Add support to inspect the ELF headers for RISCV targets to determine if
RVC or RVE are enabled and the floating point support to enable. As per
the RISCV specification, d implies f, q implies d implies f, which gives
us the cascading effect that is used to enable the features when setting
up the disassembler. With this change, it is now possible to attach the
debugger to a remote process and be able to disassemble the instruction
stream.
~~~
$ bin/lldb tmp/reduced
(lldb) target create "reduced"
Current executable set to '/tmp/reduced' (riscv64).
(lldb) gdb-remote localhost:1234
(lldb) Process 5737 stopped
* thread #1, name = 'reduced', stop reason = signal SIGTRAP
frame #0: 0x0000003ff7fe1b20
-> 0x3ff7fe1b20: mv a0, sp
0x3ff7fe1b22: jal 1936
0x3ff7fe1b26: mv s0, a0
0x3ff7fe1b28: auipc a0, 27
~~~
We came to the conclusion that this doesn't matter for VSCode/Xcode
because they don't use the default event loop and that other clients
who might care should use the setting.
Differential revision: https://reviews.llvm.org/D120972
When seeing the extra space in the log, it wasn't clear if there was a missing
printf argument. Removing the extra space removes the potential confusion.
This workaround is the source of an awkwared Process->Platform
dependency. While this could be solved in various ways (the only thing
we really use is the plugin name), it may be better to just remove it --
the workaround was added 10 years ago (43c555dfc), and the affected
debugservers were "old" even then, so hopefully they are not in use
anymore.
Differential Revision: https://reviews.llvm.org/D121305
This patch ensures that lldb can automatically load a scripted process
blueprint from a dSYM bundle and launch a scripted process with it.
rdar://74502750
Differential Revision: https://reviews.llvm.org/D121316
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch makes the crashlog interactive mode show the scripted process
status with the crashed scripted thread backtrace after launching it.
rdar://89634338
Differential Revision: https://reviews.llvm.org/D121038
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Most notably, Pass.h is no longer included by TargetMachine.h
before: 1063570306
after: 1063332844
Differential Revision: https://reviews.llvm.org/D121168
Reflow the textual comment which preserves formatted output from
tooling. This makes the content legible again after the lldb source
code was reformatted with automated tooling.
Ensure step-avoid-regexp logs are emitted in the case where the regex has no
capture groups.
Without this change, the log is printed only if the regex has at least one
capture group.
Another change is to the log message: the first capture group has been removed
from the message. There could be zero capture groups, and there could be two or
more capture groups.
Differential Revision: https://reviews.llvm.org/D119298
Add `IsAggregateType` to the SB API.
I'd like to use this from tests, and there are numerous other `Is<X>Type`
predicates on `SBType`.
Differential Revision: https://reviews.llvm.org/D121252
This patch moves the platform creation and selection logic into the
per-debugger platform lists. I've tried to keep functional changes to a
minimum -- the main (only) observable difference in this change is that
APIs, which select a platform by name (e.g.,
Debugger::SetCurrentPlatform) will not automatically pick up a platform
associated with another debugger (or no debugger at all).
I've also added several tests for this functionality -- one of the
pleasant consequences of the debugger isolation is that it is now
possible to test the platform selection and creation logic.
This is a product of the discussion at
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>.
Differential Revision: https://reviews.llvm.org/D120810
Embedded nul characters are still printed, and they don't terminate the
string. See also D111634.
Differential Revision: https://reviews.llvm.org/D120803
Our SIGTSTP handler was working, but that was mostly accidental.
The reason it worked is because lldb is multithreaded for most of its
lifetime and the OS is reasonably fast at responding to signals. So,
what happened was that the kill(SIGTSTP) which we sent from inside the
handler was delivered to another thread while the handler was still set
to SIG_DFL (which then correctly put the entire process to sleep).
Sometimes it happened that the other thread got the second signal after
the first thread had already restored the handler, in which case the
signal handler would run again, and it would again attempt to send the
SIGTSTP signal back to itself.
Normally it didn't take many iterations for the signal to be delivered
quickly enough. However, if you were unlucky (or were playing around
with pexpect) you could get SIGTSTP while lldb was single-threaded, and
in that case, lldb would go into an endless loop because the second
SIGTSTP could only be handled on the main thread, and only after the
handler for the first signal returned (and re-installed itself). In that
situation the handler would keep re-sending the signal to itself.
This patch fixes the issue by implementing the handler the way it
supposed to be done:
- before sending the second SIGTSTP, we unblock the signal (it gets
automatically blocked upon entering the handler)
- we use raise to send the signal, which makes sure it gets delivered to
the thread which is running the handler
This also means we don't need the SIGCONT handler, as our TSTP handler
resumes right after the entire process is continued, and we can do the
required work there.
I also include a test case for the SIGTSTP flow. It uses pexpect, but it
includes a couple of extra twists. Specifically, I needed to create an
extra process on top of lldb, which will run lldb in a separate process
group and simulate the role of the shell. This is needed because SIGTSTP
is not effective on a session leader (the signal gets delivered, but it
does not cause a stop) -- normally there isn't anyone to notice the
stop.
Differential Revision: https://reviews.llvm.org/D120320
This ensures that the user is aware that many commands will not work
correctly.
We print the warning only once (per module) to avoid spamming the user
with potentially thousands of error messages.
Differential Revision: https://reviews.llvm.org/D120892
Add a --exists/-e flag to `settings set` that sets the setting if it
exists, but doesn't print an error otherwise. This is useful for example
when setting options in your ~/.lldbinit that might not exist in older
versions of lldb.
Differential revision: https://reviews.llvm.org/D121155
Of course I only noticed these things *after* landing the original
patch...
- Flush the output after clearing the line.
- Move up the printing the carriage return to avoid duplication.
- Use hexadecimal instead of octal for escape codes.
This got lost while iterating on the patch. We need to always move the
cursor to the front of the line so that if something else
(asynchronously) prints to the debugger's output it overwrites the
progress message.
Add a setting to change how progress is shown in a color enabled
terminal. This follows the existing -prefix, -suffix pattern
that's used elsewhere in lldb.
Differential revision: https://reviews.llvm.org/D121062
This patch adds support for showing progress events when using lldb on
the command line. It spawns a separate thread that listens for progress
events and prints them to the debugger's output stream.
It's nothing fancy (yet), for now it just prints the progress message.
If we know the total number of items being processed, we prefix the
message with something like [1/100], similar to ninja's output.
This patch doesn't use any fancy terminal manipulation: it uses a simple
carriage return (\r) to bring the cursor to the front of the line and
vt100 escape codes to clear the (rest) of the line.
Differential revision: https://reviews.llvm.org/D120972
This patch disables TestIOHandlerProcessSTDIO.py for Arm/AArch64 Linux
to silence random test failures on buildbots. IO handler tests are known
to randomly fail on arm/aarch64 linux buildbots due to pexpect timeouts.
The old command wrote to CWD, which doesn't always work, and if it
didn't, there was no workaround (and it crashed on failure). This
patch changed the setting to provide a directory to save the objects
to.
Differential Revision: https://reviews.llvm.org/D121036
Support ANSI escape codes for bright colors variants. Most modern
terminals support them. LLDB is not using them in any of its defaults,
but they're useful for people who want to modify their preferred ANSI
prefix/suffix.
Differential revision: https://reviews.llvm.org/D121131
This improves this test a lot because before when using the "attachCommands" to run the following commands:
(lldb) target create -d /path/to/a.out
(lldb) process launch
This was racy as it wasn't stopping the program at the entry point, and the process might run to completion before we can even debug it. With the recent changes to the "attachCommands" we were waiting for the process to stop, but the process might be exited already, and that _should_ have caused the attach to fail since there was no process to attach to. By adding "--stop-at-entry" to the process launch, we ensure this should be less racy and give us a valid process to attach to.
I'm a big fan of the autosuggestion feature but my terminal/color scheme
doesn't display faint any differently than regular lldb output, which
makes the feature a little confusing. This patch add a setting to change
the autosuggestion ANSI escape codes.
For example, to display the autosuggestion in italic, you can add this
to your ~/.lldbinit
settings set show-autosuggestion-ansi-prefix ${ansi.italic}
setting set show-autosuggestion-ansi-suffix ${ansi.normal}
Differential revision: https://reviews.llvm.org/D121064
This disables TestScriptedProcess.test_scripted_process_and_scripted_thread
on Windows since the inferior binary a linked to a dylib that doesn't
build on Windows.
This should fix https://lab.llvm.org/buildbot/#/builders/83/builds/16100
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new way to load modules programatically with
Scripted Processes. To do so, the scripted process blueprint holds a
list of dictionary describing the modules to load, which their path or
uuid, load address and eventually a slide offset.
LLDB will fetch that list after launching the ScriptedProcess, and
iterate over each entry to create the module that will be loaded in the
Scripted Process' target.
The patch also refactors the StackCoreScriptedProcess test to stop
inside the `libbaz` module and make sure it's loaded correctly and that
we can fetch some variables from it.
rdar://74520238
Differential Revision: https://reviews.llvm.org/D120969
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch replaces the calls to ErrorWithMessage using the GetInterface
message by a call to the static method directly.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch re-enables TestEvents.py on Darwin and fixes some crashes
that were happening due to an undefined method.
I ran it 100 times locally with the following command and it passed
every the time:
```
for i in {1..100}; do print $i/100; ./bin/lldb-dotest -p TestEvents.py 2>&1 | rg PASSED; if [ "$?" -eq "1" ]; then break; fi; done
```
Let's see if it still fails non-deterministically on the bots and
eventually also re-enable it on linux.
rdar://37037235
Differential Revision: https://reviews.llvm.org/D120607
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This is a modified version of a previous patch that was reverted: https://reviews.llvm.org/D119797
This version only waits for the process to stop when using "launchCommands" or "attachCommands"...
...and doesn't play with the async mode when doing normal launch/attach.
We discovered that when using "launchCommands" or "attachCommands" that there was an issue where these commands were not being run synchronously. There were further problems in this case where we would get thread events for the process that was just launched or attached before the IDE was ready, which is after "configurationDone" was sent to lldb-vscode.
This fix introduces the ability to wait for the process to stop after "launchCommands" or "attachCommands" are run to ensure that we have a stopped process point that is ready for the debug session to proceed. We spin up the thread that listens for process events before we start the launch or attach, but we don't want stop events being delivered through the DAP protocol until the "configurationDone" packet is received. We now always ignore the stop event with a stop ID of 1, which is the first stop. All normal launch and attach scenarios use the synchronous mode, and "launchCommands and "attachCommands" run an array of LLDB commands in async mode.
This should make our launch with "launchCommands" and attach with "attachCommands" avoid a race condition when the process is being launched or attached.
Differential Revision: https://reviews.llvm.org/D120755
This patch removes the ability to instantiate the LLDB FileSystem class
with a FileCollector. It keeps the ability to collect files, but uses
the FileCollectorFileSystem to do that transparently.
Because the two are intertwined, this patch also removes the
finalization logic which copied the files over out of process.
1) Make the BreakpointEventData::Dump actually do something useful.
2) Make the Breakpoint events print when the break log channel is on
without having to turn on the events channel.
Differential Revision: https://reviews.llvm.org/D120917
Dave Lee