This patch goes back to considering ForceAbsolute in moveAbsRight, but
only if the second argument is not already absolute.
With this we can handle "foo + ABSOLUTE(foo)" and "ABSOLUTE(foo) + foo".
llvm-svn: 313800
The idea of this function is to simplify the implementation of binary
operators like add.
A value might be absolute because of an ABSOLUTE expression, but it
still depends on the value of a section and we might not be able to
evaluate it early. We should keep such values on the LHS, so that we
can delay the evaluation.
We can now handle both "1 + ABSOLUTE(foo)" and "ABSOLUTE(foo) + 1".
llvm-svn: 313794
The previous logic was to try to detect if a linker script defined _gp
by checking !ElfSym::MipsGp->Value. That doesn't work in all cases as
the assigned value can be 0.
We now just always defined it Writer.cpp and always overwrite it
afterwards if needed.
llvm-svn: 313788
Normally to find the offset of a value in a section, we have to
compute the value since the alignment is defined on the final address.
If the alignment is trivial, we can skip the value computation. This
allows us to know the offset even in cases where we cannot yet know
the value.
llvm-svn: 313777
We try to evaluate expressions early when possible, but it is not
possible to evaluate them early if they are based on a section.
Before we would get this wrong on ABSOLUTE expressions.
llvm-svn: 313764
Sections are limited to 4 GiB. Error out early if a section exceeds this
size, rather than overflowing the section size and getting confusing
assertion failures/segfaults later.
Differential Revision: https://reviews.llvm.org/D38005
llvm-svn: 313699
Given a linker script that ends in
.some_sec { ...} ;
__stack_start = .;
. = . + 0x2000;
__stack_end = .;
lld would put orphan sections like .comment before __stack_end,
corrupting the intended meaning.
The reason we don't normally move orphans past assignments to . is to
avoid breaking
rx_sec : { *(rx_sec) }
. = ALIGN(0x1000);
/* The RW PT_LOAD starts here*/
but in this case, there is nothing after and it seems safer to put the
orphan section last. This seems to match bfd's behavior and is
convenient for writing linker scripts that care about the layout of
SHF_ALLOC sections, but not of any non SHF_ALLOC sections.
llvm-svn: 313646
This is PR34506.
Imagine we have 2 sections the same name but different COMDAT groups:
.section .foo,"axG",@progbits,bar,comdat
.section .foo,"axG",@progbits,zed,comdat
When linking relocatable we do not merge SHT_GROUP sections. But still would merge
both input sections .foo into single output section .foo.
As a result we will have 2 different SHT_GROUPs containing the same section, what
is wrong.
Patch fixes the issue, preventing merging SHF_GROUP sections with any others.
Differential revision: https://reviews.llvm.org/D37574
llvm-svn: 313621
We crashed when --emit-relocs was used
and relocated section was collected by GC.
Differential revision: https://reviews.llvm.org/D37561
llvm-svn: 313620
r303378 was submitted because r303374 (Merge IAT and ILT) made lld's
output incompatible with the Binding feature. Now that r303374 was
reverted, we do not need to keep this change.
Pointed out by pcc.
llvm-svn: 313414
This is a resubmission of r313270. It broke standalone builds of
compiler-rt because we were not correctly generating the llvm-lit
script in the standalone build directory.
The fixes incorporated here attempt to find llvm/utils/llvm-lit
from the source tree returned by llvm-config. If present, it
will generate llvm-lit into the output directory. Regardless,
the user can specify -DLLVM_EXTERNAL_LIT to point to a specific
lit.py on their file system. This supports the use case of
someone installing lit via a package manager. If it cannot find
a source tree, and -DLLVM_EXTERNAL_LIT is either unspecified or
invalid, then we print a warning that tests will not be able
to run.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313407
This fixes pr34301.
As the bug points out, we want to keep some relocations with undefined
weak symbols. This means that we cannot always claim that these
symbols are not preemptible as we do now.
Unfortunately, we cannot also just always claim that they are
preemptible. Doing so would, for example, cause us to try to create a
plt entry when we don't even have a dynamic symbol table.
What almost works is to say that weak undefined symbols are
preemptible if and only if we have a dynamic symbol table. Almost
because we don't want to fail the build trying to create a copy
relocation to a weak undefined.
llvm-svn: 313372
This patch is still breaking several multi-stage compiler-rt bots.
I already know what the fix is, but I want to get the bots green
for now and then try re-applying in the morning.
llvm-svn: 313335
_gp points to a position in the file, so it is not really absolute. It
is also simpler to not force it to be absolute, so if there is no
strong ABI requirement we should not do it.
llvm-svn: 313333
GNU ld manual says that multi-letter long option can be prefixed with
either -- or -. Therefore, we should accept not only --subsystem but
also -subsystem, for example.
There is one exception. If an option starts with "o", it should only be
prefixed with -- to avoid ambiguity with -o<filename> option.
Differential Revision: https://reviews.llvm.org/D37825
llvm-svn: 313286
This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
This is how the flag is documented in GNU binutils ld; -Bstatic
only applies to -l options after it, until the next -Bdynamic.
Differential Revision: https://reviews.llvm.org/D37794
llvm-svn: 313175
In MinGW configurations (GCC, or clang with a *-windows-gnu target),
the -export directives in the object file contains the undecorated
symbol name, while it is decorated in MSVC configurations. (On the
command line, link.exe takes an undecorated symbol name for the
-export argument though.)
Differential Revision: https://reviews.llvm.org/D37772
llvm-svn: 313174
This should fix the lto bootstrap.
It is somewhat hard to remember about lazy symbols deep down in the
link. It might be worth it replacing them with undefined symbols once
we are done adding files.
llvm-svn: 313103
https://reviews.llvm.org/rL312796 meant that references to garbage collected common symbols would cause a segfault.
This change fixes the behaviour for references to stripped common symbols.
Differential Revision: https://reviews.llvm.org/D37718
llvm-svn: 313086
On i386, the --entry parameter to GNU ld is supposed to be a decorated
symbol name, while it is an undecorated name in link.exe.
Differential Revision: https://reviews.llvm.org/D37710
llvm-svn: 313066
For now LLD does not setup the least-significant bit for microMIPS
symbols. llvm-objdump does not like that. In attempt to fix
sanitizer-x86_64-linux-fast build-bot let's temporarily check the raw
binary file content.
llvm-svn: 313040
The patch implements initial support of microMIPS code linking:
- Handle microMIPS specific relocations.
- Emit both R1-R5 and R6 microMIPS PLT records.
For now linking mixed set of regular and microMIPS object files is not
supported. Also the patch does not handle (setup and clear) the
least-significant bit of an address which is utilized as the ISA mode
bit and allows to make jump between regular and microMIPS code without
any thunks.
Differential revision: https://reviews.llvm.org/D37335
llvm-svn: 313028
When given
foobar = ALIGN(., 0x100);
my expectation from what the manual says is that the final address of
foobar will be aligned. It seems that bfd aligns the offset in the
section, which causes some odd results if the section is not 0x100
aligned. Gold aligns the address.
This changes lld to align the final address.
llvm-svn: 312979
This adds support for passing LTO flags to the MINGW driver
in GNU LD style i.e. -mllvm flag -> /mllvm:flag
Reviewers: ruiu, mstorsjo
Differential Revision: https://reviews.llvm.org/D37712
llvm-svn: 312956
Pass the -verbose option through to the COFF linker, and show the
arguments passed to it. If the -### option is specified, just show
the produced argument list and exit, just like in clang.
Replace the first argument with "lld-link" in order to produce a
correct command line.
Differential Revision: https://reviews.llvm.org/D37706
llvm-svn: 312944
When building COFF programs many targets such as mingw prefer
to have a gnu ld frontend. Rather then having a fully fledged
standalone driver we wrap a shim around the LINK driver.
Extra tests were provided by mstorsjo
Reviewers: mstorsjo, ruiu
Differential Revision: https://reviews.llvm.org/D33880
llvm-svn: 312926
'@' is a valid character in file paths, but the linker script tokenizer treats it
as a separate token. This was leading to an unexpected test failure, on our local
builds. This patch changes the test to quote the path to prevent this happening.
An alternative would have been to add '@' to the list of "unquoted tokens" in
ScriptLexer.cpp, but ld.bfd has the same behaviour as the current LLD.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D37689
llvm-svn: 312922
This allows combining --dynamic-list and version scripts too. The
version script controls which symbols are visible, and
--dynamic-list controls which of those are preemptible.
Unlike previous versions, undefined symbols are still considered
preemptible, which was the issue breaking the cfi tests.
This fixes pr34053.
llvm-svn: 312806
to separate commons based on file name patterns. The following linker script
construct does not work because commons are allocated before section placement
is done and the only synthesized BssSection that holds all commons has no file
associated with it:
SECTIONS { .common_0 : { *file0.o(COMMON) }}
This patch changes the allocation of commons to create a section per common
symbol and let the section logic do the layout.
Differential revision: https://reviews.llvm.org/D37489
llvm-svn: 312796
There is no need to check anything excepr that
symbol is not in output.
Previously additional iformation like symbol values
or flags were checked, that was not correct.
For example if we would provide symbol with different
value/visibility/type for case when should not provide
symbol at all, testcase would not fail.
llvm-svn: 312779
Simon Atanasyan