We already had a test for this for 32-bit SEH catchpads, but those don't
actually create funclets. We had a bug that only appeared in funclet
prologues, where we would establish EBP and ESI as our FP and BP, and
then downstream prologue code would overwrite them.
While I was at it, I fixed Win64+funclets+stackrealign. This issue
doesn't come up as often there due to the ABI requring 16 byte stack
alignment, but now we can rest easy that AVX and WinEH will work well
together =P.
llvm-svn: 252210
This fixes the issue of wrong CFA calculation in the following case:
0x08048400 <+0>: push %ebx
0x08048401 <+1>: sub $0x8,%esp
0x08048404 <+4>: **call 0x8048409 <test+9>**
0x08048409 <+9>: **pop %eax**
0x0804840a <+10>: add $0x1bf7,%eax
0x08048410 <+16>: mov %eax,%ebx
0x08048412 <+18>: call 0x80483f0 <bar>
0x08048417 <+23>: add $0x8,%esp
0x0804841a <+26>: pop %ebx
0x0804841b <+27>: ret
The highlighted instructions are a product of movpc instruction. The call
instruction changes the stack pointer, and pop instruction restores its
value. However, the rule for computing CFA is not updated and is wrong on
the pop instruction. So, e.g. backtrace in gdb does not work when on the pop
instruction. This adds cfi instructions for both call and pop instructions.
cfi_adjust_cfa_offset** instruction is used with the appropriate offset for
setting the rules to calculate CFA correctly.
Patch by Violeta Vukobrat.
Differential Revision: http://reviews.llvm.org/D14021
llvm-svn: 252176
Win64 has some strict requirements for the epilogue. As a result, we disable
shrink-wrapping for Win64 unless the block that gets the epilogue is already an
exit block.
Fixes PR24193.
llvm-svn: 252088
This patch improves the memory folding of the inserted float element for the (V)INSERTPS instruction.
The existing implementation occurs in the DAGCombiner and relies on the narrowing of a whole vector load into a scalar load (and then converted into a vector) to (hopefully) allow folding to occur later on. Not only has this proven problematic for debug builds, it also prevents other memory folds (notably stack reloads) from happening.
This patch removes the old implementation and moves the folding code to the X86 foldMemoryOperand handler. A new private 'special case' function - foldMemoryOperandCustom - has been added to deal with memory folding of instructions that can't just use the lookup tables - (V)INSERTPS is the first of several that could be done.
It also tweaks the memory operand folding code with an additional pointer offset that allows existing memory addresses to be modified, in this case to convert the vector address to the explicit address of the scalar element that will be inserted.
Unlike the previous implementation we now set the insertion source index to zero, although this is ignored for the (V)INSERTPSrm version, anything that relied on shuffle decodes (such as unfolding of insertps loads) was incorrectly calculating the source address - I've added a test for this at insertps-unfold-load-bug.ll
Differential Revision: http://reviews.llvm.org/D13988
llvm-svn: 252074
Patch by Slava Klochkov
The key difference between FMA* and FMA*_Int opcodes is that FMA*_Int opcodes are handled more conservatively. It is illegal to commute the 1st operand of FMA*_Int instructions as the upper bits of scalar FMA intrinsic result must be taken from the 1st operand, but such commute transformation would change those upper bits and invalidate the intrinsic's result.
Reviewers: Quentin Colombet, Elena Demikhovsky
Differential Revision: http://reviews.llvm.org/D13710
llvm-svn: 252060
The x86 "sitofp i64 to double" dag combine, in 32-bit mode, lowers sitofp
directly to X86ISD::FILD (or FILD_FLAG). This should not be done in soft-float mode.
llvm-svn: 252042
There is no point in having invoke safepoints handled differently than the
call safepoints. All relevant decisions could be made by looking at whether
or not gc.result and gc.relocate lay in a same basic block. This change will
allow to lower call safepoints with relocates and results in a different
basic blocks. See test case for example.
Differential Revision: http://reviews.llvm.org/D14158
llvm-svn: 252028
XOP has the VPCMOV instruction that performs the common vector bit select operation OR( AND( SRC1, SRC3 ), AND( SRC2, ~SRC3 ) )
This patch adds tablegen pattern matching for this instruction.
Differential Revision: http://reviews.llvm.org/D8841
llvm-svn: 251975
When push instructions are being used to pass function arguments on
the stack, and either EH or debugging are enabled, we need to generate
.cfi_adjust_cfa_offset directives appropriately. For (synch) EH, it is
enough for the CFA offset to be correct at every call site, while
for debugging we want to be correct after every push.
Darwin does not support this well, so don't use pushes whenever it
would be required.
Differential Revision: http://reviews.llvm.org/D13767
llvm-svn: 251904
In the current BB placement algorithm, a loop chain always contains all loop blocks. This has a drawback that cold blocks in the loop may be inserted on a hot function path, hence increasing branch cost and also reducing icache locality.
Consider a simple example shown below:
A
|
B⇆C
|
D
When B->C is quite cold, the best BB-layout should be A,B,D,C. But the current implementation produces A,C,B,D.
This patch filters those cold blocks off from the loop chain by comparing the ratio:
LoopBBFreq / LoopFreq
to 20%: if it is less than 20%, we don't include this BB to the loop chain. Here LoopFreq is the frequency of the loop when we reduce the loop into a single node. In general we have more cold blocks when the loop has few iterations. And vice versa.
Differential revision: http://reviews.llvm.org/D11662
llvm-svn: 251833
1) PR25154. This is basically a repeat of PR18102, which was fixed in
r200201, and broken again by r234430. The latter changed which of the
store nodes was merged into from the first to the last. Thus, we now
also need to prefer merging a later store at a given address into the
target node, instead of an earlier one.
2) While investigating that, I also realized I'd introduced a bug in
r236850. There, I removed a check for alignment -- not realizing that
nothing except the alignment check was ensuring that none of the stores
were overlapping! This is a really bogus way to ensure there's no
aliased stores.
A better solution to both of these issues is likely to always use the
code added in the 'if (UseAA)' branches which rearrange the chain based
on a more principled analysis. I'll look into whether that can be used
always, but in the interest of getting things back to working, I think a
minimal change makes sense.
llvm-svn: 251816
Optimized <8 x i32> to <8 x i16>
<4 x i64> to < 4 x i32>
<16 x i16> to <16 x i8>
All these oprtrations use now AVX512F set (KNL). Before this change it was implemented with AVX2 set.
Differential Revision: http://reviews.llvm.org/D14108
llvm-svn: 251764
This patch generalizes the zeroing of vector elements with the BLEND instructions. Currently a zero vector will only blend if the shuffled elements are correctly inline, this patch recognises when a vector input is zero (or zeroable) and modifies a local copy of the shuffle mask to support a blend. As a zeroable vector input may not be all zeroes, the zeroable vector is regenerated if necessary.
Differential Revision: http://reviews.llvm.org/D14050
llvm-svn: 251659
This is a usage of the IR-level fast-math-flags now that they are propagated to SDNodes.
This was originally part of D8900.
Removing the global 'enable-unsafe-fp-math' checks will require auto-upgrade and
possibly other changes.
Differential Revision: http://reviews.llvm.org/D9708
llvm-svn: 251450
convert float to half with mask/maskz for the reg to reg version and mask for the reg to mem version (there is no maskz version for reg to mem).
Differential Revision: http://reviews.llvm.org/D14113
llvm-svn: 251409
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
When taking the remainder of a value divided by a constant, visitREM()
attempts to convert the REM to a longer but faster sequence of instructions.
This conversion calls combine() on a speculative DIV instruction. Commit
rL250825 may cause this combine() to return a DIVREM, corrupting nearby nodes.
Flow eventually hits unreachable().
This patch adds a test case and a check to prevent visitREM() from trying
to convert the REM instruction in cases where a DIVREM is possible.
See http://reviews.llvm.org/D14035
llvm-svn: 251373
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251223
We don't need a mask of a rotation result to be a constant splat - any constant scalar/vector can be usefully folded.
Followup to D13851.
llvm-svn: 251197
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
Summary:
The logic here isn't straightforward because our support for
TargetOptions::GuaranteedTailCallOpt.
Also fix a bug where we were allowing tail calls to cdecl functions from
fastcall and vectorcall functions. We were special casing thiscall and
stdcall callers rather than checking for any convention that requires
clearing stack arguments before returning.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14024
llvm-svn: 251137
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
When we fold "mul ((add x, c1), c1)" -> "add ((mul x, c2), c1*c2)", we bail if (add x, c1) has multiple
users which would result in an extra add instruction.
In such cases, this patch adds a check to see if we can eliminate a multiply instruction in exchange for the extra add.
I also added the capability of doing the existing optimization with non-splatted vectors (splatted also works).
Differential Revision: http://reviews.llvm.org/D13740
llvm-svn: 251028
When we have to convert the masked.load, masked.store to scalar code, we generate a chain of conditional basic blocks.
I added optimization for constant mask vector.
Differential Revision: http://reviews.llvm.org/D13855
llvm-svn: 250893
The mask value type for maskload/maskstore GCC builtins is never a vector of
packed floats/doubles.
This patch fixes the following issues:
1. The mask argument for builtin_ia32_maskloadpd and builtin_ia32_maskstorepd
should be of type llvm_v2i64_ty and not llvm_v2f64_ty.
2. The mask argument for builtin_ia32_maskloadpd256 and
builtin_ia32_maskstorepd256 should be of type llvm_v4i64_ty and not
llvm_v4f64_ty.
3. The mask argument for builtin_ia32_maskloadps and builtin_ia32_maskstoreps
should be of type llvm_v4i32_ty and not llvm_v4f32_ty.
4. The mask argument for builtin_ia32_maskloadps256 and
builtin_ia32_maskstoreps256 should be of type llvm_v8i32_ty and not
llvm_v8f32_ty.
Differential Revision: http://reviews.llvm.org/D13776
llvm-svn: 250817
Currently, in MachineBlockPlacement pass the loop is rotated to let the best exit to be the last BB in the loop chain, to maximize the fall-through from the loop to outside. With profile data, we can determine the cost in terms of missed fall through opportunities when rotating a loop chain and select the best rotation. Basically, there are three kinds of cost to consider for each rotation:
1. The possibly missed fall through edge (if it exists) from BB out of the loop to the loop header.
2. The possibly missed fall through edges (if they exist) from the loop exits to BB out of the loop.
3. The missed fall through edge (if it exists) from the last BB to the first BB in the loop chain.
Therefore, the cost for a given rotation is the sum of costs listed above. We select the best rotation with the smallest cost. This is only for PGO mode when we have more precise edge frequencies.
Differential revision: http://reviews.llvm.org/D10717
llvm-svn: 250754
Add FastISel support for SSE4A scalar float / double non-temporal stores
Follow up to D13698
Differential Revision: http://reviews.llvm.org/D13773
llvm-svn: 250610
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
The motivation for this patch starts with PR20134:
https://llvm.org/bugs/show_bug.cgi?id=20134
void foo(int *a, int i) {
a[i] = a[i+1] + a[i+2];
}
It seems better to produce this (14 bytes):
movslq %esi, %rsi
movl 0x4(%rdi,%rsi,4), %eax
addl 0x8(%rdi,%rsi,4), %eax
movl %eax, (%rdi,%rsi,4)
Rather than this (22 bytes):
leal 0x1(%rsi), %eax
cltq
leal 0x2(%rsi), %ecx
movslq %ecx, %rcx
movl (%rdi,%rcx,4), %ecx
addl (%rdi,%rax,4), %ecx
movslq %esi, %rax
movl %ecx, (%rdi,%rax,4)
The most basic problem (the first test case in the patch combines constants) should also be fixed in InstCombine,
but it gets more complicated after that because we need to consider architecture and micro-architecture. For
example, AArch64 may not see any benefit from the more general transform because the ISA solves the sexting in
hardware. Some x86 chips may not want to replace 2 ADD insts with 1 LEA, and there's an attribute for that:
FeatureSlowLEA. But I suspect that doesn't go far enough or maybe it's not getting used when it should; I'm
also not sure if FeatureSlowLEA should also mean "slow complex addressing mode".
I see no perf differences on test-suite with this change running on AMD Jaguar, but I see small code size
improvements when building clang and the LLVM tools with the patched compiler.
A more general solution to the sext(add nsw(x, C)) problem that works for multiple targets is available
in CodeGenPrepare, but it may take quite a bit more work to get that to fire on all of the test cases that
this patch takes care of.
Differential Revision: http://reviews.llvm.org/D13757
llvm-svn: 250560
Summary:
We now use the block for the catchpad itself, rather than its normal
successor, as the funclet entry.
Putting the normal successor in the map leads downstream funclet
membership computations to erroneous results.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D13798
llvm-svn: 250552
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags. I fixed some of this issue in D13680 but had missed INC/DEC.
This patch adds the missing EFLAGS definition.
llvm-svn: 250438
Summary:
x86 codegen is clever about generating good code for relaxed
floating-point operations, but it was being silly when globals and
immediates were involved, forgetting where the global was and
loading/storing from/to the wrong place. The same applied to hard-coded
address immediates.
Don't let it forget about the displacement.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25171
A very similar bug when doing floating-points atomics to the stack is
also fixed by this patch.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25144
Reviewers: pete
Subscribers: llvm-commits, majnemer, rsmith
Differential Revision: http://reviews.llvm.org/D13749
llvm-svn: 250429
AVX-512 bit shuffle fails on 32 bit since we create a vector of 64-bit constants.
I split 8x64-bit const vector to 16x32 on 32-bit mode.
Differential Revision: http://reviews.llvm.org/D13644
llvm-svn: 250390
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250370
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250349
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250342
This patch teaches x86 fast-isel how to select nontemporal stores.
On x86, we can use MOVNTI for nontemporal stores of doublewords/quadwords.
Instructions (V)MOVNTPS/PD/DQ can be used for SSE2/AVX aligned nontemporal
vector stores.
Before this patch, fast-isel always selected 'movd/movq' instead of 'movnti'
for doubleword/quadword nontemporal stores. In the case of nontemporal stores
of aligned vectors, fast-isel always selected movaps/movapd/movdqa instead of
movntps/movntpd/movntdq.
With this patch, if we use SSE2/AVX intrinsics for nontemporal stores we now
always get the expected (V)MOVNT instructions.
The lack of fast-isel support for nontemporal stores was spotted when analyzing
the -O0 codegen for nontemporal stores.
Differential Revision: http://reviews.llvm.org/D13698
llvm-svn: 250285
Summary:
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags.
This patch adds the missing EFLAGS definition.
Floating point operations don't set flags, the subsequent fadd
optimization is therefore correct. The same applies for surrounding
load/store optimizations.
Reviewers: rsmith, rtrieu
Subscribers: llvm-commits, reames, morisset
Differential Revision: http://reviews.llvm.org/D13680
llvm-svn: 250135
When lowering invoke statement, all unwind destinations are directly added as successors of call site block, and the weight of those new edges are not assigned properly. Actually, default weight 16 are used for those edges. This patch calculates the proper edge weights for those edges when collecting all unwind destinations.
Differential revision: http://reviews.llvm.org/D13354
llvm-svn: 250119
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
This patch fixes a problem in function 'combineX86ShuffleChain' that causes a
chain of shuffles to be wrongly folded away when the combined shuffle mask has
only one element.
We may end up with a combined shuffle mask of one element as a result of
multiple calls to function 'canWidenShuffleElements()'.
Function canWidenShuffleElements attempts to simplify a shuffle mask by widening
the size of the elements being shuffled.
For every pair of shuffle indices, function canWidenShuffleElements checks if
indices refer to adjacent elements. If all pairs refer to "adjacent" elements
then the shuffle mask is safely widened. As a consequence of widening, we end up
with a new shuffle mask which is half the size of the original shuffle mask.
The byte shuffle (pshufb) from test pr24562.ll has a mask of all SM_SentinelZero
indices. Function canWidenShuffleElements would combine each pair of
SM_SentinelZero indices into a single SM_SentinelZero index. So, in a
logarithmic number of steps (4 in this case), the pshufb mask is simplified to
a mask with only one index which is equal to SM_SentinelZero.
Before this patch, function combineX86ShuffleChain wrongly assumed that a mask
of size one is always equivalent to an identity mask. So, the entire shuffle
chain was just folded away as the combined shuffle mask was treated as a no-op
mask.
With this patch we know check if the only element of a combined shuffle mask is
SM_SentinelZero. In case, we propagate a zero vector.
Differential Revision: http://reviews.llvm.org/D13364
llvm-svn: 250027
The XOP vector integer comparisons can deal with all signed/unsigned comparison cases directly and can be easily commuted as well (D7646).
llvm-svn: 249976
Also Fix a buglet where SEH tables had ranges that spanned funclets.
The remaining tests using the old landingpad IR are preparation tests,
and will be deleted along with the old preparation.
llvm-svn: 249917
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
This wasn't very observable in execution tests, because usually there is
an invoke in the catchpad that unwinds the the catchendpad but never
actually throws.
llvm-svn: 249898
Reid Kleckner