free to relax this (relocation R_PPC_GOT_TPREL16) against
R_PPC_TLS, if it sees fit (initial exec to local exec). If r0 is used,
this can generate execution-invalid code (converts to 'addi %rX, %r0,
FOO, which translates in PPC-lingo to li %rX, FOO). Forbid this
instead.
This fixes static binaries using locales on FreeBSD/powerpc
(tested on FreeBSD/powerpcspe).
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D76662
Those fields inside of the global variable can be local variables because
they are used in only inside of one function: request_launch for launch_info
and request_attach for attach_info.
To avoid confusion an already existing local variable attach_info of
request_attach has been renamed to better reflect its purpose.
Differential Revision: https://reviews.llvm.org/D76593
As discussed on PR31443, we should be trying to use PACKUS for binary truncation patterns to reduce the number of shuffles.
The plan is to support AVX2+ targets once we've worked around PR45315 - we fail to peek through a VBROADCAST_LOAD mask to recognise zero upper bits in a PACKUS pattern.
We should also be able to add support for v8i16 and possibly 256/512-bit vectors as well.
```
// llvm-objdump -d output (before)
0: bl .-4
4: bl .+0
8: bl .+4
// llvm-objdump -d output (after) ; GNU objdump -d
0: bl 0xfffffffc / bl 0xfffffffffffffffc
4: bl 0x4
8: bl 0xc
```
Many Operand's are not annotated as OPERAND_PCREL.
They are not affected (e.g. `b .+67108860`). I plan to fix them in future patches.
Modified test/tools/llvm-objdump/ELF/PowerPC/branch-offset.s to test
address space wraparound for powerpc32 and powerpc64.
Reviewed By: sfertile, jhenderson
Differential Revision: https://reviews.llvm.org/D76591
The error previously talked about a "section header" but was actually
referring to a program header.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D76846
```
// llvm-objdump -d output (before)
400000: e8 0b 00 00 00 callq 11
400005: e8 0b 00 00 00 callq 11
// llvm-objdump -d output (after)
400000: e8 0b 00 00 00 callq 0x400010
400005: e8 0b 00 00 00 callq 0x400015
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
400000: e8 0b 00 00 00 callq 400010
400005: e8 0b 00 00 00 callq 400015
```
In llvm-objdump, we pass the address of the next MCInst. Ideally we
should just thread the address of the current address, unfortunately we
cannot call X86MCCodeEmitter::encodeInstruction (X86MCCodeEmitter
requires MCInstrInfo and MCContext) to get the length of the MCInst.
MCInstPrinter::printInst has other callers (e.g llvm-mc -filetype=asm, llvm-mca) which set Address to 0.
They leave MCInstPrinter::PrintBranchImmAsAddress as false and this change is a no-op for them.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76580
This reverts commit 0788acbccb.
This reverts commit c2d7a1f79cedfc9fcb518596aa839da4de0adb69: Revert "[clangd] Add test for FindTarget+RecoveryExpr (which already works). NFC"
It causes a crash on invalid code:
class X {
decltype(unresolved()) foo;
};
constexpr int s = sizeof(X);
Summary:
Some compressed instructions match against negative values; store
immediates as a signed value such that these patterns will now match
the intended instructions.
Reviewers: asb, lenary, PaoloS
Reviewed By: asb
Subscribers: rbar, johnrusso, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76767
Follow-up of D72172 and D72180
This patch passes `uint64_t Address` to print methods of PC-relative
operands so that subsequent target specific patches can change
`*InstPrinter::print{Operand,PCRelImm,...}` to customize the output.
Add MCInstPrinter::PrintBranchImmAsAddress which is set to true by
llvm-objdump.
```
// Current llvm-objdump -d output
aarch64: 20000: bl #0
ppc: 20000: bl .+4
x86: 20000: callq 0
// Ideal output
aarch64: 20000: bl 0x20000
ppc: 20000: bl 0x20004
x86: 20000: callq 0x20005
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
aarch64: 20000: bl 20000
ppc: 20000: bl 0x20004
x86: 20000: callq 20005
```
In `lib/Target/X86/X86GenAsmWriter1.inc` (generated by `llvm-tblgen -gen-asm-writer`):
```
case 12:
// CALL64pcrel32, CALLpcrel16, CALLpcrel32, EH_SjLj_Setup, JCXZ, JECXZ, J...
- printPCRelImm(MI, 0, O);
+ printPCRelImm(MI, Address, 0, O);
return;
```
Some targets have 2 `printOperand` overloads, one without `Address` and
one with `Address`. They should annotate derived `Operand` properly with
`let OperandType = "OPERAND_PCREL"`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76574
Originally commited in rG57b8a407493c34c3680e7e1e4cb82e097f43744a, but
it broke the modules bot. This is solved by putting the contructors of
the CheckerManager class to the Frontend library.
Differential Revision: https://reviews.llvm.org/D75360
Alexey Bataev