This reverts commit faac033f7364bb4226e22c8079c221c96af10d02.
The test depends on all targets to be enabled in llc in order to pass,
and needs to be rewritten/refactored to not have that dependency.
llvm-svn: 218393
For biendian targets like ARM and AArch64, it is useful to have the
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 218391
This change fixes the ARM and AArch64 relocation visitors in
RelocVisitor. They were unconditionally assuming the object data are
little-endian. Tests have been added to ensure that the
llvm-dwarfdump utility does not crash when processing big-endian
object files.
Patch by Charlie Turner.
llvm-svn: 218389
This change replaces the brittle if/else chain of string comparisons
with a switch statement on the detected target triple, removing the
need for testing arbitrary architecture names returned from
getFileFormatName, whose primary purpose seems to be for display
(user-interface) purposes. The visitor now takes a reference to the
object file, rather than its arbitrary file format name to figure out
whether the file is a 32 or 64-bit object file and what the detected
target triple is.
A set of tests have been added to help show that the refactoring processes
relocations for the same targets as the original code.
Patch by Charlie Turner.
llvm-svn: 218388
The doFinalization method checks that the LoopToAliasSetMap is
empty. LICM populates that map as it runs through the loop nest,
deleting the entries for child loops as it goes. However, if a child
loop is deleted by another pass (e.g. unrolling) then the loop will
never be deleted from the map because LICM walks the loop nest to
find entries it can delete.
The fix is to delete the loop from the map and free the alias set
when the loop is deleted from the loop nest.
Differential Revision: http://reviews.llvm.org/D5305
llvm-svn: 218387
Summary:
This patch makes use of AtomicExpandPass in Power for inserting fences around
atomic as part of an effort to remove fence insertion from SelectionDAGBuilder.
As a big bonus, it lets us use sync 1 (lightweight sync, often used by the mnemonic
lwsync) instead of sync 0 (heavyweight sync) in many cases.
I also added a test, as there was no test for the barriers emitted by the Power
backend for atomic loads and stores.
Test Plan: new test + make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5180
llvm-svn: 218331
Summary:
The goal is to eventually remove all the code related to getInsertFencesForAtomic
in SelectionDAGBuilder as it is wrong (designed for ARM, not really portable, works
mostly by accident because the backends are overly conservative), and repeats the
same logic that goes in emitLeading/TrailingFence.
In this patch, I make AtomicExpandPass insert the fences as it knows better
where to put them. Because this requires getting the fences and not just
passing an IRBuilder around, I had to change the return type of
emitLeading/TrailingFence.
This code only triggers on ARM for now. Because it is earlier in the pipeline
than SelectionDAGBuilder, it triggers and lowers atomic accesses to atomic so
SelectionDAGBuilder does not add barriers anymore on ARM.
If this patch is accepted I plan to implement emitLeading/TrailingFence for all
backends that setInsertFencesForAtomic(true), which will allow both making them
less conservative and simplifying SelectionDAGBuilder once they are all using
this interface.
This should not cause any functionnal change so the existing tests are used
and not modified.
Test Plan: make check-all, benefits from existing tests of atomics on ARM
Reviewers: jfb, t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5179
llvm-svn: 218329
This patch removes the old JIT memory manager (which does not provide any
useful functionality now that the old JIT is gone), and migrates the few
remaining clients over to SectionMemoryManager.
http://llvm.org/PR20848
llvm-svn: 218316
Summary:
This fixes a couple of issues. One is ensuring that AOK_Label rewrite
rules have a lower priority than AOK_Skip rules, as AOK_Skip needs to
be able to skip the brackets properly. The other part of the fix ensures
that we don't overwrite Identifier when looking up the identifier, and
that we use the locally available information to generate the AOK_Label
rewrite in ParseIntelIdentifier. Doing that in CreateMemForInlineAsm
would be problematic since the Start location there may point to the
beginning of a bracket expression, and not necessarily the beginning of
an identifier.
This also means that we don't need to carry around the InternlName field,
which helps simplify the code.
Test Plan: This will be tested on the clang side.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5445
llvm-svn: 218270
Summary:
r218229 made this function return a dummy nullptr in order to avoid
API breakage between clang/llvm.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5432
llvm-svn: 218266
As of July 2014, all backends have been updated to implement
AtomicRMWInst::Nand as ~(x & y) (and not as x & ~y, as some did previously).
This was added to the release notes in r212635 (and the LangRef had been
changed), but it seems that we forgot to update the header-file description.
llvm-svn: 218236
The implementation of the callback in clang's Sema will return an
internal name for labels.
Test Plan: Will be tested in clang.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4587
llvm-svn: 218229
This is purely a plumbing patch. No functional changes intended.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
The first step is to add a target hook for RSQRTE, take the already target-independent code selfishly hoarded by PPC, and put it into DAGCombiner.
Next steps:
The code in DAGCombiner::BuildRSQRTE() should be refactored further; tests that exercise that logic need to be added.
Logic in PPCTargetLowering::BuildRSQRTE() should be hoisted into DAGCombiner.
X86 and AArch64 overrides for TargetLowering.BuildRSQRTE() should be added.
Differential Revision: http://reviews.llvm.org/D5425
llvm-svn: 218219
This splits the logic for actually looking up coverage information
from the logic that displays it. These were tangled rather thoroughly
so this change is a bit large, but it mostly consists of moving things
around. The coverage lookup logic itself now lives in the library,
rather than being spread between the library and the tool.
llvm-svn: 218184
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
llvm-svn: 218120
With this optimization, we will not always insert zext for values crossing
basic blocks, but insert sext if the users of a value crossing basic block
has preference of sign predicate.
llvm-svn: 218101
This format is simply a regular object file with the bitcode stored in a
section named ".llvmbc", plus any number of other (non-allocated) sections.
One immediate use case for this is to accommodate compilation processes
which expect the object file to contain metadata in non-allocated sections,
such as the ".go_export" section used by some Go compilers [1], although I
imagine that in the future we could consider compiling parts of the module
(such as large non-inlinable functions) directly into the object file to
improve LTO efficiency.
[1] http://golang.org/doc/install/gccgo#Imports
Differential Revision: http://reviews.llvm.org/D4371
llvm-svn: 218078
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
llvm-svn: 218004
This type isn't owned polymorphically (as demonstrated by making the
dtor protected and everything still compiling) so just address the
warning by protecting the base dtor and making the derived class final.
llvm-svn: 217990
It isn't always useful to skip blank lines, as evidenced by the
somewhat awkward use of line_iterator in llvm-cov. This adds a knob to
control whether or not to skip blanks.
llvm-svn: 217960
Summary: These will be used to implement support for useful forward declarartions.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5328
llvm-svn: 217949
This required a new hook called hasLoadLinkedStoreConditional to know whether
to expand atomics to LL/SC (ARM, AArch64, in a future patch Power) or to
CmpXchg (X86).
Apart from that, the new code in AtomicExpandPass is mostly moved from
X86AtomicExpandPass. The main result of this patch is to get rid of that
pass, which had lots of code duplicated with AtomicExpandPass.
llvm-svn: 217928
By class-instance values I mean 'Class<Arg>' in 'Class<Arg>.Field' or in
'Other<Class<Arg>>' (syntactically s SimpleValue). This is to differentiate
from unnamed/anonymous record definitions (syntactically an ObjectBody) which
are not affected by this change.
Consider the testcase:
class Struct<int i> {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
class Class<Struct s> {
int Class_J = s.J;
}
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
defm Defm : MultiClass<2>;
Before this fix, DefmDef.Class_J yields !shl(I, 1) instead of 8.
This is the sequence of events. We start with this:
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
During ParseDef the anonymous object for the class-instance value is created:
multiclass Multiclass<int i> {
def anonymous_0 : Struct<i>;
def Def : Class<NAME#anonymous_0>;
}
Then class Struct<i> is added to anonymous_0. Also Class<NAME#anonymous_0> is
added to Def:
multiclass Multiclass<int i> {
def anonymous_0 {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
def Def {
int Class_J = NAME#anonymous_0.J;
}
}
So far so good but then we move on to instantiating this in the defm
by substituting the template arg 'i'.
This is how the anonymous prototype looks after fully instantiating.
defm Defm = {
def Defmanonymous_0 {
int I = 4;
int J = !shl(I, 1);
}
Note that we only resolved the reference to the template arg. The
non-template-arg reference in 'J' has not been resolved yet.
Then we go on to instantiating the Def prototype:
def DefmDef {
int Class_J = NAME#anonymous_0.J;
}
Which is resolved to Defmanonymous_0.J and then to !shl(I, 1).
When we fully resolve each record in a defm, Defmanonymous_0.J does get set
to 8 but that's too late for its use.
The patch adds a new attribute to the Record class that indicates that this
def is actually a class-instance value that may be *used* by other defs in a
multiclass. (This is unlike regular defs which don't reference each other and
thus can be resolved indepedently.) They are then fully resolved before the
other defs while the multiclass is instantiated.
I added vg_leak to the new test. I am not sure if this is necessary but I
don't think I have a way to test it. I can also check in without the XFAIL
and let the bots test this part.
Also tested that X86.td.expanded and AAarch64.td.expanded were unchange before
and after this change. (This issue triggering this problem is a WIP patch.)
Part of <rdar://problem/17688758>
llvm-svn: 217886
objects. There were a few FIXMEs in ARMAsmBackend.cpp suggesting the class
definitions should be in a separate file. Starting with ARMAsmBackend, the
class definition has been put in a header file, and #includes reduced. Each
sub-type of ARMAsmBackend is now in its own header file.
Derived types have been painted with a different color of bike-shed:
s/DarwinARMAsmBackend/ARMAsmBackendDarwin/g
s/ARMWinCOFFAsmBackend/ARMAsmBackendWinCOFF/g
s/ELFARMAsmBackend/ARMAsmBackendELF/g
Finally, clang-format has been run across ARMAsmBackend.cpp
llvm-svn: 217866
Teach yaml2obj how to make a bigobj COFF file. Like the rest of LLVM,
we automatically decide whether or not to use regular COFF or bigobj
COFF on the fly depending on how many sections the resulting object
would have.
This ends the task of adding bigobj support to LLVM.
N.B. This was tested by forcing yaml2obj to be used in bigobj mode
regardless of the number of sections. While a dedicated test was
written, the smallest I could make it was 36 MB (!) of yaml and it still
took a significant amount of time to execute on a powerful machine.
llvm-svn: 217858
This finishes the ability of llvm-objdump to print out all information from
the LC_DYLD_INFO load command.
The -bind option prints out symbolic references that dyld must resolve
immediately.
The -lazy-bind option prints out symbolc reference that are lazily resolved on
first use.
The -weak-bind option prints out information about symbols which dyld must
try to coalesce across images.
llvm-svn: 217853
This lowers frem to a runtime libcall inside fast-isel.
The test case also checks the CallLoweringInfo bug that was exposed by this
change.
This fixes rdar://problem/18342783.
llvm-svn: 217833
This fixes a bug in FastISel::CallLoweringInfo, where the number of
arguments was obtained from the argument vector before it had been
initialized.
Test case follows in another commit.
llvm-svn: 217832
We already have routines to encode SLEB128 as well as encode/decode ULEB128.
This last function fills out the matrix. I'll need this for some llvm-objdump
work I am doing.
llvm-svn: 217830
Teach WinCOFFObjectWriter how to write -mbig-obj style object files;
these object files allow for more sections inside an object file.
Our support for BigObj is notably different from binutils and cl: we
implicitly upgrade object files to BigObj instead of asking the user to
compile the same file *again* but with another flag. This matches up
with how LLVM treats ELF variants.
This was tested by forcing LLVM to always emit BigObj files and running
the entire test suite. A specific test has also been added.
I've lowered the maximum number of sections in a normal COFF file,
VS "14" CTP 3 supports no more than 65279 sections. This is important
otherwise we might not switch to BigObj quickly enough, leaving us with
a COFF file that we couldn't link.
yaml2obj support is all that remains to implement.
Differential Revision: http://reviews.llvm.org/D5349
llvm-svn: 217812
There's some other cleanup that could happen here, but this is at least
the mechanical transformation to unique_ptr.
Derived from a patch by Anton Yartsev.
llvm-svn: 217803
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
llvm-svn: 217801
More methods to follow.
Using StringRef allows us the EE interface to work with more string types
without forcing construction of std::strings.
llvm-svn: 217794
This doesn't change the interface or gives additional safety but removes
a ton of retain/release boilerplate.
No functionality change.
llvm-svn: 217778
RAUW was only used on DIType to merge declarations and full definitions
of types. In order to support the same functionality for functions and
global variables, move the function up type DI type hierarchy to the
common parent of DIType, DISubprogram and DIVariable which is
DIDescriptor.
This functionality will be exercized when we add the code to emit
imported declarations for forward declared function/variables.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5325
llvm-svn: 217748
A single function in SourceCoverageDataManager was the only user of
some of the comparisons in CounterMappingRegion, and at this point we
know that only one file is relevant. This lets us use slightly simpler
logic directly in the client.
llvm-svn: 217745
Similar to my previous -exports-trie option, the -rebase option dumps info from
the LC_DYLD_INFO load command. The rebasing info is a list of the the locations
that dyld needs to adjust if a mach-o image is not loaded at its preferred
address. Since ASLR is now the default, images almost never load at their
preferred address, and thus need to be rebased by dyld.
llvm-svn: 217709
Summary: This will be used in clang.
Test Plan: Will be tested on the clang side.
Reviewers: hansw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5337
llvm-svn: 217702
The main difference is the removal of
std::error_code exists(const Twine &path, bool &result);
It was an horribly redundant interface since a file not existing is also a valid
error_code. Now we have an access function that returns just an error_code. This
is the only function that has to be implemented for Unix and Windows. The
functions can_write, exists and can_execute an now just wrappers.
One still has to be very careful using these function to avoid introducing
race conditions (Time of check to time of use).
llvm-svn: 217625
Leveraging both intrusive shared_ptr-ing (std::enable_shared_from_this)
and shared_ptr<T>-owning-U (to allow external users to hold
std::shared_ptr<CostT> while keeping the underlying PoolEntry alive).
The intrusiveness could be removed if we had a weak_set that implicitly
removed items from the set when their underlying data went away.
This /might/ fix an existing memory leak reported by LeakSanitizer in
r217504.
llvm-svn: 217563
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
llvm-svn: 217548
Summary:
Make CallingConv::ID a plain unsigned instead of enum with a
fixed set of valus. LLVM IR allows arbitraty calling conventions (you are
free to write cc12345), and loading them as enum is an undefined
behavior. This was reported by UBSan.
Test Plan: llvm regression test suite
Reviewers: nicholas
Reviewed By: nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5248
llvm-svn: 217529
"Unroll" is not the appropriate name for this variable. Clang already uses
the term "interleave" in pragmas and metadata for this.
Differential Revision: http://reviews.llvm.org/D5066
llvm-svn: 217528
This adds support for reading the "bigobj" variant of COFF produced by
cl's /bigobj and mingw's -mbig-obj.
The most significant difference that bigobj brings is more than 2**16
sections to COFF.
bigobj brings a few interesting differences with it:
- It doesn't have a Characteristics field in the file header.
- It doesn't have a SizeOfOptionalHeader field in the file header (it's
only used in executable files).
- Auxiliary symbol records have the same width as a symbol table entry.
Since symbol table entries are bigger, so are auxiliary symbol
records.
Write support will come soon.
Differential Revision: http://reviews.llvm.org/D5259
llvm-svn: 217496
Summary:
This patch moves the profile reading logic out of the Sample Profile
transformation into a generic profile reader facility in
lib/ProfileData.
The intent is to use this new reader to implement a sample profile
reader/writer that can be used to convert sample profiles from external
sources into LLVM.
This first patch introduces no functional changes. It moves the profile
reading code from lib/Transforms/SampleProfile.cpp into
lib/ProfileData/SampleProfReader.cpp.
In subsequent patches I will:
- Add a bitcode format for sample profiles to allow for more efficient
encoding of the profile.
- Add a writer for both text and bitcode format profiles.
- Add a 'convert' command to llvm-profdata to be able to convert between
the two (and serve as entry point for other sample profile formats).
Reviewers: bogner, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5250
llvm-svn: 217437
llvm-cov had a SourceRange type that was nearly identical to a
CountedRegion except that it shaved off a couple of fields. There
aren't likely to be enough of these for the minor memory savings to be
worth the extra complexity here.
llvm-svn: 217417
Previously, fast-isel would not clean up after failing to select a call
instruction, because it would have called flushLocalValueMap() which moves
the insertion point, making SavedInsertPt in selectInstruction() invalid.
Fixing this by making SavedInsertPt a member variable, and having
flushLocalValueMap() update it.
This removes some redundant code at -O0, and more importantly fixes PR20863.
Differential Revision: http://reviews.llvm.org/D5249
llvm-svn: 217401
to make sure we don't do invalid load of an enum. Share the
conversion code between llvm::Module implementation and the
verifier.
This bug was reported by UBSan.
llvm-svn: 217395
This change teaches LazyValueInfo to use the @llvm.assume intrinsic. Like with
the known-bits change (r217342), this requires feeding a "context" instruction
pointer through many functions. Aside from a little refactoring to reuse the
logic that turns predicates into constant ranges in LVI, the only new code is
that which can 'merge' the range from an assumption into that otherwise
computed. There is also a small addition to JumpThreading so that it can have
LVI use assumptions in the same block as the comparison feeding a conditional
branch.
With this patch, we can now simplify this as expected:
int foo(int a) {
__builtin_assume(a > 5);
if (a > 3) {
bar();
return 1;
}
return 0;
}
llvm-svn: 217345
This adds a ScalarEvolution-powered transformation that updates load, store and
memory intrinsic pointer alignments based on invariant((a+q) & b == 0)
expressions. Many of the simple cases we can get with ValueTracking, but we
still need something like this for the more complicated cases (such as those
with an offset) that require some algebra. Note that gcc's
__builtin_assume_aligned's optional third argument provides exactly for this
kind of 'misalignment' offset for which this kind of logic is necessary.
The primary motivation is to fixup alignments for vector loads/stores after
vectorization (and unrolling). This pass is added to the optimization pipeline
just after the SLP vectorizer runs (which, admittedly, does not preserve SE,
although I imagine it could). Regardless, I actually don't think that the
preservation matters too much in this case: SE computes lazily, and this pass
won't issue any SE queries unless there are any assume intrinsics, so there
should be no real additional cost in the common case (SLP does preserve DT and
LoopInfo).
llvm-svn: 217344
This change, which allows @llvm.assume to be used from within computeKnownBits
(and other associated functions in ValueTracking), adds some (optional)
parameters to computeKnownBits and friends. These functions now (optionally)
take a "context" instruction pointer, an AssumptionTracker pointer, and also a
DomTree pointer, and most of the changes are just to pass this new information
when it is easily available from InstSimplify, InstCombine, etc.
As explained below, the significant conceptual change is that known properties
of a value might depend on the control-flow location of the use (because we
care that the @llvm.assume dominates the use because assumptions have
control-flow dependencies). This means that, when we ask if bits are known in a
value, we might get different answers for different uses.
The significant changes are all in ValueTracking. Two main changes: First, as
with the rest of the code, new parameters need to be passed around. To make
this easier, I grouped them into a structure, and I made internal static
versions of the relevant functions that take this structure as a parameter. The
new code does as you might expect, it looks for @llvm.assume calls that make
use of the value we're trying to learn something about (often indirectly),
attempts to pattern match that expression, and uses the result if successful.
By making use of the AssumptionTracker, the process of finding @llvm.assume
calls is not expensive.
Part of the structure being passed around inside ValueTracking is a set of
already-considered @llvm.assume calls. This is to prevent a query using, for
example, the assume(a == b), to recurse on itself. The context and DT params
are used to find applicable assumptions. An assumption needs to dominate the
context instruction, or come after it deterministically. In this latter case we
only handle the specific case where both the assumption and the context
instruction are in the same block, and we need to exclude assumptions from
being used to simplify their own ephemeral values (those which contribute only
to the assumption) because otherwise the assumption would prove its feeding
comparison trivial and would be removed.
This commit adds the plumbing and the logic for a simple masked-bit propagation
(just enough to write a regression test). Future commits add more patterns
(and, correspondingly, more regression tests).
llvm-svn: 217342
This adds a set of utility functions for collecting 'ephemeral' values. These
are LLVM IR values that are used only by @llvm.assume intrinsics (directly or
indirectly), and thus will be removed prior to code generation, implying that
they should be considered free for certain purposes (like inlining). The
inliner's cost analysis, and a few other passes, have been updated to account
for ephemeral values using the provided functionality.
This functionality is important for the usability of @llvm.assume, because it
limits the "non-local" side-effects of adding llvm.assume on inlining, loop
unrolling, etc. (these are hints, and do not generate code, so they should not
directly contribute to estimates of execution cost).
llvm-svn: 217335
This adds an immutable pass, AssumptionTracker, which keeps a cache of
@llvm.assume call instructions within a module. It uses callback value handles
to keep stale functions and intrinsics out of the map, and it relies on any
code that creates new @llvm.assume calls to notify it of the new instructions.
The benefit is that code needing to find @llvm.assume intrinsics can do so
directly, without scanning the function, thus allowing the cost of @llvm.assume
handling to be negligible when none are present.
The current design is intended to be lightweight. We don't keep track of
anything until we need a list of assumptions in some function. The first time
this happens, we scan the function. After that, we add/remove @llvm.assume
calls from the cache in response to registration calls and ValueHandle
callbacks.
There are no new direct test cases for this pass, but because it calls it
validation function upon module finalization, we'll pick up detectable
inconsistencies from the other tests that touch @llvm.assume calls.
This pass will be used by follow-up commits that make use of @llvm.assume.
llvm-svn: 217334
Instead of aligning and moving the CurPtr forward, and then comparing
with End, simply calculate how much space is needed, and compare that
to how much is available.
Hopefully this avoids any doubts about comparing addresses possibly
derived from past the end of the slab array, overflowing, etc.
Also add a test where aligning CurPtr would move it past End.
llvm-svn: 217330
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
llvm-svn: 217310
Summary:
This fixes a long standing issue where we would emit many little .text
sections and only one .pdata and .xdata section. Now we generate one
.pdata / .xdata pair per .text section and associate them correctly.
Fixes PR19667.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5181
llvm-svn: 217176
Summary:
Split shouldExpandAtomicInIR() into different versions for Stores/Loads/RMWs/CmpXchgs.
Makes runOnFunction cleaner (no more redundant checking/casting), and will help moving
the X86 backend to this pass.
This requires a way of easily detecting which instructions are atomic.
I followed the pattern of mayReadFromMemory, mayWriteOrReadMemory, etc.. in making
isAtomic() a method of Instruction implemented by a switch on the opcodes.
Test Plan: make check
Reviewers: jfb
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D5035
llvm-svn: 217080
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
llvm-svn: 217075
This patch adds to LLVMSupport the capability of writing files with
international characters encoded in the current system encoding. This
is relevant for Windows, where we can either use UTF16 or the current
code page (the legacy Windows international characters). On UNIX, the
file is always saved in UTF8.
This will be used in a patch for clang to thoroughly support response
files creation when calling other tools, addressing PR15171. On
Windows, to correctly support internationalization, we need the
ability to write response files both in UTF16 or the current code
page, depending on the tool we will call. GCC for mingw, for instance,
requires files to be encoded in the current code page. MSVC tools
requires files to be encoded in UTF16.
Patch by Rafael Auler!
llvm-svn: 217068
Things got a little bit messy over the years and it is time for a little bit
spring cleaning.
This first commit is focused on the FastISel base class itself. It doxyfies all
comments, C++11fies the code where it makes sense, renames internal methods to
adhere to the coding standard, and clang-formats the files.
Reviewed by Eric
llvm-svn: 217060
I took a guess at the changes to the gold plugin, because that doesn't
seem to build by default for me. Not sure what dependencies I might be
missing for that.
llvm-svn: 217056
This forces callers to use std::move when calling it. It is somewhat odd to have
code with std::move that doesn't always move, but it is also odd to have code
without std::move that sometimes moves.
llvm-svn: 217049
An unpleasant surprise while migrating unique_ptrs (see changes in
lib/Object): ErrorOr<int*> was implicitly convertible to
ErrorOr<std::unique_ptr<int>>.
Keep the explicit conversions otherwise it's a pain to convert
ErrorOr<int*> to ErrorOr<std::unique_ptr<int>>.
I'm not sure if there should be more SFINAE on those explicit ctors (I
could check if !is_convertible && is_constructible, but since the ctor
has to be called explicitly I don't think there's any need to disable
them when !is_constructible - they'll just fail anyway. It's the
converting ctors that can create interesting ambiguities without proper
SFINAE). I had to SFINAE the explicit ones because otherwise they'd be
ambiguous with the implicit ones in an explicit context, so far as I
could tell.
The converting assignment operators seemed unnecessary (and similarly
buggy/dangerous) - just rely on the converting ctors to convert to the
right type for assignment instead.
llvm-svn: 217048
Adding 'IR' to the names in an attempt to be less ambiguous about the flags we're dealing with here.
The 'and' method is needed by the SLPVectorizer (PR20802) and possibly other passes.
llvm-svn: 217004
The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
llvm-svn: 216983
In theory, alignPtr() could push a pointer beyond the end of the current slab, making
comparisons with that pointer undefined behaviour. Use an integer type to avoid this.
llvm-svn: 216973
This provides an implementation of CFL alias analysis (including some
supporting data structures). Currently, we don't have any extremely fancy
features, sans some interprocedural analysis (i.e. no field sensitivity, etc.),
and we do best sitting behind BasicAA + TBAA. In such a configuration, we take
~0.6-0.8% of total compile time, and give ~7-8% NoAlias responses to queries
TBAA and BasicAA couldn't answer when bootstrapping LLVM. In testing this on
other projects, we've seen up to 10.5% of queries dropped by BasicAA+TBAA
answered with NoAlias by this algorithm.
Patch by George Burgess IV (with minor modifications by me -- mostly adapting
some BasicAA tests), thanks!
llvm-svn: 216970
This allows the target to disable target-independent instruction selection and
jump directly into the target-dependent instruction selection code.
This can be beneficial for targets, such as AArch64, which could emit much
better code, but never got a chance to do so, because the target-independent
instruction selector was able to find an instruction sequence.
llvm-svn: 216947
"Setting" does not equal "copying". This bug has sat dormant for 2 reasons:
1. The unit test was not adequate.
2. Every current user of the "copyFastMathFlags" API is operating on a new instruction.
(ie, all existing fast-math flags are off). If you copy flags to an existing
instruction that has some flags on already, you will not necessarily turn them off
as expected.
I uncovered this bug while trying to implement a fix for PR20802.
llvm-svn: 216939
This removes static initializers from the backends which generate this data, and also makes this struct match the other Tablegen generated structs in behaviour
Reviewed by Andy Trick and Chandler C
llvm-svn: 216919
Rather than passing by lvalue reference, pass by value to ensure that
the caller provides an rvalue (and use move assignment, rather than
release+reset, to assign to the member variable)
llvm-svn: 216916
We have been using .init-array for most systems for quiet some time,
but tools like llc are still defaulting to .ctors because the old
option was never changed.
This patch makes llc default to .init-array and changes the option to
be -use-ctors.
Clang is not affected by this. It has its own fancier logic.
llvm-svn: 216905
This is an enum class, and will be appropriately prefixed, making the encoding
type prefix redundant. No change to any uses as the use of this was not yet
introduced.
llvm-svn: 216893
The loop vectorizer preserves wrapping, exact, and fast-math properties of scalar instructions.
This patch adds a convenience method to make that operation easier because we need to do this
in the loop vectorizer, SLP vectorizer, and possibly other places.
Although this is a 'no functional change' patch, I've added a testcase to verify that the exact
flag is preserved by the loop vectorizer. The wrapping and fast-math flags are already checked
in existing testcases.
Differential Revision: http://reviews.llvm.org/D5138
llvm-svn: 216886
This feeds AA through the IFI structure into the inliner so that
AddAliasScopeMetadata can use AA->getModRefBehavior to figure out which
functions only access their arguments (instead of just hard-coding some
knowledge of memory intrinsics). Most of the information is only available from
BasicAA; this is important for preserving alias scoping information for
target-specific intrinsics when doing the noalias parameter attribute to
metadata conversion.
llvm-svn: 216866
This allows streams that only use BLOCKINFO for debugging purposes to omit
the block entirely. As long as another stream is available with the correct
BLOCKINFO, the first stream can still be analyzed and dumped.
As part of this commit, BitstreamReader gets a move constructor and move
assignment operator, as well as a takeBlockInfo method.
llvm-svn: 216826
MachOObjectFile in lib/Object currently has no support for parsing the rebase,
binding, and export information from the LC_DYLD_INFO load command in final
linked mach-o images. This patch adds support for parsing the exports trie data
structure. It also adds an option to llvm-objdump to dump that export info.
I did the exports parsing first because it is the hardest. The information is
encoded in a trie structure, but the standard ObjectFile way to inspect content
is through iterators. So I needed to make an iterator that would do a
non-recursive walk through the trie and maintain the concatenation of edges
needed for the current string prefix.
I plan to add similar support in MachOObjectFile and llvm-objdump to
parse/display the rebasing and binding info too.
llvm-svn: 216808
specifier and change the default behavior to only emit the
DW_AT_accessibility(public) attribute when the isPublic() is explicitly
set.
rdar://problem/18154959
llvm-svn: 216799
Summary:
If a variadic function body contains a musttail call, then we copy all
of the remaining register parameters into virtual registers in the
function prologue. We track the virtual registers through the function
body, and add them as additional registers to pass to the call. Because
this is all done in virtual registers, the register allocator usually
gives us good code. If the function does a call, however, it will have
to spill and reload all argument registers (ew).
Forwarding regparms on x86_32 is not implemented because most compilers
don't support varargs in 32-bit with regparms.
Reviewers: majnemer
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5060
llvm-svn: 216780
Summary:
Instead of specifying the alignment as metadata which may be destroyed by
transformation passes, make the alignment the second argument to ldu/ldg
intrinsic calls.
Test Plan:
ldu-ldg.ll
ldu-i8.ll
ldu-reg-plus-offset.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: meheff, jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D5093
llvm-svn: 216731
The included test case would fail, because the MI PHI node would have two
operands from the same predecessor.
This problem occurs when a switch instruction couldn't be selected. This happens
always, because there is no default switch support for FastISel to begin with.
The problem was that FastISel would first add the operand to the PHI nodes and
then fall-back to SelectionDAG, which would then in turn add the same operands
to the PHI nodes again.
This fix removes these duplicate PHI node operands by reseting the
PHINodesToUpdate to its original state before FastISel tried to select the
instruction.
This fixes <rdar://problem/18155224>.
llvm-svn: 216640
Currently instructions are folded very aggressively for AArch64 into the memory
operation, which can lead to the use of killed operands:
%vreg1<def> = ADDXri %vreg0<kill>, 2
%vreg2<def> = LDRBBui %vreg0, 2
... = ... %vreg1 ...
This usually happens when the result is also used by another non-memory
instruction in the same basic block, or any instruction in another basic block.
This fix teaches hasTrivialKill to not only check the LLVM IR that the value has
a single use, but also to check if the register that represents that value has
already been used. This can happen when the instruction with the use was folded
into another instruction (in this particular case a load instruction).
This fixes rdar://problem/18142857.
llvm-svn: 216634
Summary:
Introduce support::ulittleX_t::ref type to Support/Endian.h and use it in x86 JIT
to enforce correct endianness and fix unaligned accesses.
Test Plan: regression test suite
Reviewers: lhames
Subscribers: ributzka, llvm-commits
Differential Revision: http://reviews.llvm.org/D5011
llvm-svn: 216631
This patch allows invalid DynamicLibrary instances to be
constructed, and fixes the const-correctness of the isValid()
method.
No functional change.
llvm-svn: 216571
This teaches the AArch64 backend to deal with the operations required
to deal with the operations on v4f16 and v8f16 which are exposed by
NEON intrinsics, plus the add, sub, mul and div operations.
llvm-svn: 216555
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
llvm-svn: 216488
consider:
long long *f(long long *b, long long *e) {
return b + (e - b);
}
we would lower this to something like:
define i64* @f(i64* %b, i64* %e) {
%1 = ptrtoint i64* %e to i64
%2 = ptrtoint i64* %b to i64
%3 = sub i64 %1, %2
%4 = ashr exact i64 %3, 3
%5 = getelementptr inbounds i64* %b, i64 %4
ret i64* %5
}
This should fold away to just 'e'.
N.B. This adds m_SpecificInt as a convenient way to match against a
particular 64-bit integer when using LLVM's match interface.
llvm-svn: 216439
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
llvm-svn: 216393
This patch adds support to recognize division by uniform power of 2 and modifies the cost table to vectorize division by uniform power of 2 whenever possible.
Updates Cost model for Loop and SLP Vectorizer.The cost table is currently only updated for X86 backend.
Thanks to Hal, Andrea, Sanjay for the review. (http://reviews.llvm.org/D4971)
llvm-svn: 216371
This was added in r134994, to fix a memory leak;
three days later, r135248 switched
ContainedTys from being new-allocated to being allocated
via BumpPtrAllocator, and the earlier fix was never
reverted.
The destructor doesn't seem to ever actually be called
on Types anyway, so it's harmless, but if it were,
this'd be an invalid pointer.
This reverts r134994.
llvm-svn: 216354
This does nothing but remove the Record from the map, and
then re-add it, without actually changing it in between.
The Record's Name used to be changed before re-adding it
when the code was first committed in r137232, but the
name-changing lines were removed in r142510, and since
then this code seems to do nothing.
This was also the only caller of removeClass or removeDef,
so now RecordKeeper owns its Records unconditionally,
and could be unique_ptr-ified.
llvm-svn: 216349
Based on the STL class of the same name, it guards a mutex
while also allowing it to be unlocked conditionally before
destruction.
This eliminates the last naked usages of mutexes in LLVM and
clang.
It also uncovered and fixed a bug in callExternalFunction()
when compiled without USE_LIBFFI, where the mutex would never
be unlocked if the end of the function was reached.
llvm-svn: 216338
There's no need to do this if the user doesn't call va_start. In the
future, we're going to have thunks that forward these register
parameters with musttail calls, and they won't need these spills for
handling va_start.
Most of the test suite changes are adding va_start calls to existing
tests to keep things working.
llvm-svn: 216294
This patch contains the LLVM side of the fix of PR17239.
This bug that happens because the /link (clang-cl.exe argument) is
marked as "consume all remaining arguments". However, when inside a
response file, /link should only consume all remaining arguments inside
the response file where it is located, not the entire command line after
expansion.
My patch will change the semantics of the RemainingArgsClass kind to
always consume only until the end of the response file when the option
originally came from a response file. There are only two options in this
class: dash dash (--) and /link.
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4899
Patch by Rafael Auler!
llvm-svn: 216280
This (mostly) reverts commit r216119.
Somewhere during the review Reid committed r214980 which fixed this
another way, and I neglected to check that the testcase still failed
before committing.
I've left test/CodeGen/X86/aligned-variadic.ll around in case it adds
extra coverage.
llvm-svn: 216246
Somewhat unnoticed in the original implementation of discriminators, but
it could cause instructions to end up in new, small,
DW_TAG_lexical_blocks due to the use of DILexicalBlock to track
discriminator changes.
Instead, use DILexicalBlockFile which we already use to track file
changes without introducing new scopes, so it works well to track
discriminator changes in the same way.
llvm-svn: 216239
isPow2DivCheap
That name doesn't specify signed or unsigned.
Lazy as I am, I eventually read the function and variable comments. It turns out that this is strictly about signed div. But I discovered that the comments are wrong:
srl/add/sra
is not the general sequence for signed integer division by power-of-2. We need one more 'sra':
sra/srl/add/sra
That's the sequence produced in DAGCombiner. The first 'sra' may be removed when dividing by exactly '2', but that's a special case.
This patch corrects the comments, changes the name of the flag bit, and changes the name of the accessor methods.
No functional change intended.
Differential Revision: http://reviews.llvm.org/D5010
llvm-svn: 216237
AtomicExpandLoadLinked is currently rather ARM-specific. This patch is the first of
a group that aim at making it more target-independent. See
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-August/075873.html
for details
The command line option is "atomic-expand"
llvm-svn: 216231
The profile data format was recently updated and the new indexing api
requires the code coverage tool to know the function's hash as well
as the function's name to get the execution counts for a function.
Differential Revision: http://reviews.llvm.org/D4994
llvm-svn: 216207
In both Clang and LLVM, this is a common pattern:
Size = sizeof(DeclRefExpr) + SomeExtraStuff;
void *Mem = Context.Allocate(Size, llvm::alignOf<DeclRefExpr>());
return new (Mem) DeclRefExpr(...);
The annoying thing is that because the default placement-new operator has a
nothrow specification, the compiler will insert a null check of Mem before
calling the DeclRefExpr constructor. This null check is redundant for us,
because we expect the allocation functions to never return null.
By annotating the allocator functions with returns_nonnull, we can optimize
away these checks. Compiling clang with a recent version of Clang and measuring
with:
$ perf stat -r20 bin/clang.patch -fsyntax-only -w gcc.c && perf stat -r20 bin/clang.orig -fsyntax-only -w gcc.c
Shows a 2.4% speed-up (+- 0.8%).
The pattern occurs in LLVM too. Measuring with -O3 (and now using bzip2.c
instead, because it's smaller):
$ perf stat -r20 bin/clang.patch -O3 -w bzip2.c && perf stat -r20 bin/clang.orig -O3 -w bzip2.c
Shows 4.4 % speed-up (+- 1%).
If anyone knows of a similar attribute we can use for MSVC, or some other
technique to get rid off the null check there, please let me know.
Differential Revision: http://reviews.llvm.org/D4989
llvm-svn: 216192
This patch adds a new property: isInsertSubreg and the related target hooks:
TargetIntrInfo::getInsertSubregInputs and
TargetInstrInfo::getInsertSubregLikeInputs to specify that a target specific
instruction is a (kind of) INSERT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216139
This patch adds a new property: isExtractSubreg and the related target hooks:
TargetIntrInfo::getExtractSubregInputs and
TargetInstrInfo::getExtractSubregLikeInputs to specify that a target specific
instruction is a (kind of) EXTRACT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216130
Store TargetSelectionDAGInfo as a pointer instead of a reference:
getSelectionDAGInfo() may not be implemented for certain backends
(e.g. it's not currently implemented for R600).
This bug is reported by UBSan.
llvm-svn: 216129
The goal of the patch is to implement section 3.2.3 of the AMD64 ABI
correctly. The controlling sentence is, "The size of each argument gets
rounded up to eightbytes. Therefore the stack will always be eightbyte
aligned." The equivalent sentence in the i386 ABI page 37 says, "At all
times, the stack pointer should point to a word-aligned area." For both
architectures, the stack pointer is not being rounded up to the nearest
eightbyte or word between the last normal argument and the first
variadic argument.
Patch by Thomas Jablin!
llvm-svn: 216119
Both MachineLoopInfo and MachineDominatorTree may be null in ScheduleDAGMI
constructor call. It is undefined behavior to take references to these values.
This bug is reported by UBSan.
llvm-svn: 216118
I added wrapping to the CFGPrinter a while back so the -view-cfg
output is actually viewable. I've since enountered very long mangled
names with the same problem, so I'm slightly tweaking this code to
work in that case.
llvm-svn: 216087
In r216015 I missed propagating `OnlyIfReduced` through the inline
versions of `getGetElementPtr()` (I was relying on compile failures on
mismatches between the header and source signatures to get them all).
llvm-svn: 216023
Change `ConstantExpr` to follow the model the other constants are using:
only malloc a replacement if it's going to be used. This fixes a subtle
bug where if an API user had used `ConstantExpr::get()` already to
create the replacement but hadn't given it any users, we'd delete the
replacement.
This relies on r216015 to thread `OnlyIfReduced` through
`ConstantExpr::getWithOperands()`.
llvm-svn: 216016
In order to change `ConstantExpr::replaceUsesOfWithOnConstant()` to work
like other constants (e.g., using `ConstantArray::getImpl()`), thread
`OnlyIfReduced` through as necessary. When `OnlyIfReduced` is false,
there's no functionality change. When it's true, if there's no constant
folding or type changes `nullptr` is returned instead of the new
constant.
`ConstantExpr::replaceUsesOfWithOnConstant()` will be updated to use the
"true" version in a follow-up commit.
llvm-svn: 216015
Note: This was originally reverted to track down a buildbot error. This commit
exposed a latent bug that was fixed in r215753. Therefore it is reapplied
without any modifications.
I run it through SPEC2k and SPEC2k6 for AArch64 and it didn't introduce any new
regeressions.
Original commit message:
This changes the order in which FastISel tries to materialize a constant.
Originally it would try to use a simple target-independent approach, which
can lead to the generation of inefficient code.
On X86 this would result in the use of movabsq to materialize any 64bit
integer constant - even for simple and small values such as 0 and 1. Also
some very funny floating-point materialization could be observed too.
On AArch64 it would materialize the constant 0 in a register even the
architecture has an actual "zero" register.
On ARM it would generate unnecessary mov instructions or not use mvn.
This change simply changes the order and always asks the target first if it
likes to materialize the constant. This doesn't fix all the issues
mentioned above, but it enables the targets to implement such
optimizations.
Related to <rdar://problem/17420988>.
llvm-svn: 216006
Owning the buffer is somewhat inflexible. Some Binaries have sub Binaries
(like Archive) and we had to create dummy buffers just to handle that. It is
also a bad fit for IRObjectFile where the Module wants to own the buffer too.
Keeping this ownership would make supporting IR inside native objects
particularly painful.
This patch focuses in lib/Object. If something elsewhere used to own an Binary,
now it also owns a MemoryBuffer.
This patch introduces a few new types.
* MemoryBufferRef. This is just a pair of StringRefs for the data and name.
This is to MemoryBuffer as StringRef is to std::string.
* OwningBinary. A combination of Binary and a MemoryBuffer. This is needed
for convenience functions that take a filename and return both the
buffer and the Binary using that buffer.
The C api now uses OwningBinary to avoid any change in semantics. I will start
a new thread to see if we want to change it and how.
llvm-svn: 216002
* Use StringRef instead of std::string&
* Return a std::unique_ptr<Module> instead of taking an optional module to write
to (was not really used).
* Use current comment style.
* Use current naming convention.
llvm-svn: 215989
This reverts commit r215981, which reverted the above commits because
MSVC std::equal asserts on nullptr iterators, and thes commits
introduced an `ArrayRef::equals()` on empty ArrayRefs.
ArrayRef was changed not to use std::equal in r215986.
llvm-svn: 215987
MSVC's STL has a bug in `std::equal()`: it asserts on nullptr iterators,
causing a block revert in r215981. This works around that by re-writing
`ArrayRef::equals()` to do the work itself.
llvm-svn: 215986
Introduce `getImpl()` that tries the simplification logic from `get()`
and then gives up. This allows the logic to be reused elsewhere in a
follow-up commit.
llvm-svn: 215963
Avoid RAUW-ing `ConstantExpr` when an operand changes unless the new
`ConstantExpr` already has users. This prevents the RAUW from rippling
up the expression tree unnecessarily.
This commit indirectly adds test coverage for r215953 (this is how I
came across the bug).
This is part of PR20515.
llvm-svn: 215960
Rewrite `ConstantUniqueMap` to be more similar to
`ConstantAggrUniqueMap`.
- Use a `DenseMap` with custom MapInfo instead of a `std::map` with
linear lookups and deletion.
- Don't waste memory explicitly storing (heavyweight) keys.
Only `ConstantExpr` and `InlineAsm` actually use this data structure, so
I also updated them to use it.
This code cleanup is a precursor to reducing RAUW traffic on
`ConstantExpr` -- I felt badly adding a new (linear) call to
`ConstantUniqueMap::FindExistingKey`, so this designs away the concern.
A follow-up commit will transition the users of `ConstantAggrUniqueMap`
over.
llvm-svn: 215957
file with -macho, the Mach-O specific object file parser option.
After some discussion I chose to do this implementation contained in the logic
of llvm-objdump’s MachODump.cpp using a second disassembler for thumb when
needed and with updates mostly contained in the MachOObjectFile class.
llvm-svn: 215931
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
llvm-svn: 215887
We already handle the no-slabs case when checking whether the current slab
is large enough: if no slabs have been allocated, CurPtr and End are both 0.
alignPtr(0), will still be 0, and so "if (Ptr + Size <= End)" fails.
Differential Revision: http://reviews.llvm.org/D4943
llvm-svn: 215841
While *most* (X sdiv 1) operations will get caught by InstSimplify, it
is still possible for a sdiv to appear in the worklist which hasn't been
simplified yet.
This means that it is possible for 0 - (X sdiv 1) to get transformed
into (X sdiv -1); dividing by -1 can make the transform produce undef
values instead of the proper result.
Sorry for the lack of testcase, it's a bit problematic because it relies
on the exact order of operations in the worklist.
llvm-svn: 215818
We used to assume that any fixed-offset stack object was not aliased. This
meant that no IR value could point to the memory contained in such an object.
This is a reasonable default, but is not a universally-correct
target-independent fact. For example, on PowerPC (both Darwin and non-Darwin),
some byval arguments are allocated at fixed offsets by the ABI. These, however,
certainly can be pointed to by IR values. This change moves the 'isAliased'
logic out of FixedStackPseudoSourceValue and into MFI, and allows the isAliased
property to be overridden for fixed-offset objects.
This will be used by an upcoming commit to the PowerPC backend to fix PR20280.
No functionality change intended (the behavior of
FixedStackPseudoSourceValue::isAliased has been made more conservative for
callers that don't pass an MFI object, but I don't see any in-tree callers that
do that).
llvm-svn: 215794
This reverts commit r215784 / 3f8a26f6fe16cc76c98ab21db2c600bd7defbbaa.
LLD has 3 StringSaver's, one of which takes a lock when saving the
string... Need to investigate more closely.
llvm-svn: 215790
This class is generally useful.
In breaking it out, the primary change is that it has been made
non-virtual. It seems like being abstract led to there being 3 different
(2 in llvm + 1 in clang) concrete implementations which disagreed about
the ownership of the saved strings (see the manual call to free() in the
unittest StrDupSaver; yes this is different from the CommandLine.cpp
StrDupSaver which owns the stored strings; which is different from
Clang's StringSetSaver which just holds a reference to a
std::set<std::string> which owns the strings).
I've identified 2 other places in the
codebase that are open-coding this pattern:
memcpy(Alloc.Allocate<char>(strlen(S)+1), S, strlen(S)+1)
I'll be switching them over. They are
* llvm::sys::Process::GetArgumentVector
* The StringAllocator member of YAMLIO's Input class
This also will allow simplifying Clang's driver.cpp quite a bit.
Let me know if there are any other places that could benefit from
StringSaver. I'm also thinking of adding a saveStringRef member for
getting a stable StringRef.
llvm-svn: 215784
This reverts:
r215595 "[FastISel][X86] Add large code model support for materializing floating-point constants."
r215594 "[FastISel][X86] Use XOR to materialize the "0" value."
r215593 "[FastISel][X86] Emit more efficient instructions for integer constant materialization."
r215591 "[FastISel][AArch64] Make use of the zero register when possible."
r215588 "[FastISel] Let the target decide first if it wants to materialize a constant."
r215582 "[FastISel][AArch64] Cleanup constant materialization code. NFCI."
llvm-svn: 215673
As X86MCAsmInfoDarwin uses '##' as CommentString although a single '#' starts a
comment a workaround for this special case is added.
Fixes divisions in constant expressions for the AArch64 assembler and other
targets which use '//' as CommentString.
Patch by Janne Grunau!
llvm-svn: 215615
This changes the order in which FastISel tries to materialize a constant.
Originally it would try to use a simple target-independent approach, which
can lead to the generation of inefficient code.
On X86 this would result in the use of movabsq to materialize any 64bit
integer constant - even for simple and small values such as 0 and 1. Also
some very funny floating-point materialization could be observed too.
On AArch64 it would materialize the constant 0 in a register even the
architecture has an actual "zero" register.
On ARM it would generate unnecessary mov instructions or not use mvn.
This change simply changes the order and always asks the target first if it
likes to materialize the constant. This doesn't fix all the issues
mentioned above, but it enables the targets to implement such
optimizations.
Related to <rdar://problem/17420988>.
llvm-svn: 215588
New function to erase a machine instruction and mark DBG_VALUE
for removal. A DBG_VALUE is marked for removal when it references
an operand defined in the instruction.
Use the new function to cleanup code in dead machine instruction
removal pass.
llvm-svn: 215580
critical edge has been split. The MachineDominatorTree will when lazy update the
underlying dominance properties when require.
** Context **
This is a follow-up of r215410.
Each time a critical edge is split this invalidates the dominator tree
information. Thus, subsequent queries of that interface will be slow until the
underlying information is actually recomputed (costly).
** Problem **
Prior to this patch, splitting a critical edge needed to query the dominator
tree to update the dominator information.
Therefore, splitting a bunch of critical edges will likely produce poor
performance as each query to the dominator tree will use the slow query path.
This happens a lot in passes like MachineSink and PHIElimination.
** Proposed Solution **
Splitting a critical edge is a local modification of the CFG. Moreover, as soon
as a critical edge is split, it is not critical anymore and thus cannot be a
candidate for critical edge splitting anymore. In other words, the predecessor
and successor of a basic block inserted on a critical edge cannot be inserted by
critical edge splitting.
Using these observations, we can pile up the splitting of critical edge and
apply then at once before updating the DT information.
The core of this patch moves the update of the MachineDominatorTree information
from MachineBasicBlock::SplitCriticalEdge to a lazy MachineDominatorTree.
** Performance **
Thanks to this patch, the motivating example compiles in 4- minutes instead of
6+ minutes. No test case added as the motivating example as nothing special but
being huge!
The binaries are strictly identical for all the llvm test-suite + SPECs with and
without this patch for both Os and O3.
Regarding compile time, I observed only noise, although on average I saw a
small improvement.
<rdar://problem/17894619>
llvm-svn: 215576
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
Added avx512_movnt_vl multiclass for handling 256/128-bit forms of instruction.
Added encoding and lowering tests.
Reviewed by Elena Demikhovsky <elena.demikhovsky@intel.com>
llvm-svn: 215536
This implements PPCTargetLowering::getTgtMemIntrinsic for Altivec load/store
intrinsics. As with the construction of the MachineMemOperands for the
intrinsic calls used for unaligned load/store lowering, the only slight
complication is that we need to represent a larger memory range than the
loaded/stored value-type size (because the address is rounded down to an
aligned address, and we need to conservatively represent the entire possible
range of the actual access). This required adding an extra size field to
TargetLowering::IntrinsicInfo, and this was done in a way that required no
modifications to other targets (the size defaults to the store size of the
provided memory data type).
This fixes test/CodeGen/PowerPC/unal-altivec-wint.ll (so it can be un-XFAILed).
llvm-svn: 215512
Unfortunately, our use of the SDNode class hierarchy for INTRINSIC_W_CHAIN and
INTRINSIC_VOID nodes is somewhat broken right now. These nodes sometimes are
used for memory intrinsics (those with MachineMemOperands), and sometimes not.
When not, the nodes are not created as instances of MemIntrinsicSDNode, but
rather created as some other subclass of SDNode using DAG::getNode. When they
are memory intrinsics, they are created using DAG::getMemIntrinsicNode as
instances of MemIntrinsicSDNode. MemIntrinsicSDNode is a subclass of
MemSDNode, but prior to r214452, we had a non-self-consistent setup whereby
MemIntrinsicSDNode::classof on INTRINSIC_W_CHAIN and INTRINSIC_VOID would
return true but MemSDNode::classof on INTRINSIC_W_CHAIN and INTRINSIC_VOID
would return false. In r214452, MemSDNode::classof was changed to return true
for INTRINSIC_W_CHAIN and INTRINSIC_VOID, which is now self-consistent. The
problem is that neither the pre-r214452 logic and the post-r214452 logic are
really right. The truth is that not all INTRINSIC_W_CHAIN and INTRINSIC_VOID
nodes are instances of MemIntrinsicSDNode (or MemSDNode for that matter), and
the return value from classof needs to reflect that. This was broken before
r214452 (because MemIntrinsicSDNode::classof always returned true), and was
broken afterward (because MemSDNode::classof also always returned true), and
will now be correct.
The minimal solution is to grab one of the SubclassData bits (there is one left
for MemIntrinsicSDNode nodes) and use it to store whether or not a particular
INTRINSIC_W_CHAIN or INTRINSIC_VOID is really an instance of
MemIntrinsicSDNode or not. Doing this allows both MemIntrinsicSDNode::classof
and MemSDNode::classof to return the correct answer for the underlying object
for both the memory-intrinsic and non-memory-intrinsic cases.
This fixes the problem that r214452 created in the SelectionDAGDumper (thanks
to Matt Arsenault for pointing it out).
Because PowerPC does not implement getTgtMemIntrinsic, this change breaks
test/CodeGen/PowerPC/unal-altivec-wint.ll. I've XFAILed it for now, and will
fix it in a follow-up commit.
llvm-svn: 215511
It's not clear what the semantics of a self-move should be. The
consensus appears to be that a self-move should leave the object in a
moved-from state, which is what our existing move assignment operator
does.
However, the MSVC 2013 STL will perform self-moves in some cases. In
particular, when doing a std::stable_sort of an already sorted APSInt
vector of an appropriate size, one of the merge steps will self-move
half of the elements.
We don't notice this when building with MSVC, because MSVC will not
synthesize the move assignment operator for APSInt. Presumably MSVC
does this because APInt, the base class, has user-declared special
members that implicitly delete move special members. Instead, MSVC
selects the copy-assign operator, which defends against self-assignment.
Clang, on the other hand, selects the move-assign operator, and we get
garbage APInts.
llvm-svn: 215478
No functional change. To be used in future commits that need to look
for such instructions.
Reviewed By: rafael
Differential Revision: http://reviews.llvm.org/D4504
llvm-svn: 215413
This patch adds a new property: isRegSequence and the related target hooks:
TargetIntrInfo::getRegSequenceInputs and
TargetInstrInfo::getRegSequenceLikeInputs to specify that a target specific
instruction is a (kind of) REG_SEQUENCE.
<rdar://problem/12702965>
llvm-svn: 215394
Remove the MinGW32 and Cygwin types from the OSType enumeration. These values
are represented via environments of Windows. It is a source of confusion and
needlessly clutters the code. The cost of doing this is that we must sink the
check for them into the normalization code path along with the spelling.
Addresses PR20592.
llvm-svn: 215303
Kaelyn Takata