It'll almost immediately fail because it always tries to half/double the size
until it finds a legal one. Unfortunately, this triggers an assertion
preventing the DAG fallback from being possible.
llvm-svn: 288834
Check if a build_vector node includes a repeated constant pattern and replace it with a broadcast of that pattern.
For example:
"build_vector <0, 1, 2, 3, 0, 1, 2, 3>" would be replaced by "broadcast <0, 1, 2, 3>"
Differential Revision: https://reviews.llvm.org/D26802
llvm-svn: 288804
This is the final patch in the series of patches that improves
BUILD_VECTOR handling on PowerPC. This adds a few peephole optimizations
to remove redundant instructions. It also adds a large test case which
encompasses a large set of code patterns that build vectors - this test
case was the motivator for this series of patches.
Differential Revision: https://reviews.llvm.org/D26066
llvm-svn: 288800
Summary: This patch makes sure FirstCSPop and MBBI never point to DBG_VALUE instructions, which affected the code generated.
Reviewers: mkuper, aprantl, MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27343
llvm-svn: 288794
This pattern turned a vector sqrt/rcp/rsqrt operation of sse_load_f32/f64 into the the scalar instruction for the operation and put undef into the upper bits. For correctness, the resulting code should still perform the sqrt/rcp/rsqrt on the upper bits after the load is extended since that's what the operation asked for. Particularly in the case where the upper bits are 0, in that case we need calculate the sqrt/rcp/rsqrt of the zeroes and keep the result in the upper-bits. This implies we should be using the packed instruction still.
The only test case for this pattern is one I just added so there was no coverage of this.
llvm-svn: 288784
This occurs due to a pattern that uses sse_load_f32/f64 with vector sqrt/rcp/rsqrt operations and turns them into scalar instructions. Perhaps for the case were the upper bits come from undef this is ok. I believe a (vzmovl load64) would do the same thing but those seems to become vzload instead and selectScalarSSELoad doesn't handle that today. In that case we should be performing the vector operation on the zeros in the upper bits which is not equivalent to using a scalar instruction.
I will remove this pattern in a follow up patch. There appears to be no other test content for it.
llvm-svn: 288783
The intrinsics are supposed to pass the upper bits straight through to their output register. This means we need to make sure we still perform the 128-bit load to get those upper bits to pass to give to the instruction since the memory form of the instruction only reads 32 or 64 bits.
llvm-svn: 288781
The sqrtsd instruction only loads 64-bits and writes bits 63:0 with the sqrt result. Bits 127:64 are preserved in the destination register. The semantics of the intrinsic indicate bits 127:64 should come from the intrinsic argument which in this case is a 128-bit load. So the generated code should have a 128-bit load and use a register form of sqrtsd.
llvm-svn: 288780
The intrinsic takes one argument, the lower bits are affected by the operation and the upper bits should be passed through. The instruction itself takes two operands, the high bits of the first operand are passed through and the low bits of the second operand are modified by the operation. To match this to the intrinsic we should pass the single intrinsic input to both operands.
I had to remove the stack folding test for these instructions since they depended on the incorrect behavior. The same register is now used for both inputs so the load can't be folded.
llvm-svn: 288779
Summary:
This patch removes the scalar logical operation alias instructions. We can just use reg class copies and use the normal packed instructions instead. This removes the need for putting these instructions in the execution domain fixing tables as was done recently.
I removed the loadf64_128 and loadf32_128 patterns as DAG combine creates a narrower load for (extractelt (loadv4f32)) before we ever get to isel.
I plan to add similar patterns for AVX512DQ in a future commit to allow use of the larger register class when available.
Reviewers: spatel, delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27401
llvm-svn: 288771
The structured CFG is just an aid to inserting exec
mask modification instructions, once that is done
we don't really need it anymore. We also
do not analyze blocks with terminators that
modify exec, so this should only be impacting
true branches.
llvm-svn: 288744
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
The function used to finish off PHIs by adding the relevant basic blocks can
fail if we're aborting and still don't actually have the needed
MachineBasicBlocks. So avoid trying in that case.
llvm-svn: 288727
When the entry block was empty after arg lowering, we were always placing
constants at the end. This is probably hamrless while translating the same
block, but horribly wrong once its terminator has been translated. So switch to
inserting at the beginning.
llvm-svn: 288720
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Returning 0 (NoReg) from getOrCreateVReg leads to unexpected situations later
in the translation. It's better to return a valid (if undefined) register and
let the rest of the instruction carry on as planned.
llvm-svn: 288709
This changes the scalar non-intrinsic non-avx roundss/sd instruction
definitions not to read their destination register - allowing partial dependency
breaking.
This fixes PR31143.
Differential Revision: https://reviews.llvm.org/D27323
llvm-svn: 288703
Structure the definitions a bit more like the other classes.
The main change here is to split EXP with the done bit set
to a separate opcode, so we can set mayLoad = 1 so that it won't
be reordered before the other exp stores, since this has the special
constraint that if the done bit is set then this should be the last
exp in she shader.
Previously all exp instructions were inferred to have unmodeled
side effects.
llvm-svn: 288695
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
We treat bitwise 'not' as a special operation and try not to reduce its all-ones mask.
Presumably, this is because a 'not' may be cheaper than a generic 'xor' or it may get
folded into another logic op if the target has those. However, if we can remove a logic
instruction by changing the xor's constant mask value, that should always be a win.
Note that the IR version of SimplifyDemandedBits() does not treat 'not' as a special-case
currently (although that's marked with a FIXME). So if you run this IR through -instcombine,
you should get the same end result. I'm hoping to add a different backend transform that
will expose this problem though, so I need to solve this first.
Differential Revision: https://reviews.llvm.org/D27356
llvm-svn: 288676
Currently the fast isel code emits an avx1 instruction sequence even with avx512. This is different than normal isel. A follow up commit will fix this.
llvm-svn: 288635
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 288561
Summary: Implement custom lowering of SHL_PARTS to enable lowering of left shift with larger than 32-bit shifts.
Reviewers: eliben, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27232
llvm-svn: 288541
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
Summary:
When X = 0 and Y = inf, the original code produces inf, but the transformed
code produces nan. So this transform (and its relatives) should only be
used when the no-infs-fp-math flag is explicitly enabled.
Also disable the transform using fmad (intermediate rounding) when unsafe-math
is not enabled, since it can reduce the precision of the result; consider this
example with binary floating point numbers with two bits of mantissa:
x = 1.01
y = 111
x * (y + 1) = 1.01 * 1000 = 1010 (this is the exact result; no rounding occurs at any step)
x * y + x = 1000.11 + 1.01 =r 1000 + 1.01 = 1001.01 =r 1000 (with rounding towards zero)
The example relies on rounding towards zero at least in the second step.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98578
Reviewers: RKSimon, tstellarAMD, spatel, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26602
llvm-svn: 288506
Since the spill is for the whole wave, these
don't have the swizzling problems that vector stores do
and a single 4-byte allocation is enough to spill a 64 element
register. This should reduce the number of spill instructions and
put all the spills for a register in the same cacheline.
This should save allocated private size, but for now it doesn't.
The extra slots are allocated for each component, but never used
because the frame layout is essentially finalized before frame
indices are replaced. For always using the scalar store path,
this should probably be moved into processFunctionBeforeFrameFinalized.
llvm-svn: 288445
This prevents erratic stepping behavior as well as incorrect source attribution
for sample profiling.
Reviewers: dblakie
Subscribers: llvm-commit
Differential Revision: https://reviews.llvm.org/D27290
llvm-svn: 288442
Summary:
Make AArch64InstrInfo::foldMemoryOperandImpl more general by folding all
full COPYs between register classes of the same size that are either
spilled or refilled.
Reviewers: MatzeB, qcolombet
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27271
llvm-svn: 288439
Summary:
This patch fixes comparison of 64-bit atomic with its expected value in CMP_SWAP_64 expansion.
Currently, the low words are compared with CMP, while the high words are compared with SBC. SBC expects the carry flag to be set if CMP detects a difference. CMP might leave the carry unset for unequal arguments though if the first one is >= than the second. This might cause the comparison logic to detect false equality.
Example of the broken C++ code:
```
std::atomic<long long> at(2);
long long ll = 1;
std::atomic_compare_exchange_strong(&at, &ll, 3);
```
Even though the atomic `at` and the expected value `ll` are not equal and `atomic_compare_exchange_strong` returns `false`, `at` is changed to 3.
The patch replaces SBC with CMPEQ.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D27315
llvm-svn: 288433
The coalescer eliminates copies from reserved registers of the form:
%vregX = COPY %rY
in the case where %rY is a reserved register. However this turns out to
be invalid if only some of the subregisters are reserved (see also
https://reviews.llvm.org/D26648).
Differential Revision: https://reviews.llvm.org/D26687
llvm-svn: 288428
This change fixes a regression in r279537 and
makes getRawSubclassData behave like r279536.
Without this change, the fp128-g.ll test case will have an
infinite loop involving SoftenFloatRes_LOAD.
Differential Revision: http://reviews.llvm.org/D26942
llvm-svn: 288420
This time the issue is fortunately just a simple mistake rather than a horrible
design spectre. I thought SUBS/SBCS provided sufficient NZCV flags for
comparing two 64-bit values, but they don't.
The fix is slightly clunkier in AArch64 because we can't use conditional
execution to emit a pair of CMPs. Traditionally an "icmp ne i128" would map to
an EOR/EOR/ORR/CBNZ, but that uses more registers so it's easier to go with a
CSET/CINC/CBNZ combination. Slightly less efficient, but this is -O0 anyway.
Thanks to Anton Korobeynikov for pointing out the issue.
llvm-svn: 288418
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
llvm-svn: 288296
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.
Differential Revision: https://reviews.llvm.org/D27244
llvm-svn: 288290
The LLDB tests are now ready for this patch.
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288283
Summary:
When computing useful bits for a BFM instruction, we need
to take into consideration the case where both operands
of the BFM are equal and provide data that we need to track.
Not doing this can cause us to miss useful bits.
Fixes PR31138 (https://llvm.org/bugs/show_bug.cgi?id=31138)
Reviewers: t.p.northover, jmolloy
Subscribers: evandro, gberry, srhines, pirama, mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D27130
llvm-svn: 288253
Initial support for target shuffle constant folding in cases where all shuffle inputs are constant. We may be able to relax this and merge shuffles with only some constant inputs in the future.
I've added the helper function getTargetConstantBitsFromNode (based off a similar function in X86ShuffleDecodeConstantPool.cpp) that could be reused for other cases requiring constant vector extraction.
Differential Revision: https://reviews.llvm.org/D27220
llvm-svn: 288250
Summary: Previously 0 and -1 was matched via tablegen rules. But this could cause problems where a physical register was being used where a virtual register was expected (seen in optimizeSelect and TwoAddressInstructionPass). Instead follow AArch64 and match in DAGToDAGISel.
Reviewers: eliben, majnemer
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27171
llvm-svn: 288215
This commit caused some miscompiles that did not show up on any of the bots.
Reverting until we can investigate the cause of those failures.
llvm-svn: 288214
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288212
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
It isn't generally safe to fold the frame index
directly into the operand since it will possibly
not be an inline immediate after it is expanded.
This surprisingly seems to produce better code, since
the FI doesn't prevent folding other immediate operands.
llvm-svn: 288185
Summary:
In AArch64InstrInfo::foldMemoryOperandImpl, catch more cases where the
COPY being spilled is copying from WZR/XZR, but the source register is
not in the COPY destination register's regclass.
For example, when spilling:
%vreg0 = COPY %XZR ; %vreg0:GPR64common
without this change, the code in TargetInstrInfo::foldMemoryOperand()
and canFoldCopy() that normally handles cases like this would fail to
optimize since %XZR is not in GPR64common. So the spill code generated
would be:
%vreg0 = COPY %XZR
STR %vreg
instead of the new code generated:
STR %XZR
Reviewers: qcolombet, MatzeB
Subscribers: mcrosier, aemerson, t.p.northover, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26976
llvm-svn: 288176
This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
It looks like this logic was duplicated long ago and the GCC side of
things has grown additional functionality. We need ${:uid} at least to
generate unique MS inline asm labels (PR23715), so expose these.
llvm-svn: 288092
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask_b32
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a propagation of source SGPR pair in place of v_cmp
is implemented. Additional side effect of this is that we may consume less VGPRs
at a cost of more SGPRs in case if holding of multiple conditions is needed, and
that is a clear win in most cases.
Differential Revision: https://reviews.llvm.org/D26114
llvm-svn: 288053
Tim Northover