Summary:
Previously, NPL tried to reinject SIGSTOP into the inferior in an attempt to get the process to
start in the group-stop state. This was:
a) wrong (reinjection should be controlled by "process handle" lldb setting)
b) racy (it should use Resume for transparent resuming instead of RequestResume)
c) broken (llgs crashed on inferior SIGSTOP)
With this change, SIGSTOP is handled just like any other signal delivered to the inferior: we
stop all threads and report signal reception to lldb. SIGSTOP reinjection does not behave the
same way as it would outside the debugger, but simulating this is a hard problem and is not
normally necessary.
Test Plan: I have added a test which verifies we get SIGSTOP reports and we do not crash.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9852
llvm-svn: 237880
dotest will select clang-3.5 by default and fall back on clang/gcc
dotest will look for the lldb executable in the typical cmake
output locations:
{lldb}/../../../build/bin (next to llvm directory)
{lldb}/../../../build/host/bin (next to llvm directory)
{lldb}/../build/bin (next to lldb directory)
{lldb}/../build/host/bin (next to lldb directory)
llvm-svn: 237632
The lldb executable was referenced through the code by 7 different
(effectively) global variables.
global lldbExecutablePath
global lldbExecutable
os.environ['LLDB_EXEC']
os.environ['LLDB_TEST']
dotest.lldbExec
dotest.lldbHere
lldbtest.lldbExec
This change uses one global variable lldbtest_config.lldbExec to
replace them all.
Differential Revision: http://reviews.llvm.org/D9817
llvm-svn: 237600
This patch initially was committed in r237460 but later it was reverted (r237479) due to 4 new failures:
* TestExitDuringStep.py
* TestNumThreads.py
* TestThreadExit.py
* TestThreadStates.py
This patch also fixes these tests.
llvm-svn: 237566
And they also do not have a thread/frame attached to them
That makes dynamic and synthetic values attached to them impossible to update - which, among other things, makes it impossible to properly display persistent variables of types that could have such dynamic/persistent values
Fix this by making it so that a ValueObject can control its constantness (hint: dynamic and synthetic values cannot be constant) and whether it wants to let itself be updated when an invalid thread is around
llvm-svn: 237504
When compiling programs for the test suite we currently choose which stdlib to
use based on the host platform, but should be basing this on the target
platform.
Test Plan: ./dotest.py $DOTEST_OPTS -t -p TestThreadExit.py
This test previously failed mac->linux most of the time due to using the mac
host's atomic declaration.
Differential Revision: http://reviews.llvm.org/D9797
llvm-svn: 237466
Summary:
This option forces to only set a source line breakpoint when there is an exact-match
This patch includes the following commits:
# Add the -m/--exact-match option in "breakpoint set" command
## Add exact_match arg in BreakpointResolverFileLine ctor
## Add m_exact_match field in BreakpointResolverFileLine
## Add exact_match arg in BreakpointResolverFileRegex ctor
## Add m_exact_match field in BreakpointResolverFileRegex
## Add exact_match arg in Target::CreateSourceRegexBreakpoint
## Add exact_match arg in Target::CreateBreakpoint
## Add -m/--exact-match option in "breakpoint set" command
# Add target.exact-match option to skip BP if source line doesn't match
## Add target.exact-match global option
## Add Target::GetExactMatch
## Refactor Target::CreateSourceRegexBreakpoint to accept LazyBool exact_match (was bool)
## Refactor Target::CreateBreakpoint to accept LazyBool exact_match (was bool)
# Add target.exact-match test in SettingsCommandTestCase
# Add BreakpointOptionsTestCase tests to test --skip-prologue/--exact-match options
# Fix a few typos in lldbutil.check_breakpoint_result func
# Rename --exact-match/m_exact_match/exact_match/GetExactMatch to --move-to-nearest-code/m_move_to_nearest_code/move_to_nearest_code/GetMoveToNearestCode
# Add exact_match field in BreakpointResolverFileLine::GetDescription and BreakpointResolverFileRegex::GetDescription, for example:
was:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
now:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, exact_match = 0, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
Test Plan:
./dotest.py -v --executable $BUILDDIR/bin/lldb functionalities/breakpoint/
./dotest.py -v --executable $BUILDDIR/bin/lldb settings/
./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/breakpoint/
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9273
llvm-svn: 237460
TestPluginCommands.py attempts to build a library which links against the host
built lldb library. This will only work if the remote is compatible with
binaries produced by the host.
Test Plan:
./dotest.py $DOTEST_OPTS -v -t -p TestPluginCommands.py
Test is skipped if remote platform is incompatible with host platform (i.e. mac
-> linux).
Differential Revision: http://reviews.llvm.org/D9770
llvm-svn: 237444
# Add CMICmdArgValPrintValues argument
# Rework -stack-list-arguments/-stack-list-locals/-stack-list-variables/-var-update/-var-list-children
commands to use the CMICmdArgValPrintValues argument instead of usage of pair of non-mandatory
arguments like: CMICmdArgValNumber(0) || CMICmdArgValLongOptions("no-values")
llvm-svn: 237429
Summary:
Android API-9 does not have sys/signal.h. However, all sys/signal.h
has when present is an include of signal.h.
Test Plan: dotest.py -p TestSendSignal on linux and Android.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9779
llvm-svn: 237381
Summary:
One cannot use mknod or mkfifo on user Android devices. This commit
changes the use of pipe to a file to synchronize between the inferior
and the test.
Test Plan: dotest.py -P TestAttachDenied
Reviewers: ovyalov, chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9768
llvm-svn: 237328
lock imports fcntl, which doesn't exist on Windows. If we need
to use this class on Windows, we will need to implement something
based on the CreateMutex API.
llvm-svn: 237292
Select expected remote libc++ library name based on remote platform. This is
used to verify libc++ is in the loaded image list by various tests which use it.
Test Plan:
Passes the following tests mac -> linux with this patch:
TestDataFormatterLibccIterator.py
TestDataFormatterLibccMap.py
TestDataFormatterLibccMultiMap.py
TestDataFormatterLibcxxMultiSet.py
TestDataFormatterLibcxxSet.py
TestDataFormatterUnordered.py
Differential Revision: http://reviews.llvm.org/D9759
llvm-svn: 237288
Someone must have changed the behavior of FileSpec slightly
relating to whether or not there is a trailing backslash when calling
GetPath() and GetDirectory(). This caused ScriptInterpreterPython
to find the wrong values when initializing sys.path, and as a result
we couldn't find the lldb module.
This patch fixes the issue, and also adds a test to make sure that
GetDirectory() does not return a string containing a trailing slash.
llvm-svn: 237282
Checks the host platform to determine logging channel to test in
TestRegisters.py as the logging runs host side.
Test Plan:
./dotest.py $DOTEST_OPTS -v -t -p TestRegisters.py
This passes mac -> linux as it's logging the correct channel.
Differential Revision: http://reviews.llvm.org/D9755
llvm-svn: 237271
Summary:
"import crashinfo" was probably failing because multiple dotest invocations
are all trying to compile crashinfo.so at the same time.
I've put a mutex around the compile step to prevent this.
Reviewers: clayborg, chying
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9732
llvm-svn: 237230
Ideally, this would be put in the individual test files.
Unfortunately, I'm not sure how to do that quickly/easily.
I'm open to suggestions.
In the meantime, I'll submit this to stabilze the build server.
llvm-svn: 237206
This patch adds new default flag -fno-builtin which forces gcc to not optimize builtin functions.
For example, without this flag GCC replaces printf("hello\n") -> puts("hello") even if -O0 was specified
Also this patch fixes the MiDataTestCase.test_lldbmi_data_disassemble test on Linux/gcc.
llvm-svn: 237118
Summary:
When -var-create fails, we will now show the error message from the failed evaluation if it is available.
Patch from chuckr@microsoft.com
Test Plan: I fixed the MiVarTestCase.test_lldbmi_eval test to expect the new error string. All MI tests passing on OS X.
Reviewers: abidh, ChuckR
Subscribers: greggm, lldb-commits, paulmaybee
Differential Revision: http://reviews.llvm.org/D9691
llvm-svn: 237094
Added missing SBLanguageRuntime.h to lldb.xcodeproj, set to Public (fixed compile error in TestPublicAPIHeaders)
Removed reference to (temporarily) missing gtest.xcodeproj
Fixed TestDeadStrip compile error
XFAIL TestPublicAPIHeaders - test passes but teardown command 'settings remove target.env-vars DYLD_LIBRARY_PATH' fails
XFAIL TestCModules - use of undeclared identifier 'MIN'
XFAIL TestModulesAutoImport - clang: error: unknown argument: '-gmodules'
XFAIL TestObjCNewSyntax - expr -- @((char*)"Hello world" + 6) cannot box a string value because NSString has not been declared
http://reviews.llvm.org/D9643
llvm-svn: 237085
This is a very minor change.
Just reshuffle the elements of the log filename so that the test name
comes before the arch/compiler
Before:
Failure-x86_64-clang-TestCModules.CModulesTestCase.test_expr_with_dwarf.log
After:
Failure-TestCModules.CModulesTestCase.test_expr_with_dwarf-x86_64-clang.log
This way, results are grouped by test name, not by arch. I think this
is much more useful.
Differential Revision: http://reviews.llvm.org/D9648
llvm-svn: 237076
Summary:
Since we don't yet have remote windows debugging, it should be safe to assume
that the remote target uses unix path separators.
Reviewers: ovyalov, zturner, clayborg, vharron
Reviewed By: vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9633
llvm-svn: 237006
When there is two brekapoint on two consecutive instruction then
the second breakpoint is ignored by lldb. This test check for the
correct behaviour in this scenario.
Differential revision: http://reviews.llvm.org/D9661
llvm-svn: 236997
For some reason this happens only when running the full test suite
(e.g., via ninja check-lldb), but not when running the
TestStaticVariables.py tests in isolation. XFAIL for now while
investigating, in an attempt to bring the bot to green and reduce noise.
llvm.org/pr20550
llvm-svn: 236993
Test Plan: run tests with/without python debugger
Tested on OSX & Linux with PyCharm
Reviewers: chying, clayborg
Differential Revision: http://reviews.llvm.org/D9593
llvm-svn: 236957
Summary:
New dotest options that allow arbitrary log channels and
categories to be enabled. Also enables logging for locally run
debug servers.
Log messages are separated into separate files per test case.
(this makes it possible to log in dosep runs)
These new log files are stored side-by-side with trace files in the
session directory.
These files are deleted by default if the test run is successful.
If --log-success is specified, even successful logs are retained.
--log-success is useful for creating reference log files.
Test Plan:
add '--channel "lldb all" --channel "gdb-remote packets" --log-success'
to your dotest options
Tested on OSX and Linux
Differential Revision: http://reviews.llvm.org/D9594
llvm-svn: 236956
XFAILing these does not work because the timeout is caught by the
top-level test infrastucture instead.
Some might be llvm.org/pr22784
llvm-svn: 236924
Summary:
This seems to be sufficient to get the tests taking longer than the
previous timeout of 5m to run to completion on Android to pass instead
of timing out.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9627
llvm-svn: 236913
I'm not yet sure what's wrong with pexpect and I cannot reproduce this
problem locally. XFAIL these tests for now to reduce buildbot noise so
I can track down the remaining buildbot failures.
llvm.org/pr22784
llvm-svn: 236857
It's reported to pass consistently on Linux now, and it passed for me
in local testing on FreeBSD. Remove the expectedFailureFreeBSD decorator
for now.
llvm.org/pr20274
llvm-svn: 236853
This patch includes the following changes:
# Add CMIUtilString::ConvertToASCII to convert unicode to ASCII (MI)
# Rework CMICmnLLDBUtilSBValue::GetSimpleValue to print wide/unicode char (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueChar
## Extend CMICmnLLDBUtilSBValue::IsCharType to accept char16_t/char32_t
## Don't ignore the fail_value in SBValue::GetValueAsUnsigned
# Rework CMIUtilString::ConvertToASCII (MI)
## Don't use templates
## Change the function signature to convert signle characters (was std::basic_string)
## Rename CMIUtilString::ConvertToASCII to CMIUtilString::ConvertToPrintableASCII
# Add CMIUtilString::ConvertToPrintableASCII for char (MI)
## Refactor CMIUtilString::Escape
## Simplify CMICmnLLDBUtilSBValue::GetSimpleValueChar for char
# Add char16_t* and char32_t* support in CMICmnLLDBUtilSBValue::GetSimpleValue (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueCStringPointer
## Add CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2
(it's extended version of CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory)
# Improve error checking in CMICmnLLDBUtilSBValue::GetSimpleValueChar (MI)
# Refactor CMICmnLLDBUtilSBValue (MI)
## Remove CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
(use CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 instead)
## Rename CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 to
CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
## Move CMICmnLLDBUtilSBValue::GetValueCString to private methods
## Rename CMICmnLLDBUtilSBValue::GetValueCString to
CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray
## Remove CMICmnLLDBUtilSBValue::GetChildValueCString
# Improve MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string test to check char16_t/char32_t (MI)
# Fix CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray for Unicode (MI)
## Fix handling of char16_t and char32_t
## Improve CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory to read
variables of type char[]: add vnMaxLen argument
## Turn on few cases to check char16_t[] and char32_t[] output in
MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string
# Remove unnecessary checks in CMICmnLLDBUtilSBValue (MI)
llvm-svn: 236827
This patch incldues the following:
# Add from/to arguments in -var-list-children command (MI)
## Handle from and to args
## Don't print children=[] if numchild is 0
## A bit refactoring
## Add MiVarTestCase.test_lldbmi_var_list_children test
# Refactor -var-list-children (MI)
## Remove CMICmdCmdVarListChildren::VecMIValueResult_t
## Add CMICmdCmdVarListChildren::m_miValueList
## Remove CMICmdCmdVarListChildren::m_vecMiValueResult
(use CMICmdCmdVarListChildren::m_miValueList instead)
## Print error message if value is invalid:
```
^error,msg="variable invalid"
```
## Refactor CMICmdCmdVarListChildren::Acknowledge and remove duplicated code
## Don't print children=[] if numchild is 0
## Add error checking
## Use CMICmnLLDBDebugSessionInfo::VariableInfoFormat_e for print-values
## Add few more empty-range test cases in MiVarTestCase.test_lldbmi_var_list_children
#Improve MiVarTestCase.test_lldbmi_var_list_children test (MI)
llvm-svn: 236820
Summary:
This set of changes addresses the issue I described in [[ http://llvm.org/pr23403 | Bug 23403 ]], in short most LLDB-MI tests fail unexpectedly due to timeout on my Ubuntu 14.10 x86_64 VirtualBox VM. I have no idea why the Ubuntu buildbots don't seem to suffer from this issue. This patch just makes **MiTestCaseBase.spawnLldbMi()** block until the spawned LLDB-MI child process outputs the **(gdb)** prompt, which ensures that MI commands aren't sent to the LLDB-MI child process until it's ready.
Before these changes 52 LLDB-MI tests failed unexpectedly (all but one due to timeouts), after these changes no tests fail due to timeouts. I still get one unexpected failure in **test_lldbmi_source_option_start_script_error** in **TestMiStartupOptions.py**, but that's due to a file error, that test should be skipped on Linux just like the other two //start_script// tests until the file error is fixed.
Patch from Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh, domipheus, ki.stfu
Reviewed By: ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9595
llvm-svn: 236816
Summary:
Android has limits on file name lengths. This commit reduces the names of
the test executables to satisfy these limits.
Test Plan: dotest.py -p TestWatchpointMultipleThreads
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9540
llvm-svn: 236783
After recent changes, TestConcurrentEvents began timing out. This increases the timeout limit to
7m for this test, ensure the Test has enough time to complete.
llvm-svn: 236725
Summary:
This changes add -target-attach and -target-detach.
-target-attach allows lldb-mi to attach to an existing process by it's process id, matching gdb mi's syntax of '-target-attach <pid'. Additionally, support has been added for attaching to a process by name using '-target-attach -n <name>'. Combining this with --waitfor will allow lldb mi to attach to a process by name when the process starts.
-target-detach simply detaches from the current process
Patch from chuckr@microsoft.com
Test Plan: I have added three tests, one each for -target-attach <pid>, -target-attach -n <name>, and -target-attach -n <name> --waitfor
Reviewers: paulmaybee, abidh, ChuckR
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D9484
llvm-svn: 236705
Summary:
- The address argument can now be an expression (e.g. &array), it's no longer restricted to being just a number literal.
- The -o (offset) option is now properly handled, not just silently ignored.
- The --thread option is now properly handled.
- A new --frame option has been added for consistency with GDB.
- Added a new test to verify old and new functionality.
Patch by Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/data
Reviewers: domipheus, abidh, ki.stfu
Reviewed By: abidh, ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9470
llvm-svn: 236694
the test has passed in the last 300 runs, enabling to see what the build bot says. Also,
downgrading skipIfGcc to XFAIL, with plans of enabling it in the future if it shows to be
working.
llvm-svn: 236496
Summary:
This fixes TestRegisterVariables for clang and hence it is enabled in this commit.
Test Plan: dotest.py -C clang -p TestRegisterVariables
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9421
llvm-svn: 236447
Some have been marked as skipIfLinux for years.
The seem to be passing so I've enabled them.
Differential Revision: http://reviews.llvm.org/D9428
llvm-svn: 236403
Refactored TestInitializerList to not be an inline test.
Refactored Makefiles to use USE_LIBCPP instead of adding FLAGS directly
Fixed copy/paste error in TestDataFormatterUnordered class name
Differenttial Revision: http://reviews.llvm.org/D9426
llvm-svn: 236401
These tests link against host lldb API. Compiler's target triple
must match liblldb triple. Instead of naively skipping i386, I added
a check of the liblldb arch against the compiler target arch.
This is useful for 32 bit API builds (planned for Windows)
Since remote is disabled, we can assume the os is the same.
Also, removed skipIfLinuxClang because it's passing
llvm-svn: 236396
Summary:
r235916 marked only one of the tests as xfail, but the other also has
been failing intermitantly on the buildbot.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9452
llvm-svn: 236366
(including inline functions) from modules in the
expression parser. We now have to retain a reference
to the code generator in ClangExpressionDeclMap so
that any imported function bodies can be appropriately
sent to that code generator.
<rdar://problem/19883002>
llvm-svn: 236297
This command is able to list both local variables and stack arguments for a specific thread/frame.
Args are denoted with 'arg="1"'.
Patch from Chuck Ries.
llvm-svn: 236090
Summary:
The "internal" name of vars is different between clang and GCC. All this
change does is to use a regex instead of the hardcoded internal name.
Test Plan: dotest.py -C <clang|gcc> -p TestMiVar
Reviewers: ki.stfu
Reviewed By: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9128
llvm-svn: 236024
Summary:
When using GDB with MI, if there aren't children for a variable,
it doesn't include a "children" value in the response. LLDB does
and sets it to "[]" while variables with children have an unquoted
list: children=[...].
This removes the children value entirely when there are no children
making this match GDB in behavior.
Test Plan: Ran tests on Mac OS X and they passed.
Reviewers: abidh, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9320
llvm-svn: 235974
Summary:
Currently if two instances of lldb-mi are running with logging enabled using '--log' the log file conflicts. This produces the following error
MI: Error: File Handler. Error Permission denied opening 'C:\Users\Ewan\LLVM\build\Debug\bin\lldb-mi-log.txt'
Fixed in this patch by renaming lldb-mi-log.txt based on the date, e.g. lldb-mi-log.txt-20150316163631.log, and moving the file into the temp directory by using the --log-dir option.
Regrading previous review comments the P_tmpdir macro is defined in Windows but always points to "\", which doesn't help much. Also when using the Windows API for GetTempPath() dynamic memory seems much more messy.
Patch from ewan@codeplay.com
Reviewers: abidh, EwanCrawford
Subscribers: zturner, lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D9054
llvm-svn: 235589
The test case lookinhg for the abort function in the stack trace.
Previously it lookd for a function which ends with "abort" but on some
system there are multiple such functions (e.g.: on android abort calls
__libc_android_abort) what made the test fail. This CL change the
behaviour to look for the abort function based on a fix list of names.
llvm-svn: 235584
Adrian McCarthy