dwarf&dwo versions were doing it, but gmodules and dsym weren't. All
this function does right now is pass OS=Android to make when targeting
android. This enables us to run dotest without manually passing --env
OS=Android.
llvm-svn: 317130
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Summary:
It is not presently used, and it's quite dangerous to use -- it assumes the
integer is an osx kern_return_t, but very few of the integers we have lying
around are mach kernel error codes. The error can still be used to a
mach error using a slightly longer (but more explicit) syntax.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35305
llvm-svn: 317093
This version relies on a newer and more convenient way
to use a class to implement a command. It has been in place
since early 2015, so it should be pretty safe to use.
llvm-svn: 317043
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
The previous value was not sufficient for Pixel 2 phones. One would have
hoped that the newer phones are faster, but that does not seem to be the
case here.
llvm-svn: 316993
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Unified headers will be the only way to build applications in NDK r16,
and it also works with NDK r15.
This also bumps the minimum supported android version to 16.
llvm-svn: 316985
this test was using a single makefile to build two executables. This
setup, although not supported by Makefile.rules, happened to
work in most configurations, except when building with the android ndk
r16.
Here I move the building of the second executable to a separate
makefile, which is the solution other tests use for multiple targets.
llvm-svn: 316982
Versions of android before kitkat implemented pselect non-atomically,
which caused flakyness, as we were relying on it atomically setting the
signal mask to implement waiting for signals.
This patch implements a direct call to the the pselect kernel syscall,
which does not suffer from this problem. The code itself is not very
pretty, but fortunately the uglyness is contained in the
android version of the MainLoop::RunImpl::Poll function.
llvm-svn: 316915
UriParser::Parse is returning a StringRef pointing the the parsed
string, but we were calling it with a temporary string. Change this to a
local variable to make sure the string persists as long as we need it.
llvm-svn: 316740
Summary:
Using the in-tree clang should be the default test configuration as that
is the one compiler that we can be sure everyone has (better
reproducibility of test results). Also, it should hopefully reduce the
impact of pr35040.
This also reduces the number of settings which control the compiler
used. LLDB_TEST_C_COMPILER is used for C files and
LLDB_TEST_CXX_COMPILER for C++ files. Both of the settings default to
the in-tree clang.
Reviewers: zturner
Subscribers: mgorny, davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D39215
llvm-svn: 316728
The test was asserting that we can only find one frame in the minidump.
Now that we have the default unwind plan from the ABI plugin, we are
able to find 5 more frames using the frame pointer chaining. Correct the
expectation in the test.
llvm-svn: 316688
Summary:
This matches other SysV ABIs that are different on Apple and non-Apple targets,
like `ABISysV_arm.cpp` for instance.
Reviewers: clayborg, emaste
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39335
llvm-svn: 316673
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
The commit breaks the case where you specify just a filename to the
compiler. Previously, it would look up the compiler in your path, now it
complains that the compiler is not found. One of the lldb buildbots is
depending on this. It seems like a nice feature to have, as it means
less typing and being able to avoid hard-coding the system compiler path
in the bot config.
This reverts commit r316393.
llvm-svn: 316451
If you pass an invalid compiler/debugger path on the cmdline to `dotest.py` this is what you get.
Traceback (most recent call last):
[...]
File "dotest.py", line 7, in <module>
lldbsuite.test.run_suite()
[...]
And with the patch applied:
/home/davide/work/build-lldb/bin/clandasfasg is not a valid path, exiting
Differential Revision: https://reviews.llvm.org/D39199
llvm-svn: 316393
Since the ipv6 patch, we've experienced occasional flakyness in
lldb-server tests. This was due to the fact that lldb-server was trying
to listen on both v4 and v6 localhost sockets (and consider it a success
if at least one of them succeeded), while the test framework was only
trying to connect to the v4 one.
This change makes sure lldb-server only listens on the v4 socket.
llvm-svn: 316391
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to disable logging in the forked child.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316368
Summary:
Without this, the launching of the test inferior may fail if it depends
on some component of the environment (most likely LD_LIBRARY_PATH). This
makes sure we propagate the environment variable to the inferior
process.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39010
llvm-svn: 316244
The pthread_atfork trick breaks on android, because
pthread_rwlock_unlock detects that it is not the same thread which
locked the lock. This means that the subsequent lock attempt will still
deadlock (only this time it happens deterministically instead of at
random). Reverting to find a better solution.
This reverts commit r316173.
llvm-svn: 316231
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to make sure noone is writing a log
message while we are forking.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316173
Summary:
This adds support for running the lldb-server test suite (currently consisting
of only one test) against the debugserver. Currently, the choice which binary
to test is based on the host system. This will need to be replaced by something
more elaborate if/when lldb-server starts supporting debugging on darwin.
I need to make a couple of tweaks to the test client to work with debugserver:
- debugserver has different command-line arguments - launching code adjusted to
handle that
- debugserver sends duplicate "medata" fields in the stop reply packet -
adjusted stop-reply parsing code to handle that
- debugserver replies to the k packet instead of just dropping the connection -
stopping code adjusted, although we should probably consider aligning the
behavior of the two stubs in this case
Reviewers: jmajors, beanz
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D35311
llvm-svn: 316010
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
* Prevent dumping of characters in DumpDataExtractor() with
item_byte_size bigger than 8 bytes. This case is not supported by the
code and results in a crash because the code calls
DataExtractor::GetMaxU64Bitfield() -> GetMaxU64() that asserts for
byte size > 8 bytes.
* Teach DataExtractor::GetMaxU64(), GetMaxU32(), GetMaxS64() and
GetMaxU64_unchecked() how to handle byte sizes that are not a multiple
of 2. This allows DumpDataExtractor() to dump characters and booleans
with item_byte_size in the interval of [1, 8] bytes. Values that are
not a multiple of 2 would previously result in a crash because they
were not handled by GetMaxU64().
llvm-svn: 315444
Previously LLDB required the DWP file
to be located next to the executable file.
This diff uses the helper function
Symbols::LocateExecutableSymbolFile to search for
DWP files in the standard locations for debug symbols.
Test plan:
Build a toy test example:
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
mkdir -p debug_symbols
mv main.exe.dwp debug_symbols/main.exe.dwp
Run lldb:
lldb
settings set target.debug-file-search-paths ./debug_symbols
file ./main.exe
br set --name f
run
Check that debugging works:
setting breakpoints, printing local variables.
Differential revision: https://reviews.llvm.org/D38568
llvm-svn: 315387
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
Summary:
While the specification says that the 64bit registers are prefixed with
`x`, it seems that many people still use `r`. Until recently, we had been using
the `r` prefix instead of the `x` prefix in ds2. This caused lldb to fail during
unwinding. I think it's reasonable to check for a register prefixed with `r`,
since some people still choose to use `r`.
Reviewers: sas, fjricci, clayborg
Reviewed By: sas, clayborg
Subscribers: aemerson, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38376
Change by Alex Langford <apl@fb.com>
llvm-svn: 315221
"Prepare Swig Bindings" shell script phase; it
wasn't the actual input file and could lead
to incorrect dependency analysis by the build
system.
<rdar://problem/34751196>
llvm-svn: 315135
This behaves like the other *_INCLUDE_TESTS variables in CMake and is tied to LLVM_INCLUDE_TESTS so that if you're building in-tree and not building the LLVM tests, you also won't build the LLDB tests.
llvm-svn: 315120
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
When the expression parser does name resolution for local
variables in C++ closures it doesn't give the local name
priority over other global symbols of the same name. heap.py
uses "info" which is a fairly common name, and so the commands
in it fail. This is a workaround, just use lldb_info not info.
<rdar://problem/34026140>
llvm-svn: 314959
Sometimes you want to step along and print a local each time as you go.
You can do that with stop hooks, but that's a little heavy-weight. This
is a sketch of a command that steps and then does "frame variable" on all
its arguments.
llvm-svn: 314958
Neither LLDB_CONFIGURATION_DEBUG nor LLDB_CONFIGURATION_RELEASE were ever set in the CMake LLDB project.
Also cleaned up a questionable #ifdef in SharingPtr.h, removing all the references to LLDB_CONFIGURATION_BUILD_AND_INTEGRATION in the process.
Differential Revision: https://reviews.llvm.org/D38552
llvm-svn: 314929
Summary:
At present, several gtests in the lldb open source codebase are using
#include statements rooted at $(SOURCE_ROOT)/${LLDB_PROJECT_ROOT}.
This patch cleans up this directory/include structure for both CMake and
Xcode build systems.
rdar://problem/33835795
Reviewers: zturner, jingham, beanz
Reviewed By: beanz
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D36598
llvm-svn: 314849
SymbolFileDWARFDwp contains m_debug_cu_index_map which was previously
initialized incorrectly: before m_debug_cu_index.parse
is called m_debug_cu_index is empty, thus
the map was not actually getting populated properly.
This diff moves this step into a private helper method
and calls it after m_debug_cu_index.parse inside SymbolFileDWARFDwp::Create.
Test plan:
Build a toy test example
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
Build LLDB with ENABLE_DEBUG_PRINTF set.
Run: lldb -- ./main.exe
Check that the indexes are now correct
(before this change they were empty)
Check that debugging works
(setting breakpoints, printing local variables (this was not working before))
Differential revision: http://reviews.llvm.org/D38492
llvm-svn: 314832
FreeBSD kernel modules are actually relocatable (.o) ELF files and this
previously caused some issues for LLDB. This change addresses these when
using lldb to symbolicate FreeBSD kernel backtraces.
The major problems:
- Relocations were not being applied to the DWARF debug info despite
there being code to do this. Several issues prevented it from working:
- Relocations are computed at the same time as the symbol table, but
in the case of split debug files, symbol table parsing always
redirects to the primary object file, meaning that relocations would
never be applied in the debug file.
- There's actually no guarantee that the symbol table has been parsed
yet when trying to parse debug information.
- When actually applying relocations, it will segfault because the
object files are not mapped with MAP_PRIVATE and PROT_WRITE.
- LLDB returned invalid results when performing ordinary address-to-
symbol resolution. It turned out that the addresses specified in the
section headers were all 0, so LLDB believed all the sections had
overlapping "file addresses" and would sometimes return a symbol from
the wrong section.
Patch by Brian Koropoff
Differential Revision: https://reviews.llvm.org/D38142
llvm-svn: 314672
This setting can be enabled like this at the target level:
(lldb) settings set target.experimental.use-modern-type-lookup true
This causes several new behaviors in the Clang expression parser:
- It completely disables use of ClangASTImporter. None are created
at all, and all users of it are now conditionalized on its
presence.
- It instead constructs a per-expression ExternalASTMerger, which
exists inside Clang and contains much of the type completion
logic that hitherto lived in ExternalASTSource,
ClangExpressionDeclMap, and ClangASTImporter.
- The expression parser uses this Merger as a backend for copying
and completing types.
- It also constructs a persistent ExternalASTMerger which is
connected to the Target's persistent AST context.
This is a major chunk of LLDB functionality moved into Clang. It
can be tested in two ways:
1. For an individual debug session, enable the setting before
running a target.
2. For the testsuite, change the option to be default-true. This
is done in Target.cpp's g_experimental_properties. The
testsuite is not yet clean with this, so I have not committed
that switch.
I have filed a Bugzilla for extending the testsuite to allow
custom settings for all tests:
https://bugs.llvm.org/show_bug.cgi?id=34771
I have also filed a Bugzilla for fixing the remaining testsuite
failures with this setting enabled:
https://bugs.llvm.org/show_bug.cgi?id=34772
llvm-svn: 314458
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
stack pointer for apple's armv7 ABI. When in a frameless function
or in a prologue/epilogue where sp wasn't properly aligned, we could
try to make function calls with an unaligned sp; the expression
would crash.
llvm-svn: 314265
The IR dynamic checks are self-contained functions whose job is to
- verify that pointers referenced in an expression are valid at runtime; and
- verify that selectors sent to Objective-C objects by an expression are
actually supported by that object.
These dynamic checks forward-declare all the functions they use and should not
require any external debug information. The way they ensure this is by marking
all the names they use with a dollar sign ($). The expression parser recognizes
such symbols and perform no lookups for them.
This patch fixes three issues surrounding the use of the dollar sign:
- to fix a MIPS issue, the name of the pointer checker was changed from
starting with $ to starting with _$, but this was not properly ignored; and
- the Objective-C object checker used a temporary variable that did not start
with $.
- the Objective-C object checker used an externally-defined struct (struct
objc_selector) but didn't need to.
The patch also implements some cleanup in the area:
- it reformats the string containing the Objective-C object checker,
which was mangled horribly when the code was transformed to a uniform width
of 80 columns, and
- it factors out the logic for ignoring global $-symbols into common code
shared between ClangASTSource and ClangExpressionDeclMap.
Differential Revision: https://reviews.llvm.org/D38153
llvm-svn: 314225
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Using TCP sockets is insecure against local attackers, and possibly
against remote attackers too (some vulnerabilities may allow tricking a
browser to make a request to localhost). Use socketpair (which is immune
to such attacks) on all Unix platforms.
Patch by Demi Marie Obenour < demiobenour@gmail.com >
Differential Revision: https://reviews.llvm.org/D33213
llvm-svn: 314127
Summary:
This is required to be able to step through calls to external functions
that are not properly marked with __declspec(dllimport). When a call
like this is emitted, the linker will inject a trampoline to produce an
indirect call through the IAT.
Reviewers: zturner, jingham
Reviewed By: jingham
Subscribers: sas, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D22231
llvm-svn: 314045
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
1. Fix a data race (g_interrupt_sent flag usage was not thread safe, signals
can be handled on arbitrary threads)
2. exit() is not signal-safe, replaced it with the signal-safe equivalent
_exit()
(This differs from the patch on Phabrictor because I had to add
`#include <atomic>` to get the definition of `std::atomic_flag`.)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37926
llvm-svn: 313785
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313537
On Linux lldb-server sends an OK response to qfThreadInfo if no process
is started yet. I don't know why would LLDB issue a qfThreadInfo packet
before starting a process but creating a fake thread ID in case of an
OK or Error respoinse sounds bad anyway so lets not do it.
llvm-svn: 313525
OpenOCD sends register classes as two separate <feature> nodes, fixed parser to process both of them.
OpenOCD returns "l" in response to "qfThreadInfo", so IsUnsupportedResponse() was false and we were ending up without any threads in the process. I think it's reasonable to assume that there's always at least one thread.
llvm-svn: 313442
This is a resubmission of r313270. It broke standalone builds of
compiler-rt because we were not correctly generating the llvm-lit
script in the standalone build directory.
The fixes incorporated here attempt to find llvm/utils/llvm-lit
from the source tree returned by llvm-config. If present, it
will generate llvm-lit into the output directory. Regardless,
the user can specify -DLLVM_EXTERNAL_LIT to point to a specific
lit.py on their file system. This supports the use case of
someone installing lit via a package manager. If it cannot find
a source tree, and -DLLVM_EXTERNAL_LIT is either unspecified or
invalid, then we print a warning that tests will not be able
to run.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313407
This patch is still breaking several multi-stage compiler-rt bots.
I already know what the fix is, but I want to get the bots green
for now and then try re-applying in the morning.
llvm-svn: 313335
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
When LLDB loads "external" modules it looks at the
presence of DW_AT_GNU_dwo_name.
However, when the already created module
(corresponding to .dwo itself) is being processed,
it will see the presence of DW_AT_GNU_dwo_name
(which contains the name of dwo file) and
will try to call ModuleList::GetSharedModule again.
In some cases (i.e. for empty files) Clang 4.0
generates a *.dwo file which has DW_AT_GNU_dwo_name,
but no DW_AT_comp_dir. In this case the method
ModuleList::GetSharedModule will fail and
the warning will be printed. To workaround this issue,
one can notice that in this case we don't actually need
to try to load the already loaded module (corresponding to .dwo).
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D37295
llvm-svn: 313083
A clang change caused the inclusion of `llvm::Type` and
`lldb_private::Type` to be pulled into the global namespace due to the
`using namespace llvm;` and `using namespace lldb_private;`. Explicitly
qualify the `Type` to resolve the ambiguity. NFC
llvm-svn: 312841
Even though the content of the minidump does not change in a debugging session,
frames can't be indiscriminately be cached since modules and symbols can be
explicitly added after the minidump is loaded.
The fix is simple, just let the base Thread::ClearStackFrames() do its job.
submitted by amccarth on behalf of lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34510
Differential Revision: https://reviews.llvm.org/D37527
llvm-svn: 312735
Summary:
Test was skipped because -data-evaluate-expression was thought
to not work on globals. This is not the case - the issue was clang
removes debug info for globals in cpp files that are not used.
Add a reference to the globals in question, and fix memory patter in
test to match memory pattern in testcase.
Reviewers: ki.stfu, abidh
Reviewed By: ki.stfu
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D37533
llvm-svn: 312726
Turns out WITH_LOCKDOWN define changes the struct layout and constructor implementation for RNBSocket which is used in debugserver.cpp, so we need to make sure this is consistent.
In the future we should change WITH_LOCKDOWN to be configured in a generated header, but for now we can just set it correctly.
<rdar://problem/33900552>
llvm-svn: 312666
The goal of this patch is twofold:
First, it removes a wrong comment (at least, not correctly describing
what the function does).
Then, it rewrites the function to use a StringSwitch where the
registers are enumerated explicitly instead of being computed
programmatically. Other than being much shorter, it's much easier to
read (and given the ABI won't change anytime soon, I don't think
there's need to generalize).
While here, I added an assert that the register name is always empty,
as the previous implementation of the function assumed so.
Differential Revision: https://reviews.llvm.org/D37420
llvm-svn: 312501
attach by pid worked when running from the directory from which the
target was launched, but failed from a different directory. Use the
kern.proc.pathname sysctl to locate the target, falling back to the
original case of the target's argv[0] if that fails. Based on a patch
from Vignesh Balu.
Differential Revision: https://reviews.llvm.org/D32271
llvm-svn: 312430
Summary:
-var-update calls CMICmdCmdVarUpdate::ExamineSBValueForChange to check if a varObj has been updated. It checks that the varObj is updated, then recurses on all of its children. If a child is a pointer pointing back to a parent node, this will result in an infinite loop, and lldb-mi hanging.
The problem is exposed by packages/Python/lldbsuite/test/tools/lldb-mi/variable/TestMiVar.py, but this test is skipped everywhere.
This patch changes ExamineSBValueForChange to not traverse children of varObjs that are pointers.
Reviewers: ki.stfu, zturner, clayborg, abidh
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37154
llvm-svn: 312270
The socket bind address should either be localhost or anyaddress. This bug in the listen behavior was preventing lldb-server from opening sockets for non-localhost connections.
The added test verifies that opening an anyaddress socket works and has a non-zero port assignment.
This should resolve PR34183.
llvm-svn: 312008
Summary:
The DWP (DWARF package) format is used to pack multiple dwo files
generated by split-dwarf into a single ELF file to make distributing
them easier. It is part of the DWARFv5 spec and can be generated by
dwp or llvm-dwp from a set of dwo files.
Caviats:
* Only the new version of the dwp format is supported (v2 in GNU
numbering schema and v5 in the DWARF spec). The old version (v1) is
already deprecated but binutils 2.24 still generates that one.
* Combining DWP files with module debugging is not yet supported.
Subscribers: emaste, mgorny, aprantl
Differential Revision: https://reviews.llvm.org/D36062
llvm-svn: 311775
to match the changes Saleem Abdulrasool committed in r311579. Fixes
a testsuite failure now that the testsuite expects a 16 bit return
value for thsi reg.
llvm-svn: 311627
in a dSYM, and it's a version 2 DBGSourcePathRemapping,
in addition to the build/source paths specified, add
build/source paths with the last two filename components
removed. This more generic remapping can sometimes
help lldb to find the correct source file in complex
projects.
<rdar://problem/33973545>
llvm-svn: 311622
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
The Process/gdb-remote test now requires the LLVMTestingSupport library
that is not installed by LLVM. As a result, when doing an out-of-source
build it fails being unable to find the library. To solve that, build
a local copy of the library when building LLDB with unittests and LLVM
sources available. This is based on how we deal with bundled gtest
sources.
Differential Revision: https://reviews.llvm.org/D36886
llvm-svn: 311355
Add explicit linkage to the necessary system libraries in the Host
library. Otherwise, the library fails to build with -Wl,--as-needed.
The system libraries ended up being listed on the linker command-line
before the static libraries needing them, resulting in --as-needed
stripping them.
Listing the dependent libraries explicitly is the canonical way of
declaring libraries in CMake. It guarantees that the system library
dependencies will be correctly propagated to reverse dependencies.
The code used to link libraries reuses existing EXTRA_LIBS variable,
copying code from other parts of LLDB. We might eventually remove
the direct use of system libraries in the programs; however, I would
prefer if we focused on fixing the build regressions in 5.0 branch
first, and went further after the release.
Differential Revision: https://reviews.llvm.org/D36885
llvm-svn: 311354
"Prevent negative chars from being sign-extended into isprint and isspace which take and int and crash if the int is negative"
https://reviews.llvm.org/D36620
llvm-svn: 311207
The Core library calls functions provided by the curses library. Add
an appropriate explicit LINK_LIBS to ${CURSES_LIBRARIES} to propagate
the dependency correctly within the build system.
It seems that so far the linkage was handled by some kind of implicit
magic LLDB_SYSTEM_LIBS variable. However, it stopped working for
unittests as the curses libraries are passed before the LLDBCore
library, resulting in `-Wl,--as-needed` stripping the yet-unused library
before it is required by LLDBCore, and effectively breaking the build.
I think it's better to focus on listing all the dependencies explicitly
and let CMake propagate them rather than trying to figure out why this
hack stopped working.
This is also more consistent with LLVM where the curses linkage
in LLVMSupport is expressed directly in the library rather than deferred
to the final programs.
Differential Revision: https://reviews.llvm.org/D36358
llvm-svn: 311122
* Enable i386 ABI creation for freebsd
* Added an extra argument in ABISysV_i386::PrepareTrivialCall for mmap
syscall
* Unlike linux, the last argument of mmap is actually 64-bit(off_t).
This requires us to push an additional word for the higher order bits.
* Prior to this change, ktrace dump will show mmap failures due to
invalid argument coming from the 6th mmap argument.
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D34776
llvm-svn: 311002
It was completly unused and broke the part of the encapsulation that
common code shouldn't depend on specific plugins or language specific
features.
llvm-svn: 311000
To detect the correct function name based on the list of available symbols instead of the SDK version
Reviewers: tberghammer, clayborg
Subscribers: jaydeep, bhushan, lldb-commits
Differential Revision: https://reviews.llvm.org/D36445
llvm-svn: 310856
The Linux xfail decorator was removed in r272326 with the claim that the
test "runs reliably on the linux x86 buildbot." It also runs reliably on
FreeBSD for me.
llvm.org/pr25925
llvm-svn: 310644
This test is consistently reporting unexpected pass for me on FreeBSD
10 and 12. It was failing on the old FreeBSD buildbot which has now been
retired for some time. Will investigate further if this fails once a new
buildbot is configured and running tests.
llvm.org/pr17807
llvm-svn: 310626
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The EncodingError test ensures that trying to encode a multibyte wchar
with a given codepage fails. If setlocale() fails, the encoding is
performed using the current locale, which may or may not fail.
This patch asserts that both setlocale() operations are successful, as
well as falling back to a widely available unibyte encoding for
non-Windows systems.
<rdar://problem/33782806>
Reviewers: zturner, labath, lhames
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D36496
llvm-svn: 310499
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
Summary:
This adds gtest test files to the Xcode project which were
previously only in the cmake config. This is the first of several
planned merges.
Reviewers: beanz, spyffe, jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D36485
llvm-svn: 310417
-- 2 files were missing in this commit which should have been there.
These files were submitted initially for review and were reviewed.
However, while updating the revision with newer diffs, I accidentally
forgot to include them in newer diffs. So commiting now.
llvm-svn: 310341
Summary:
1. Provide single library for all Intel specific hardware features instead
of individual libraries for each feature
2. Added Intel(R) Processor Trace hardware feature in this single library.
Details about the tool implementing this feature is as follows:
Tool developed on top of LLDB to provide its users the execution
trace of the debugged inferiors. Tool's API are exposed as C++ object
oriented interface in a shared library. API are designed especially to be
easily integrable with IDEs providing LLDB as an application debugger.
Entire API is also available as Python functions through a script bridging
interface allowing development of python modules.
This patch also provides a CLI wrapper to use the Tool through LLDB's command
line. Highlights of the Tool and the wrapper are given below:
******************************
Intel(R) Processor Trace Tool:
******************************
- Provides execution trace of the debugged application
- Uses Intel(R) Processor Trace hardware feature (already implemented inside LLDB)
for this purpose
-- Collects trace packets generated by this feature from LLDB, decodes and
post-processes them
-- Constructs the execution trace of the application
-- Presents execution trace as a list of assembly instructions
- Provides 4 APIs (exposed as C++ object oriented interface)
-- start trace with configuration options for a thread/process,
-- stop trace for a thread/process,
-- get the execution flow (assembly instructions) for a thread,
-- get trace specific information for a thread
- Easily integrable into IDEs providing LLDB as application debugger
- Entire API available as Python functions through script bridging interface
-- Allows developing python apps on top of Tool
- README_TOOL.txt provides more details about the Tool, its dependencies, building
steps and API usage
- Tool ready to use through LLDB's command line
-- CLI wrapper has been developed on top of the Tool for this purpose
*********************************
CLI wrapper: cli-wrapper-pt.cpp
*********************************
- Provides 4 commands (syntax similar to LLDB's CLI commands):
-- processor-trace start
-- processor-trace stop
-- processor-trace show-trace-options
-- processor-trace show-instr-log
- README_CLI.txt provides more details about commands and their options
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, jingham, lldb-commits, labath
Reviewed By: clayborg
Subscribers: ravitheja, emaste, krytarowski, mgorny
Differential Revision: https://reviews.llvm.org/D33035
llvm-svn: 310261
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
- Don't do any checks of the current SCM repository if the
llvm repositories are already there. Useful for bots.
- When symlinking, remove old symlinks.
- Support loading build-script as a library, not necessarily
under Xcode.
- Stringify args before passing them to subprocess.
llvm-svn: 309631
Current LLDB (that is without DWZ support) crashes accessing Fedora debug info:
READ of size 8 at 0x60200000ffc8 thread T0
#0 in DWARFDebugInfoEntry::BuildAddressRangeTable(SymbolFileDWARF*, DWARFCompileUnit const*, DWARFDebugAranges*) const tools/lldb/source/Plugins/SymbolFile/DWARF/DWARFDebugInfoEntry.cpp:1336
Greg Clayton: We will need a warning to be emitted in
SymbolFileDWARF::CalculateAbilities() stating we won't parse the DWARF due to
"unsupported DW_FORM value of 0x1f20".
Patch has been mostly written by Greg Clayton.
Differential revision: https://reviews.llvm.org/D35622
llvm-svn: 309581
Summary:
Clang recently started to emit base address entries into the
.debug_ranges section to reduce the number of relocations needed. Lets
make sure LLDB can read them.
llvm-svn: 309554
Davide Italiano