257d2dafbd
Testcase for 94996 (PR 6157)
...
llvm-svn: 95021
2010-02-01 22:46:05 +00:00
d5575f29f1
Generate DEBUG_VALUE comments on x86. The (limited)
...
dbg.declare's we currently generate go through both
register allocators without perturbing the results.
llvm-svn: 94480
2010-01-26 00:09:58 +00:00
7771b7c621
If a instruction belongs to another function (and not current function) as per debug info attached with the instruction then ignore the dangling lexical scope of this instruction. Such scopes are unreachable.
...
llvm-svn: 93967
2010-01-20 02:05:23 +00:00
27d71d2d3a
Reverting.
...
llvm-svn: 93819
2010-01-19 00:12:05 +00:00
0c90d43b70
Enable code to emit dbg.declare as DEBUG_VALUE
...
comments (fast isel, X86). This doesn't seem
to break any functionality, but will introduce
cases where -g affects the generated code. I'll
be fixing that.
llvm-svn: 93811
2010-01-18 23:34:55 +00:00
b324e66f4c
Improve llvm.dbg.declare intrinsic by referring directly to the storage in its first argument, via function-local metadata (instead of via a bitcast).
...
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
It also strips old llvm.dbg.declare intrinsics that did not pass metadata as the first argument.
llvm-svn: 93531
2010-01-15 19:04:09 +00:00
8d4904b639
Revert r93504 because older uses of llvm.dbg.declare intrinsics need to be auto-upgraded
...
llvm-svn: 93515
2010-01-15 17:36:47 +00:00
5d6551816b
Improve llvm.dbg.declare intrinsic by referring directly to the storage in its first argument, via function-local metadata (instead of via a bitcast).
...
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
llvm-svn: 93504
2010-01-15 03:37:48 +00:00
d146e2e3df
If a scope has only one instruction then first instruction is also the last instruction.
...
llvm-svn: 92736
2010-01-05 16:59:17 +00:00
be94f23992
Remove dead debug info intrinsics.
...
Intrinsic::dbg_stoppoint
Intrinsic::dbg_region_start
Intrinsic::dbg_region_end
Intrinsic::dbg_func_start
AutoUpgrade simply ignores these intrinsics now.
llvm-svn: 92557
2010-01-05 01:10:40 +00:00
63cdd6fcf3
Remove oversimplified test case.
...
llvm-svn: 92510
2010-01-04 20:54:06 +00:00
a7c8e58d95
The test, derived from optimzed IR, does not mention "bar" in debug info anywhere so the dwarf writer is not expected to emit any debug info for function "bar".
...
llvm-svn: 92499
2010-01-04 19:41:13 +00:00
c69d9607f8
XFAIL on ppc-darwin.
...
llvm-svn: 91495
2009-12-16 02:11:38 +00:00
e52b1fa128
Remove tests that are not suitable anymore. Plus they are not testing the original bugfixes anymore. These tests were inserted to check bug fixes in code that handled debug info intrinsics. These intrinsics are no longer used and now llvm parser simply ignores old .dbg intrinsics from these dead tests.
...
llvm-svn: 90923
2009-12-09 01:46:00 +00:00
512001ac7d
Revert 90858 90875 and 90805 for now.
...
llvm-svn: 90898
2009-12-08 23:21:45 +00:00
7d723ec70d
Do not try to push dead variable's debug info into namespace info.
...
llvm-svn: 90857
2009-12-08 15:01:35 +00:00
0a2c0bcb14
Clear function specific containers while processing end of a function, even if DW_TAG_subprogram for current function is not found.
...
llvm-svn: 90247
2009-12-01 18:13:48 +00:00
6a77f51520
Add missing run line. Devang, please check.
...
llvm-svn: 86795
2009-11-11 03:10:03 +00:00
78319c67ca
Do not assume first function scope seen represents current function.
...
llvm-svn: 86771
2009-11-11 00:31:36 +00:00
4450f26621
While creating DbgScopes, do not forget parent scope.
...
llvm-svn: 86763
2009-11-11 00:18:40 +00:00
445737df6a
fix typo
...
llvm-svn: 86281
2009-11-06 20:10:46 +00:00
33e0c99d67
Tolerate invalid derived type.
...
llvm-svn: 86269
2009-11-06 18:24:05 +00:00
cc11371b77
Do not bother to emit debug info for nameless global variable.
...
llvm-svn: 86259
2009-11-06 17:58:12 +00:00
06ce6506d2
Do not try to emit debug info entry for dead global variable.
...
llvm-svn: 86212
2009-11-06 01:30:04 +00:00
1cb5116292
Parse debug info attached with insertvalue and extractvalue instructions.
...
llvm-svn: 85921
2009-11-03 19:06:07 +00:00
d9a1292d47
Reclaim a lost month.
...
llvm-svn: 84303
2009-10-17 03:28:20 +00:00
8f842d31fd
Parse PHI instruction with attached metadata.
...
llvm-svn: 84264
2009-10-16 18:45:49 +00:00
d0099a94db
If there is not any llvm instruction associated with each lexical scope encoded in debug info then create such scope on demand for variable info.
...
llvm-svn: 84262
2009-10-16 18:18:03 +00:00
3dc625cdce
It's possible for a global variable to be optimized out of a metadata object. So
...
we should allow a "null" with this dyn_cast.
llvm-svn: 83573
2009-10-08 20:52:51 +00:00
4dbb301f17
Move the dominator verification code out of special code embedded within
...
the PassManager code into a regular verifyAnalysis method.
Also, reorganize loop verification. Make the LoopPass infrastructure
call verifyLoop as needed instead of having LoopInfo::verifyAnalysis
check every loop in the function after each looop pass. Add a new
command-line argument, -verify-loop-info, to enable the expensive
full checking.
llvm-svn: 82952
2009-09-28 00:27:48 +00:00
0f3ef7be50
Eliminate more redundant llvm-as calls.
...
llvm-svn: 81540
2009-09-11 18:17:12 +00:00
1880092722
Change tests from "opt %s" to "opt < %s" so that opt doesn't see the
...
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
llvm-svn: 81537
2009-09-11 18:01:28 +00:00
c8054d90fb
Eliminate more uses of llvm-as and llvm-dis.
...
llvm-svn: 81293
2009-09-09 00:09:15 +00:00
72a13d2476
Use opt -S instead of piping bitcode output through llvm-dis.
...
llvm-svn: 81257
2009-09-08 22:34:10 +00:00
9737a63ed8
Change these tests to feed the assembly files to opt directly, instead
...
of using llvm-as, now that opt supports this.
llvm-svn: 81226
2009-09-08 16:50:01 +00:00
18e03dd70c
Fix DbgStopPointInst->getFileName/getDirectory, broken by the MDNodification in
...
r80406, and readd a -print-dbginfo test.
llvm-svn: 80778
2009-09-02 11:13:56 +00:00
80ae34974b
Reapply 79977.
...
Use MDNodes to encode debug info in llvm IR.
llvm-svn: 80406
2009-08-28 23:24:31 +00:00
10cdbd3b73
This is passing for PPC on Mac OS X.
...
llvm-svn: 80210
2009-08-27 05:49:50 +00:00
f08e35d9dc
Revert 79977. It causes llvm-gcc bootstrap failures on some platforms.
...
llvm-svn: 80073
2009-08-26 05:01:18 +00:00
973bb97977
Remove target triple from this test, it fails on x86-64 with
...
--enable-targets=host-only otherwise.
llvm-svn: 80000
2009-08-25 16:53:15 +00:00
0d4bbf2c4a
Remove obsolete -f flags.
...
llvm-svn: 79992
2009-08-25 15:38:29 +00:00
02aac922b4
Update DebugInfo interface to use metadata, instead of special named llvm.dbg.... global variables, to encode debugging information in llvm IR. This is mostly a mechanical change that tests metadata support very well.
...
This change speeds up llvm-gcc by more then 6% at "-O0 -g" (measured by compiling InstructionCombining.cpp!)
llvm-svn: 79977
2009-08-25 05:24:07 +00:00
af590e5033
Take another shot at disabling this when no ppc support is available.
...
llvm-svn: 79003
2009-08-14 16:40:12 +00:00
148edca7b8
Mark this test as requiring the powerpc target.
...
llvm-svn: 78961
2009-08-13 23:47:58 +00:00
de11f1efb0
upgrade
...
llvm-svn: 74016
2009-06-23 22:11:37 +00:00
14491abe48
Use MainCU if it is available.
...
llvm-svn: 73457
2009-06-16 02:09:30 +00:00
56e6fe1642
Gracefully handle imbalanced inline function begin and end markers.
...
llvm-svn: 73426
2009-06-15 21:45:50 +00:00
64e6529e76
llvm.dbg.region.end() intrinsic is not required to be in _last_ basic block in a function. If that happens then any basic block that follows (lexically) the block with regin.end will not have scope info available. LexicalScopeStack relies on processing basic block in CFG order, but this processing order is not guaranteed. Things get complicated when the optimizer gets a chance to optimizer IR with dbg intrinsics.
...
Apply defensive patch to preserve at least one lexical scope till the end of function.
llvm-svn: 73282
2009-06-13 02:16:18 +00:00
c1fee72162
Clear AbstractInstanceRootMap at the end of the function.
...
llvm-svn: 73244
2009-06-12 19:24:05 +00:00
84295eb636
Fix broken logic in DominatorTreeBase::Split. Part of PR4238.
...
llvm-svn: 72231
2009-05-21 21:47:54 +00:00
7abc25ad68
Remove too large testcase.
...
llvm-svn: 71730
2009-05-13 21:51:26 +00:00
1d601cdaf4
Move the bookkeeping of the debug scopes back to the place where it
...
belonged. The variable declaration stuff wasn't happy with it where it
was. Sorry that the testcase is so big. Bugpoint wasn't able to reduce it
successfully.
llvm-svn: 71714
2009-05-13 20:33:33 +00:00
9ae29b2d8f
-Remove the DwarfWriter::RecordSourceLine calls from the instruction selectors.
...
-Depend on DebugLocs for source line info.
(Comes with Regression-Be-Gone(tm))
llvm-svn: 70871
2009-05-04 16:23:49 +00:00
79be34012f
Revert r70803 for now, it causes a regression.
...
llvm-svn: 70811
2009-05-03 23:27:19 +00:00
ce7196b903
-Remove the DwarfWriter::RecordSourceLine calls from the instruction selectors.
...
-Depend on DebugLocs for source line info.
llvm-svn: 70803
2009-05-03 22:03:35 +00:00
084669a1c9
Second attempt:
...
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
2009-04-29 00:15:41 +00:00
56f2987a87
r70270 isn't ready yet. Back this out. Sorry for the noise.
...
llvm-svn: 70275
2009-04-28 01:04:53 +00:00
d0ae15946c
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
...
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
2009-04-28 00:21:31 +00:00
51b4a28878
Global variables don't have a corresponding llvm.dbg.declare, yet it is possible
...
to obtain debug info about them.
Introduce helpers to access debug info for global variables. Also introduce a
helper that works for both local and global variables.
llvm-svn: 66541
2009-03-10 13:41:26 +00:00
abe4192442
Ignore the debug info intrinsics when looking for dependency through basic block.
...
llvm-svn: 66119
2009-03-05 01:45:43 +00:00
0365d3b8b5
Make my earlier patch to skip debug intrinsics
...
when counting work; it was only off by 1.
llvm-svn: 65993
2009-03-04 01:20:34 +00:00
09c3e8ec00
Instruction counters must skip the bitcasts that
...
feed into llvm.dbg.declare nodes, as well as
the debug directives themselves.
llvm-svn: 65976
2009-03-03 22:36:47 +00:00
77456b7ab4
When removing a store to an alloca that has only one
...
use, check also for the case where it has two uses,
the other being a llvm.dbg.declare. This is needed so
debug info doesn't affect codegen.
llvm-svn: 65970
2009-03-03 21:26:39 +00:00
506035105c
Ignore the debug info intrinsics when adding instructions into alias sets.
...
llvm-svn: 65934
2009-03-03 06:02:04 +00:00
fcf4ecec45
Testcase for line number sinking in InstCombine.
...
llvm-svn: 65911
2009-03-03 01:10:01 +00:00
786c5973f7
- Use the "Fast" flag instead of "OptimizeForSize" to determine whether to emit
...
a DBG_LABEL or not. We want to fall back to the original way of emitting debug
info when we're in -O0/-fast mode.
- Add plumbing in to pass the "Fast" flag to places that need it.
- XFAIL DebugInfo/deaddebuglabel.ll. This is finding 11 labels instead of 8. I
need to investigate still.
llvm-svn: 65367
2009-02-24 02:35:30 +00:00
7c528e95af
Add test case for checkin @r65314.
...
llvm-svn: 65315
2009-02-23 10:15:04 +00:00
66c5a1dd50
The subprogram die may not exist while creating "default" scope.
...
llvm-svn: 64920
2009-02-18 17:29:38 +00:00
97ba824ad9
Do not add redundant arguments in a method definition DIE.
...
llvm-svn: 63527
2009-02-02 17:51:41 +00:00
e7a112111a
Make this test case smaller.
...
llvm-svn: 63526
2009-02-02 17:50:43 +00:00
c094970cd2
Each input file is encoded as a separate compile unit in LLVM debugging
...
information output. However, many target specific tool chains prefer to encode
only one compile unit in an object file. In this situation, the LLVM code
generator will include debugging information entities in the compile unit
that is marked as main compile unit. The code generator accepts maximum one main
compile unit per module. If a module does not contain any main compile unit
then the code generator will emit multiple compile units in the output object
file.
[Part 1]
Update DebugInfo APIs to accept optional boolean value while creating DICompileUnit to mark the unit as "main" unit. By defaults all units are considered non-main. Update SourceLevelDebugging.html to document "main" compile unit.
Update DebugInfo APIs to not accept and encode separate source file/directory entries while creating various llvm.dbg.* entities. There was a recent, yet to be documented, change to include this additional information so no documentation changes are required here.
Update DwarfDebug to handle "main" compile unit. If "main" compile unit is seen then all DIEs are inserted into "main" compile unit. All other compile units are used to find source location for llvm.dbg.* values. If there is not any "main" compile unit then create unique compile unit DIEs for each llvm.dbg.compile_unit.
[Part 2]
Create separate llvm.dbg.compile_unit for each input file. Mark compile unit create for main_input_filename as "main" compile unit. Use appropriate compile unit, based on source location information collected from the tree node, while creating llvm.dbg.* values using DebugInfo APIs.
---
This is Part 1.
llvm-svn: 63400
2009-01-30 18:20:31 +00:00
acbb381cc4
Enable target tripple.
...
llvm-svn: 63361
2009-01-30 01:40:58 +00:00
a103ee4f0d
Linux and other target's encoding for DW_AT_declaration may not match.
...
llvm-svn: 63360
2009-01-30 01:37:30 +00:00
4ba91058d2
Add DW_AT_declaration for class methods.
...
llvm-svn: 63356
2009-01-30 01:21:46 +00:00
d21775ae0e
Give this test an explicit target, to make it host-independent.
...
llvm-svn: 63244
2009-01-28 22:14:58 +00:00
d7ecb3b661
Do not forget to derived type while constructing an array type.
...
llvm-svn: 63233
2009-01-28 21:08:20 +00:00
45c899cd15
Assorted debug info fixes.
...
- DW_AT_bit_size is only suitable for bitfields.
- Encode source location info for derived types.
- Source location and type size info is not useful for subroutine_type (info is included in respective DISubprogram) and array_type.
llvm-svn: 63077
2009-01-27 00:45:04 +00:00
486d309b34
Fix test case. Use valid file name and directory in global variable's debug info entry.
...
llvm-svn: 62883
2009-01-23 21:54:18 +00:00
dec7fe2e71
Do not use buggy llvm-gcc to generate testcases.
...
llvm-svn: 62770
2009-01-22 18:28:11 +00:00
6bbacbe372
Appropriately mark fowrad decls.
...
llvm-svn: 62625
2009-01-20 22:27:02 +00:00
6fbec1c230
Need compile unit to find location.
...
llvm-svn: 62624
2009-01-20 22:26:11 +00:00
8c8aa2ac29
Verify Intrinsic::dbg_declare.
...
llvm-svn: 62526
2009-01-19 21:00:48 +00:00
fa1b408b3b
Do not stumble over forward declared struct member.
...
llvm-svn: 62288
2009-01-16 00:50:53 +00:00
76d190cf4a
Validate dbg_* intrinsics before lowering them.
...
llvm-svn: 62286
2009-01-15 23:41:32 +00:00
8bdc698336
Use variable's context to identify respective DbgScope.
...
Use light weight DebugInfo object directly.
llvm-svn: 62269
2009-01-15 18:25:17 +00:00
76007e009e
Use DebugInfo interface to lower dbg_* intrinsics.
...
llvm-svn: 62126
2009-01-13 00:32:17 +00:00
b9905d7be3
This test passes again, unXFAIL.
...
llvm-svn: 61688
2009-01-05 09:30:47 +00:00
7be667c075
More precise XFAIL.
...
llvm-svn: 61265
2008-12-19 22:28:23 +00:00
be2a77f52c
Un-XFAIL this test because it's passing and John doesn't seem interested in un-XFAILing it.
...
llvm-svn: 61264
2008-12-19 22:25:01 +00:00
fd9aa62cc6
Xfail these tests for now.
...
llvm-svn: 61166
2008-12-17 22:53:09 +00:00
01a1e37154
add testcase for -print-dbginfo
...
llvm-svn: 61086
2008-12-16 10:10:23 +00:00
288fbd2133
Fix a couple of Dwarf bugs.
...
- Emit DW_AT_byte_size for struct and union of size zero.
- Emit DW_AT_declaration for forward type declaration.
llvm-svn: 60812
2008-12-10 00:15:44 +00:00
7ed6c5317c
If there are two consecutive llvm.dbg.stoppoint calls then
...
it is likely that the optimizer deleted code in between these
two intrinsics. Keep only the last llvm.dbg.stoppoint in this case.
llvm-svn: 59657
2008-11-19 18:56:50 +00:00
b8e0d59ceb
Handle (delete) dbg intrinsics while promoting alloca.
...
llvm-svn: 58826
2008-11-07 01:30:07 +00:00
8af0a362f1
Emit label for llvm.dbg.func.start of the inlined function.
...
llvm-svn: 58814
2008-11-06 21:28:20 +00:00
9e3e776e28
Emit label for llvm.dbg.func.start of the inlined function.
...
llvm-svn: 58786
2008-11-06 00:30:09 +00:00
a411e2a086
Testcase for PR2613
...
llvm-svn: 58537
2008-10-31 20:10:49 +00:00
fe9e2c587d
The Dwarf writer was comparing mangled and unmangled names for C++ code when we
...
have an unreachable block in a function. This was triggering the assert. This is
a horrid hack to cover this up.
Oh! for a good debug info architecture!
llvm-svn: 57714
2008-10-17 18:48:57 +00:00
07f5db0318
Testcase for debug info from data-only files.
...
This one is x86-32-Darwin specific.
llvm-svn: 53255
2008-07-08 21:57:56 +00:00
1e427c3264
sabre brings to my attention that the 'tr' suffix is also obsolete
...
llvm-svn: 51349
2008-05-20 21:00:03 +00:00
f45ff35bfe
Rename the last test with .llx extension to .ll, resolve duplicate test by renaming to isnan2. Now that no test has llx ending there is no need to search for them from dg.exp too.
...
llvm-svn: 51328
2008-05-20 19:52:04 +00:00
5f4b355f20
Remove llvm-upgrade and update tests.
...
llvm-svn: 48137
2008-03-10 07:21:50 +00:00
56d4903db5
Accept getelementptr starting at GV with all 0 indices as a
...
legitimate way of representing global variable GV in debug info.
llvm-svn: 46565
2008-01-30 19:00:21 +00:00
5bc753e26b
For PR1558:
...
Move tests that have C/C++ sources into the appropriate directory. This
allows them to be selected for testing based on whether llvm-gcc is
present or not.
llvm-svn: 39963
2007-07-17 06:20:38 +00:00
2660cef6d7
Convert .cvsignore files
...
llvm-svn: 37801
2007-06-29 16:35:07 +00:00
8bd5e1a0b8
fix failure on ahs3's tester
...
llvm-svn: 36791
2007-05-05 20:50:35 +00:00
b964f00d6a
For PR1319: Upgrade to new test harness.
...
llvm-svn: 36092
2007-04-15 22:37:04 +00:00
d029c7e666
Make the llvm-runtest function much more amenable by eliminating all the
...
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
llvm-svn: 35918
2007-04-11 19:56:59 +00:00
b4470fb0bf
Fix some FreeBSD/amd64 regressions.
...
llvm-svn: 35675
2007-04-04 22:07:44 +00:00
a131cf78ad
PR1068 - Unbounded array debug info.
...
llvm-svn: 32818
2007-01-02 11:53:52 +00:00
640509924e
Update tests that need to be run through llvm-upgrade. This is necessary
...
for upcoming changes to the llvm assembly grammar.
llvm-svn: 32768
2006-12-29 20:01:32 +00:00
581a07a34d
This now passes on Linux/x86
...
llvm-svn: 32306
2006-12-07 16:28:32 +00:00
7fb08347ea
Failing linux.
...
llvm-svn: 32292
2006-12-06 21:36:07 +00:00
a6cfd60a8c
These pass on Linux now.
...
llvm-svn: 32195
2006-12-04 20:46:05 +00:00
3082ed5364
Fixed to use current debug info.
...
llvm-svn: 32177
2006-12-04 12:23:17 +00:00
b12ab5fadb
Add compile unit size test
...
llvm-svn: 32040
2006-11-30 15:36:44 +00:00
e6f6890438
Correct comment
...
llvm-svn: 32039
2006-11-30 15:31:49 +00:00
030b840234
Pubnames test
...
llvm-svn: 32038
2006-11-30 15:25:59 +00:00
efcaa4a8f5
Test for PR1013.
...
llvm-svn: 31886
2006-11-20 21:58:02 +00:00
a3262ee8ec
XFAIL All but powerpc
...
llvm-svn: 31689
2006-11-11 22:14:46 +00:00
ebdf6f46eb
Works for PowerPC with frame pointers.
...
llvm-svn: 31679
2006-11-11 10:22:56 +00:00
bc60d34748
Must have a frame pointer argument fixed. Now fails on PowerPC.
...
llvm-svn: 31639
2006-11-10 17:56:29 +00:00
11ba2bf721
Must have a frame pointer.
...
llvm-svn: 31638
2006-11-10 17:51:25 +00:00
8488eac9d7
This is XFAILed on i[0-9]86 systems not Linux
...
llvm-svn: 31636
2006-11-10 17:47:28 +00:00
050747fc8c
Make it work on Darwin.
...
llvm-svn: 31551
2006-11-08 16:38:45 +00:00
41f6c7cfb2
XFAIL this on Linux until Jim gets Darwin ship shape.
...
llvm-svn: 31541
2006-11-08 06:43:16 +00:00
eb5bbd1ac8
Make some corrections to this test case.
...
llvm-svn: 31497
2006-11-07 07:58:02 +00:00
17ea4ec127
Ignore the Output dir.
...
llvm-svn: 31496
2006-11-07 07:34:56 +00:00
3b1d1b5262
Add a test case for making sure gdb can get a stack trace with our debug
...
information.
llvm-svn: 31495
2006-11-07 07:31:37 +00:00
Dale Johannesen