Currently, findUnwindSectionsByPhdr is slightly micro-optimized for the
case where the first callback has the target address, and is otherwise
very inefficient -- it decodes .eh_frame_hdr even when no PT_LOAD
matches the PC. (If the FrameHeaderCache is enabled, then the
micro-optimization only helps the first time unwind info is looked up.)
Instead, it makes more sense to optimize for the case where the
callback *doesn't* find the target address, so search for a PT_LOAD
segment first, and only look for the unwind info section if a matching
PT_LOAD is found.
This change helps on an Android benchmark with 100 shared objects,
where the DSO at the end of the dl_iterate_phdr list throws 10000
exceptions. Assuming the frame cache is disabled, this change cuts
about 30-40% off the benchmark's runtime.
Reviewed By: compnerd, saugustine, #libunwind
Differential Revision: https://reviews.llvm.org/D87881
dl_iterate_phdr is used to search for unwind info provided by either
PT_GNU_EH_FRAME or PT_ARM_EXIDX. Most of the code between the two is
the same, so combine them, and factor out what's different into
checkForUnwindInfoSegment.
Details:
- The FrameHeaderCache can now be enabled for ARM EHABI.
- findUnwindSectionsByPhdr now finds the last PT_ARM_EXIDX rather than
the first. There should only be one segment.
- The dso_base and text_segment_length fields of UnwindInfoSections
are now needed for dl_iterate_phdr when using EHABI, to hold the
low and high PC values for a cache entry.
Reviewed By: compnerd, danielkiss, #libunwind, saugustine
Differential Revision: https://reviews.llvm.org/D87880
Configure default value of `LLVM_ENABLE_WARNINGS` in `HandleLLVMOptions.cmake`.
`LLVM_ENABLE_WARNINGS` is documented as ON by default, but `HandleLLVMOptions` assumes the default has been set somewhere else. If it has not been explicitly set, then `HandleLLVMOptions` implicitly uses OFF as a default.
This removes the various `option()` declarations in favor of a single declaration in `HandleLLVMOptions`. This will prevent the unwanted use of `-w` that is mentioned in a couple of the comments.
Reviewed By: DavidTruby, #libunwind, JDevlieghere, compnerd
Differential Revision: https://reviews.llvm.org/D87243
Unwinding leaf function is useful in cases when the backtrace finds a
leaf function for example when it caused a signal.
This patch also add the support for the DW_CFA_undefined because it marks
the end of the frames.
Ryan Prichard provided code for the tests.
Reviewed By: #libunwind, mstorsjo
Differential Revision: https://reviews.llvm.org/D83573
Reland with limit the test to the x86_64-linux target.
* When .eh_frame is located using .eh_frame_hdr (PT_GNU_EH_FRAME), the
start of .eh_frame is known, but not the size. In this case, the
unwinder must rely on a terminator present at the end of .eh_frame.
Set dwarf_section_length to UINTPTR_MAX to indicate this.
* Add a new field, text_segment_length, that the FrameHeaderCache uses
to track the size of the PT_LOAD segment indicated by dso_base.
* Compute ehSectionEnd by adding sectionLength to ehSectionStart,
never to fdeHint.
Fixes PR46829.
Differential Revision: https://reviews.llvm.org/D87750
Unwinding leaf function is useful in cases when the backtrace finds a
leaf function for example when it caused a signal.
This patch also add the support for the DW_CFA_undefined because it marks
the end of the frames.
Ryan Prichard provided code for the tests.
Reviewed By: #libunwind, mstorsjo
Differential Revision: https://reviews.llvm.org/D83573
The needs of back-deployment testing currently require two different
ways of running the test suite: one based on the deployment target,
and one based on the target triple. Since the triple includes all the
information we need, it's better to have just one way of doing things.
Furthermore, `--param platform=XXX` is also supersedded by using the
target triple. Previously, this parameter would serve the purpose of
controling XFAILs for availability markup errors, however it is possible
to achieve the same thing by using with_system_cxx_lib only and using
.verify.cpp tests instead, as explained in the documentation changes.
The motivation for this change is twofold:
1. This part of the Lit config has always been really confusing and
complicated, and it has been a source of bugs in the past. I have
simplified it iteratively in the past, but the complexity is still
there.
2. The deployment-target detection started failing in weird ways in
recent Clangs, breaking our CI. Instead of band-aid patching the
issue, I decided to remove the complexity altogether by using target
triples even on Apple platforms.
A follow-up to this commit will bring the test suite in line with
the recommended way of handling availability markup tests.
Previously, DwarfFDECache::findFDE used 0 as a special value meaning
"search the entire cache, including dynamically-registered FDEs".
Switch this special value to -1, which doesn't make sense as a DSO
base.
Fixes PR47335.
Reviewed By: compnerd, #libunwind
Differential Revision: https://reviews.llvm.org/D86748
Define a _LIBUNWIND_USE_DL_ITERATE_PHDR macro in config.h when there is
no other unwind info lookup method. Also define a
_LIBUNWIND_USE_DL_UNWIND_FIND_EXIDX macro to factor out
(__BIONIC__ and _LIBUNWIND_ARM_EHABI).
Differential Revision: https://reviews.llvm.org/D86768
Simplify:
defined(__ARM_DWARF_EH__) || !defined(__arm__)
to:
!defined(_LIBUNWIND_ARM_EHABI)
A later patch benefits from the simplicity. This change will result in
the two DWARF macros being defined when __USING_SJLJ_EXCEPTIONS__ is
defined, but:
* That's already the case with the __APPLE__ and _WIN32 clauses.
* That's also already the case with other architectures.
* With __USING_SJLJ_EXCEPTIONS__, most of the unwinder is #ifdef'ed
away.
Generally, when __USING_SJLJ_EXCEPTIONS__ is defined, most of the
libunwind code is removed by the preprocessor. e.g. None of the hpp
files are included, and almost all of the .c and .cpp files are defined
away, except in Unwind-sjlj.c. Unwind_AppleExtras.cpp is an exception
because it includes two hpp files, which it doesn't use. Remove the
unneeded includes for consistency with the general rule.
Reviewed By: steven_wu
Differential Revision: https://reviews.llvm.org/D86767
It isn't very wise to pass an assembly file to the compiler and tell it to compile as a C file and hope that the compiler recognizes it as assembly instead.
Simply don't mark the file as C and CMake will recognize the rest.
This was attempted earlier in https://reviews.llvm.org/D85706, but reverted due to architecture issues on Apple.
Subsequent digging revealed a similar change was done earlier for libunwind in https://reviews.llvm.org/rGb780df052dd2b246a760d00e00f7de9ebdab9d09.
Afterwards workarounds were added for MinGW and Apple:
* https://reviews.llvm.org/rGb780df052dd2b246a760d00e00f7de9ebdab9d09
* https://reviews.llvm.org/rGd4ded05ba851304b26a437896bc3962ef56f62cb
The workarounds in libunwind and compiler-rt are unified and comments added pointing to each other.
The workaround is updated to only be used for MinGW for CMake versions before 3.17, which fixed the issue (https://gitlab.kitware.com/cmake/cmake/-/merge_requests/4287).
Additionally fixed Clang not being passed as the assembly compiler for compiler-rt runtime build.
Example error:
[525/634] Building C object lib/tsan/CMakeFiles/clang_rt.tsan-aarch64.dir/rtl/tsan_rtl_aarch64.S.o
FAILED: lib/tsan/CMakeFiles/clang_rt.tsan-aarch64.dir/rtl/tsan_rtl_aarch64.S.o
/opt/tooling/drive/host/bin/clang --target=aarch64-linux-gnu -I/opt/tooling/drive/llvm/compiler-rt/lib/tsan/.. -isystem /opt/tooling/drive/toolchain/opt/drive/toolchain/include -x c -Wall -Wno-unused-parameter -fno-lto -fPIC -fno-builtin -fno-exceptions -fomit-frame-pointer -funwind-tables -fno-stack-protector -fno-sanitize=safe-stack -fvisibility=hidden -fno-lto -O3 -gline-tables-only -Wno-gnu -Wno-variadic-macros -Wno-c99-extensions -Wno-non-virtual-dtor -fPIE -fno-rtti -Wframe-larger-than=530 -Wglobal-constructors --sysroot=. -MD -MT lib/tsan/CMakeFiles/clang_rt.tsan-aarch64.dir/rtl/tsan_rtl_aarch64.S.o -MF lib/tsan/CMakeFiles/clang_rt.tsan-aarch64.dir/rtl/tsan_rtl_aarch64.S.o.d -o lib/tsan/CMakeFiles/clang_rt.tsan-aarch64.dir/rtl/tsan_rtl_aarch64.S.o -c /opt/tooling/drive/llvm/compiler-rt/lib/tsan/rtl/tsan_rtl_aarch64.S
/opt/tooling/drive/llvm/compiler-rt/lib/tsan/rtl/tsan_rtl_aarch64.S:29:1: error: expected identifier or '('
.section .text
^
1 error generated.
Differential Revision: https://reviews.llvm.org/D86308
* When _LIBUNWIND_SUPPORT_COMPACT_UNWIND is defined in config.h,
define it to "1" like the other macros. These macros are still
checked using "#if defined(...)", however.
* Include libunwind.h in AddressSpace.hpp before using
_LIBUNWIND_ARM_EHABI.
* Rename ProcessFrameHeaderCache to TheFrameHeaderCache, because some
configurations (e.g. Android / hermetic static libraries) can have
one cache per shared object in the process. (When there are more
copies, it's more important not to waste memory in the cache.)
* Add 3 missing header files to LIBUNWIND_HEADERS.
Differential Revision: https://reviews.llvm.org/D86254
Currently, the assembly functions for restoring register state have
been direct implementations of the Registers_*::jumpto() method
(contrary to the functions for saving register state, which are
implementations of the extern C function __unw_getcontext). This has
included having the assembly function name match the C++ mangling of
that method name (and having the function match the C++ member
function calling convention). To simplify the interface of the assembly
implementations, make the functions have C calling conventions and
name mangling.
This fixes building the library in with a MSVC C++ ABI with clang-cl,
which uses a significantly different method name mangling scheme.
(The library might not be of much use as C++ exception unwinder in such
an environment, but the libunwind.h interface for stepwise unwinding
still is usable, as is the _Unwind_Backtrace function.)
Differential Revision: https://reviews.llvm.org/D86041
The static_assert macro broke on GCC when a scope had two asserts and a
condition that depended on a template parameter. Remove the macro and
rely on the compiler's C++11 static_assert feature.
The __has_feature macro was only used here to determine whether to
define the static_assert macro.
Reviewed By: mstorsjo, #libunwind
Differential Revision: https://reviews.llvm.org/D86411
Currently, this function is present in the dynsym table of
libunwind.so (on ELF targets). Make the function static instead.
In the previous release (LLVM 10.x), this function was instead a lambda
function inside LocalAddressSpace::findUnwindSections, and because
LocalAddressSpace was marked with _LIBUNWIND_HIDDEN, the lambda
function was also a hidden symbol.
Differential Revision: https://reviews.llvm.org/D86372
When built in SEH mode, UnwindCursor contains a CONTEXT struct,
which is aligned to 16 bytes in most configurations, causing the
whole UnwindCursor object to have 16 byte alignment.
This fixes backtraces using _Unwind_Backtrace on x86_64 mingw,
where an unw_cursor_t allocated on the stack was misaligned before.
This is an ABI break for this struct for this configuration, but very
few callers call libunwind directly (and even fewer directly allocate
an unw_cursor_t anyway).
Differential Revision: https://reviews.llvm.org/D86102
Although it works fine with glibc, as currently implemented the
frameheader cache is incompatible with certain platforms with
slightly different locking semantics inside dl_iterate_phdr.
Therefore only enable it when it is turned on explicitly with
a configure-time option.
Differential Revision: https://reviews.llvm.org/D86163
Remove `_dyld_find_unwind_sections` implementation for macOS that is
10.6 or previous. 10.6 is no longer supported for TOT libunwind after
removing its libkeymgr dependency.
Reviewed By: mstorsjo, pete, #libunwind
Differential Revision: https://reviews.llvm.org/D86104
Before this patch the `ninja check-unwind` won't rebuild the unwind library.
Reviewed By: jroelofs
Differential Revision: https://reviews.llvm.org/D85004
Set -Wno-suggest-override where such warning is provided
by the compiler when building libunwind, alongside libcxx
and libcxxabi, using recent Clang. This extends behavior
introduced in 77e0e9e17d
to libunwind, avoiding a large amount of warnings during
builds. See D84126 for the original patch.
Libunwind uses _LIBUNWIND_IS_BAREMETAL in a lot of places but there is no cmake variable to set it. This patch adds such a variable. It is quite like what LIBCXXABI_BAREMETAL does in libcxxabi.
Reviewed By: compnerd, #libunwind
Differential Revision: https://reviews.llvm.org/D84759
keymgr used to be used on MacOSX <= 10.6, however we don't build libunwind
from scratch for such old systems anymore. Hence, this code isn't useful
anymore.
Differential Revision: https://reviews.llvm.org/D84677
Previously, for large-enough values, getSLEB128 would attempt to shift
a signed int in the range [0..0x7f] by 28, 35, 42... bits, which is
undefined behavior and likely to fail.
Avoid shifting (-1ULL) by 70 for large values. e.g. For INT64_MAX, the
last two bytes will be:
- 0x7f [bit==56]
- 0x00 [bit==63]
Differential Revision: https://reviews.llvm.org/D83742
- For CIE version 1 (e.g. in DWARF 2.0.0), the return_address_register
field is a ubyte [0..255].
- For CIE version 3 (e.g. in DWARF 3), the field is instead a ULEB128
constant.
Previously, libunwind accepted a CIE version of 1 or 3, but always
parsed the field as ULEB128.
Clang always outputs CIE version 1 into .eh_frame. (It can output CIE
version 3 or 4, but only into .debug_frame.)
Differential Revision: https://reviews.llvm.org/D83741
As announced on libcxx-dev at [1], the old libc++ testing format is being
removed in favour of the new one. Follow-up commits will clean up the
code that is dead after the removal of this option.
[1]: http://lists.llvm.org/pipermail/libcxx-dev/2020-June/000885.html
Add missing `operator!=` and make `operator-` const for
`EHABISectionIterator`. This repairs the build of libunwind when
building with GCC.
Patch by Chad Duffin!
Reviewed By: compnerd, libunwind
Differential Revision: https://reviews.llvm.org/D81597
Summary:
This allows unwinding to work across signal handler frames where the IP of the previous frame is not the same as the current value of the RA register. This is particularly useful for acquiring backtraces from signal handlers.
I kept the size of the context structure the same to avoid ABI breakage; the PC is stored in the previously unused slot for register 0.
Reviewers: #libunwind, mhorne, lenary, luismarques, arichardson, compnerd
Reviewed By: #libunwind, mhorne, lenary, compnerd
Subscribers: kamleshbhalui, jrtc27, bsdjhb, arichardson, compnerd, simoncook, kito-cheng, shiva0217, rogfer01, rkruppe, psnobl, benna, Jim, s.egerton, sameer.abuasal, evandro, llvm-commits, libcxx-commits
Tags: #libunwind, #llvm
Differential Revision: https://reviews.llvm.org/D78931
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
0e04342ae0 simplified exceptions-related configurations for libc++abi
and libunwind by reusing the logic in libc++. However, it missed the fact
that libc++abi and libunwind were overriding libc++'s handling of exceptions.
This commit removes special handling in libc++abi and libunwind to use
the logic in libc++, which is the right one.
First, libc++abi doesn't need to add the no-exceptions Lit feature itself,
since that is already done in the config.py for libc++, which it reuses.
Specifically, config.enable_exceptions is set based on @LIBCXXABI_ENABLE_EXCEPTIONS@
in libc++abi's lit.cfg.in, and libc++'s config.py handles that correctly.
Secondly, libunwind's LIBUNWIND_ENABLE_EXCEPTIONS is never set (it's
probably a remnant of copy-pasting code between the runtime libraries),
so the library is always built with exceptions disabled (which makes
sense since it implements the runtime support for exceptions).
Conversely, the test suite is always run with exceptions enabled
(not sure why), but that is preserved by the default behavior of
libc++'s config.py.
The ARM specific code was trying to determine endianness using the
`__LITTLE_ENDIAN__` macro which is not guaranteed to be defined.
When not defined, it makes libunwind to build the big-endian code even
when the compiler builds for a little-endian target.
This change allows building libunwind with the `musl-gcc` toolchain
which does not define `__LITTLE_ENDIAN__`. Use `__BYTE_ORDER__`
instead.
Patch by Idan Freiberg!
Add a missing guard for `_LIBUNWIND_NO_HEAP` around code dealing with the
`.cfi_remember_state` and `.cfi_restore_state` instructions.
Patch by Amanieu d'Antras!
Android doesn't have a libgcc_s and uses libgcc instead, so adjust the
build accordingly. This matches compiler-rt's build setup. libc++abi and
libunwind were already checking for libgcc but in a different context.
This change makes them search only for libgcc on Android now, but the
code to link against libgcc if it were present was already there.
Reviewed By: #libc, #libc_abi, #libunwind, rprichard, srhines
Differential Revision: https://reviews.llvm.org/D78787
Instead of having different names for the same Lit feature accross code
bases, use the same name everywhere. This NFC commit is in preparation
for a refactor where all three projects will be using the same Lit
feature detection logic, and hence it won't be convenient to use
different names for the feature.
Differential Revision: https://reviews.llvm.org/D78370
The new format should be equivalent to the old format, and it is now the
default format when running the libc++ and libc++abi tests. This commit
changes the libunwind tests to use the new format by default too. If
unexpected failures are discovered, it should be fine to revert this
commit until they are addressed.
Also note that it is still possible to use the old format by passing
`--param=use_old_format=True` when running Lit for the time being.
Differential Revision: https://reviews.llvm.org/D77733
`__aarch64__` is defined for the target (since the beginning of arm64 support: clang 3.5).
`__arm64__` is only defined for the Darwin OS on AArch64.
`defined(__aarch64__) || defined(__arm64__)` can be simplied as `defined(__aarch64__)`
Darwin AArch64 uses %% as the assembly separator (see AArch64MCAsmInfo.cpp).
Make the intention explicit in src/assembly.h
With this change, the libunwind code base has no reference of `__arm64__`/`__arm64`.
Reviewed By: #libunwind, ldionne, mstorsjo
Differential Revision: https://reviews.llvm.org/D77829
The LIT substitutions used in libunwind are the same as those from
libc++, and we forgot to update the libunwind tests after the libc++
substitutions started being delimited by braces.
When the EHHeaderInfo object filled by decodeEHHdr has fde_count == 0,
findFDE does the following:
- sets low = 0 and len = hdrInfo.fde_count as a preparation to start a
binary search
- because len is 0, the binary search loop is skipped
- the code still tries to find a table entry at
hdrInfo.table + low * tableEntrySize, and decode it.
This is wrong when fde_count is 0, and trying to decode a table entry
that isn't there will lead to reading garbage offsets and can cause
segfaults.
Differential Revision: https://reviews.llvm.org/D77679
Ryan Prichard