Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma
Reviewed By: efriedma
Subscribers: john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
The VCMP instructions in MVE can accept a register or ZR, but only as
the right hand operator. Most of the time this will already be correct
because the icmp will have been canonicalised that way already. There
are some cases in the lowering of float conditions that this will not
apply to though. This code should fix up those cases.
Differential Revision: https://reviews.llvm.org/D70822
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
Extend the describeLoadedValue() with support for target specific ARM and
AArch64 instructions interpretation. The patch provides specialization for
ADD and SUB operations that include a register and an immediate/offset
operand. Some of the instructions can operate with global string addresses
or constant pool indexes but such cases are omitted since we currently lack
flexible support for processing such operands at DWARF production stage.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D67556
Currently, the heuristics the if-conversion pass uses for diamond if-conversion
are based on execution time, with no consideration for code size. This adds a
new set of heuristics to be used when optimising for code size.
This is mostly target-independent, because the if-conversion pass can
see the code size of the instructions which it is removing. For thumb,
there are a few passes (insertion of IT instructions, selection of
narrow branches, and selection of CBZ instructions) which are run after
if conversion and affect these heuristics, so I've added target hooks to
better predict the code-size effect of a proposed if-conversion.
Differential revision: https://reviews.llvm.org/D67350
llvm-svn: 374301
The static analyzer is warning about potential null dereferences, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 372992
We should not be generating Neon stack loads/stores even for these large
registers.
No test here because my understanding is we will only generate these QQPR regs
for intrinsics and VLDn's. The tests will follow once those are available.
Differential revision: https://reviews.llvm.org/D67169
llvm-svn: 371386
This moves ConstantMaterializationCost into ARMBaseInstrInfo so that it can
also be used in ISel Lowering, adding codesize values to the computed costs, to
be able to compare either approximate instruction counts or codesize costs.
It also adds a HasLowerConstantMaterializationCost, which compares the
ConstantMaterializationCost of two values, returning true if the first is
smaller either in instruction count/codesize, or falling back to the other in
the case that they are equal.
This is used in constant CSEL lowering to invert the predicate if the opposite
is easier to materialise.
Differential revision: https://reviews.llvm.org/D66701
llvm-svn: 370741
Arm 8.1-M adds a number of related CSEL instructions, including CSINC, CSNEG and CSINV. These choose between two values given the content in CPSR and a condition, performing an increment, negation or inverse of the false value.
This adds some selection for them, either from constant values or patterns. It does not include CSEL directly, which is currently not always making code better. It is still useful, but we will have to check more carefully where it should and shouldn't be used.
Code by Ranjeet Singh and Simon Tatham, with some modifications from me.
Differential revision: https://reviews.llvm.org/D66483
llvm-svn: 370739
To save a 'add sp,#val' instruction by adding registers to the final pop instruction,
the first register transferred by this pop instruction need to be found.
If the function to be optimized has a non-void return value, the operand list contains
r0 (implicit) which prevents the optimization to take place.
Therefore implicit register references should be skipped in the search loop,
because this registers are never popped from the stack.
Patch by Rainer Herbertz (rOptimizer)!
Differential revision: https://reviews.llvm.org/D66730
llvm-svn: 370728
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
This is extremely specific, but saves three instructions when it's
legal. I don't think the code can be usefully generalized.
Differential Revision: https://reviews.llvm.org/D65351
llvm-svn: 367492
The code to generate register move instructions in and out of VPR and
FPSCR_NZCV had assertions checking that the other register involved
was a GPR _pair_, instead of a single GPR as it should have been.
Reviewers: miyuki, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63865
llvm-svn: 364534
This provides the low-level support to start using MVE vector types in
LLVM IR, loading and storing them, passing them to __asm__ statements
containing hand-written MVE vector instructions, and *if* you have the
hard-float ABI turned on, using them as function parameters.
(In the soft-float ABI, vector types are passed in integer registers,
and combining all those 32-bit integers into a q-reg requires support
for selection DAG nodes like insert_vector_elt and build_vector which
aren't implemented yet for MVE. In fact I've also had to add
`arm_aapcs_vfpcc` to a couple of existing tests to avoid that
problem.)
Specifically, this commit adds support for:
* spills, reloads and register moves for MVE vector registers
* ditto for the VPT predication mask that lives in VPR.P0
* make all the MVE vector types legal in ISel, and provide selection
DAG patterns for BITCAST, LOAD and STORE
* make loads and stores of scalar FP types conditional on
`hasFPRegs()` rather than `hasVFP2Base()`. As a result a few
existing tests needed their llc command lines updating to use
`-mattr=-fpregs` as their method of turning off all hardware FP
support.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60708
llvm-svn: 364329
This adds the rest of the vector memory access instructions. It
includes contiguous loads/stores, with an ordinary addressing mode
such as [r0,#offset] (plus writeback variants); gather loads and
scatter stores with a scalar base address register and a vector of
offsets from it (written [r0,q1] or similar); and gather/scatters with
a vector of base addresses (written [q0,#offset], again with
writeback). Additionally, some of the loads can widen each loaded
value into a larger vector lane, and the corresponding stores narrow
them again.
To implement these, we also have to add the addressing modes they
need. Also, in AsmParser, the `isMem` query function now has
subqueries `isGPRMem` and `isMVEMem`, according to which kind of base
register is used by a given memory access operand.
I've also had to add an extra check in `checkTargetMatchPredicate` in
the AsmParser, without which our last-minute check of `rGPR` register
operands against SP and PC was failing an assertion because Tablegen
had inserted an immediate 0 in place of one of a pair of tied register
operands. (This matches the way the corresponding check for `MCK_rGPR`
in `validateTargetOperandClass` is guarded.) Apparently the MVE load
instructions were the first to have ever triggered this assertion, but
I think only because they were the first to have a combination of the
usual Arm pre/post writeback system and the `rGPR` class in particular.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62680
llvm-svn: 364291
Summary:
When identifing instructions that can be folded into a MOVCC instruction,
checking for a predicate operand is not enough, also need to check for
thumb2 function, with restrict-IT, is the machine instruction eligible for
ARMv8 IT or not.
Notes in ARMv8-A Architecture Reference Manual, section "Partial deprecation of IT"
https://usermanual.wiki/Pdf/ARM20Architecture20Reference20ManualARMv8.1667877052.pdf
"ARMv8-A deprecates some uses of the T32 IT instruction. All uses of IT that apply to
instructions other than a single subsequent 16-bit instruction from a restricted set
are deprecated, as are explicit references to the PC within that single 16-bit
instruction. This permits the non-deprecated forms of IT and subsequent instructions
to be treated as a single 32-bit conditional instruction."
Reviewers: efriedma, lebedev.ri, t.p.northover, jmolloy, aemerson, compnerd, stoklund, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63474
llvm-svn: 363739
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
Those two subtarget features were awkward because their semantics are
reversed: each one indicates the _lack_ of support for something in
the architecture, rather than the presence. As a consequence, you
don't get the behavior you want if you combine two sets of feature
bits.
Each SubtargetFeature for an FP architecture version now comes in four
versions, one for each combination of those options. So you can still
say (for example) '+vfp2' in a feature string and it will mean what
it's always meant, but there's a new string '+vfp2d16sp' meaning the
version without those extra options.
A lot of this change is just mechanically replacing positive checks
for the old features with negative checks for the new ones. But one
more interesting change is that I've rearranged getFPUFeatures() so
that the main FPU feature is appended to the output list *before*
rather than after the features derived from the Restriction field, so
that -fp64 and -d32 can override defaults added by the main feature.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: srhines, javed.absar, eraman, kristof.beyls, hiraditya, zzheng, Petar.Avramovic, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60691
llvm-svn: 361845
Summary:
We were observing failures for arm32 allyesconfigs of the Linux kernel
with the asm goto Clang patch, where ldr's were being generated to
offsets too far away to encode in imm12.
It looks like since INLINEASM_BR was created off of INLINEASM, a few
checks for INLINEASM needed to be updated to check for either case.
pr/41999
Link: https://github.com/ClangBuiltLinux/linux/issues/490
Reviewers: peter.smith, kristof.beyls, ostannard, rengolin, t.p.northover
Reviewed By: peter.smith
Subscribers: jyu2, javed.absar, hiraditya, llvm-commits, nathanchance, craig.topper, kees, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62400
llvm-svn: 361659
The check for creating CBZ in constant island pass recently obtained the
ability to search backwards to find a Cmp instruction. The code in IfCvt should
mirror this to allow more conversions to the smaller form. The common code has
been pulled out into a separate function to be shared between the two places.
Differential Revision: https://reviews.llvm.org/D60090
llvm-svn: 358977
Ifcvt can replicate instructions as it converts them to be predicated. This
stops that from happening on thumb2 targets at minsize where an extra IT
instruction is likely needed.
Differential Revision: https://reviews.llvm.org/D60089
llvm-svn: 358974
It's a little tricky to make this issue show up because
prologue/epilogue emission normally likes to push at least two
registers... but it doesn't when lr is force-spilled due to function
length. Not sure if that really makes sense, but I decided not to touch
it for now.
Differential Revision: https://reviews.llvm.org/D59385
llvm-svn: 357436
ARMBaseInstrInfo::getNumLDMAddresses is making bad assumptions about the
memory operands of load and store-multiple operations. This doesn't
really fix the problem properly, but it's enough to prevent crashing,
at least.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41231 .
Differential Revision: https://reviews.llvm.org/D59834
llvm-svn: 357109
This should hopefully lead to minor improvements in code generation, and
more accurate spill/reload comments in assembly.
Also fix isLoadFromStackSlotPostFE/isStoreToStackSlotPostFE so they
don't lead to misleading assembly comments for merged memory operands;
this is technically orthogonal, but in practice the relevant memory
operand lists don't show up without this change.
Differential Revision: https://reviews.llvm.org/D59713
llvm-svn: 356963
In r322972/r323136, the iteration here was changed to catch cases at the
beginning of a basic block... but we accidentally deleted an important
safety check. Restore that check to the way it was.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41116
Differential Revision: https://reviews.llvm.org/D59680
llvm-svn: 356809
tMOVr and tPUSH/tPOP/tPOP_RET have register constraints which can't be
expressed in TableGen, so check them explicitly. I've unfortunately run
into issues with both of these recently; hopefully this saves some time
for someone else in the future.
Differential Revision: https://reviews.llvm.org/D59383
llvm-svn: 356303
This adds a few extra Thumb1 opcodes to improve the peephole opimisers
ability to remove redundant cmp instructions. tADC and tSBC require
a small fixup to prevent MOVS being moved past the instruction, giving
the wrong flags.
Differential Revision: https://reviews.llvm.org/D58281
llvm-svn: 354791
This adds a number of missing Thumb1 opcodes so that the peephole optimiser can
remove redundant CMP instructions.
Reapplying this after the first attempt broke non-thumb1 code as the t2ADDri
instruction can be used with frame indices. In thumb1 we use tADDframe.
Differential Revision: https://reviews.llvm.org/D57833
llvm-svn: 354667
This adds a number of missing Thumb1 opcodes so that the peephole optimiser can
remove redundant CMP instructions.
Differential Revision: https://reviews.llvm.org/D57833
llvm-svn: 354564
The Arm peephole optimiser code keeps track of both an MI and a SubAdd that can
be used to optimise away a CMP. In the rare case that both are found and not
ruled-out as valid, we could end up setting the flags on the wrong one.
Instead make sure we are using SubAdd if it exists, as it will be closer to the
CMP.
The testcase here is a little theoretical, with a dead def of cpsr. It should
hopefully show the point.
Differential Revision: https://reviews.llvm.org/D58176
llvm-svn: 354018
In many places in the backend, we like to know whether we're
optimising for code size and this is performed by checking the
current machine function attributes. A subtarget is created on a
per-function basis, so it's possible to know when we're compiling for
code size on construction so record this in the new object.
Differential Revision: https://reviews.llvm.org/D57812
llvm-svn: 353501
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Shows up rarely for 64-bit arithmetic, more frequently for the compare
patterns added in r325323.
Differential Revision: https://reviews.llvm.org/D53848
llvm-svn: 345782
The "dead" markings allow existing target-independent optimizations,
like MachineSink, to trigger more frequently. The CPSR defs would have
eventually been marked dead by LiveVariables, so this only affects
optimizations before regalloc.
The ARMBaseInstrInfo.cpp change is fixing a bug which is only visible
with this change: the transform adds a use to an otherwise dead def
of CPSR. This is covered by existing regression tests.
thumb2-tbh.ll breaks for Thumb1 due to MachineLICM changing the
generated code; I'll fix it in D53452.
Differential Revision: https://reviews.llvm.org/D53453
llvm-svn: 345420
When deciding if it is safe to optimize a conditional branch to a CBZ or
CBNZ the offsets of the BasicBlocks from the start of the function are
estimated. For inline assembly the generic getInlineAsmLength() function is
used to get a worst case estimate of the inline assembly by multiplying the
number of instructions by the max instruction size of 4 bytes. This
unfortunately doesn't take into account the generation of Thumb implicit IT
instructions. In edge cases such as when all the instructions in the block
are 4-bytes in size and there is an implicit IT then the size is
underestimated. This can cause an out of range CBZ or CBNZ to be generated.
The patch takes a conservative approach and assumes that every instruction
in the inline assembly block may have an implicit IT.
Fixes pr31805
Differential Revision: https://reviews.llvm.org/D52834
llvm-svn: 343960
This rebases and recommits r343520. hwasan should be fixed now and this
shouldn't break the tests anymore.
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343895
Diogo Sampaio