Fix a warning detected by gcc 6:
warning: cast from type 'const void*' to type 'uint8_t* {aka unsigned char*}' casts away qualifiers [-Wcast-qual]
llvm-svn: 290618
Replace the use of grep with FileCheck. Tidy up some of the tests. A
few of the tests have been left as weak as previously, though some have
been made more stringent.
llvm-svn: 290616
There is no need to do this within an analysis. That method shouldn't
even be reached if this predicate holds as the actual useful
optimization is in the analysis manager itself.
llvm-svn: 290614
BasicAA in r290603.
I've kept the basic testing in the new PM test file as that also covers
the AAManager invalidation logic. If/when there is a good place for
broader AA testing it could move there.
This test is somewhat unsatisfying as I can't get it to fail even with
ASan outside of explicit checks of the invalidation. Apparently we don't
yet have any test coverage of the BasicAA code paths using either the
domtree or loopinfo -- I made both of them always be null and check-llvm
passed.
llvm-svn: 290612
The effect of the bug was that we would incorrectly create summaries
for global and weak values defined in module asm (since we were
essentially testing for bit 1 which is SF_Undefined, and the
RecordStreamer ignores local undefined references). This would have
resulted in conservatively disabling importing of anything referencing
globals and weaks defined in module asm. Added these cases to the test
which now fails without this bug fix.
Fixes PR31459.
llvm-svn: 290610
The feature allows for conditional assembly, filling the entries
of .amd_kernel_code_t etc.
Symbols are defined with value 0 at the beginning of each kernel scope.
After each register usage, the respective symbol is set to:
value = max( value, ( register index + 1 ) )
Thus, at the end of scope the value represents a count of used registers.
Kernel scopes begin at .amdgpu_hsa_kernel directive, end at the
next .amdgpu_hsa_kernel (or EOF, whichever comes first). There is also
dummy scope that lies from the beginning of source file til the
first .amdgpu_hsa_kernel.
Test added.
Differential Revision: https://reviews.llvm.org/D27859
llvm-svn: 290608
Because operand was not marked as seen it was visited twice.
It doesn't change behavior of optimization, it just saves redudant
visit, so no test changes.
llvm-svn: 290607
This requires custom handling because BasicAA caches handles to other
analyses and so it needs to trigger indirect invalidation.
This fixes one of the common crashes when using the new PM in real
pipelines. I've also tweaked a regression test to check that we are at
least handling the most immediate case.
I'm going to work at re-structuring this test some to both scale better
(rather than all being in one file) and check more invalidation paths in
a follow-up commit, but I wanted to get the basic bug fix in place.
llvm-svn: 290603
not really wired into the loop pass manager in a way that will let us
productively use these passes yet.
This lets the new PM get farther in basic testing which is useful for
establishing a good baseline of "doesn't explode". There are still
plenty of crashers in basic testing though, this just gets rid of some
noise that is well understood and not representing a specific or narrow
bug.
llvm-svn: 290601
inter-analysis dependencies) to use the new invalidation infrastructure.
This teaches it to invalidate itself when any of the peer function
AA results that it uses become invalid. We do this by just tracking the
originating IDs. I've kept it in a somewhat clunky API since some users
of AAResults are outside the new PM right now. We can clean this API up
if/when those users go away.
Secondly, it uses the registration on the outer analysis manager proxy
to trigger deferred invalidation when a module analysis result becomes
invalid.
I've included test cases that specifically try to trigger use-after-free
in both of these cases and they would crash or hang pretty horribly for
me even without ASan. Now they work nicely.
The `InvalidateAnalysis` utility pass required some tweaking to be
useful in this context and it still is pretty garbage. I'd like to
switch it back to the previous implementation and teach the explicit
invalidate method on the AnalysisManager to take care of correctly
triggering indirect invalidation, but I wanted to go ahead and send this
out so folks could see how all of this stuff works together in practice.
And, you know, that it does actually work. =]
Differential Revision: https://reviews.llvm.org/D27205
llvm-svn: 290595
that require deferred invalidation.
This handles the other real-world invalidation scenario that we have
cases of: a function analysis which caches references to a module
analysis. We currently do this in the AA aggregation layer and might
well do this in other places as well.
Since this is relative rare, the technique is somewhat more cumbersome.
Analyses need to register themselves when accessing the outer analysis
manager's proxy. This proxy is already necessarily present to allow
access to the outer IR unit's analyses. By registering here we can track
and trigger invalidation when that outer analysis goes away.
To make this work we need to enhance the PreservedAnalyses
infrastructure to support a (slightly) more explicit model for "sets" of
analyses, and allow abandoning a single specific analyses even when
a set covering that analysis is preserved. That allows us to describe
the scenario of preserving all Function analyses *except* for the one
where deferred invalidation has triggered.
We also need to teach the invalidator API to support direct ID calls
instead of always going through a template to dispatch so that we can
just record the ID mapping.
I've introduced testing of all of this both for simple module<->function
cases as well as for more complex cases involving a CGSCC layer.
Much like the previous patch I've not tried to fully update the loop
pass management layer because that layer is due to be heavily reworked
to use similar techniques to the CGSCC to handle updates. As that
happens, we'll have a better testing basis for adding support like this.
Many thanks to both Justin and Sean for the extensive reviews on this to
help bring the API design and documentation into a better state.
Differential Revision: https://reviews.llvm.org/D27198
llvm-svn: 290594
most of the inliner test cases.
The inliner involves a bunch of interesting code and tends to be where
most of the issues I've seen experimenting with the new PM lie. All of
these test cases pass, but I'd like to keep some more thorough coverage
here so doing a fairly blanket enabling.
There are a handful of interesting tests I've not enabled yet because
they're focused on the always inliner, or on functionality that doesn't
(yet) exist in the inliner.
llvm-svn: 290592
skipping indirectly recursive inline chains.
To do this, we implicitly build an inline stack for each callsite and
check prior to inlining that doing so would not form a cycle. This uses
the exact same technique and even shares some code with the legacy PM
inliner.
This solution remains deeply unsatisfying to me because it means we
cannot actually iterate the inliner externally. Doing so would not be
able to easily detect and avoid such cycles. Some day I would very much
like to have a solution that works without this internal state to detect
cycles, but this is not that day.
llvm-svn: 290590
Nothing really interesting here, but I had to improve the test to use
variables rather than hard coding value names as we happen to end up
with different value names in the new PM.
llvm-svn: 290589
We currently ignore the `allocsize` attribute on functions calls with
the `nobuiltin` attribute when trying to lower `@llvm.objectsize`. We
shouldn't care about `nobuiltin` here: `allocsize` is explicitly added
by the user, not inferred based on a function's symbol.
llvm-svn: 290588
This also makes us no longer check for `allocsize` on intrinsic calls.
This shouldn't matter, since intrinsics should provide the information
we get from `allocsize` on their own.
llvm-svn: 290585
PMULDQ/PMULUDQ vXi64 instructions only use the even numbered v2Xi32 input elements which SimplifyDemandedVectorElts should try and use.
This builds on r290554 which added supported for 128 and 256-bit.
llvm-svn: 290582
constant expression and to correctly form function reference edges
through them without crashing because one of the operands (the
`BasicBlock` isn't actually a constant despite being an operand of
a constant).
llvm-svn: 290581
The 128 and 256 bit masked intrinsics are currently unused by clang. The sse and avx2 unmasked intrinsics are used instead. The new 512-bit intrinsic will be used to do the same. Then all masked versions will removed and autoupgraded.
llvm-svn: 290573
This mostly involved converting from grep to FileCheck and tidying up
the IR used.
In one case (invoke_test-3.ll) the test had become completely pointless
as we use 'resume' rather than 'unwind' now, and even then it did not
occur at the end of the line.
llvm-svn: 290570
An earlier commit added support for unmasked scalar operations. At that time isel wouldn't generate an optimal sequence for masked operations, but that has now been fixed.
llvm-svn: 290566
These particular sequences will be generated after a future change to teach InstCombine to turn masked scalar arithmetic intrinsics into native IR.
llvm-svn: 290563
inside of `InlineFunction`. Prior to this, call instructions are
specifically being rewritten and replaced within the inlined region,
invalidating some of the call sites.
Several of these regions are using the same technique to walk the
inlined region so this seems clearly safe up to this point.
I've also added a short circuit to the scan for call sites based on what
other code is doing.
With this, the most common crash I've found in the new inliner code is
fixed. I've turned it on for another test case that covers this
scenario.
I'll make my way through most of the other inliner test cases
just to get some easy coverage next.
llvm-svn: 290562
removing fully-dead comdats without removing dead entries in comdats
with live members.
This factors the core logic out of the current inliner's internals to
a reusable utility and leverages that in both places. The factored out
code should also be (minorly) more efficient in cases where we have very
few dead functions or dead comdats to consider.
I've added a test case to cover this behavior of the always inliner.
This is the last significant bug in the new PM's always inliner I've
found (so far).
llvm-svn: 290557
PMULDQ/PMULUDQ vXi64 instructions only use the even numbered v2Xi32 input elements which SimplifyDemandedVectorElts should try and use.
Differential Revision: https://reviews.llvm.org/D28119
llvm-svn: 290554
Mostly use a bit more idiomatic C++ where we can,
so we can combine some things later.
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28111
llvm-svn: 290550
The current GVN algorithm folds unconditional branches to, it claims,
expose more PRE oportunities. The folding, if really needed,
(which is not sure, as it's not really proved it improves analysis)
can be done by an earlier cleanup pass instead of GVN itself.
Ack'ed/SGTM'd by Daniel Berlin.
Differential Revision: https://reviews.llvm.org/D28117
llvm-svn: 290546
systematically and document in the test what all is going on.
This replaces the PR-named test that was the only coverage for GlobalDCE
and comdats previously. I wrote this because I wasn't certain how
comdat DCE was supposed to work and wanted to step through what
GlobalDCE did to fully understand it. After talking to folks and reading
the code and really staring at things it all makes sense but it seemed
good to help write down some of this in a more explicit and fully
covering test case.
For example, it seemed like a bug that GlobalDCE didn't consider comdat
participation of ifuncs. Specifically it seemed like an accident because
testing didn't really cover that case. But in fact, ifuncs specifically
cannot participate in a comdat despite having that API. The new test
case covers this and explicitly documents that DCE gets to fire here
even though there are comdats involved.
Also, we didn't have any positive tests for the challenging cases such
as usage cycles between comdat participants that might make them seem
alive except that there is no external edge into the cycle.
llvm-svn: 290537
Summary:
I only do this for unmasked cases for now because isel is failing to fold the mask. I'll try to fix that soon.
I'll do the same thing for packed add/sub/mul/div in a future patch.
Reviewers: delena, RKSimon, zvi, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27879
llvm-svn: 290535
Summary:
This patch adds support for converting the masked vpermv intrinsics into shufflevector instructions if the indices are constants.
We also need to wrap a select instruction around the shuffle to take care of the masking part. InstCombine will take care of optimizing the select if the mask is constant so I didn't bother checking for that.
Reviewers: zvi, delena, spatel, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27825
llvm-svn: 290530
This recommits r290512 that was reverted when MSVC failed to compile it. Since
then I've played with various approaches using rextester.com (where I was able
to reproduce the failure) and think that I have a solution thanks in part to
the help of Dave Blaikie! It seems MSVC just has a defective `decltype` in this
version. Manually writing out the type seems to do the trick, even though it is
.... quite complicated.
Original commit message:
This allows both defining convenience iterator/range accessors on types
which walk across N different independent ranges within the object, and
more direct and simple usages with range based for loops such as shown
in the unittest. The same facilities are used for both. They end up
quite small and simple as it happens.
I've also switched an iterator on `Module` to use this. I would like to
add another convenience iterator that includes even more sequences as
part of it and seeing this one already present motivated me to actually
abstract it away and introduce a general utility.
Differential Revision: https://reviews.llvm.org/D28093
llvm-svn: 290528
multiple asynchronous RPC calls.
ParallelCallGroup allows multiple asynchronous calls to be dispatched,
and provides a wait method that blocks until all asynchronous calls have
been executed on the remote and all return value handlers run on the
local machine.
This will allow, for example, the JIT client to issue memory allocation calls
for all sections in parallel, then block until all memory has been allocated
on the remote and the allocated addresses registered with the client, at which
point the JIT client can proceed to applying relocations.
llvm-svn: 290523
This code doesn't work on MSVC for reasons that elude me and I've not
yet covinced a workaround to compile cleanly so reverting for now while
I play with it.
llvm-svn: 290513
This allows both defining convenience iterator/range accessors on types
which walk across N different independent ranges within the object, and
more direct and simple usages with range based for loops such as shown
in the unittest. The same facilities are used for both. They end up
quite small and simple as it happens.
I've also switched an iterator on `Module` to use this. I would like to
add another convenience iterator that includes even more sequences as
part of it and seeing this one already present motivated me to actually
abstract it away and introduce a general utility.
Differential Revision: https://reviews.llvm.org/D28093
llvm-svn: 290512
This makes it explicit what is the exact list to handle, and it
looks much more easy to manipulate and understand that the
previous custom tracking of min/max to express the range where
to look for.
Differential Revision: https://reviews.llvm.org/D28089
llvm-svn: 290507
whether functions are removed, and fix the new PM's always inliner to
actually pass this test.
Without this, the new PM's always inliner leaves all the functions
kicking around which won't work out very well given the semantics of
always inline.
Doing this really highlights how frustrating the current alwaysinline
semantic contract is though -- why can we put it on *external*
functions, etc?
Also I've added a number of tricky and interesting test cases for
removing functions with the always inliner. There is one remaining case
not handled -- fully removing comdats -- and I've left a FIXME about
this.
llvm-svn: 290457
Pretty boring and lame as-is but necessary. This is definitely a place
we'll end up with extension hooks longer term. =]
Differential Revision: https://reviews.llvm.org/D28076
llvm-svn: 290449
Hemant Kulkarni