Summary:
This directive is similar to ".set mipsX".
It is used to change the CPU target of the assembler, enabling it to accept instructions for a specific CPU.
This patch only implements the r4000 CPU (which is treated internally as generic mips3) and the generic ISAs.
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4884
llvm-svn: 215978
It causes a number of regressions when -fintegrated-as is enabled. This happens
because there are codegen-only instructions that incorrectly uses the first
operand as the encoding for the $fcc register. The regressions do not occur when
-via-file-asm is also given.
llvm-svn: 215847
Summary:
This pseudo-instruction allows the programmer to load an address from a symbolic expression into a register.
Patch by David Chisnall.
His work was sponsored by: DARPA, AFRL
I've made some minor changes to the original, such as improving the formatting and adding some comments, and I've also added a test case.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4808
llvm-svn: 215630
Patch by Matheus Almeida and Toma Tabacu
The lld test failure on the previous attempt to commit was caused by the
addition of the .pdr section causing the offsets it was checking to change.
This has been fixed by removing the .ent/.end directives from that test since
they weren't really needed.
llvm-svn: 215535
Summary:
These directives are used to toggle whether the assembler accepts MSA-specific instructions or not.
Patch by Matheus Almeida and Toma Tabacu.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4783
llvm-svn: 215099
Summary:
This patch also fixes an issue with the way the Mips assembler enables/disables architecture
features. Before this patch, the assembler never disabled feature bits. For example,
.set mips64
.set mips32r2
would result in the 'OR' of mips64 with mips32r2 feature bits which isn't right.
Unfortunately this isn't trivial to fix because there's not an easy way to clear
feature bits as the algorithm in MCSubtargetInfo (ToggleFeature) only clears the bits
that imply the feature being cleared and not the implied bits by the feature (there's a
better explanation to the code I added).
Patch by Matheus Almeida and updated by Toma Tabacu
Reviewers: vmedic, matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu, llvm-commits
Differential Revision: http://reviews.llvm.org/D4123
llvm-svn: 214709
This abstraction allows us to support the various records that can be placed in
the .MIPS.options section in the future. We currently use it to record register
usage information (the ODK_REGINFO record in our ELF64 spec).
Each .MIPS.options record should subclass MipsOptionRecord and provide an
implementation of EmitMipsOptionRecord.
Patch by Matheus Almeida and Toma Tabacu
llvm-svn: 213522
Summary:
Generally speaking, mips-* vs mips64-* should not be used to make decisions
about the content or format of the ELF. This should be based on the ABI
and CPU in use. For example, `mips-linux-gnu-clang -mips64r2 -mabi=64`
should produce an ELF64 as should `mips64-linux-gnu-clang -mabi=64`.
Conversely, `mips64-linux-gnu-clang -mabi=n32` should produce an ELF32 as
should `mips-linux-gnu-clang -mips64r2 -mabi=n32`.
This patch fixes the e_flags but leaves the ELF32 vs ELF64 issue for now
since there is no apparent way to base this decision on the ABI and CPU.
Differential Revision: http://reviews.llvm.org/D4539
llvm-svn: 213244
Summary:
The cpr1_size field describes the minimum register width to run the program
rather than the size of the registers on the target. MIPS32r6 was acting
as if -mfp64 has been given because it starts off with 64-bit FPU registers.
Differential Revision: http://reviews.llvm.org/D4538
llvm-svn: 213243
Summary:
These options are not implemented yet but we act as if they are always
given.
The integrated assembler is driven by the clang driver so the e_flag test
cases should match the e_flags emitted by GCC+GAS rather than GAS
by itself.
Differential Revision: http://reviews.llvm.org/D4536
llvm-svn: 213242
Summary: Previously all the test cases set it after initialization with '.module fp=xx'.
Differential Revision: http://reviews.llvm.org/D4489
llvm-svn: 213071
Summary:
.bss, .text, and .data are at least 16-byte aligned.
.reginfo is 4-byte aligned and has a 24-byte EntrySize.
.MIPS.abiflags has an 24-byte EntrySize.
.MIPS.options is 8-byte aligned and has 1-byte EntrySize.
Using a 1-byte EntrySize for .MIPS.options seems strange because the
records are neither 1-byte long nor fixed-length but this matches the value
that GAS emits.
Differential Revision: http://reviews.llvm.org/D4487
llvm-svn: 212939
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
llvm-svn: 212717
Summary:
It seems we accidentally read the wrong column of the table MIPS64r6 spec
and used the names for c.cond.fmt instead of cmp.cond.fmt.
Differential Revision: http://reviews.llvm.org/D4387
llvm-svn: 212607
Summary:
Follow on to r212519 to improve the encapsulation and limit the scope of the enums.
Also merged two very similar parser functions, fixed a bug where ASE's
were not being reported, and marked CPR1's as being 128-bit when MSA is
enabled.
Differential Revision: http://reviews.llvm.org/D4384
llvm-svn: 212522
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
llvm-svn: 212330
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
llvm-svn: 211590
Currently, llvm always emits a DWARF CIE with a version of 1, even when emitting
DWARF 3 or 4, which both support CIE version 3. This patch makes it emit the
newer CIE version when we are emitting DWARF 3 or 4. This will not reduce
compatibility, as we already emit other DWARF3/4 features, and is worth doing as
the DWARF3 spec removed some ambiguities in the interpretation of call frame
information.
It also fixes a minor bug where the "return address" field of the CIE was
encoded as a ULEB128, which is only valid when the CIE version is 3. There are
no test changes for this, because (as far as I can tell) none of the platforms
that we test have a return address register with a DWARF register number >127.
llvm-svn: 211272
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Some small modifications to the original patch: we now error if
it's not possible to expand an instruction (mips-expansions-bad.s has some
examples). Added some comments to the expansions.
llvm-svn: 211271
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
llvm-svn: 211169
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
llvm-svn: 211165
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
llvm-svn: 211160
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
llvm-svn: 211019
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
llvm-svn: 211018
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
llvm-svn: 211012
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
llvm-svn: 210900
Summary:
These MIPS-3D instructions have never been implemented in LLVM so we only
add testcases.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4115
llvm-svn: 210899
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
llvm-svn: 210898
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
llvm-svn: 210897
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
llvm-svn: 210787
Summary:
These instructions are not implemented for any MIPS ISA so we only need
testcases.
Depends on D4110
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4111
llvm-svn: 210786
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
llvm-svn: 210784
Toma Tabacu