This change cause performance regression on MultiSource/Benchmarks/TSVC/Symbolics-flt/Symbolics-flt from LNT and some other bechmarks.
See https://reviews.llvm.org/D18777 for details.
llvm-svn: 279433
Currently nodes_iterator may dereference to a NodeType* or a NodeType&. Make them all dereference to NodeType*, which is NodeRef later.
Differential Revision: https://reviews.llvm.org/D23704
Differential Revision: https://reviews.llvm.org/D23705
llvm-svn: 279326
Repeated inserts into AliasSetTracker have quadratic behavior - inserting a
pointer into AST is linear, since it requires walking over all "may" alias
sets and running an alias check vs. every pointer in the set.
We can avoid this by tracking the total number of pointers in "may" sets,
and when that number exceeds a threshold, declare the tracker "saturated".
This lumps all pointers into a single "may" set that aliases every other
pointer.
(This is a stop-gap solution until we migrate to MemorySSA)
This fixes PR28832.
Differential Revision: https://reviews.llvm.org/D23432
llvm-svn: 279274
directly produce the index as the value type result.
This requires making the index movable which is straightforward. It
greatly simplifies things by allowing us to completely avoid the builder
API and the layers of abstraction inherent there. Instead both pass
managers can directly construct these when run by value. They still
won't be constructed truly eagerly thanks to the optional in the legacy
PM. The code that directly builds the index can also just share a direct
function.
A notable change here is that the result type of the analysis for the
new PM is no longer a reference type. This was really problematic when
making changes to how we handle result types to make our interface
requirements *much* more strict and precise. But I think this is an
overall improvement.
Differential Revision: https://reviews.llvm.org/D23701
llvm-svn: 279216
number of assume intrinsics.
The classical way to have a cache-friendly vector style container when
we need queue semantics for BFS instead of stack semantics for DFS is to
use an ever-growing vector and an index. Erasing from the front requires
O(size) work, and unless we expect the worklist to grow *very* large,
its probably cheaper to just grow and race down the list.
But that makes it more bad that we're putting the assume intrinsics in
this at all. We end up looking at the (by definition empty) use list to
see if they're ephemeral (when we've already put them in that set), etc.
Instead, directly populate the worklist with the operands when we mark
the assume intrinsics as ephemeral. Also, test the visited set *before*
putting things into the worklist so we don't accumulate the same value
in the list 100s of times.
It would be nice to use a set-vector for this but I think its useful to
test the set earlier to avoid repeatedly querying whether the same
instruction is safe to speculate.
Hopefully with these changes the number of values pushed onto the
worklist is smaller, and we avoid quadratic work by letting it grow as
necessary.
Differential Revision: https://reviews.llvm.org/D23396
llvm-svn: 279099
Summary:
This is part of the "NodeType* -> NodeRef" migration. Notice that since
GraphWriter prints object address as identity, I added a static_assert on
NodeRef to be a pointer type.
Reviewers: dblaikie
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D23580
llvm-svn: 278966
Refactored so that a LSRUse owns its fixups, as oppsed to letting the
LSRInstance own them. This makes it easier to rate formulas for
LSRUses, since the fixups are available directly. The Offsets vector
has been removed since it was no longer necessary.
New target hook isFoldableMemAccessOffset(), which is used during formula
rating.
For SystemZ, this is useful to express that loads and stores with
float or vector types with a big/negative offset should be avoided in
loops. Without this, LSR will generate a lot of negative offsets that
would require extra instructions for loading the address.
Updated tests:
test/CodeGen/SystemZ/loop-01.ll
Reviewed by: Quentin Colombet and Ulrich Weigand.
https://reviews.llvm.org/D19152
llvm-svn: 278927
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
When there's only one argument and it doesn't match one of the known
functions, return ARCInstKind::CallOrUser rather than falling through
to the two argument case. The old behaviour both incremented past and
dereferenced end().
llvm-svn: 278881
We are trying to prove that one group of operands is a subset of
another. We did this by populating two Sets and determining that every
element within one was inside the other.
However, this is unnecessary. We can simply construct a single set and
test if each operand is within it.
llvm-svn: 278641
Recursive calls to aliasCheck from alias[GEP|Select|PHI] may result in a second call to GetUnderlyingObject for a Value, whose underlying object is already computed. This patch ensures that in this situations, the underlying object is not computed again, and the result of the previous call is resued.
https://reviews.llvm.org/D22305
llvm-svn: 278519
Rewrite Visited[Cond] = getValueFromConditionImpl(..., Visited) statement which can lead to a memory corruption since getValueFromConditionImpl changes Visited map and invalidates the iterators.
llvm-svn: 278514
Summary:
Port the ModuleSummaryAnalysisWrapperPass to the new pass manager.
Use it in the ported BitcodeWriterPass (similar to how we use the
legacy ModuleSummaryAnalysisWrapperPass in the legacy WriteBitcodePass).
Also, pass the -module-summary opt flag through to the new pass
manager pipeline and through to the bitcode writer pass, and add
a test that uses it.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23439
llvm-svn: 278508
Take range metadata into account for conditions like this:
%length = load i32, i32* %length_ptr, !range !{i32 0, i32 2147483647}
%cmp = icmp ult i32 %a, %length
This is a common pattern for range checks where the length of the array is dynamically loaded.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23267
llvm-svn: 278496
Currently LVI can only gather value constraints from comparisons like:
* icmp <pred> Val, ...
* icmp ult (add Val, Offset), ...
In fact we can handle any predicate in latter comparisons.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23357
llvm-svn: 278493
This method had some duplicate code when we did or did not have a dom tree. Refactor
it to remove the duplication, but also clean up the control flow to have less duplication.
llvm-svn: 278450
There were 2 versions of this method. A public one which takes a
const Instruction* and a private implementation which takes a mutable
Value* and casts to an Instruction*.
There was no need for the 2 versions as all callers pass a const Instruction*
and there was no need for a mutable pointer as we only do analysis here.
llvm-svn: 278434
Summary:
This is an extension of the fix in r271424. That fix dealt with builder
insert points being moved by SCEV expansion, but only for the lifetime
of the expand call. This change modifies the interface so that LSR can
safely call expand multiple times at the same insert point and do the
right thing if one of the expansions decides to move the original insert
point.
This is a fix for PR28719.
Reviewers: sanjoy
Subscribers: llvm-commits, mcrosier, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23342
llvm-svn: 278413
Summary:
I think it is much better this way.
When I firstly saw line:
Cost += InlineConstants::LastCallToStaticBonus;
I though that this is a bug, because everywhere where the cost is being reduced
it is usuing -=.
Reviewers: eraman, tejohnson, mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23222
llvm-svn: 278290
Teach LVI how to gather information from conditions in the form of (cond1 && cond2). Our out-of-tree front-end emits range checks in this form.
Reviewed By: sanjoy
Differential Revision: http://reviews.llvm.org/D23200
llvm-svn: 278231
Instead of returning bool and setting LVILatticeValue reference argument return LVILattice value. Use overdefined value to denote the case when we didn't gather any information from the condition.
This change was separated from the review "[LVI] Handle conditions in the form of (cond1 && cond2)" (https://reviews.llvm.org/D23200#inline-199531). Once getValueFromCondition returns LVILatticeValue we can cache the result in Visited map.
llvm-svn: 278224
The problem was triggered by my recent change in CVP (D23059). Current code expected that integer constants are represented by constantrange LVILatticeVal and never represented as LVILatticeVal with constant tag. That is true for ConstantInt constants, although ConstantExpr integer type constants are legally represented as constant LVILatticeVal.
This code fails with CVP change in:
@b = global i32 0, align 4
define void @test6(i32 %a) {
bb:
%add = add i32 %a, ptrtoint (i32* @b to i32)
ret void
}
Currently getConstantRange code is not executed by any of the upstream passes. I'm going to add a test case to test/Transforms/CorrelatedValuePropagation/add.ll once I resubmit the CVP change.
Reviewed By: sanjoy
Differential Revision: http://reviews.llvm.org/D23194
llvm-svn: 278217
This adds an InlineParams struct which is populated from the command line options by getInlineParams and passed to getInlineCost for the call analyzer to use.
Differential revision: https://reviews.llvm.org/D22120
llvm-svn: 278189
Summary:
The inliner not being a function pass requires the work-around of
generating the OptimizationRemarkEmitter and in turn BFI on demand.
This will go away after the new PM is ready.
BFI is only computed inside ORE if the user has requested hotness
information for optimization diagnostitics (-pass-remark-with-hotness at
the 'opt' level). Thus there is no additional overhead without the
flag.
Reviewers: hfinkel, davidxl, eraman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22694
llvm-svn: 278185
The patch is to fix the bug in PR28705. It was caused by setting wrong return
value for SCEVExpander::findExistingExpansion. The return values of findExistingExpansion
have different meanings when the function is used in different ways so it is easy to make
mistake. The fix creates two new interfaces to replace SCEVExpander::findExistingExpansion,
and specifies where each interface is expected to be used.
Differential Revision: https://reviews.llvm.org/D22942
llvm-svn: 278161
The fix for PR28705 will be committed consecutively.
In D12090, the ExprValueMap was added to reuse existing value during SCEV expansion.
However, const folding and sext/zext distribution can make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to expand S3 as
V1 - C_a + C_b instead of expanding S2 literally. It is helpful when S2 is a
complex SCEV expr and S2 has no entry in ExprValueMap, which is usually caused
by the fact that S3 is generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV to
ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a} into the
ExprValueMap when we create SCEV for V1. When S3 is expanded, it will first
expand S2 to V1 - C_a because of S2->{V1, C_a} in the map, then expand S3 to
V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
llvm-svn: 278160
Summary:
We teach alias analysis that invariant.start is readonly.
This helps with GVN and memcopy optimizations that currently treat.
invariant.start as a clobber.
We need to treat this as readonly, so that DSE does not incorrectly
remove stores prior to the invariant.start
Reviewers: sanjoy, reames, majnemer, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23214
llvm-svn: 278138
One exception here is LoopInfo which must forward-declare it (because
the typedef is in LoopPassManager.h which depends on LoopInfo).
Also, some includes for LoopPassManager.h were needed since that file
provides the typedef.
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278079
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278078
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278077
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Gathering constantins from a condition on the false path ask makeAllowedICmpRegion about inverse predicate instead of inversing the resulting range.
This change was separated from the review "[LVI] Make LVI smarter about comparisons with non-constants" (https://reviews.llvm.org/D23205#inline-198361)
llvm-svn: 278009
Summary:
The correctness fix here is that when we CSE a load with another load,
we need to combine the metadata on the two loads. This matches the
behavior of other passes, like instcombine and GVN.
There's also a minor optimization improvement here: for load PRE, the
aliasing metadata on the inserted load should be the same as the
metadata on the original load. Not sure why the old code was throwing
it away.
Issue found by inspection.
Differential Revision: http://reviews.llvm.org/D21460
llvm-svn: 277977
Summary: Hot callsites should have higher threshold than inline hints. This patch uses separate threshold parameter for hot callsites.
Reviewers: davidxl, eraman
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D22368
llvm-svn: 277860
Shifts with a uniform but non-constant count were considered very expensive to
vectorize, because the splat of the uniform count and the shift would tend to
appear in different blocks. That made the splat invisible to ISel, and we'd
scalarize the shift at codegen time.
Since r201655, CodeGenPrepare sinks those splats to be next to their use, and we
are able to select the appropriate vector shifts. This updates the cost model to
to take this into account by making shifts by a uniform cheap again.
Differential Revision: https://reviews.llvm.org/D23049
llvm-svn: 277782
I'm removing a misplaced pair of more specific folds from InstCombine in this patch as well,
so we know where those folds are happening in InstSimplify.
llvm-svn: 277738
Summary:
TargetBaseAlign is no longer required since LSV checks if target allows misaligned accesses.
A constant defining a base alignment is still needed for stack accesses where alignment can be adjusted.
Previous patch (D22936) was reverted because tests were failing. This patch also fixes the cause of those failures:
- x86 failing tests either did not have the right target, or the right alignment.
- NVPTX failing tests did not have the right alignment.
- AMDGPU failing test (merge-stores) should allow vectorization with the given alignment but the target info
considers <3xi32> a non-standard type and gives up early. This patch removes the condition and only checks
for a maximum size allowed and relies on the next condition checking for %4 for correctness.
This should be revisited to include 3xi32 as a MVT type (on arsenm's non-immediate todo list).
Note that checking the sizeInBits for a MVT is undefined (leads to an assertion failure),
so we need to create an EVT, hence the interface change in allowsMisaligned to include the Context.
Reviewers: arsenm, jlebar, tstellarAMD
Subscribers: jholewinski, arsenm, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23068
llvm-svn: 277735
This reverts commit r277611 and the followup r277614.
Bootstrap builds and chromium builds are crashing during inlining after
this change.
llvm-svn: 277642
We were able to figure out that the result of a call is some constant.
While propagating that fact, we added the constant to the value map.
This is problematic because it results in us losing the call site when
processing the value map.
This fixes PR28802.
llvm-svn: 277611
There were issues with simply reporting AttrUnknown on
previously-unknown values in CFLAnders. So, we now act *entirely*
conservatively for values we haven't seen before. As in the prior patch
(r277362), writing a lit test for this isn't exactly trivial. If someone
wants a test badly, I'm willing to try to write one.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D23077
llvm-svn: 277533
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277411
Summary: By generalize the interface, users are able to inject more flexible Node token into the algorithm, for example, a pair of vector<Node>* and index integer. Currently I only migrated SCCIterator to use NodeRef, but more is coming. It's a NFC.
Reviewers: dblaikie, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22937
llvm-svn: 277399
As it turns out, modref queries are broken with CFLAA. Specifically,
the data source we were using for determining modref behaviors
explicitly ignores operations on non-pointer values. So, it wouldn't
note e.g. storing an i32 to an i32* (or loading an i64 from an i64*).
It also ignores external function calls, rather than acting
conservatively for them.
(N.B. These operations, where necessary, *are* tracked by CFLAA; we just
use a different mechanism to do so. Said mechanism is relatively
imprecise, so it's unlikely that we can provide reasonably good modref
answers with it as implemented.)
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22978
llvm-svn: 277366
Currently, CFLAnders assumes that values it hasn't seen don't alias
anything. This patch fixes that. Given that the only way for this to
happen is to query AA, rely on specific transformations happening, then
query AA again (looking for a specific set of queries), lit testing is a
bit difficult. If someone really wants a test, I'm happy to add one.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22981
llvm-svn: 277362
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277313
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
llvm-svn: 277189
An undef vector element can be treated as if it had any value. Folding
such a vector element to 0 in a bitcast can open up further folding
opportunities.
llvm-svn: 277104
ConstantExpr::getWithOperands does much of the hard work that
ConstantFoldInstOperandsImpl tries to do but more completely.
This lets us fold ExtractValue/InsertValue expressions.
llvm-svn: 277100
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
This patch fixes an assertion that fires when we try to add non-pointer
Values to the CFLGraph. Centralizing the check for whether something
is/isn't a pointer type isn't completely trivial (and, in some cases,
would end up being entirely redundant), but it may be beneficial to do
so if this trips us up more in the future.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22947
llvm-svn: 277096
Summary:
The motivation is the same as in D22141: In order to add the hotness
attribute to optimization remarks we need BFI to be available in all
passes that emit optimization remarks. BFI depends on BPI so unless we
make this lazy as well we would still compute BPI unconditionally.
The solution is to use the new LazyBPI pass in LazyBFI and only compute
BPI when computation of BFI is requested by the client.
I extended the laziness test using a LoopDistribute test to also cover
BPI.
Reviewers: hfinkel, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22835
llvm-svn: 277083
When folding an expression, we run ConstantFoldConstantExpression on
each operand of that expression.
However, ConstantFoldConstantExpression can fail and retur nullptr.
Previously, we would bail on further refining the expression.
Instead, use the original operand and see if we can refine a later
operand.
llvm-svn: 276959
This patch lets CFLAnders respond to mod-ref queries. It also includes
a small bugfix to CFLSteens.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22823
llvm-svn: 276939
Summary:
This lets us avoid creating and destroying a CallbackVH every time we
check the cache.
This is good for a 2% e2e speedup when compiling one of the large Eigen
tests at -O3.
FTR, I tried making the ValueCache hashtable one-level -- i.e., mapping
a pair (Value*, BasicBlock*) to a lattice value, and that didn't seem to
provide any additional improvement. Saving a word in LVILatticeVal by
merging the Tag and Val fields also didn't yield a speedup.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21951
llvm-svn: 276926
This unblocks the new PM part of River's patch in
https://reviews.llvm.org/D22706
Conveniently, this same change was needed for D21921 and so these
changes are just spun out from there.
llvm-svn: 276515
While we handed loads past the end of an array, we didn't handle loads
_before_ the array.
This fixes PR28062.
N.B. While the bug in the code is obvious, I am struggling to craft a
test case which is reasonable in size.
llvm-svn: 276510
This change lets us prove things like
"{X,+,10} s< 5000" implies "{X+7,+,10} does not sign overflow"
It does this by replacing replacing getConstantDifference by
computeConstantDifference (which is smarter) in
isImpliedCondOperandsViaRanges.
llvm-svn: 276505
This patch teaches FunctionInfo about offsets.
Like the last patch, this one doesn't introduce any visible
functionality change (the core algorithm knows nothing about offsets;
they're just plumbed through). Tests will come when we start acting
differently because of the offsets.
Patch by Jia Chen.
(N.B. I made a tiny change to Jia's patch to avoid warnings by GCC: I
put DenseMapInfo specializations in the `llvm` namespace. Only realized
that those appeared when compiling locally. :) )
Differential Revision: https://reviews.llvm.org/D22634
llvm-svn: 276486
rL245171 exposed a hole in InstSimplify that manifested in a strange way in PR28466:
https://llvm.org/bugs/show_bug.cgi?id=28466
It's possible to use trunc + icmp sgt/slt in place of an and + icmp eq/ne, so we need to
recognize that pattern to eliminate selects that are choosing between some value and some
bitmasked version of that value.
Note that there is significant room for improvement (refactoring) and enhancement (more
patterns, possibly in InstCombine rather than here).
Differential Revision: https://reviews.llvm.org/D22537
llvm-svn: 276341
std::numeric_limits<int64_t>::max() is not constexpr in VC 2013 headers,
and Clang complains that it isn't. MSVC 2013 itself is emitting a
dynamic initializer for this thing. Instead, use an enum.
llvm-svn: 276334
Having the added `\brief` made doxygen interpret it as the summary for
the `llvm` namespace (visible at:
http://llvm.org/doxygen/namespaces.html).
llvm-svn: 276331
(Also, refactor our constexpr handling to be less insane).
This patch lets us track field offsets in the CFL Graph, which is the
first step to making CFLAA field/offset sensitive. Woohoo! Note that
this patch shouldn't visibly change our behavior (since we make no use
of the offsets we're now tracking), so we can't quite add tests for this
yet.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22598
llvm-svn: 276201
The earlier change added hotness attribute to missed-optimization
remarks. This follows up with the analysis remarks (the ones explaining
the reason for the missed optimization).
llvm-svn: 276192
This helps because LoopAccessReport is passed around as a const
reference and we derive the basic block passed as the Value parameter
from the instruction in LoopAccessReport.
llvm-svn: 276191
In D12090, the ExprValueMap was added to reuse existing value during SCEV expansion.
However, const folding and sext/zext distribution can make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to expand S3 as
V1 - C_a + C_b instead of expanding S2 literally. It is helpful when S2 is a
complex SCEV expr and S2 has no entry in ExprValueMap, which is usually caused
by the fact that S3 is generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV to
ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a} into the
ExprValueMap when we create SCEV for V1. When S3 is expanded, it will first
expand S2 to V1 - C_a because of S2->{V1, C_a} in the map, then expand S3 to
V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
llvm-svn: 276136
We just set PreserveLCSSA to always true since we don't have an
analogous method `mustPreserveAnalysisID(LCSSA)`.
Also port LoopInfo verifier pass to test LoopUnrollPass.
llvm-svn: 276063
This patch adds function summary support to CFLAnders. It also comes
with a lot of tests! Woohoo!
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22450
llvm-svn: 276026
This patch adds more specific edges to CFLAndersAliasAnalysis. The goal
of these edges is to give us more information about *how* two values
that MayAlias alias. With this, we can now tell cases like
a = b; // ergo, a may alias b
apart from
a = c;
b = c;
// so, a may alias b, but only because they were both assigned to c.
...And others.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22429
llvm-svn: 276023
D20859 and D20860 attempted to replace the SSE (V)CVTTPS2DQ and VCVTTPD2DQ truncating conversions with generic IR instead.
It turns out that the behaviour of these intrinsics is different enough from generic IR that this will cause problems, INF/NAN/out of range values are guaranteed to result in a 0x80000000 value - which plays havoc with constant folding which converts them to either zero or UNDEF. This is also an issue with the scalar implementations (which were already generic IR and what I was trying to match).
This patch changes both scalar and packed versions back to using x86-specific builtins.
It also deals with the other scalar conversion cases that are runtime rounding mode dependent and can have similar issues with constant folding.
A companion clang patch is at D22105
Differential Revision: https://reviews.llvm.org/D22106
llvm-svn: 275981
Summary:
The main goal is to able to start using the new OptRemarkEmitter
analysis from the LoopVectorizer. Since the vectorizer was recently
converted to the new PM, it makes sense to convert this analysis as
well.
This pass is currently tested through the LoopDistribution pass, so I am
also porting LoopDistribution to get coverage for this analysis with the
new PM.
Reviewers: davidxl, silvas
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22436
llvm-svn: 275810
Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
llvm-svn: 275707
This patch adds proper handling of stratified attributes into our
anders-style CFLAA implementation. It also comes bundled with more
CFLAnders tests. :)
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22325
llvm-svn: 275604
This adds an incomplete anders-style implementation for CFLAA. It's
incomplete in that it's missing interprocedural analysis, attrs
handling, etc. and that it needs more tests. More tests and features
will be added in future commits.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22291
llvm-svn: 275602
Summary:
This is the first set of changes implementing the RFC from
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
This is a cross-sectional patch; rather than implementing the hotness
attribute for all optimization remarks and all passes in a patch set, it
implements it for the 'missed-optimization' remark for Loop
Distribution. My goal is to shake out the design issues before scaling
it up to other types and passes.
Hotness is computed as an integer as the multiplication of the block
frequency with the function entry count. It's only printed in opt
currently since clang prints the diagnostic fields directly. E.g.:
remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300)
A new API added is similar to emitOptimizationRemarkMissed. The
difference is that it additionally takes a code region that the
diagnostic corresponds to. From this, hotness is computed using BFI.
The new API is exposed via an analysis pass so that it can be made
dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.)
This feature can all be enabled by setDiagnosticHotnessRequested in the
LLVM context. If this is off, LazyBFI is not calculated (D22141) so
there should be no overhead.
A new command-line option is added to turn this on in opt.
My plan is to switch all user of emitOptimizationRemark* to use this
module instead.
Reviewers: hfinkel
Subscribers: rcox2, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21771
llvm-svn: 275583
Calling getModRefInfo with a fence resulted in crashes because fences
don't have a memory location. Add a new predicate to Instruction
called isFenceLike which indicates that the instruction mutates memory
but not any single memory location in particular. In practice, it is a
proxy for the set of instructions which "mayWriteToMemory" but cannot be
used with MemoryLocation::get.
This fixes PR28570.
llvm-svn: 275581
Most possibly problem was caused by the same reason as PR28400. This change
bypasses it by using CallbackVH instead of AssertingVH.
Differential Revision: https://reviews.llvm.org/D20957
llvm-svn: 275563
Artur Pilipenko