There were 2 problems here. First, these patterns were duplicated to
handle the inverted shift operands instead of using the commuted
PatFrags.
Second, the point of the zext folding patterns don't apply to the
non-0ing high subtargets. They should be skipped instead of inserting
the extension. The zeroing high code would be emitted when necessary
anyway. This was also emitting unnecessary zexts in cases where the
high bits were undefined.
llvm-svn: 374092
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
Factor out CodeExtractor's analysis of allocas (for shrinkwrapping
purposes), and allow the analysis to be reused.
This resolves a quadratic compile-time bug observed when compiling
AMDGPUDisassembler.cpp.o.
Pre-patch (Release + LTO clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
176.5278 ( 57.8%) 0.4915 ( 18.5%) 177.0192 ( 57.4%) 177.4112 ( 57.3%) Hot Cold Splitting
```
Post-patch (ReleaseAsserts clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
1.4051 ( 3.3%) 0.0079 ( 0.3%) 1.4129 ( 3.2%) 1.4129 ( 3.2%) Hot Cold Splitting
```
Testing: check-llvm, and comparing the AMDGPUDisassembler.cpp.o binary
pre- vs. post-patch.
An alternate approach is to hide CodeExtractorAnalysisCache from clients
of CodeExtractor, and to recompute the analysis from scratch inside of
CodeExtractor::extractCodeRegion(). This eliminates some redundant work
in the shrinkwrapping legality check. However, some clients continue to
exhibit O(n^2) compile time behavior as computing the analysis is O(n).
rdar://55912966
Differential Revision: https://reviews.llvm.org/D68616
llvm-svn: 374089
Summary:
Without offsets on the MachineMemOperands (MMOs),
MachineInstr::mayAlias() will return true for all reads and writes to the
same resource descriptor. This leads to O(N^2) complexity in the MachineScheduler
when analyzing dependencies of buffer loads and stores. It also limits
the SILoadStoreOptimizer from merging more instructions.
This patch reduces the compile time of one pathological compute shader
from 12 seconds to 1 second.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65097
llvm-svn: 374087
D65402 causes test failure related to attributor-max-iterations.
This commit removes attributor-max-iterations-verify for now.
I'll examine the factor and the flag should be reverted.
llvm-svn: 374086
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 374085
Inhibit generation of unused real dpp instructions on gfx10 just
like it is done on other subtargets. This does not change anything
because these are illegal anyway and not accepted, but it does
reduce the number of instruction definitions generated.
Differential Revision: https://reviews.llvm.org/D68607
llvm-svn: 374083
Sometimes functions with large comment blocks in front of them have their
declarations output on several lines by c-index-test. Hence the one-line
function name/line/mangled pattern will not work to detect them. Break the
pattern up into two patterns and keep state after seeing the name/line
information until we finally see the mangled name.
Differential Revision: https://reviews.llvm.org/D68272
llvm-svn: 374078
If the sign bit of the value that is being sign-extended is not set,
i.e. the value is non-negative (s>= 0), then zero-extension will suffice,
and is better for analysis: https://rise4fun.com/Alive/a8PD
llvm-svn: 374075
Summary:
When searching for local expression tree created by stackified
registers, for 'block' placement, we start the search from the previous
instruction of a BB's terminator. But in 'try''s case, we should start
from the previous instruction of a call that can throw, or a EH_LABEL
that precedes the call, because the return values of the call's previous
instructions can be stackified and consumed by the throwing call.
For example,
```
i32.call @foo
call @bar ; may throw
br $label0
```
In this case, if we start the search from the previous instruction of
the terminator (`br` here), we end up stopping at `call @bar` and place
a 'try' between `i32.call @foo` and `call @bar`, because `call @bar`
does not have a return value so it is not a local expression tree of
`br`.
But in this case, unlike when placing 'block's, we should start the
search from `call @bar`, because the return value of `i32.call @foo` is
stackified and used by `call @bar`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68619
llvm-svn: 374073
During the If-Converter optimization pay attention when copying or
deleting call instructions in order to keep call site information in
valid state.
Reviewers: aprantl, vsk, efriedma
Reviewed By: vsk, efriedma
Differential Revision: https://reviews.llvm.org/D66955
llvm-svn: 374068
Summary:
In D65186 and related patches, MustBeExecutedContextExplorer is introduced. This enables us to traverse instructions guaranteed to execute from function entry. If we can know the argument is used as `dereferenceable` or `nonnull` in these instructions, we can mark `dereferenceable` or `nonnull` in the argument definition:
1. Memory instruction (similar to D64258)
Trace memory instruction pointer operand. Currently, only inbounds GEPs are traced.
```
define i64* @f(i64* %a) {
entry:
%add.ptr = getelementptr inbounds i64, i64* %a, i64 1
; (because of inbounds GEP we can know that %a is at least dereferenceable(16))
store i64 1, i64* %add.ptr, align 8
ret i64* %add.ptr ; dereferenceable 8 (because above instruction stores into it)
}
```
2. Propagation from callsite (similar to D27855)
If `deref` or `nonnull` are known in call site parameter attributes we can also say that argument also that attribute.
```
declare void @use3(i8* %x, i8* %y, i8* %z);
declare void @use3nonnull(i8* nonnull %x, i8* nonnull %y, i8* nonnull %z);
define void @parent1(i8* %a, i8* %b, i8* %c) {
call void @use3nonnull(i8* %b, i8* %c, i8* %a)
; Above instruction is always executed so we can say that@parent1(i8* nonnnull %a, i8* nonnull %b, i8* nonnull %c)
call void @use3(i8* %c, i8* %a, i8* %b)
ret void
}
```
Reviewers: jdoerfert, sstefan1, spatel, reames
Reviewed By: jdoerfert
Subscribers: xbolva00, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65402
llvm-svn: 374063
Summary: This patch introduces a generic way to compose two structured deductions. This will be used for composing generic deduction with `MustBeExecutedExplorer` and other existing generic deduction.
Reviewers: jdoerfert, sstefan1
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66645
llvm-svn: 374060
Summary:
This format introduces new features and platforms
The motivation for this format is to support more than 1 platform since previous versions only supported additional architectures and 1 platform,
for example ios + ios-simulator and macCatalyst.
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: mgorny, hiraditya, mgrang, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67529
llvm-svn: 374058
When -pg option is present than a call to _mcount is inserted into every
function. However since the proper ABI was not followed then the generated
gmon.out did not give proper results. By inserting needed instructions
before every _mcount we can fix this.
Differential Revision: https://reviews.llvm.org/D68390
llvm-svn: 374055
Summary:
This adds a `-max-configs-per-opcode` option to limit the number of
configs per opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68642
llvm-svn: 374054
Summary:
This patch adds the definitions of the constants and structures
necessary to interpret the MemoryInfoList minidump stream, as well as
the object::MinidumpFile interface to access the stream.
While the code is fairly simple, there is one important deviation from
the other minidump streams, which is worth calling out explicitly.
Unlike other "List" streams, the size of the records inside
MemoryInfoList stream is not known statically. Instead it is described
in the stream header. This makes it impossible to return
ArrayRef<MemoryInfo> from the accessor method, as it is done with other
streams. Instead, I create an iterator class, which can be parameterized
by the runtime size of the structure, and return
iterator_range<iterator> instead.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: JosephTremoulet, zturner, markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68210
llvm-svn: 374051
it just happened to break the bot right when I did my push. So I'm undoing
this mornings incorrect push. I've also kicked off an email to hopefully
get the bot fixed the correct way.
llvm-svn: 374049
Tim Northover remarked that the added patterns for fmls fp16
produce wrong code in case the fsub instruction has a
multiplication as its first operand, i.e., all the patterns FMLSv*_OP1:
> define <8 x half> @test_FMLSv8f16_OP1(<8 x half> %a, <8 x half> %b, <8 x half> %c) {
> ; CHECK-LABEL: test_FMLSv8f16_OP1:
> ; CHECK: fmls {{v[0-9]+}}.8h, {{v[0-9]+}}.8h, {{v[0-9]+}}.8h
> entry:
>
> %mul = fmul fast <8 x half> %c, %b
> %sub = fsub fast <8 x half> %mul, %a
> ret <8 x half> %sub
> }
>
> This doesn't look right to me. The exact instruction produced is "fmls
> v0.8h, v2.8h, v1.8h", which I think calculates "v0 - v2*v1", but the
> IR is calculating "v2*v1-v0". The equivalent <4 x float> code also
> doesn't emit an fmls.
This patch generates an fmla and negates the value of the operand2 of the fsub.
Inspecting the pattern match, I found that there was another mistake in the
opcode to be selected: matching FMULv4*16 should generate FMLSv4*16
and not FMLSv2*32.
Tested on aarch64-linux with make check-all.
Differential Revision: https://reviews.llvm.org/D67990
llvm-svn: 374044
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Summary:
When getValueInMiddleOfBlock happens to be called for a basic block
that has no incoming value at all, an IMPLICIT_DEF is inserted in that
block via GetValueAtEndOfBlockInternal. This IMPLICIT_DEF must be at
the top of its basic block or it will likely not reach the use that
the caller intends to insert.
Issue: https://github.com/GPUOpen-Drivers/llpc/issues/204
Reviewers: arsenm, rampitec
Subscribers: jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68183
llvm-svn: 374040
Before this patch, loads and stores were only tracked by their corresponding
queues in the LSUnit from dispatch until execute stage. In practice we should be
more conservative and assume that memory opcodes leave their queues at
retirement stage.
Basically, loads should leave the load queue only when they have completed and
delivered their data. We conservatively assume that a load is completed when it
is retired. Stores should be tracked by the store queue from dispatch until
retirement. In practice, stores can only leave the store queue if their data can
be written to the data cache.
This is mostly a mechanical change. With this patch, the retire stage notifies
the LSUnit when a memory instruction is retired. That would triggers the release
of LDQ/STQ entries. The only visible change is in memory tests for the bdver2
model. That is because bdver2 is the only model that defines the load/store
queue size.
This patch partially addresses PR39830.
Differential Revision: https://reviews.llvm.org/D68266
llvm-svn: 374034
Support for tracking registers that forward function parameters into the
following function frame. For now we only support cases when parameter
is forwarded through single register.
Reviewers: aprantl, vsk, t.p.northover
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D66953
llvm-svn: 374033
Summary:
Right now there are no snippet generators that emit the `Config` Field,
but I plan to add it to investigate LEA operands for PR32326.
What was broken was:
- `Config` Was not propagated up until the BenchmarkResult::Key.
- Clustering should really consider different configs as measuring
different things, so we should stabilize on (Opcode, Config) instead of
just Opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits, lebedev.ri
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68629
llvm-svn: 374031
Summary: LoopRotate is a loop pass and SE should always be available.
Reviewers: anemet, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D68573
llvm-svn: 374026
Based on the discussion in
http://lists.llvm.org/pipermail/llvm-dev/2019-October/135574.html, the
conclusion was reached that the ARM backend should produce vcmp instead
of vcmpe instructions by default, i.e. not be producing an Invalid
Operation exception when either arguments in a floating point compare
are quiet NaNs.
In the future, after constrained floating point intrinsics for floating
point compare have been introduced, vcmpe instructions probably should
be produced for those intrinsics - depending on the exact semantics
they'll be defined to have.
This patch logically consists of the following parts:
- Revert http://llvm.org/viewvc/llvm-project?rev=294945&view=rev and
http://llvm.org/viewvc/llvm-project?rev=294968&view=rev, which
implemented fine-tuning for when to produce vcmpe (i.e. not do it for
equality comparisons). The complexity introduced by those patches
isn't needed anymore if we just always produce vcmp instead. Maybe
these patches need to be reintroduced again once support is needed to
map potential LLVM-IR constrained floating point compare intrinsics to
the ARM instruction set.
- Simply select vcmp, instead of vcmpe, see simple changes in
lib/Target/ARM/ARMInstrVFP.td
- Adapt lots of tests that tested for vcmpe (instead of vcmp). For all
of these test, the intent of what is tested for isn't related to
whether the vcmp should produce an Invalid Operation exception or not.
Fixes PR43374.
Differential Revision: https://reviews.llvm.org/D68463
llvm-svn: 374025
Several LLVM tools write text files/streams without using OF_Text.
This can cause problems on platforms which distinguish between
text and binary output. This PR adds the OF_Text flag for the
following tools:
- llvm-dis
- llvm-dwarfdump
- llvm-mca
- llvm-mc (assembler files only)
- opt (assembler files only)
- RemarkStreamer (used e.g. by opt)
Reviewers: rnk, vivekvpandya, Bigcheese, andreadb
Differential Revision: https://reviews.llvm.org/D67696
llvm-svn: 374024
Summary:
Implement support for hexadecimal escape sequences to match how GNU 'as'
handles them. I.e., read all hexadecimal characters and truncate to the
lower 16 bits.
Reviewers: nickdesaulniers, jcai19
Subscribers: llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68598
llvm-svn: 374018
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Lit has a "quiet" option, -q, which is documented to "suppress no
error output". Previously, LitConfig displayed notes and warnings when
the quiet option was specified. The result was that it was not
possible to get only pertinent file/line information to be used by an
editor to jump to the location where checks were failing without
passing a number of unhelpful locations first. Here, the
implementations of LitConfig.note and LitConfig.warning are modified
to account for the quiet flag and avoid displaying if the flag has
indeed been set.
Patch by Nate Chandler
Reviewed by yln
Differential Revision: https://reviews.llvm.org/D68044
llvm-svn: 374009
Yonghong Song