CorrectExtraCFGEdges function.
The latter was a workaround for "Various pieces of code" leaving bogus
extra CFG edges in place. Where by "various" it meant only
IfConverter::MergeBlocks, which failed to clear all of the successors
of dead blocks it emptied out. This wouldn't matter a whole lot,
except that the dead blocks remained listed as predecessors of
still-useful blocks, inhibiting optimizations.
This fix slightly changed two thumb tests, because the correct CFG
successors allowed for the "diamond" if-conversion pattern to be
detected, when it could only use "simple" before.
Additionally, the removal of a now-redundant call to analyzeBranch
(with AllowModify=true) in BranchFolder::OptimizeFunction caused a
later check for an empty block in BranchFolder::OptimizeBlock to
fail. Correct this by moving the call to analyzeBranch in
OptimizeBlock higher.
Differential Revision: https://reviews.llvm.org/D79527
This skips some tests that pass with active replay (which doesn't check
the output) but fail with passive replay. Valid reasons for this
include:
- Checking the output of the process (which doesn't run during replay),
- Checking files that cannot be captured in the VFS (non-existing or
unreadable files or files that are removed during test),
Unfortunately there's no good way to mark a test as supported for active
replay but unsupported for passive replay because the number and order
of API calls needs to be identical during capture and replay. I don't
think this is a huge loss however.
In a recent patch we introduced a problem with abstract attributes that
were assumed dead at some point. Since `Attributor::updateAA` was
introduced in 95e0d28b71, we did not
remember the dependence on the liveness AA when an abstract attribute
was assumed dead and therefore not updated.
Explicit reproducer added in liveness.ll.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 509242 (345483/s)
temporary memory allocations: 98666 (66937/s)
peak heap memory consumption: 18.60MB
peak RSS (including heaptrack overhead): 103.29MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 529332 (355494/s)
temporary memory allocations: 102107 (68574/s)
peak heap memory consumption: 19.40MB
peak RSS (including heaptrack overhead): 102.79MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: 20090 (1339333/s)
temporary memory allocations: 3441 (229400/s)
peak heap memory consumption: 801.45KB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Once we hit AT_NULL, we need to bail out of the loop; not just the
enclosing switch. This fixes basic usage (e.g. `cc --version`) when
AT_EXECPATH isn't present on older branches (e.g. under
emu-user-static, at the moment), where we would previously run off
the end of ::environ.
Patch By: kevans
Reviewed By: arichardson
Differential Revision: https://reviews.llvm.org/D79239
Summary:
https://bugs.llvm.org/show_bug.cgi?id=45639
clang-format incorrectly splits the `[[` in a long argument list
```
void SomeLongClassName::ALongMethodNameInThatClass([[maybe_unused]] const shared_ptr<ALongTypeName>& argumentNameForThat
LongType) {
}
```
becomes
```
void SomeLongClassName::ALongMethodNameInThatClass([
[maybe_unused]] const shared_ptr<ALongTypeName> &argumentNameForThatLongType) {
}
```
leaving one `[` on the previous line
For a function with just 1 very long argument, clang-format chooses to split between the `[[`,
This revision prevents the slip between the two `[` and the second `[`
Reviewed By: krasimir
Subscribers: cfe-commits
Tags: #clang, #clang-format
Differential Revision: https://reviews.llvm.org/D79401
Summary:
Update the check for the default exit block to not only check that the
terminator is not unreachable, but also check that unreachable block has
*only* the unreachable instruction.
Reviewers: chandlerc
Subscribers: hiraditya, uabelho, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78277
I discovered that when using an aux-target builtin, it was recognized as
a builtin but never checked. This patch checks for an aux-target builtin
and instead validates it against the correct target.
It does this by extracting the checking code for Target-specific
builtins into its own function, then calls with either targetInfo or
AuxTargetInfo.
Summary:
MemTag does not have any runtime at the moment, it's strictly code
instrumentation.
Reviewers: pcc
Subscribers: cryptoad, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D79522
Summary:
This patch fix the following issues with visitExtractElementInst:
1. Restrict VectorUtils::findScalarElement to fixed-length vector.
For scalable type, the number of elements in shuffle mask is
unknown at compile-time.
2. Fix out-of-range calculation for fixed-length vector.
3. Skip scalable type when analysis rely on fixed number of elements.
4. Add unit tests to check functionality of extractelement for scalable type.
Reviewers: sdesmalen, efriedma, spatel, nikic
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78267
See PR45812 for motivation.
No explicit test since I couldn't figure out how to get the
current disk drive in lower case into a form in lit where I could
mkdir it and cd to it. But the change does have test coverage in
that I can remove the case normalization in lit, and tests failed
on several bots (and for me locally if in a pwd with a lower-case
drive) without that normalization prior to this change.
Differential Revision: https://reviews.llvm.org/D79531
I discovered that the limit on possible builtins managed by this
ObjCOrBuiltin variable is too low when combining large targets, since
aux-targets are appended to the targets list. A runtime assert exists
for this, however this patch creates a static-assert as well.
The logic for said static-assert is to make sure we have the room for
the aux-target and target to both be the largest list, which makes sure
we have room for all possible combinations.
I also incremented the number of bits by 1, since I discovered this
currently broken. The current bit-count was 36, so this doesn't
increase any size.
Summary:
This patch fixes the following issues in visitInsertElementInst:
1. Bail out for scalable type when analysis requires fixed size number of vector elements.
2. Use cast<FixedVectorType> to get vector number of elements. This ensure assertion
on scalable vector type.
3. For scalable type, avoid folding a chain of insertelement into splat:
insertelt(insertelt(insertelt(insertelt X, %k, 0), %k, 1), %k, 2) ...
->
shufflevector(insertelt(X, %k, 0), undef, zero)
The length of scalable vector is unknown at compile-time, therefore we don't know if
given insertelement sequence is valid for splat.
Reviewers: sdesmalen, efriedma, spatel, nikic
Reviewed By: sdesmalen, efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78895
This is a wrapper around vector of NamedAttributes that keeps track of whether sorted and does some minimal effort to remain sorted (doing more, e.g., appending attributes in sorted order, could be done in follow up). It contains whether sorted and if a DictionaryAttr is queried, it caches the returned DictionaryAttr along with whether sorted.
Change MutableDictionaryAttr to always return a non-null Attribute even when empty (reserve null cases for errors). To this end change the getter to take a context as input so that the empty DictionaryAttr could be queried. Also create one instance of the empty dictionary attribute that could be reused without needing to lock context etc.
Update infer type op interface to use DictionaryAttr and use NamedAttrList to avoid incurring multiple conversion costs.
Fix bug in sorting helper function.
Differential Revision: https://reviews.llvm.org/D79463
These were testing byval private kernel arguments, which doesn't make
any sense and has never been used. There didn't seem to be any tests
for real value struct arguments, which are.
The original patch (rG86dfbc676ebe) exposed an existing bug:
we could wrongly cast a constant expression to BinaryOperator
because the pattern matching allows that. This adds a check
for that case, and there's a reduced test case to verify no
crashing.
Original commit message:
This builds on the or-reduction bailout that was added with D67841.
We still do not have IR-level load combining, although that could
be a target-specific enhancement for -vector-combiner.
The heuristic is narrowly defined to catch the motivating case from
PR39538:
https://bugs.llvm.org/show_bug.cgi?id=39538
...while preserving existing functionality.
That is, there's an unmodified test of pure load/zext/store that is
not seen in this patch at llvm/test/Transforms/SLPVectorizer/X86/cast.ll.
That's the reason for the logic difference to require the 'or'
instructions. The chances that vectorization would actually help a
memory-bound sequence like that seem small, but it looks nicer with:
vpmovzxwd (%rsi), %xmm0
vmovdqu %xmm0, (%rdi)
rather than:
movzwl (%rsi), %eax
movl %eax, (%rdi)
...
In the motivating test, we avoid creating a vector mess that is
unrecoverable in the backend, and SDAG forms the expected bswap
instructions after load combining:
movzbl (%rdi), %eax
vmovd %eax, %xmm0
movzbl 1(%rdi), %eax
vmovd %eax, %xmm1
movzbl 2(%rdi), %eax
vpinsrb $4, 4(%rdi), %xmm0, %xmm0
vpinsrb $8, 8(%rdi), %xmm0, %xmm0
vpinsrb $12, 12(%rdi), %xmm0, %xmm0
vmovd %eax, %xmm2
movzbl 3(%rdi), %eax
vpinsrb $1, 5(%rdi), %xmm1, %xmm1
vpinsrb $2, 9(%rdi), %xmm1, %xmm1
vpinsrb $3, 13(%rdi), %xmm1, %xmm1
vpslld $24, %xmm0, %xmm0
vpmovzxbd %xmm1, %xmm1 # xmm1 = xmm1[0],zero,zero,zero,xmm1[1],zero,zero,zero,xmm1[2],zero,zero,zero,xmm1[3],zero,zero,zero
vpslld $16, %xmm1, %xmm1
vpor %xmm0, %xmm1, %xmm0
vpinsrb $1, 6(%rdi), %xmm2, %xmm1
vmovd %eax, %xmm2
vpinsrb $2, 10(%rdi), %xmm1, %xmm1
vpinsrb $3, 14(%rdi), %xmm1, %xmm1
vpinsrb $1, 7(%rdi), %xmm2, %xmm2
vpinsrb $2, 11(%rdi), %xmm2, %xmm2
vpmovzxbd %xmm1, %xmm1 # xmm1 = xmm1[0],zero,zero,zero,xmm1[1],zero,zero,zero,xmm1[2],zero,zero,zero,xmm1[3],zero,zero,zero
vpinsrb $3, 15(%rdi), %xmm2, %xmm2
vpslld $8, %xmm1, %xmm1
vpmovzxbd %xmm2, %xmm2 # xmm2 = xmm2[0],zero,zero,zero,xmm2[1],zero,zero,zero,xmm2[2],zero,zero,zero,xmm2[3],zero,zero,zero
vpor %xmm2, %xmm1, %xmm1
vpor %xmm1, %xmm0, %xmm0
vmovdqu %xmm0, (%rsi)
movl (%rdi), %eax
movl 4(%rdi), %ecx
movl 8(%rdi), %edx
movbel %eax, (%rsi)
movbel %ecx, 4(%rsi)
movl 12(%rdi), %ecx
movbel %edx, 8(%rsi)
movbel %ecx, 12(%rsi)
Differential Revision: https://reviews.llvm.org/D78997
Summary:
This helps detect some missed BFI updates during CodeGenPrepare.
This is debug build only and disabled behind a flag.
Fix a missed update in CodeGenPrepare::dupRetToEnableTailCallOpts().
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77417
Summary:
These warnings were present when building llvm-libc in release mode.
```
workspace/llvm-project/libc/utils/benchmarks/LibcMemoryBenchmarkTest.cpp:50:34: warning: 'None' is deprecated: Use Align() or Align(1) instead [-Wdeprecated-declarations]
Conf.AddressAlignment = Align::None();
workspace/llvm-project/libc/utils/testutils/FDReaderUnix.cpp:19:7: warning: unused variable 'err' [-Wunused-variable]
int err = ::pipe(pipefd);
```
For test-utils it seems in general we should use `report_fatal_error` instead of asserts as these are turned off when building in release mode.
https://llvm.org/docs/CodingStandards.html#assert-liberally
Reviewers: abrachet, sivachandra
Reviewed By: abrachet, sivachandra
Subscribers: tschuett, libc-commits
Tags: #libc-project
Differential Revision: https://reviews.llvm.org/D79469
Summary:
Python2 has been removed from cygwin, this means anyone running the dump_format_style.py in a cygwin shell could pick up python3 instead
In Python3 all strings are unicode as the file is opened in binary mode we need to encode the contents string or we'll face the following error
```
Traceback (most recent call last):
File "./dump_format_style.py", line 228, in <module>
output.write(contents)
TypeError: a bytes-like object is required, not 'str'
```
Reviewed By: krasimir
Subscribers: cfe-commits
Tags: #clang, #clang-format
Differential Revision: https://reviews.llvm.org/D79326
Summary:
I thought it would be simpler to understand on how the unique names would
look like when an example is present. So I added some examples.
I found 2 such places to add examples
-Common blocks
-Module scope global data
Reviewers: schweitz, kiranchandramohan, sscalpone, jeanPerier, jdoerfert, DavidTruby
Reviewed By: schweitz, jeanPerier
Subscribers: llvm-commits, flang-commits
Tags: #flang, #llvm
Differential Revision: https://reviews.llvm.org/D79442
For empty directories (except the first one) we've been adding a file
with the same name as the directory to the result VFS mapping.
Differential Revision: https://reviews.llvm.org/D79551
vulkan-runtime-wrappers does not need MLIRSPIRVSerialization,
which is used by the ConvertGpuLaunchFuncToVulkanLaunchFunc pass
under the hood.
Differential Revision: https://reviews.llvm.org/D79577
The ostream operator<< is currently broken for std::complex with
specified field widths.
This patch a partial revert of c3478eff7a (reviewed as D71214),
restoring the correct behavior.
Differential Revision: https://reviews.llvm.org/D78816
Summary:
Avoid relocating DW_AT_call_pc, e.g. when a call PC is equal to the
function's low_pc as is the case in the test:
```
__Z5func1v:
0000000100007f94 b __Z5func2v
```
rdar://62952440
Reviewers: friss, JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79536
clock_gettime is documented to be available when _POSIX_TIMERS is
defined. Add a check for this.
Differential Revision: https://reviews.llvm.org/D79305
All entry points into ProcessGDBRemote that connect to the debug server
should connect to the replay server instead during reproducer replay.
This patch adds the necessary logic for ConnectRemote, which is
accessible from the SB API. This fixes active replay for
TestRecognizeBreakpoint.py as described in D78588.
When peeling out the epilogue we need to ignore illegal phis coming from stages
greater than the producer stage. Otherwise we end up with circular phi
dependencies.
Differential Revision: https://reviews.llvm.org/D79581
These tests fail due to a couple of changes to `move_iterator` for C++20:
* `move_iterator<I>::operator++(int)` returns `void` in C++20 if `I` doesn't model `forward_iterator`.
* `move_iterator<I>::reference` is calculated in C++20, so `I` must actually have an `operator*() const`.
Differential Revision: https://reviews.llvm.org/D79343
Nico Weber