Noticed in D56011 - handle the case that scalar fp ops are quicker on P3 than P4
Add the other costs so that we're not relying on the default "is legal/custom" cost logic.
llvm-svn: 350403
GetPointerBaseWithConstantOffset include this code, where ByteOffset
and GEPOffset are both of type llvm::APInt :
ByteOffset += GEPOffset.getSExtValue();
The problem with this line is that getSExtValue() returns an int64_t, but
the += matches an overload for uint64_t. The problem is that the resulting
APInt is no longer considered to be signed. That in turn causes assertion
failures later on if the relevant pointer type is > 64 bits in width and
the GEPOffset was negative.
Changing it to
ByteOffset += GEPOffset.sextOrTrunc(ByteOffset.getBitWidth());
resolves the issue and explicitly performs the sign-extending
or truncation. Additionally, instead of asserting later if the result
is > 64 bits, it breaks out of the loop in that case.
See also
https://reviews.llvm.org/D24729https://reviews.llvm.org/D24772
This commit must be merged after D38662 in order for the test to pass.
Patch by Michael Ferguson <mpfergu@gmail.com>.
Reviewers: reames, sanjoy, hfinkel
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D38501
llvm-svn: 350395
Doing this late so we will prefer to fold the AND into a masked comparison first. That can be better for the live range of the mask register.
Differential Revision: https://reviews.llvm.org/D56246
llvm-svn: 350374
This would show up if we fix horizontal reductions to narrow as they go along,
but it's an improvement for size and/or Jaguar (fast-hops) independent of that.
We need to do this late to not interfere with other pattern matching of larger
horizontal sequences.
We can extend this to integer ops in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D56011
llvm-svn: 350369
Summary:
Irreducible control flow is not that rare, e.g. it happens in malloc and
3 other places in the libc portions linked in to a hello world program.
This patch improves how we handle that code: it emits a br_table to
dispatch to only the minimal necessary number of blocks. This reduces
the size of malloc by 33%, and makes it comparable in size to asm2wasm's
malloc output.
Added some tests, and verified this passes the emscripten-wasm tests run
on the waterfall (binaryen2, wasmobj2, other).
Reviewers: aheejin, sunfish
Subscribers: mgrang, jgravelle-google, sbc100, dschuff, llvm-commits
Differential Revision: https://reviews.llvm.org/D55467
Patch by Alon Zakai (kripken)
llvm-svn: 350367
Summary:
The previously introduced new operand type for br_table didn't have
a disassembler implementation, causing an assert.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56227
llvm-svn: 350366
Summary:
Instead of asserting on certain kinds of malformed instructions, it
now still print, but instead adds an annotation indicating the
problem, and/or indicates invalid_type etc.
We're using the InstPrinter from many contexts that can't always
guarantee values are within range (e.g. the disassembler), where having
output is more valueable than asserting.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56223
llvm-svn: 350365
This tests a case where we need to be able to compute sign bits for two insert_subvectors that is a liveout of a basic block. The result is then used as a boolean vector in another basic block.
llvm-svn: 350359
These are similar patterns, but when you throw AVX512 onto the pile,
the number of variations explodes. For FP, we really don't care about
AVX1 vs. AVX2 for FP ops. There may be some superficial shuffle diffs,
but that's not what we're testing for here, so I removed those RUNs.
Separating by type also lets us specify 'sse3' for the FP file vs. 'ssse3'
for the integer file...because x86.
llvm-svn: 350357
As noted in PR39973 and D55558:
https://bugs.llvm.org/show_bug.cgi?id=39973
...this is a partial implementation of a fold that we do as an IR canonicalization in instcombine:
// extelt (binop X, Y), Index --> binop (extelt X, Index), (extelt Y, Index)
We want to have this in the DAG too because as we can see in some of the test diffs (reductions),
the pattern may not be visible in IR.
Given that this is already an IR canonicalization, any backend that would prefer a vector op over
a scalar op is expected to already have the reverse transform in DAG lowering (not sure if that's
a realistic expectation though). The transform is limited with a TLI hook because there's an
existing transform in CodeGenPrepare that tries to do the opposite transform.
Differential Revision: https://reviews.llvm.org/D55722
llvm-svn: 350354
Detailed description: SIFoldOperands::foldInstOperand iterates over the
operand uses calling the function that changes def-use iteratorson the
way. As a result loop exits immediately when def-use iterator is
changed. Hence, the operand is folded to the very first use instruction
only. This makes VGPR live along the whole basic block and increases
register pressure significantly. The performance drop observed in SHOC
DeviceMemory test is caused by this bug.
Proposed fix: collect uses to separate container for further processing
in another loop.
Testing: make check-llvm
SHOC performance test.
Reviewers: rampitec, ronlieb
Differential Revision: https://reviews.llvm.org/D56161
llvm-svn: 350350
It was added in r257236 but then the one use was removed in r309517. Since no
test should call %host_cc, remove the pattern.
Differential Revision: https://reviews.llvm.org/D56200
llvm-svn: 350348
Follow up for D53051
This patch introduces the tool associated with the ELF implementation of
TextAPI (previously llvm-tapi, renamed for better distinction). This
tool will house a number of features related to enalysis and
manipulation of shared object's exposed interfaces. The first major
feature for this tool is support for producing binary stubs that are
useful for compile-time linking of shared objects. This patch introduces
beginnings of support for reading binary ELF objects to work towards
that goal.
Added:
- elfabi tool.
- support for reading architecture from a binary ELF file into an
ELFStub.
- Support for writing .tbe files.
Differential Revision: https://reviews.llvm.org/D55352
llvm-svn: 350341
Summary:
Fix EntrySize, Size, and Align before doing layout calculation.
As a side cleanup, this removes a dependence on sizeof(Elf_Sym) within BinaryReader, so we can untemplatize that.
This unblocks a cleaner implementation of handling the -O<format> flag. See D53667 for a previous attempt. Actual implementation of the -O<format> flag will come in an upcoming commit, this is largely a NFC (although not _totally_ one, because alignment on binary input was actually wrong before).
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56211
llvm-svn: 350336
Use range instead of xrange whenever possible. The extra list creation in Python2
is generally not a performance bottleneck.
Differential Revision: https://reviews.llvm.org/D56253
llvm-svn: 350309
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
Summary:
Keeping msan a function pass requires replacing the module level initialization:
That means, don't define a ctor function which calls __msan_init, instead just
declare the init function at the first access, and add that to the global ctors
list.
Changes:
- Pull the actual sanitizer and the wrapper pass apart.
- Add a newpm msan pass. The function pass inserts calls to runtime
library functions, for which it inserts declarations as necessary.
- Update tests.
Caveats:
- There is one test that I dropped, because it specifically tested the
definition of the ctor.
Reviewers: chandlerc, fedor.sergeev, leonardchan, vitalybuka
Subscribers: sdardis, nemanjai, javed.absar, hiraditya, kbarton, bollu, atanasyan, jsji
Differential Revision: https://reviews.llvm.org/D55647
llvm-svn: 350305
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
Summary:
The commit rL348922 introduced a means to set Metadata
section kind for a global variable, if its explicit section
name was prefixed with ".AMDGPU.metadata.".
This patch changes that prefix to ".AMDGPU.comment.",
as "metadata" in the section name might lead to
ambiguity with metadata used by AMD PAL runtime.
Change-Id: Idd4748800d6fe801441d91595fc21e5a4171e668
Reviewers: kzhuravl
Reviewed By: kzhuravl
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D56197
llvm-svn: 350292
A DBG_VALUE between a two-address instruction and a following COPY
would prevent rescheduleMIBelowKill optimization inside
TwoAddressInstructionPass.
Differential Revision: https://reviews.llvm.org/D55987
llvm-svn: 350289
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
The test cases are constructed to avoid folding the AND into a masked compare operation.
Currently we emit a KAND and a KORTEST for these cases.
llvm-svn: 350287
When switched to the MI scheduler for P9, the hardware is modeled as out of order.
However, inside the MI Scheduler algorithm, we still use the in-order scheduling model
as the MicroOpBufferSize isn't set. The MI scheduler take it as the hw cannot buffer
the op. So, only when all the available instructions issued, the pending instruction
could be scheduled. That is not true for our P9 hw in fact.
This patch is trying to enable the Out-of-Order scheduling model. The buffer size 44 is
picked from the P9 hw spec, and the perf test indicate that, its value won't hurt the cpu2017.
With this patch, there are 3 specs improved over 3% and 1 spec deg over 3%. The detail is as follows:
x264_r: +6.95%
cactuBSSN_r: +6.94%
lbm_r: +4.11%
xz_r: -3.85%
And the GEOMEAN for all the C/C++ spec in spec2017 is about 0.18% improved.
Reviewer: Nemanjai
Differential Revision: https://reviews.llvm.org/D55810
llvm-svn: 350285
OptimizeAutoreleaseRVCall skips optimizing llvm.objc.autoreleaseReturnValue if it
sees a user which is llvm.objc.retainAutoreleasedReturnValue, and if they have
equivalent arguments (either identical or equivalent PHIs). It then assumes that
ObjCARCOpt::OptimizeRetainRVCall will optimize the pair instead.
Trouble is, ObjCARCOpt::OptimizeRetainRVCall doesn't know about equivalent PHIs
so optimizes in a different way and we are left with an unoptimized llvm.objc.autoreleaseReturnValue.
This teaches ObjCARCOpt::OptimizeRetainRVCall to also understand PHI equivalence.
rdar://problem/47005143
Reviewed By: ahatanak
Differential Revision: https://reviews.llvm.org/D56235
llvm-svn: 350284
Summary:
Sometimes it's useful to emit assembly after LTO stage to modify it manually. Emitting precodegen bitcode file (via save-temps plugin option) and then feeding it to llc doesn't always give the same binary as original.
This patch is simpler alternative to https://reviews.llvm.org/D24020.
Patch by Denis Bakhvalov.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: MaskRay, inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56114
llvm-svn: 350276
Summary:
This was previously ignored and an incorrect value generated.
Also fixed Disassembler's handling of block_type.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56092
llvm-svn: 350270
Summary:
Alias can make one (but not all) live, we still need to scan all others if this symbol is reachable
from somewhere else.
Reviewers: tejohnson, grimar
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56117
llvm-svn: 350269
The caller to EraseInstruction had this conditional:
// ARC calls with null are no-ops. Delete them.
if (IsNullOrUndef(Arg))
but the assert inside EraseInstruction only allowed ConstantPointerNull and not
undef or bitcasts.
This adds support for both of these cases.
rdar://problem/47003805
llvm-svn: 350261
If an instruction has no demanded bits, remove it directly during BDCE,
instead of leaving it for something else to clean up.
Differential Revision: https://reviews.llvm.org/D56185
llvm-svn: 350257
INC/DEC are pretty much the same as ADD/SUB except that they don't update the C flag.
This patch removes the special nodes and just pattern matches from ADD/SUB during isel if the C flag isn't being used.
I had to avoid selecting DEC is the result isn't used. This will become a SUB immediate which will turned into a CMP later by optimizeCompareInstr. This lead to the one test change where we use a CMP instead of a DEC for an overflow intrinsic since we only checked the flag.
This also exposed a hole in our RMW flag matching use of hasNoCarryFlagUses. Our root node for the match is a store and there's no guarantee that all the flag users have been selected yet. So hasNoCarryFlagUses needs to check copyToReg and machine opcodes, but it also needs to check for the pre-match SETCC, SETCC_CARRY, BRCOND, and CMOV opcodes.
Differential Revision: https://reviews.llvm.org/D55975
llvm-svn: 350245
Currently we expand the two nodes separately. This gives DAG combiner an opportunity to optimize the expanded sequence taking into account only one set of users. When we expand the other node we'll create the expansion again, but might not be able to optimize it the same way. So the nodes won't CSE and we'll have two similarish sequences in the same basic block. By expanding both nodes at the same time we'll avoid prematurely optimizing the expansion until both the division and remainder have been replaced.
Improves the test case from PR38217. There may be additional opportunities after this.
Differential Revision: https://reviews.llvm.org/D56145
llvm-svn: 350239
Adding MC regressions tests to cover the XOP isa set.
This patch is part of a larger task to cover MC encoding of all X86 isa sets started in revision: https://reviews.llvm.org/D39952
Differential Revision: https://reviews.llvm.org/D41392
llvm-svn: 350237
By also promoting the input type we get a better idea for what scalar type to use. This can provide better results if the result of the extract is sign extended. What was previously happening is that the extract result would be legalized, sometime later the input of the sign extend would be legalized using the result of the extract. Then later the extract input would be legalized forcing a truncate into the input of the sign extend using a replace all uses. This requires DAG combine to combine out the sext/truncate pair. But sometimes we visited the truncate first and messed things up before the sext could be combined.
By creating the extract with the correct scalar type when we create legalize the result type, the truncate will be added right away. Then when the sign_extend input is legalized it will create an any_extend of the truncate which can be optimized by getNode to maybe remove the truncate. And then a sign_extend_inreg. Now DAG combine doesn't have to worry about getting rid of the extend.
This fixes the regression on X86 in D56156.
Differential Revision: https://reviews.llvm.org/D56176
llvm-svn: 350236
If x has multiple sign bits than it doesn't matter which one we extend from so we can sext from x's msb instead.
The X86 setcc-combine.ll changes are a little weird. It appears we ended up with a (sext_inreg (aext (trunc (extractelt)))) after type legalization. The sext_inreg+aext now gets optimized by this combine to leave (sext (trunc (extractelt))). Then we visit the trunc before we visit the sext. This ends up changing the truncate to an extractvectorelt from a bitcasted vector. I have a follow up patch to fix this.
Differential Revision: https://reviews.llvm.org/D56156
llvm-svn: 350235
PPCPreEmitPeephole pass.
PPCPreEmitPeephole will convert a BC to B when the conditional branch is
based on a constant CR by CRSET or CRUNSET. This is added in
https://reviews.llvm.org/rL343100.
When the conditional branch is known to be always taken, all branches will
be removed and a new unconditional branch will be inserted. However, when
SeenUse is false the original patch will not remove the branches, but still
insert the new unconditional branch, update the successors and create
inconsistent IR. Compiling the synthetic testcase included can show the
problem we run into.
The patch simply removes the SeenUse condition when adding branches into
InstrsToErase set.
Differential Revision: https://reviews.llvm.org/D56041
llvm-svn: 350223
Peek through shift modulo masks while matching double shift patterns.
I was hoping to delay this until I could remove the X86 code with generic funnel shift matching (PR40081) but this will do for now.
Differential Revision: https://reviews.llvm.org/D56199
llvm-svn: 350222
Motivated by the discussion in D38499, this patch updates BasicAA to support
arbitrary pointer sizes by switching most remaining non-APInt calculations to
use APInt. The size of these APInts is set to the maximum pointer size (maximum
over all address spaces described by the data layout string).
Most of this translation is straightforward, but this patch contains a fix for
a bug that revealed itself during this translation process. In order for
test/Analysis/BasicAA/gep-and-alias.ll to pass, which is run with 32-bit
pointers, the intermediate calculations must be performed using 64-bit
integers. This is because, as noted in the patch, when GetLinearExpression
decomposes an expression into C1*V+C2, and we then multiply this by Scale, and
distribute, to get (C1*Scale)*V + C2*Scale, it can be the case that, even
through C1*V+C2 does not overflow for relevant values of V, (C2*Scale) can
overflow. If this happens, later logic will draw invalid conclusions from the
(base) offset value. Thus, when initially applying the APInt conversion,
because the maximum pointer size in this test is 32 bits, it started failing.
Suspicious, I created a 64-bit version of this test (included here), and that
failed (miscompiled) on trunk for a similar reason (the multiplication can
overflow).
After fixing this overflow bug, the first test case (at least) in
Analysis/BasicAA/q.bad.ll started failing. This is also a 32-bit test, and was
relying on having 64-bit intermediate values to have BasicAA return an accurate
result. In order to fix this problem, and because I believe that it is not
uncommon to use i64 indexing expressions in 32-bit code (especially portable
code using int64_t), it seems reasonable to always use at least 64-bit
integers. In this way, we won't regress our analysis capabilities (and there's
a command-line option added, so experimenting with this should be easy).
As pointed out by Eli during the review, there are other potential overflow
conditions that this patch does not address. Fixing those is left to follow-up
work.
Patch by me with contributions from Michael Ferguson (mferguson@cray.com).
Differential Revision: https://reviews.llvm.org/D38662
llvm-svn: 350220
This was added at a time when i1 was a legal type with avx512f and there was a bug. i1 is no longer considered a legal type with avx512f so there should be no codegen difference.
llvm-svn: 350203
The final piece of IR-level analysis to allow this was committed with:
rL350188
Using the intrinsics should improve transforms based on cost models
like vectorization and inlining.
The backend should be prepared too, so we can now canonicalize more
sequences of shift/logic to the intrinsics and know that the end
result should be equal or better to the original code even if the
target does not have an actual rotate instruction.
llvm-svn: 350199
This makes it easier to keep the LowerBRCOND and LowerSELECT code in sync with LowerXALUO so they always pick the same operation for overflowing instructions.
This is inspired by the helper functions used by ARM and AArch64 for the same purpose.
The test change is because LowerSELECT was not in sync with LowerXALUO with regard to INC/DEC for SADDO/SSUBO.
llvm-svn: 350198
This was added at a time when i1 was a legal type with avx512f and there was a bug. i1 is no longer considered a legal type with avx512f so there should be no codegen difference.
llvm-svn: 350195
When SADDO/SSUBO is used as a part of a condition, the X86 backend has to lower the instruction twice. One for the flags use and then once for the data use. These two selections should be kept in sync so they end up with one node providing the data and the flags. This doesn't seem to be happening for INC/DEC.
llvm-svn: 350194
To make it more obvious which part of the transformation is carried
out by BDCE. Also drop the CHECK-IO lines which only run -instsimplify
as they don't really seem meaningful if the main check doesn't run
-instsimplify either.
llvm-svn: 350189
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The previous attempt to land this lead to miscompiles, because cases
where uses were initially dead but were later found to be live during
further analysis were not always correctly removed from the DeadUses
set. This is fixed now and the added test case demanstrates such an
instance.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 350188
default
During the lowering of a switch that would result in the generation of a jump
table, a range check is performed before indexing into the jump table, for the
switch value being outside the jump table range and a conditional branch is
inserted to jump to the default block. In case the default block is
unreachable, this conditional jump can be omitted. This patch implements
omitting this conditional branch for unreachable defaults.
Review Reference: D52002
llvm-svn: 350186
Propagate HOME environment variable to unittests. This is necessary
to fix test failures resulting from pw_home pointing to a non-existing
directory while being overriden with HOME. Apparently Gentoo users
hit this sometimes when they override build directory for Portage.
Original bug report: https://bugs.gentoo.org/674088
Differential Revision: https://reviews.llvm.org/D56162
llvm-svn: 350175
MSan used to report false positives in the case the argument of
llvm.is.constant intrinsic was uninitialized.
In fact checking this argument is unnecessary, as the intrinsic is only
used at compile time, and its value doesn't depend on the value of the
argument.
llvm-svn: 350173
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
This seems to be getting in the way more than its helping. This does mean we stop scalarizing some cases, but I'm not convinced the scalarization was really better.
Some of the changes to vsel-cmp-load.ll are a regression but D56156 should fix it.
llvm-svn: 350159
This allows us to sign extend to v4i32 first. And then share that extension to implement the final steps to v4i64 using a pcmpgt and punpckl and punpckh.
We already do something similar for SIGN_EXTEND with -x86-experimental-vector-widening-legalization.
llvm-svn: 350158
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
The following code requests 64-bit PC-relative relocations unsupported
by MIPS ABI. Now it triggers an assertion. It's better to show an error
message.
```
foo:
.quad bar - foo
```
llvm-svn: 350152
This was tricking us into making these operations and then letting them get scalarized later. But I can't prove that the scalarized version is actually better.
llvm-svn: 350141
Previously we emitted a multiply and some masking that was supposed to matched to PMULUDQ, but the masking could sometimes be removed before we got a chance to match it. So instead just emit the PMULUDQ directly.
Remove the DAG combine that was added when the ReplaceNodeResults code was originally added. Add a new DAG combine to avoid regressions in shrink_vmul.ll
Some of the shrink_vmul.ll test cases now pick PMULUDQ instead of PMADDWD/PMULLD, but I think this should be an improvement on most CPUs.
I think all of this can go away if/when we switch to -x86-experimental-vector-widening-legalization
llvm-svn: 350134
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also moves to FeatureSB the old FeatureSpecRestrict.
Reviewers: pbarrio, olista01, t.p.northover, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55921
llvm-svn: 350126
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Create PMULDQ/PMULUDQ as long as the number of elements is a power of 2.
This seems to give some improvements in our ability to use SimplifyDemandedBits.
llvm-svn: 350084
Summary:
These instructions are currently unused in our backend, but for
completeness it is good to support them, so they can be used with
the assembler in hand-written code.
Tests are very basic, signature support missing much like other blocks.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55973
llvm-svn: 350079
Summary:
It does so using a simple nesting stack, and gives clear errors upon
violation. This is unique to wasm, since most CPUs do not have
any nested constructs.
Had to add an end of file check to the general assembler for this.
Note: if/else/end instructions are not currently supported in our
tablegen defs, so these tests will be enabled in a follow-up.
They already pass the nesting check.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55797
llvm-svn: 350078
Summary:
Existing LIR recognizes CTLZ where shifting input variable right until it is zero. (Shift-Until-Zero idiom)
This commit:
1. Augments Shift-Until-Zero idiom to recognize CTTZ where input variable is shifted left.
2. Prepare for BitScan idiom recognition.
Patch by Yuanfang Chen (tabloid.adroit)
Reviewers: craig.topper, evstupac
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55876
llvm-svn: 350074
Fixes crash reported after r347354 for frontends that don't always emit
'this' pointers for methods. Now we will silently produce debug info
that makes functions like this look like static methods, which seems
reasonable.
llvm-svn: 350073
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
This patch teaches LoopSimplifyCFG to remove dead exiting edges
from loops.
Differential Revision: https://reviews.llvm.org/D54025
Reviewed By: fedor.sergeev
llvm-svn: 350049
It's dangerous to knowingly create an illegal vector type
no matter what stage of combining we're in.
This prevents the missed folding/scalarization seen in:
https://bugs.llvm.org/show_bug.cgi?id=40146
llvm-svn: 350034
trunc (add X, C ) --> add (trunc X), C'
If we're throwing away the top bits of an 'add' instruction, do it in the narrow destination type.
This makes the truncate-able opcode list identical to the sibling transform done in IR (in instcombine).
This change used to show regressions for x86, but those are gone after D55494.
This gets us closer to deleting the x86 custom function (combineTruncatedArithmetic)
that does almost the same thing.
Differential Revision: https://reviews.llvm.org/D55866
llvm-svn: 350006
The missed load folding noticed in D55898 is visible independent of that change
either with an adjusted IR pattern to start or with AVX2/AVX512 (where the build
vector becomes a broadcast first; movddup is not produced until we get into isel
via tablegen patterns).
Differential Revision: https://reviews.llvm.org/D55936
llvm-svn: 350005
@bextr64_32_b1 is extracted from hotpath of real-world code
(RawSpeed BitStream<>::peekBitsNoFill()) after `clang -O3`.
@bextr64_32_b2/@bextr64_32_b0 is the same pattern,
but with trunc done last, showing how i think it can be handled:
https://rise4fun.com/Alive/K4Bhttps://rise4fun.com/Alive/qC9
It is possible that middle-end should do some of this, too.
https://bugs.llvm.org/show_bug.cgi?id=36419
llvm-svn: 349998
Summary:
The "single parameter" .file directive appears to be an ELF-only feature
that is intended to insert the main source filename into the string
table table.
I noticed that if you assemble an ELF .s file for COFF, typically it
will assert right away on a .file directive near the top of the file. My
first change was to make this emit a proper error in the asm parser so
that we don't assert so easily.
However, COFF actually does have some support for this directive, and if
you emit an object file, llvm-mc does not assert. When emitting a COFF
object, MC will take those file names and create "debug" symbol table
entries for them. I'm not familiar with these kinds of symbol table
entries, and I'm not aware of any users of them, but @compnerd added
them a while ago. They don't introduce absolute paths, and most main
source file paths are short enough that this extra entry shouldn't cause
any problems, so I enabled the flag in MCAsmInfoCOFF that indicates that
it's supported.
This has the side effect of adding an extra debug symbol to every object
produced by clang, which is a pretty big functional change. My question
is, should we keep the functionality or remove it in the name of symbol
table minimalism?
Reviewers: mstorsjo, compnerd
Subscribers: hiraditya, compnerd, llvm-commits
Differential Revision: https://reviews.llvm.org/D55900
llvm-svn: 349976
Originally committed in r349333, reverted in r349353.
GCC emitted these unconditionally on/before 4.4/March 2012
Clang emitted these unconditionally on/before 3.5/March 2014
This improves performance when parsing CUs (especially those using split
DWARF) that contain no code ranges (such as the mini CUs that may be
created by ThinLTO importing - though generally they should be/are
avoided, especially for Split DWARF because it produces a lot of very
small CUs, which don't scale well in a bunch of other ways too
(including size)).
The revert was due to a (Google internal) test that had some checked in old
object files missing DW_AT_ranges. That's since been fixed.
llvm-svn: 349968
This fixes the patterns that have or/and as a root. 'and' is handled differently since thy usually have a CMP wrapped around them.
I had to look for uses of the CF flag because all these nodes have non-standard CF flag behavior. A real or/xor would always clear CF. In practice we shouldn't be using the CF flag from these nodes as far as I know.
Differential Revision: https://reviews.llvm.org/D55813
llvm-svn: 349962
The BEXTR instruction documents the SF bit as undefined.
The TBM BEXTR instruction has the same issue, but I'm not sure how to test it. With the control being an immediate we can determine the sign bit is 0 or the BEXTR would have been removed.
Fixes PR40060
Differential Revision: https://reviews.llvm.org/D55807
llvm-svn: 349956
Summary:
Don't peel of the offset if the resulting base could possibly be negative in Indirect addressing.
This is because the M0 field is of unsigned.
This patch achieves the similar goal as https://reviews.llvm.org/D55241, but keeps the optimization
if the base is known unsigned.
Reviewers:
arsemn
Differential Revision:
https://reviews.llvm.org/D55568
llvm-svn: 349951
Summary:
BasicAA has special logic for unescaped allocas, which normally applies
equally well to dynamic and static allocas. However, llvm.stackrestore
has the power to end the lifetime of dynamic allocas, without referring
to them directly.
stackrestore is already marked with the most conservative memory
modification attributes, but because the alloca is not escaped, the
normal logic produces incorrect results. I think BasicAA needs a special
case here to teach it about the relationship between dynamic allocas and
stackrestore.
Fixes PR40118
Reviewers: gbiv, efriedma, george.burgess.iv
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D55969
llvm-svn: 349945
This is admittedly a narrow fix for the problem:
https://bugs.llvm.org/show_bug.cgi?id=37502
...but as the XOP restriction shows, it's a maze to get this right.
In the motivating example, note that we have movddup before SSE4.1 and
again with AVX2. That's because insertps isn't available pre-SSE41 and
vbroadcast is (more generally) available with AVX2 (and the splat is
reduced to movddup via isel pattern).
Differential Revision: https://reviews.llvm.org/D55898
llvm-svn: 349937
This adds support for widening G_FCEIL in LegalizerHelper and
AArch64LegalizerInfo. More specifically, it teaches the AArch64 legalizer to
widen G_FCEIL from a 16-bit float to a 32-bit float when the subtarget doesn't
support full FP 16.
This also updates AArch64/f16-instructions.ll to show that we perform the
correct transformation.
llvm-svn: 349927
This adds an AVX512 run as suggested in D55936.
The test didn't really belong with other build vector tests
because that's not the pattern here. I don't see much value
in adding 64-bit RUNs because they wouldn't exercise the
isel patterns that we're aiming to expose.
llvm-svn: 349920
-print-after IR printing generally can not print the IR unit (Loop or SCC)
which has just been invalidated by the pass. However, when working in -print-module-scope
mode even if Loop was invalidated there is still a valid module that we can print.
Since we can not access invalidated IR unit from AfterPassInvalidated instrumentation
point we can remember the module to be printed *before* pass. This change introduces
BeforePass instrumentation that stores all the information required for module printing
into the stack and then after pass (in AfterPassInvalidated) just print whatever
has been placed on stack.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D55278
llvm-svn: 349896
- When signing return addresses with -msign-return-address=<scope>{+<key>},
either the A key instructions or the B key instructions can be used. To
correctly authenticate the return address, the unwinder/debugger must know
which key was used to sign the return address.
- When and exception is thrown or a break point reached, it may be necessary to
unwind the stack. To accomplish this, the unwinder/debugger must be able to
first authenticate an the return address if it has been signed.
- To enable this, the augmentation string of CIEs has been extended to allow
inclusion of a 'B' character. Functions that are signed using the B key
variant of the instructions should have and FDE whose associated CIE has a 'B'
in the augmentation string.
- One must also be able to preserve these semantics when first stepping from a
high level language into assembly and then, as a second step, into an object
file. To achieve this, I have introduced a new assembly directive
'.cfi_b_key_frame ', that tells the assembler the current frame uses return
address signing with the B key.
- This ensures that the FDE is associated with a CIE that has 'B' in the
augmentation string.
Differential Revision: https://reviews.llvm.org/D51798
llvm-svn: 349895
It seems better to avoid using the callback if possible since
there are coverage assertions which are disabled if this is used.
Also fix missing tests. Only test the legal cases since it seems
legalization for build_vector is quite lacking.
llvm-svn: 349878
This saves materializing the immediate. The additional forms are less
common (they don't usually show up for bitfield insert/extract), but
they're still relevant.
I had to add a new target hook to prevent DAGCombine from reversing the
transform. That isn't the only possible way to solve the conflict, but
it seems straightforward enough.
Differential Revision: https://reviews.llvm.org/D55630
llvm-svn: 349857
If you don't do this, then if you hit a G_LOAD in getInstrMapping, you'll end
up with GPRs on the G_FCEIL instead of FPRs. This causes a fallback.
Add it to the switch, and add a test verifying that this happens.
llvm-svn: 349822
When deciding lazily whether a CU would be split or non-split I
accidentally dropped some handling for the line tables comp_dir (by
doing it lazily it was too late to be handled properly by the MC line
table code).
Move that bit of the code back to the non-lazy place.
llvm-svn: 349819
We have to treat constructs like this as if they were "symbolic", to use
the correct codepath to resolve them. This mostly only affects movz
etc. because the other uses of classifySymbolRef conservatively treat
everything that isn't a constant as if it were a symbol.
Differential Revision: https://reviews.llvm.org/D55906
llvm-svn: 349800
This requires a bit more code than other fixups, to distingush between
abs_g0/abs_g1/etc. Actually, I think some of the other fixups are
missing some checks, but I won't try to address that here.
I haven't seen any real-world code that uses a construct like this, but
it clearly should work, and we're considering using it in the
implementation of localescape/localrecover on Windows (see
https://reviews.llvm.org/D53540). I've verified that binutils produces
the same code as llvm-mc for the testcase.
This currently doesn't include support for the *_s variants (that
requires a bit more work to set the opcode).
Differential Revision: https://reviews.llvm.org/D55896
llvm-svn: 349799
If we found unsafe dependences other than 'unknown', we already know at
compile time that they are unsafe and the runtime checks should always
fail. So we can avoid generating them in those cases.
This should have no negative impact on performance as the runtime checks
that would be created previously should always fail. As a sanity check,
I measured the test-suite, spec2k and spec2k6 and there were no regressions.
Reviewers: Ayal, anemet, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D55798
llvm-svn: 349794
Emit static locals within the correct lexical scope so variables with the same
name will not confuse the debugger into getting the wrong value.
Differential Revision: https://reviews.llvm.org/D55336
llvm-svn: 349777
This patch enables funnel shift -> rotate building for all ROTL/ROTR custom/legal operations.
AFAICT X86 was the last target that was missing modulo support (PR38243), but I've tried to CC stakeholders for every target that has ROTL/ROTR custom handling for their final OK.
Differential Revision: https://reviews.llvm.org/D55747
llvm-svn: 349765
This is a update to D43157 to correctly handle fixup_riscv_pcrel_lo12.
Notable changes:
Rebased onto trunk
Handle and test S-type
Test case pcrel-hilo.s is merged into relocations.s
D43157 description:
VK_RISCV_PCREL_LO has to be handled specially. The MCExpr inside is
actually the location of an auipc instruction with a VK_RISCV_PCREL_HI fixup
pointing to the real target.
Differential Revision: https://reviews.llvm.org/D54029
Patch by Chih-Mao Chen and Michael Spencer.
llvm-svn: 349764
As discussed on D55894, this replaces the existing PADDS/PSUBUS intrinsics with the the sadd/ssub.sat generic intrinsics and moves the tests out of the x86 subfolder.
PR40110 has been raised to fix the regression with constant folding vectors containing undef elements.
llvm-svn: 349759
This patch fixes two deficiencies in current code that recognizes
the VLLEZ idiom:
- For the floating-point versions, we have ISel patterns that match
on a bitconvert as the top node. In more complex cases, that
bitconvert may already have been merged into something else.
Fix the patterns to match the inner nodes instead.
- For the 64-bit integer versions, depending on the surrounding code,
we may get either a DAG tree based on JOIN_DWORDS or one based on
INSERT_VECTOR_ELT. Use a PatFrags to simply match both variants.
llvm-svn: 349749
Current code in SystemZDAGToDAGISel::tryGather refuses to perform
any transformation if the Load SDNode has more than one use. This
(erronously) counts uses of the chain result, which prevents the
optimization in many cases unnecessarily. Fixed by this patch.
llvm-svn: 349748
We already have special code (DAG combine support for FP_ROUND)
to recognize cases where we an use a vector version of VLEDB to
perform two floating-point truncates in parallel, but equivalent
support for VLEDB (vector floating-point extends) has been
missing so far. This patch adds corresponding DAG combine
support for FP_EXTEND.
llvm-svn: 349746
Those intrinsics will be autoupgraded soon to @llvm.sadd.sat generics (D55894), so to keep a x86-specific case I'm replacing it with @llvm.x86.sse2.pmulhu.w
llvm-svn: 349739
These tools were assuming ABI version is 0,
that is not always true.
Patch teaches them to work with that field.
Differential revision: https://reviews.llvm.org/D55884
llvm-svn: 349737
LLVM treats void* pointers passed to assembly routines as pointers to
sized types.
We used to emit calls to __msan_instrument_asm_load() for every such
void*, which sometimes led to false positives.
A less error-prone (and truly "conservative") approach is to unpoison
only assembly output arguments.
llvm-svn: 349734
Summary:
This allows expanding {7,11,13,14,15,21,22,23,25,26,27,28,29,30,31}-byte memcmp
in just two loads on X86. These were previously calling memcmp.
Reviewers: spatel, gchatelet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55263
llvm-svn: 349731
Summary:
PowerPC has scalar selects (isel) and vector mask selects (xxsel). But PowerPC
does not have vector CR selects, PowerPC does not support scalar condition
selects on vectors.
In addition to implementing this hook, isSelectSupported() should return false
when the SelectSupportKind is ScalarCondVectorVal, so that predictable selects
are converted into branch sequences.
Reviewed By: steven.zhang, hfinkel
Differential Revision: https://reviews.llvm.org/D55754
llvm-svn: 349727
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
Summary:
This is a code size savings and is also important to get runnable code
while engines do not support v128.const.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55910
llvm-svn: 349724
Summary:
Gates v128.const, f32x4.sqrt, f32x4.div, i8x16.extract_lane_u, and
i16x8.extract_lane_u on the --wasm-enable-unimplemented-simd flag,
since these ops are not implemented yet in V8.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55904
llvm-svn: 349720
This code pattern is an unfortunate side effect of the way some types get split
at call lowering. Ideally we'd either not generate it at all or combine it away
in the legalizer artifact combiner.
Until then, add selection support anyway which is a significant proportion of
our current fallbacks on CTMark.
rdar://46491420
llvm-svn: 349712
Summary:
On non-Windows these are already removed by ShouldInstrumentGlobal.
On Window we will wait until we get actual issues with that.
Reviewers: pcc
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D55899
llvm-svn: 349707
Summary:
ICF prevented by removing unnamed_addr and local_unnamed_addr for all sanitized
globals.
Also in general unnamed_addr is not valid here as address now is important for
ODR violation detector and redzone poisoning.
Before the patch ICF on globals caused:
1. false ODR reports when we register global on the same address more than once
2. globals buffer overflow if we fold variables of smaller type inside of large
type. Then the smaller one will poison redzone which overlaps with the larger one.
Reviewers: eugenis, pcc
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D55857
llvm-svn: 349706
Creating the IR builder, then modifying the CFG, leads to an IRBuilder
where the BB and insertion point are inconsistent, so new instructions
have the wrong parent.
Modified an existing test because the test wasn't covering anything
useful (the "invoke" was not actually an invoke by the time we hit the
code in question).
Differential Revision: https://reviews.llvm.org/D55729
llvm-svn: 349693
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The test case has a couple of cases that are not simplified yet. In
particular, we're only looking at uses of instructions right now. I think
it would make sense to also extend this to arguments. Furthermore
DemandedBits doesn't yet know some of the tricks that InstCombine does
for the demanded bits or bitwise or/and/xor in combination with known
bits information.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 349674
This is to address post-commit feedback from Paul Robinson on r348954.
The original commit misinterprets count and upper bound as the same thing (I thought I saw GCC producing an upper bound the same as Clang's count, but GCC correctly produces an upper bound that's one less than the count (in C, that is, where arrays are zero indexed)).
I want to preserve the C-like output for the common case, so in the absence of a lower bound the count (or one greater than the upper bound) is rendered between []. In the trickier cases, where a lower bound is specified, a half-open range is used (eg: lower bound 1, count 2 would be "[1, 3)" and an unknown parts use a '?' (eg: "[1, ?)" or "[?, 7)" or "[?, ? + 3)").
Reviewers: aprantl, probinson, JDevlieghere
Differential Revision: https://reviews.llvm.org/D55721
llvm-svn: 349670
Summary:
The LTO/ThinLTO driver currently creates invalid bitcode by setting
symbols marked dllimport as dso_local. The compiler often has access
to the definition (often dllexport) and the declaration (often
dllimport) of an object at link-time, leading to a conflicting
declaration. This patch resolves the inconsistency by removing the
dllimport attribute.
Reviewers: tejohnson, pcc, rnk, echristo
Reviewed By: rnk
Subscribers: dmikulin, wristow, mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55627
llvm-svn: 349667
This adds a G_FCEIL generic instruction and uses it in AArch64. This adds
selection for floating point ceil where it has a supported, dedicated
instruction. Other cases aren't handled here.
It updates the relevant gisel tests and adds a select-ceil test. It also adds a
check to arm64-vcvt.ll which ensures that we don't fall back when we run into
one of the relevant cases.
llvm-svn: 349664
The (cmp (and X, Y) 0) pattern is greedy and ends up forming a TESTrr and consuming the and when it might be better to use one of the BMI/TBM like BLSR or BLSI.
This patch moves removes the pattern from isel and adds a post processing check to combine TESTrr+ANDrr into just a TESTrr. With this patch we are able to select the BMI/TBM instructions, but we'll also emit a TESTrr when the result is compared to 0. In many cases the peephole pass will be able to use optimizeCompareInstr to remove the TEST, but its probably not perfect.
Differential Revision: https://reviews.llvm.org/D55870
llvm-svn: 349661
Fixes https://bugs.llvm.org/show_bug.cgi?id=38743
The function removeRedundantBlockingStores is supposed to remove any blocking stores contained in each other in lockingStoresDispSizeMap.
But it currently looks only at the previous one, which will miss some cases that result in assert.
This patch refine the function to check all previous layouts until find the uncontained one. So all redundant stores will be removed.
Patch by Pengfei Wang
Differential Revision: https://reviews.llvm.org/D55642
llvm-svn: 349660
Summary:
Import libraries as created by llvm-dlltool always use the same archive
member name for every object file (namely, the DLL library name). Ensure
that long names are not repeatedly stored in the string table.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D55860
llvm-svn: 349637
Now that we use the generic ISD opcodes, we can use the generic intrinsics directly as well. This fixes the poor fast-isel codegen by not expanding to an easily broken IR code sequence.
I'm intending to deal with the signed saturation equivalents as well.
Clang counterpart: https://reviews.llvm.org/D55879
Differential Revision: https://reviews.llvm.org/D55855
llvm-svn: 349630
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts is simplifying vector elements, we're seeing more constant BUILD_VECTOR containing undefs.
This patch provides opt-in support for UNDEF elements in matchBinaryPredicate, passing NULL instead of the result ConstantSDNode* argument.
I've updated the (or (and X, c1), c2) -> (and (or X, c2), c1|c2) fold to demonstrate its use, which I believe is safe for undef cases.
Differential Revision: https://reviews.llvm.org/D55822
llvm-svn: 349629
As described on PR40091, we have several places where zext (and zext_vector_inreg) fold an undef input into an undef output. For zero extensions this is incorrect as the output should guarantee to least have the new upper bits set to zero.
SimplifyDemandedVectorElts is the worst offender (and its the most likely to cause new undefs to appear) but DAGCombiner's tryToFoldExtendOfConstant has a similar issue.
Thanks to @dmgreen for catching this.
Differential Revision: https://reviews.llvm.org/D55883
llvm-svn: 349625
These are due to be upgraded soon, but good to replace them with generic llvm sadd_sat/ssub_sat intrinsics now.
The avx512 masked cases need doing as well but require a bit of tidyup first.
llvm-svn: 349621
Summary:
Using HI here makes no logical sense, since the dword is only
32 bits to begin with.
Current Mesa master does not look at the relocation type at all,
so this change is fine. Future Mesa will rely on this, however.
Change-Id: I91085707834c4ac0370926602b93c94b90e44cb1
Reviewers: arsenm, rampitec, mareko
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D55369
llvm-svn: 349620
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts are simplifying vector elements, we're seeing more constant BUILD_VECTOR containing UNDEFs.
This patch provides opt-in handling of UNDEF elements in matchUnaryPredicate, passing NULL instead of the ConstantSDNode* argument.
I've updated SelectionDAG::simplifyShift to demonstrate its use.
Differential Revision: https://reviews.llvm.org/D55819
llvm-svn: 349616
These are already being autoupgraded, currently to an IR sequence, but best to replace them with generic llvm uadd_sat/usub_sat intrinsics (which D55855 will be doing shortly anyhow).
The avx512 masked cases need doing as well but require a bit of tidyup first.
llvm-svn: 349615
Summary:
Fix an issue where VGPR/SGPR bounds are not properly extended when brackets are merged.
This manifests as missing waitcnt insertions when multiple brackets are forwarded to a successor block and the first forward has lower VGPR/SGPR bounds.
Irreducible loop test has been extended based on a CTS failure detected for GFX9.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D55602
llvm-svn: 349611
All we have to do is mark it as legal.
This allows us to select a lot of new patterns handled by TableGen. This
patch adds tests for them and splits up the existing test file for
binary operators into 2 files, one for arithmetic ops and one for
logical ones.
llvm-svn: 349610
This is an initial implementation of no-op passthrough copying of COFF
with objcopy.
Differential Revision: https://reviews.llvm.org/D54939
llvm-svn: 349605
Summary:
In addition to reducing the functions in an LLVM module, bugpoint now
reduces the function attributes associated with each of the remaining
functions.
To test this, add a -bugpoint-crashfuncattr test pass, which crashes if
a function in the module has a "bugpoint-crash" attribute. A test case
demonstrates that the IR is reduced to just that one attribute.
Reviewers: MatzeB, silvas, davide, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D55216
llvm-svn: 349601
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
There's a mismatch internally about how we are handling these patterns.
We count loads as cheapToScalarize(), but then we don't actually
scalarize them, so that can leave extra instructions compared to where
we started when scalarizing other ops. If it's cheapToScalarize, then
we should be scalarizing.
llvm-svn: 349560
Clang uses weak linkage for objc runtime functions when they are not available on the platform.
The intrinsic has this linkage so we just need to pass that on to the runtime call.
llvm-svn: 349559
Simon Pilgrim