This change modifies fatal signal handler used in LLVM tools.
Now it attempts to find llvm-symbolizer binary and communicates
with it in order to turn instruction addresses into
function/file/line info entries. This should significantly improve
stack traces readability in Debug builds.
This feature only works on selected platforms (including Darwin
and Linux). If the symbolization fails for some reason, signal
handler will fallback to the original behavior.
Reviewed in http://reviews.llvm.org/D5610
llvm-svn: 219354
One of many steps to generalize subprogram emission to both the DWO and
non-DWO sections (to emit -gmlt-like data under fission). Once the
functions are pushed down into DwarfCompileUnit some of the data
structures will be pushed at least into DwarfFile so that they can be
unique per-file, allowing emission to both files independently.
llvm-svn: 219345
There are two methods in SectionRef that can fail:
* getName: The index into the string table can be invalid.
* getContents: The section might point to invalid contents.
Every other method will always succeed and returning and std::error_code just
complicates the code. For example, a section can have an invalid alignment,
but if we are able to get to the section structure at all and create a
SectionRef, we will always be able to read that invalid alignment.
llvm-svn: 219314
Summary:
We currently emit an DW_AT_APPLE_property_attribute with a value that is a
bitfield describing the various attributes applied to an ObjectiveC property.
While trying to add testing to one of my dwarfdump patches that would pretty
print that, I realized this information looks totally broken and has maybe
never been correct.
As with every DWARF info, we have some enum in Dwarf.h that describes this
attribute (enum ApplePropertyAttributes). It seems however that the attribute
value is set from another definition of these flags in Sema/DeclSpec.h (enum
ObjCPropertyAttributeKind). And these 2 enums aren't in sync.
This patch updates the Dwarf.h values to the ones we are (and have been for
a very long time) emitting. We change some publicly (and even documented
in SourceLevelDebugging.rst) values, but I doubt this could be an issue as
the information has been wrong for so long...
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5653
llvm-svn: 219311
mach-o supports "fat" files which are a header/table-of-contents followed by a
concatenation of mach-o files built for different architectures. Currently,
MemoryBuffer has no easy way to map a subrange (slice) of a file which lld
will need to select a mach-o slice of a fat file. The new function provides
an easy way to map a slice of a file into a MemoryBuffer. Test case included.
llvm-svn: 219260
getOpenFileSlice gets passed the map size, so it makes no sense to say that
the size is volatile. The code will not even compute the size.
llvm-svn: 219226
On this file we had a mix of
* Twine
* const char *
* StringRef
The two that make sense are
* const Twine & (caller convenience)
* consc char * (that is what will eventually be passed to open.
Given that sys::fs::openFileForRead takes a "const Twine &", I picked that.
llvm-svn: 219224
Most Unix-like operating systems guarantee that the file descriptor is
closed after a call to close(2), even if close comes back with EINTR.
For these systems, calling close _again_ will either do nothing or close
some other file descriptor open(2)'d by another thread. (Linux)
However, some operating systems do not have this behavior. They require
at least another call to close(2) before guaranteeing that the
descriptor is closed. (HP-UX)
And some operating systems have an unpredictable blend of the two
behaviors! (xnu)
Avoid this disaster by blocking all signals before we call close(2).
This ensures that a signal will not be delivered to the thread and
close(2) will not give us back EINTR. We restore the signal mask once
the operation is done.
N.B. This isn't a problem on Windows, it doesn't have a notion of EINTR
because signals always get delivered to dedicated signal handling
threads.
llvm-svn: 219189
It's possible to start a program with one (or all) of the standard file
descriptors closed. Subsequent open system calls will give the program
a low-numbered file descriptor.
This is problematic because we may believe we are writing to standard
out instead of a file.
Introduce Process::FixupStandardFileDescriptors, a helper function to
remap standard file descriptors to /dev/null if they were closed before
the program started.
llvm-svn: 219170
The patch's author points out that, despite the function's documentation,
getSetCCResultType is only used to get the SETCC result type (with one
here-removed problematic exception). In one case, getSetCCResultType was being
used to get the predicate type to use for a SELECT node, and then
SIGN_EXTENDing (or truncating) to get the input predicate to match that type.
Unfortunately, this was happening inside visitSIGN_EXTEND, and creating new
SIGN_EXTEND nodes was causing an infinite loop. In addition, this behavior was
wrong if a target was not using ZeroOrNegativeOneBooleanContent. Lastly, the
extension/truncation seems unnecessary here: SELECT is defined as:
Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not i1
then the high bits must conform to getBooleanContents.
So here we remove this use of getSetCCResultType and update
getSetCCResultType's documentation to reflect its actual uses.
Patch by deadal nix!
llvm-svn: 219141
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 219110
group's interface to all of the implementations of that analysis group.
The groups themselves can and do manage this anyways, the pass registry
needn't involve itself.
llvm-svn: 219097
pass registry.
This style of registry is somewhat questionable, but it being
non-monotonic is crazy. No one is (or should be) unloading DSOs with
passes and unregistering them here. I've checked with a few folks and
I don't know of anyone using this functionality or any important use
case where it is necessary.
llvm-svn: 219096
Fix http://llvm.org/PR21158 by adding a cast to unsigned long long,
so the comparison would be between two unsigned long longs instead
of bool and unsigned long long.
if (getAsUnsignedInteger(*this, Radix, ULLVal) ||
static_cast<unsigned long long>(static_cast<T>(ULLVal)) != ULLVal)
llvm-svn: 219065
C++14 adds new builtin signatures for 'operator delete'. This change allows
new/delete pairs to be removed in C++14 onwards, as they were in C++11 and
before.
llvm-svn: 219014
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
In the X86 backend, matching an address is initiated by the 'addr' complex
pattern and its friends. During this process we may reassociate and-of-shift
into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the
shift into the scale of the address.
However as demonstrated by the testcase, this can trigger CSE of not only the
shift and the AND which the code is prepared for but also the underlying load
node. In the testcase this node is sitting in the RecordedNode and MatchScope
data structures of the matcher and becomes a deleted node upon CSE. Returning
from the complex pattern function, we try to access it again hitting an assert
because the node is no longer a load even though this was checked before.
Now obviously changing the DAG this late is bending the rules but I think it
makes sense somewhat. Outside of addresses we prefer and-of-shift because it
may lead to smaller immediates (FoldMaskAndShiftToScale is an even better
example because it create a non-canonical node). We currently don't recognize
addresses during DAGCombiner where arguably this canonicalization should be
performed. On the other hand, having this in the matcher allows us to cover
all the cases where an address can be used in an instruction.
I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for
the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible
for initiating the recursive CSE on users
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it
is not strictly necessary since the shift is hooked into the visited user. Of
course it's safer to keep the DAG consistent at all times (e.g. for accurate
number of uses, etc.).
So rather than changing the fundamentals, I've decided to continue along the
previous patches and detect the CSE. This patch installs a very targeted
DAGUpdateListener for the duration of a complex-pattern match and updates the
matching state accordingly. (Previous patches used HandleSDNode to detect the
CSE but that's not practical here). The listener is only installed on X86.
I tested that there is no measurable overhead due to this while running
through the spec2k BC files with llc. The only thing we pay for is the
creation of the listener. The callback never ever triggers in spec2k since
this is a corner case.
Fixes rdar://problem/18206171
llvm-svn: 219009
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
llvm-svn: 218989
That commit was introduced in order to help investigate a problem in ARM
codegen breaking from commit 202304 (Add a limit to the heuristic that register
allocates instructions in local order). Recent analisys indicated that the
problem no longer exists, so I'm reverting this change.
See PR18996.
llvm-svn: 218981
This patch defines a new iterator for the imported symbols.
Make a change to COFFDumper to use that iterator to print
out imported symbols and its ordinals.
llvm-svn: 218915
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
Every time we were adding or removing an expression when generating a
coverage mapping we were doing a linear search to try and deduplicate
the list. The indices in the list are important, so we can't just
replace it by a DenseMap entirely, but an auxilliary DenseMap for fast
lookup massively improves the performance issues I was seeing here.
llvm-svn: 218892
When the flag is given, the command prints out the COFF import table.
Currently only the import table directory will be printed.
I'm going to make another patch to print out the imported symbols.
The implementation of import directory entry iterator in
COFFObjectFile.cpp was buggy. This patch fixes that too.
http://reviews.llvm.org/D5569
llvm-svn: 218891
When I was preparing r218879 for commit, I removed an early return
that I decided was just noise. It wasn't. This is r218879 no-crash
edition.
This reverts commit r218881, reapplying r218879.
llvm-svn: 218887
The Terms vector here represented a polynomial of of all possible
counters, and is used to simplify expressions when generating coverage
mapping. There are a few problems with this:
1. Keeping the vector as a member is wasteful, since we clear it every
time we use it.
2. Most expressions refer to a subset of the counters, so we end up
iterating over a large number of zeros doing nothing a lot of the
time.
This updates the user of the vector to store the terms locally, and
uses a sort and combine approach so that we only operate on counters
that are actually used in a given expression. For small cases this
makes very little difference, but in cases with a very large number of
counted regions this is a significant performance fix.
llvm-svn: 218879
in the future to attach useful information about the PBQP graph (e.g. the
associated MachineFunction, pointers to regalloc passes) to the graph itself,
making that information accessible to the solver. This should also allow the
PBQPBuilder interface to be simplified.
llvm-svn: 218848
This reverts commit r218820. It turns out that Adrian has an
outstanding SROA patch that uses this.
I've updated it to forward to `createExpression()`.
llvm-svn: 218828
I neglected to update `DIBuilder::createPieceExpression()` in r218797,
which I noticed while rebasing a patch for PR17891. On closer
inspection, it looks like dead code.
If there are any downstream users of this, you should transition to the
more general `createExpression()`. Or, we can add this back, but then
it should just forward to `createExpression()`.
llvm-svn: 218820
`DIExpression`'s elements are 64-bit integers that are stored as
`ConstantInt`. The accessors already encapsulate the storage. This
commit updates the `DIBuilder` API to also encapsulate that.
llvm-svn: 218797
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
r206400 and r209442 added remarks that are disabled by default.
However, if a diagnostic handler is registered, the remarks are sent
unfiltered to the handler. This is the right behaviour for clang, since
it has its own filters.
However, the diagnostic handler exposed in the LTO API receives only the
severity and message. It doesn't have the information to filter by pass
name. For LTO, disabled remarks should be filtered by the producer.
I've changed `LLVMContext::setDiagnosticHandler()` to take a `bool`
argument indicating whether to respect the built-in filters. This
defaults to `false`, so other consumers don't have a behaviour change,
but `LTOCodeGenerator::setDiagnosticHandler()` sets it to `true`.
To make this behaviour testable, I added a `-use-diagnostic-handler`
command-line option to `llvm-lto`.
This fixes PR21108.
llvm-svn: 218784
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
member of RTDyldMemoryManager (and rename to getSymbolAddressInProcess).
The functionality this provides is very specific to RTDyldMemoryManager, so it
makes sense to keep it in that class to avoid accidental re-use.
No functional change.
llvm-svn: 218741
This can be used for in-place initialization of non-moveable types.
For compilers that don't support variadic templates, only up to four
arguments are supported. We can always add more, of course, but this
should be good enough until we move to a later MSVC that has full
support for variadic templates.
Inspired by std::experimental::optional from the "Library Fundamentals" C++ TS.
Reviewed by David Blaikie.
llvm-svn: 218732
Summary:
This patch adds a threshold that controls the number of bonus instructions
allowed for folding branches with common destination. The original code allows
at most one bonus instruction. With this patch, users can customize the
threshold to allow multiple bonus instructions. The default threshold is still
1, so that the code behaves the same as before when users do not specify this
threshold.
The motivation of this change is that tuning this threshold significantly (up
to 25%) improves the performance of some CUDA programs in our internal code
base. In general, branch instructions are very expensive for GPU programs.
Therefore, it is sometimes worth trading more arithmetic computation for a more
straightened control flow. Here's a reduced example:
__global__ void foo(int a, int b, int c, int d, int e, int n,
const int *input, int *output) {
int sum = 0;
for (int i = 0; i < n; ++i)
sum += (((i ^ a) > b) && (((i | c ) ^ d) > e)) ? 0 : input[i];
*output = sum;
}
The select statement in the loop body translates to two branch instructions "if
((i ^ a) > b)" and "if (((i | c) ^ d) > e)" which share a common destination.
With the default threshold, SimplifyCFG is unable to fold them, because
computing the condition of the second branch "(i | c) ^ d > e" requires two
bonus instructions. With the threshold increased, SimplifyCFG can fold the two
branches so that the loop body contains only one branch, making the code
conceptually look like:
sum += (((i ^ a) > b) & (((i | c ) ^ d) > e)) ? 0 : input[i];
Increasing the threshold significantly improves the performance of this
particular example. In the configuration where both conditions are guaranteed
to be true, increasing the threshold from 1 to 2 improves the performance by
18.24%. Even in the configuration where the first condition is false and the
second condition is true, which favors shortcuts, increasing the threshold from
1 to 2 still improves the performance by 4.35%.
We are still looking for a good threshold and maybe a better cost model than
just counting the number of bonus instructions. However, according to the above
numbers, we think it is at least worth adding a threshold to enable more
experiments and tuning. Let me know what you think. Thanks!
Test Plan: Added one test case to check the threshold is in effect
Reviewers: nadav, eliben, meheff, resistor, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D5529
llvm-svn: 218711
It was hacky to use an opcode as a switch because it won't always match
(rsqrte != sqrte), and it looks like we'll need to add more special casing
per arch than I had hoped for. Eg, x86 will prefer a different NR estimate
implementation. ARM will want to use it's 'step' instructions. There also
don't appear to be any new estimate instructions in any arch in a long,
long time. Altivec vloge and vexpte may have been the first and last in
that field...
llvm-svn: 218698
This commit fixes llvm-cov's function coverage metric by using the number of executed functions instead of the number of fully covered functions.
Differential Revision: http://reviews.llvm.org/D5196
llvm-svn: 218672
Fixed lowering of this intrinsics in case when mask is v2i1 and v4i1.
Now cmp intrinsics lower in the following way:
(i8 (int_x86_avx512_mask_pcmpeq_q_128
(v2i64 %a), (v2i64 %b), (i8 %mask))) ->
(i8 (bitcast
(v8i1 (insert_subvector undef,
(v2i1 (and (PCMPEQM %a, %b),
(extract_subvector
(v8i1 (bitcast %mask)), 0))), 0))))
llvm-svn: 218669
The contract of this function seems problematic (fallback in either
direction seems like it could produce bugs in one client or another),
but here's some tests for its current behavior, at least. See the
commit/review thread of r218187 for more discussion.
llvm-svn: 218626
This takes a single argument convertible to T, and
- if the Optional has a value, returns the existing value,
- otherwise, constructs a T from the argument and returns that.
Inspired by std::experimental::optional from the "Library Fundamentals" C++ TS.
llvm-svn: 218618
llvm::huge_valf is defined in a header file, so it is initialized
multiple times in every compiled unit upon program startup.
With non-VC compilers huge_valf is set to a HUGE_VALF which the
compiler can probably optimize out.
With VC numeric_limits<float>::infinity() does not return a number
but a runtime structure member which therotically may change
between calls so the compiler does not optimize out the
initialization and it happens many times. It can be easily seen by
placing a breakpoint on the initialization line.
This patch moves llvm::huge_valf initialization to a source file
instead of the header.
llvm-svn: 218567
This is purely refactoring. No functional changes intended. PowerPC is the only target
that is currently using this interface.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
And:
z = y / x
into:
z = y * rcpe(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
There is one hook in TargetLowering to get the target-specific opcode for an estimate instruction
along with the number of refinement steps needed to make the estimate usable.
Differential Revision: http://reviews.llvm.org/D5484
llvm-svn: 218553
code generation options from TargetMachine. This will depend
upon Function + TargetSubtargetInfo based code generation at
which point resetTargetOptions and this code can be removed.
llvm-svn: 218491
Add SelectionDAG TableGen definitions for BR_CC so that targets can instruction-select
BR_CC using TableGen pattern matching.
Patch by deadal nix.
llvm-svn: 218476
llvm::format() is somewhat unsafe. The compiler does not check that integer
parameter size matches the %x or %d size and it does not complain when a
StringRef is passed for a %s. And correctly using a StringRef with format() is
ugly because you have to convert it to a std::string then call c_str().
The cases where llvm::format() is useful is controlling how numbers and
strings are printed, especially when you want fixed width output. This
patch adds some new formatting functions to raw_streams to format numbers
and StringRefs in a type safe manner. Some examples:
OS << format_hex(255, 6) => "0x00ff"
OS << format_hex(255, 4) => "0xff"
OS << format_decimal(0, 5) => " 0"
OS << format_decimal(255, 5) => " 255"
OS << right_justify(Str, 5) => " foo"
OS << left_justify(Str, 5) => "foo "
llvm-svn: 218463
Summary:
I originally tried doing this specifically for X86 in the backend in D5091,
but it was rather brittle and generally running too late to be general.
Furthermore, other targets may want to implement similar optimizations.
So I reimplemented it at the IR-level, fitting it into AtomicExpandPass
as it interacts with that pass (which could not be cleanly done before
at the backend level).
This optimization relies on a new target hook, which is only used by X86
for now, as the correctness of the optimization on other targets remains
an open question. If it is found correct on other targets, it should be
trivial to enable for them.
Details of the optimization are discussed in D5091.
Test Plan: make check-all + a new test
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5422
llvm-svn: 218455
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
llvm-svn: 218451
If we have multiple coverage counts for the same segment, we need to
add them up rather than arbitrarily choosing one. This fixes that and
adds a test with template instantiations to exercise it.
llvm-svn: 218432
For biendian targets like ARM and AArch64, it is useful to have the
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 218408
This change fixes the ARM and AArch64 relocation visitors in
RelocVisitor. They were unconditionally assuming the object data are
little-endian. Tests have been added to ensure that the
llvm-dwarfdump utility does not crash when processing big-endian
object files.
Patch by Charlie Turner.
llvm-svn: 218407
This change replaces the brittle if/else chain of string comparisons
with a switch statement on the detected target triple, removing the
need for testing arbitrary architecture names returned from
getFileFormatName, whose primary purpose seems to be for display
(user-interface) purposes. The visitor now takes a reference to the
object file, rather than its arbitrary file format name to figure out
whether the file is a 32 or 64-bit object file and what the detected
target triple is.
A set of tests have been added to help show that the refactoring processes
relocations for the same targets as the original code.
Patch by Charlie Turner.
llvm-svn: 218406
This reverts commit faac033f7364bb4226e22c8079c221c96af10d02.
The test depends on all targets to be enabled in llc in order to pass,
and needs to be rewritten/refactored to not have that dependency.
llvm-svn: 218393
For biendian targets like ARM and AArch64, it is useful to have the
output of the llvm-dwarfdump and llvm-objdump report the endianness
used when the object files were generated.
Patch by Charlie Turner.
llvm-svn: 218391
This change fixes the ARM and AArch64 relocation visitors in
RelocVisitor. They were unconditionally assuming the object data are
little-endian. Tests have been added to ensure that the
llvm-dwarfdump utility does not crash when processing big-endian
object files.
Patch by Charlie Turner.
llvm-svn: 218389
This change replaces the brittle if/else chain of string comparisons
with a switch statement on the detected target triple, removing the
need for testing arbitrary architecture names returned from
getFileFormatName, whose primary purpose seems to be for display
(user-interface) purposes. The visitor now takes a reference to the
object file, rather than its arbitrary file format name to figure out
whether the file is a 32 or 64-bit object file and what the detected
target triple is.
A set of tests have been added to help show that the refactoring processes
relocations for the same targets as the original code.
Patch by Charlie Turner.
llvm-svn: 218388
The doFinalization method checks that the LoopToAliasSetMap is
empty. LICM populates that map as it runs through the loop nest,
deleting the entries for child loops as it goes. However, if a child
loop is deleted by another pass (e.g. unrolling) then the loop will
never be deleted from the map because LICM walks the loop nest to
find entries it can delete.
The fix is to delete the loop from the map and free the alias set
when the loop is deleted from the loop nest.
Differential Revision: http://reviews.llvm.org/D5305
llvm-svn: 218387
Summary:
This patch makes use of AtomicExpandPass in Power for inserting fences around
atomic as part of an effort to remove fence insertion from SelectionDAGBuilder.
As a big bonus, it lets us use sync 1 (lightweight sync, often used by the mnemonic
lwsync) instead of sync 0 (heavyweight sync) in many cases.
I also added a test, as there was no test for the barriers emitted by the Power
backend for atomic loads and stores.
Test Plan: new test + make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5180
llvm-svn: 218331
Summary:
The goal is to eventually remove all the code related to getInsertFencesForAtomic
in SelectionDAGBuilder as it is wrong (designed for ARM, not really portable, works
mostly by accident because the backends are overly conservative), and repeats the
same logic that goes in emitLeading/TrailingFence.
In this patch, I make AtomicExpandPass insert the fences as it knows better
where to put them. Because this requires getting the fences and not just
passing an IRBuilder around, I had to change the return type of
emitLeading/TrailingFence.
This code only triggers on ARM for now. Because it is earlier in the pipeline
than SelectionDAGBuilder, it triggers and lowers atomic accesses to atomic so
SelectionDAGBuilder does not add barriers anymore on ARM.
If this patch is accepted I plan to implement emitLeading/TrailingFence for all
backends that setInsertFencesForAtomic(true), which will allow both making them
less conservative and simplifying SelectionDAGBuilder once they are all using
this interface.
This should not cause any functionnal change so the existing tests are used
and not modified.
Test Plan: make check-all, benefits from existing tests of atomics on ARM
Reviewers: jfb, t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5179
llvm-svn: 218329
This patch removes the old JIT memory manager (which does not provide any
useful functionality now that the old JIT is gone), and migrates the few
remaining clients over to SectionMemoryManager.
http://llvm.org/PR20848
llvm-svn: 218316
Summary:
This fixes a couple of issues. One is ensuring that AOK_Label rewrite
rules have a lower priority than AOK_Skip rules, as AOK_Skip needs to
be able to skip the brackets properly. The other part of the fix ensures
that we don't overwrite Identifier when looking up the identifier, and
that we use the locally available information to generate the AOK_Label
rewrite in ParseIntelIdentifier. Doing that in CreateMemForInlineAsm
would be problematic since the Start location there may point to the
beginning of a bracket expression, and not necessarily the beginning of
an identifier.
This also means that we don't need to carry around the InternlName field,
which helps simplify the code.
Test Plan: This will be tested on the clang side.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5445
llvm-svn: 218270
Summary:
r218229 made this function return a dummy nullptr in order to avoid
API breakage between clang/llvm.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5432
llvm-svn: 218266
As of July 2014, all backends have been updated to implement
AtomicRMWInst::Nand as ~(x & y) (and not as x & ~y, as some did previously).
This was added to the release notes in r212635 (and the LangRef had been
changed), but it seems that we forgot to update the header-file description.
llvm-svn: 218236
The implementation of the callback in clang's Sema will return an
internal name for labels.
Test Plan: Will be tested in clang.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4587
llvm-svn: 218229
This is purely a plumbing patch. No functional changes intended.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
The first step is to add a target hook for RSQRTE, take the already target-independent code selfishly hoarded by PPC, and put it into DAGCombiner.
Next steps:
The code in DAGCombiner::BuildRSQRTE() should be refactored further; tests that exercise that logic need to be added.
Logic in PPCTargetLowering::BuildRSQRTE() should be hoisted into DAGCombiner.
X86 and AArch64 overrides for TargetLowering.BuildRSQRTE() should be added.
Differential Revision: http://reviews.llvm.org/D5425
llvm-svn: 218219
This splits the logic for actually looking up coverage information
from the logic that displays it. These were tangled rather thoroughly
so this change is a bit large, but it mostly consists of moving things
around. The coverage lookup logic itself now lives in the library,
rather than being spread between the library and the tool.
llvm-svn: 218184
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
llvm-svn: 218120
With this optimization, we will not always insert zext for values crossing
basic blocks, but insert sext if the users of a value crossing basic block
has preference of sign predicate.
llvm-svn: 218101
This format is simply a regular object file with the bitcode stored in a
section named ".llvmbc", plus any number of other (non-allocated) sections.
One immediate use case for this is to accommodate compilation processes
which expect the object file to contain metadata in non-allocated sections,
such as the ".go_export" section used by some Go compilers [1], although I
imagine that in the future we could consider compiling parts of the module
(such as large non-inlinable functions) directly into the object file to
improve LTO efficiency.
[1] http://golang.org/doc/install/gccgo#Imports
Differential Revision: http://reviews.llvm.org/D4371
llvm-svn: 218078
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
llvm-svn: 218004
This type isn't owned polymorphically (as demonstrated by making the
dtor protected and everything still compiling) so just address the
warning by protecting the base dtor and making the derived class final.
llvm-svn: 217990
It isn't always useful to skip blank lines, as evidenced by the
somewhat awkward use of line_iterator in llvm-cov. This adds a knob to
control whether or not to skip blanks.
llvm-svn: 217960
Summary: These will be used to implement support for useful forward declarartions.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5328
llvm-svn: 217949
This required a new hook called hasLoadLinkedStoreConditional to know whether
to expand atomics to LL/SC (ARM, AArch64, in a future patch Power) or to
CmpXchg (X86).
Apart from that, the new code in AtomicExpandPass is mostly moved from
X86AtomicExpandPass. The main result of this patch is to get rid of that
pass, which had lots of code duplicated with AtomicExpandPass.
llvm-svn: 217928
By class-instance values I mean 'Class<Arg>' in 'Class<Arg>.Field' or in
'Other<Class<Arg>>' (syntactically s SimpleValue). This is to differentiate
from unnamed/anonymous record definitions (syntactically an ObjectBody) which
are not affected by this change.
Consider the testcase:
class Struct<int i> {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
class Class<Struct s> {
int Class_J = s.J;
}
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
defm Defm : MultiClass<2>;
Before this fix, DefmDef.Class_J yields !shl(I, 1) instead of 8.
This is the sequence of events. We start with this:
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
During ParseDef the anonymous object for the class-instance value is created:
multiclass Multiclass<int i> {
def anonymous_0 : Struct<i>;
def Def : Class<NAME#anonymous_0>;
}
Then class Struct<i> is added to anonymous_0. Also Class<NAME#anonymous_0> is
added to Def:
multiclass Multiclass<int i> {
def anonymous_0 {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
def Def {
int Class_J = NAME#anonymous_0.J;
}
}
So far so good but then we move on to instantiating this in the defm
by substituting the template arg 'i'.
This is how the anonymous prototype looks after fully instantiating.
defm Defm = {
def Defmanonymous_0 {
int I = 4;
int J = !shl(I, 1);
}
Note that we only resolved the reference to the template arg. The
non-template-arg reference in 'J' has not been resolved yet.
Then we go on to instantiating the Def prototype:
def DefmDef {
int Class_J = NAME#anonymous_0.J;
}
Which is resolved to Defmanonymous_0.J and then to !shl(I, 1).
When we fully resolve each record in a defm, Defmanonymous_0.J does get set
to 8 but that's too late for its use.
The patch adds a new attribute to the Record class that indicates that this
def is actually a class-instance value that may be *used* by other defs in a
multiclass. (This is unlike regular defs which don't reference each other and
thus can be resolved indepedently.) They are then fully resolved before the
other defs while the multiclass is instantiated.
I added vg_leak to the new test. I am not sure if this is necessary but I
don't think I have a way to test it. I can also check in without the XFAIL
and let the bots test this part.
Also tested that X86.td.expanded and AAarch64.td.expanded were unchange before
and after this change. (This issue triggering this problem is a WIP patch.)
Part of <rdar://problem/17688758>
llvm-svn: 217886
objects. There were a few FIXMEs in ARMAsmBackend.cpp suggesting the class
definitions should be in a separate file. Starting with ARMAsmBackend, the
class definition has been put in a header file, and #includes reduced. Each
sub-type of ARMAsmBackend is now in its own header file.
Derived types have been painted with a different color of bike-shed:
s/DarwinARMAsmBackend/ARMAsmBackendDarwin/g
s/ARMWinCOFFAsmBackend/ARMAsmBackendWinCOFF/g
s/ELFARMAsmBackend/ARMAsmBackendELF/g
Finally, clang-format has been run across ARMAsmBackend.cpp
llvm-svn: 217866
Teach yaml2obj how to make a bigobj COFF file. Like the rest of LLVM,
we automatically decide whether or not to use regular COFF or bigobj
COFF on the fly depending on how many sections the resulting object
would have.
This ends the task of adding bigobj support to LLVM.
N.B. This was tested by forcing yaml2obj to be used in bigobj mode
regardless of the number of sections. While a dedicated test was
written, the smallest I could make it was 36 MB (!) of yaml and it still
took a significant amount of time to execute on a powerful machine.
llvm-svn: 217858
This finishes the ability of llvm-objdump to print out all information from
the LC_DYLD_INFO load command.
The -bind option prints out symbolic references that dyld must resolve
immediately.
The -lazy-bind option prints out symbolc reference that are lazily resolved on
first use.
The -weak-bind option prints out information about symbols which dyld must
try to coalesce across images.
llvm-svn: 217853
This lowers frem to a runtime libcall inside fast-isel.
The test case also checks the CallLoweringInfo bug that was exposed by this
change.
This fixes rdar://problem/18342783.
llvm-svn: 217833
This fixes a bug in FastISel::CallLoweringInfo, where the number of
arguments was obtained from the argument vector before it had been
initialized.
Test case follows in another commit.
llvm-svn: 217832
We already have routines to encode SLEB128 as well as encode/decode ULEB128.
This last function fills out the matrix. I'll need this for some llvm-objdump
work I am doing.
llvm-svn: 217830
Teach WinCOFFObjectWriter how to write -mbig-obj style object files;
these object files allow for more sections inside an object file.
Our support for BigObj is notably different from binutils and cl: we
implicitly upgrade object files to BigObj instead of asking the user to
compile the same file *again* but with another flag. This matches up
with how LLVM treats ELF variants.
This was tested by forcing LLVM to always emit BigObj files and running
the entire test suite. A specific test has also been added.
I've lowered the maximum number of sections in a normal COFF file,
VS "14" CTP 3 supports no more than 65279 sections. This is important
otherwise we might not switch to BigObj quickly enough, leaving us with
a COFF file that we couldn't link.
yaml2obj support is all that remains to implement.
Differential Revision: http://reviews.llvm.org/D5349
llvm-svn: 217812
There's some other cleanup that could happen here, but this is at least
the mechanical transformation to unique_ptr.
Derived from a patch by Anton Yartsev.
llvm-svn: 217803
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
llvm-svn: 217801
More methods to follow.
Using StringRef allows us the EE interface to work with more string types
without forcing construction of std::strings.
llvm-svn: 217794
This doesn't change the interface or gives additional safety but removes
a ton of retain/release boilerplate.
No functionality change.
llvm-svn: 217778
RAUW was only used on DIType to merge declarations and full definitions
of types. In order to support the same functionality for functions and
global variables, move the function up type DI type hierarchy to the
common parent of DIType, DISubprogram and DIVariable which is
DIDescriptor.
This functionality will be exercized when we add the code to emit
imported declarations for forward declared function/variables.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5325
llvm-svn: 217748
A single function in SourceCoverageDataManager was the only user of
some of the comparisons in CounterMappingRegion, and at this point we
know that only one file is relevant. This lets us use slightly simpler
logic directly in the client.
llvm-svn: 217745
Similar to my previous -exports-trie option, the -rebase option dumps info from
the LC_DYLD_INFO load command. The rebasing info is a list of the the locations
that dyld needs to adjust if a mach-o image is not loaded at its preferred
address. Since ASLR is now the default, images almost never load at their
preferred address, and thus need to be rebased by dyld.
llvm-svn: 217709
Summary: This will be used in clang.
Test Plan: Will be tested on the clang side.
Reviewers: hansw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5337
llvm-svn: 217702
The main difference is the removal of
std::error_code exists(const Twine &path, bool &result);
It was an horribly redundant interface since a file not existing is also a valid
error_code. Now we have an access function that returns just an error_code. This
is the only function that has to be implemented for Unix and Windows. The
functions can_write, exists and can_execute an now just wrappers.
One still has to be very careful using these function to avoid introducing
race conditions (Time of check to time of use).
llvm-svn: 217625
Leveraging both intrusive shared_ptr-ing (std::enable_shared_from_this)
and shared_ptr<T>-owning-U (to allow external users to hold
std::shared_ptr<CostT> while keeping the underlying PoolEntry alive).
The intrusiveness could be removed if we had a weak_set that implicitly
removed items from the set when their underlying data went away.
This /might/ fix an existing memory leak reported by LeakSanitizer in
r217504.
llvm-svn: 217563
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
llvm-svn: 217548
Summary:
Make CallingConv::ID a plain unsigned instead of enum with a
fixed set of valus. LLVM IR allows arbitraty calling conventions (you are
free to write cc12345), and loading them as enum is an undefined
behavior. This was reported by UBSan.
Test Plan: llvm regression test suite
Reviewers: nicholas
Reviewed By: nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5248
llvm-svn: 217529
"Unroll" is not the appropriate name for this variable. Clang already uses
the term "interleave" in pragmas and metadata for this.
Differential Revision: http://reviews.llvm.org/D5066
llvm-svn: 217528
This adds support for reading the "bigobj" variant of COFF produced by
cl's /bigobj and mingw's -mbig-obj.
The most significant difference that bigobj brings is more than 2**16
sections to COFF.
bigobj brings a few interesting differences with it:
- It doesn't have a Characteristics field in the file header.
- It doesn't have a SizeOfOptionalHeader field in the file header (it's
only used in executable files).
- Auxiliary symbol records have the same width as a symbol table entry.
Since symbol table entries are bigger, so are auxiliary symbol
records.
Write support will come soon.
Differential Revision: http://reviews.llvm.org/D5259
llvm-svn: 217496
Summary:
This patch moves the profile reading logic out of the Sample Profile
transformation into a generic profile reader facility in
lib/ProfileData.
The intent is to use this new reader to implement a sample profile
reader/writer that can be used to convert sample profiles from external
sources into LLVM.
This first patch introduces no functional changes. It moves the profile
reading code from lib/Transforms/SampleProfile.cpp into
lib/ProfileData/SampleProfReader.cpp.
In subsequent patches I will:
- Add a bitcode format for sample profiles to allow for more efficient
encoding of the profile.
- Add a writer for both text and bitcode format profiles.
- Add a 'convert' command to llvm-profdata to be able to convert between
the two (and serve as entry point for other sample profile formats).
Reviewers: bogner, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5250
llvm-svn: 217437
llvm-cov had a SourceRange type that was nearly identical to a
CountedRegion except that it shaved off a couple of fields. There
aren't likely to be enough of these for the minor memory savings to be
worth the extra complexity here.
llvm-svn: 217417
Previously, fast-isel would not clean up after failing to select a call
instruction, because it would have called flushLocalValueMap() which moves
the insertion point, making SavedInsertPt in selectInstruction() invalid.
Fixing this by making SavedInsertPt a member variable, and having
flushLocalValueMap() update it.
This removes some redundant code at -O0, and more importantly fixes PR20863.
Differential Revision: http://reviews.llvm.org/D5249
llvm-svn: 217401
to make sure we don't do invalid load of an enum. Share the
conversion code between llvm::Module implementation and the
verifier.
This bug was reported by UBSan.
llvm-svn: 217395
This change teaches LazyValueInfo to use the @llvm.assume intrinsic. Like with
the known-bits change (r217342), this requires feeding a "context" instruction
pointer through many functions. Aside from a little refactoring to reuse the
logic that turns predicates into constant ranges in LVI, the only new code is
that which can 'merge' the range from an assumption into that otherwise
computed. There is also a small addition to JumpThreading so that it can have
LVI use assumptions in the same block as the comparison feeding a conditional
branch.
With this patch, we can now simplify this as expected:
int foo(int a) {
__builtin_assume(a > 5);
if (a > 3) {
bar();
return 1;
}
return 0;
}
llvm-svn: 217345
This adds a ScalarEvolution-powered transformation that updates load, store and
memory intrinsic pointer alignments based on invariant((a+q) & b == 0)
expressions. Many of the simple cases we can get with ValueTracking, but we
still need something like this for the more complicated cases (such as those
with an offset) that require some algebra. Note that gcc's
__builtin_assume_aligned's optional third argument provides exactly for this
kind of 'misalignment' offset for which this kind of logic is necessary.
The primary motivation is to fixup alignments for vector loads/stores after
vectorization (and unrolling). This pass is added to the optimization pipeline
just after the SLP vectorizer runs (which, admittedly, does not preserve SE,
although I imagine it could). Regardless, I actually don't think that the
preservation matters too much in this case: SE computes lazily, and this pass
won't issue any SE queries unless there are any assume intrinsics, so there
should be no real additional cost in the common case (SLP does preserve DT and
LoopInfo).
llvm-svn: 217344
This change, which allows @llvm.assume to be used from within computeKnownBits
(and other associated functions in ValueTracking), adds some (optional)
parameters to computeKnownBits and friends. These functions now (optionally)
take a "context" instruction pointer, an AssumptionTracker pointer, and also a
DomTree pointer, and most of the changes are just to pass this new information
when it is easily available from InstSimplify, InstCombine, etc.
As explained below, the significant conceptual change is that known properties
of a value might depend on the control-flow location of the use (because we
care that the @llvm.assume dominates the use because assumptions have
control-flow dependencies). This means that, when we ask if bits are known in a
value, we might get different answers for different uses.
The significant changes are all in ValueTracking. Two main changes: First, as
with the rest of the code, new parameters need to be passed around. To make
this easier, I grouped them into a structure, and I made internal static
versions of the relevant functions that take this structure as a parameter. The
new code does as you might expect, it looks for @llvm.assume calls that make
use of the value we're trying to learn something about (often indirectly),
attempts to pattern match that expression, and uses the result if successful.
By making use of the AssumptionTracker, the process of finding @llvm.assume
calls is not expensive.
Part of the structure being passed around inside ValueTracking is a set of
already-considered @llvm.assume calls. This is to prevent a query using, for
example, the assume(a == b), to recurse on itself. The context and DT params
are used to find applicable assumptions. An assumption needs to dominate the
context instruction, or come after it deterministically. In this latter case we
only handle the specific case where both the assumption and the context
instruction are in the same block, and we need to exclude assumptions from
being used to simplify their own ephemeral values (those which contribute only
to the assumption) because otherwise the assumption would prove its feeding
comparison trivial and would be removed.
This commit adds the plumbing and the logic for a simple masked-bit propagation
(just enough to write a regression test). Future commits add more patterns
(and, correspondingly, more regression tests).
llvm-svn: 217342
This adds a set of utility functions for collecting 'ephemeral' values. These
are LLVM IR values that are used only by @llvm.assume intrinsics (directly or
indirectly), and thus will be removed prior to code generation, implying that
they should be considered free for certain purposes (like inlining). The
inliner's cost analysis, and a few other passes, have been updated to account
for ephemeral values using the provided functionality.
This functionality is important for the usability of @llvm.assume, because it
limits the "non-local" side-effects of adding llvm.assume on inlining, loop
unrolling, etc. (these are hints, and do not generate code, so they should not
directly contribute to estimates of execution cost).
llvm-svn: 217335
This adds an immutable pass, AssumptionTracker, which keeps a cache of
@llvm.assume call instructions within a module. It uses callback value handles
to keep stale functions and intrinsics out of the map, and it relies on any
code that creates new @llvm.assume calls to notify it of the new instructions.
The benefit is that code needing to find @llvm.assume intrinsics can do so
directly, without scanning the function, thus allowing the cost of @llvm.assume
handling to be negligible when none are present.
The current design is intended to be lightweight. We don't keep track of
anything until we need a list of assumptions in some function. The first time
this happens, we scan the function. After that, we add/remove @llvm.assume
calls from the cache in response to registration calls and ValueHandle
callbacks.
There are no new direct test cases for this pass, but because it calls it
validation function upon module finalization, we'll pick up detectable
inconsistencies from the other tests that touch @llvm.assume calls.
This pass will be used by follow-up commits that make use of @llvm.assume.
llvm-svn: 217334
Instead of aligning and moving the CurPtr forward, and then comparing
with End, simply calculate how much space is needed, and compare that
to how much is available.
Hopefully this avoids any doubts about comparing addresses possibly
derived from past the end of the slab array, overflowing, etc.
Also add a test where aligning CurPtr would move it past End.
llvm-svn: 217330
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
llvm-svn: 217310
Summary:
This fixes a long standing issue where we would emit many little .text
sections and only one .pdata and .xdata section. Now we generate one
.pdata / .xdata pair per .text section and associate them correctly.
Fixes PR19667.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5181
llvm-svn: 217176
Alexey Samsonov