When extracting constant expressions out of SCEVs, new parameters may be
introduced, which have not been registered before. This change scans
SCEV expressions after constant extraction again to make sure newly
introduced parameters are registered.
We may for example extract the constant '8' from the expression '((8 * ((%a *
%b) + %c)) + (-8 * %a))' and obtain the expression '(((-1 + %b) * %a) + %c)'.
The new expression has a new parameter '(-1 + %b) * %a)', which was not
registered before, but must be registered to not crash.
This closes http://llvm.org/PR30953
Reported-by: Eli Friedman <efriedma@codeaurora.org>
llvm-svn: 286430
We don't actually check whether a MemoryAccess is affine in very many
places, but one important one is in checks for aliasing.
Differential Revision: https://reviews.llvm.org/D25706
llvm-svn: 285746
When adding an llvm.memcpy instruction to AliasSetTracker, it uses the raw
source and target pointers which preserve bitcasts.
MemAccInst::getPointerOperand() also returns the raw target pointers, but
Scop::buildAliasGroups() did not for the source pointer. This lead to mismatches
between AliasSetTracker and ScopInfo on which pointer to use.
Fixed by also using raw pointers in Scop::buildAliasGroups().
llvm-svn: 285071
Integer math in LLVM IR is modular. Integer math in isl is
arbitrary-precision. Modeling LLVM IR math correctly in isl requires
either adding assumptions that math doesn't actually overflow, or
explicitly wrapping the math. However, expressions with the "nsw" flag
are special; we can pretend they're arbitrary-precision because it's
undefined behavior if the result wraps. SCEV expressions based on IR
instructions with an nsw flag also carry an nsw flag (roughly; actually,
the real rule is a bit more complicated, but the details don't matter
here).
Before this patch, SCEV flags were also overloaded with an additional
function: the ZExt code was mutating SCEV expressions as a hack to
indicate to checkForWrapping that we don't need to add assumptions to
the operand of a ZExt; it'll add explicit wrapping itself. This kind of
works... the problem is that if anything else ever touches that SCEV
expression, it'll get confused by the incorrect flags.
Instead, with this patch, we make the decision about whether to
explicitly wrap the math a bit earlier, basing the decision purely on
the SCEV expression itself, and not its users.
Differential Revision: https://reviews.llvm.org/D25287
llvm-svn: 284848
Update test after commit r284501:
[SCEV] Make CompareValueComplexity a little bit smarter
Contributed-by: Sanjoy Das <sanjoy@playingwithpointers.com>
llvm-svn: 284543
The test non_affine_loop_used_later.ll also tests the profability heuristic. Add
the option -polly-unprofitable-scalar-accs explicitely to ensure that the test
succeeds if the default value is changed.
llvm-svn: 284338
Under some conditions MK_Value read accessed where converted to MK_ExitPHI read
accessed. This is unexpected because MK_ExitPHI read accesses are implicit after
the scop execution. This behaviour was introduced in r265261, which fixed a
failed assertion/crash in CodeGen.
Instead, we fix this failure in CodeGen itself. createExitPHINodeMerges(),
despite its name, also handles accesses of kind MK_Value, only to skip them
because they access values that are usually not PHI nodes in the SCoP region's
exit block. Except in the situation observed in r265261.
Do not convert value accessed to ExitPHI accesses and do not handle
value accesses like ExitPHI accessed in CodeGen anymore.
llvm-svn: 284023
With this option one can disable the heuristic that assumes that statements with
a scalar write access cannot be profitably optimized. Such a statement instances
necessarily have WAW-dependences to itself. With DeLICM scalar accesses can be
changed to array accesses, which can avoid these WAW-dependence.
llvm-svn: 283233
ScopArrayInfo used to determine base pointer origins by looking up whether the
base pointer is a load. The "base pointer" for scalar accesses is the
llvm::Value being accessed. This is only a symbolic base pointer, it
represents the alloca variable (.s2a or .phiops) generated for it at code
generation.
This patch disables determining base pointer origin for scalars.
A test case where this caused a crash will be added in the next commit. In that
test SAI tried to get the origin base pointer that was only declared later,
therefore not existing. This is probably only possible for scalars used in
PHINode incoming blocks.
llvm-svn: 283232
The existing code would add the operands in the wrong order, and eventually
crash because the SCEV expression doesn't exactly match the parameter SCEV
expression in SCEVAffinator::visit. (SCEV doesn't sort the operands to
getMulExpr in general.)
Differential Revision: https://reviews.llvm.org/D23592
llvm-svn: 279087
Normally this is ensured when adding PHI nodes, but as PHI node dependences
do not need to be added in case all incoming blocks are within the same
non-affine region, this was missed.
This corrects an issue visible in LNT's sqlite3, in case invariant load hoisting
was disabled.
llvm-svn: 278792
This will make it easier to switch the default of Polly's invariant load
hoisting strategy and also makes it very clear that these test cases
indeed require invariant code hoisting to work.
llvm-svn: 278667
After having generated the code for a ScopStmt, we run a simple dead-code
elimination that drops all instructions that are known to be and remain unused.
Until this change, we only considered instructions for dead-code elimination, if
they have a corresponding instruction in the original BB that belongs to
ScopStmt. However, when generating code we do not only copy code from the BB
belonging to a ScopStmt, but also generate code for operands referenced from BB.
After this change, we now also considers code for dead code elimination, which
does not have a corresponding instruction in BB.
This fixes a bug in Polly-ACC where such dead-code referenced CPU code from
within a GPU kernel, which is possible as we do not guarantee that all variables
that are used in known-dead-code are moved to the GPU.
llvm-svn: 278103
This ensures that no trivially dead code is generated. This is not only cleaner,
but also avoids troubles in case code is generated in a separate function and
some of this dead code contains references to values that are not available.
This issue may happen, in case the memory access functions have been updated
and old getelementptr instructions remain in the code. With normal Polly,
a test case is difficult to draft, but the upcoming GPU code generation can
possibly trigger such problems. We will later extend this dead-code elimination
to region and vector statements.
llvm-svn: 276263
Check not only that the compiler is not crashing, but also whether the
probablematic part (The sequence of instructions simplified to '4') is reflected
in the output.
Thanks to Tobias for the hint.
llvm-svn: 275189
An assertion in visitSDivInstruction() checked whether the divisor is constant
by checking whether the argument is a ConstantInt. However, SCEVValidator allows
the divisor to be simplified to a constant by ScalarEvolution.
We synchronize the implementation of SCEVValidator and SCEVAffinator to both
accept simplified SCEV expressions.
llvm-svn: 275174
For llvm the memory accesses from nonaffine loops should be visible,
however for polly those nonaffine loops should be invisible/boxed.
This fixes llvm.org/PR28245
Cointributed-by: Huihui Zhang <huihuiz@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D21591
llvm-svn: 274842
This patch adds a new function pass ScopInfoWrapperPass so that the
polyhedral description of a region, the SCoP, can be constructed and
used in a function pass.
Patch by Utpal Bora <cs14mtech11017@iith.ac.in>
Differential Revision: http://reviews.llvm.org/D20962
llvm-svn: 273856
IntToPtr and PtrToInt instructions are basically no-ops that we can handle as
such. In order to generate them properly as parameters we had to improve the
ScopExpander, though the change is the first in the direction of a more
aggressive scalar synthetization.
This patch was originally contributed by Johannes Doerfert in r271888, but was
in conflict with the revert in r272483. This is a recommit with some minor
adjustment to the test cases to take care of differing instruction names.
llvm-svn: 272485
The recent expression type changes still need more discussion, which will happen
on phabricator or on the mailing list. The precise list of commits reverted are:
- "Refactor division generation code"
- "[NFC] Generate runtime checks after the SCoP"
- "[FIX] Determine insertion point during SCEV expansion"
- "Look through IntToPtr & PtrToInt instructions"
- "Use minimal types for generated expressions"
- "Temporarily promote values to i64 again"
- "[NFC] Avoid unnecessary comparison for min/max expressions"
- "[Polly] Fix -Wunused-variable warnings (NFC)"
- "[NFC] Simplify min/max expression generation"
- "Simplify the type adjustment in the IslExprBuilder"
Some of them are just reverted as we would otherwise get conflicts. I will try
to re-commit them if possible.
llvm-svn: 272483
We now generate runtime checks __after__ the SCoP code generation and
not before, though they are still inserted at the same position int
the code. This allows to modify the runtime check during SCoP code
generation.
llvm-svn: 271894
IntToPtr and PtrToInt instructions are basically no-ops that we can handle as
such. In order to generate them properly as parameters we had to improve the
ScopExpander, though the change is the first in the direction of a more
aggressive scalar synthetization.
llvm-svn: 271888
We now use the minimal necessary bit width for the generated code. If
operations might overflow (add/sub/mul) we will try to adjust the types in
order to ensure a non-wrapping computation. If the type adjustment is not
possible, thus the necessary type is bigger than the type value of
--polly-max-expr-bit-width, we will use assumptions to verify the computation
will not wrap. However, for run-time checks we cannot build assumptions but
instead utilize overflow tracking intrinsics.
llvm-svn: 271878
Summary:
After rL271151 (SCEV change) SCEV no longer unconditionally transfers
nuw/nsw from the increment operation to the post-inc value; this
transfer only happens if there is undefined behavior in the program if
the increment overflowed (as opposed to just generating poison).
The loops in `wraping_signed_expr_1.ll` are in non-canonical
form (they're not rotated), and that defeats LLVM's poison-is-UB
analysis. IMO the easiest fix here is to run `wraping_signed_expr_1.ll`
through `-loop-rotate` to canonicalize the loops, which is what this
patch does.
Reviewers: jdoerfert, Meinersbur, grosser
Subscribers: grosser, mcrosier, pollydev
Differential Revision: http://reviews.llvm.org/D20778
llvm-svn: 271536
Before this patch we bailed if a required invariant load was potentially
overwritten. However, now we will optimistically assume it is actually
invariant and, to this end, restrict the valid parameter space as well as the
execution context with regards to potential overwrites of the location.
llvm-svn: 270416
So far we bailed if a required invariant load was potentially overwritten in
the SCoP. From now on we will optimistically assume it is actually invariant
and, to this end, restrict the valid parameter space.
llvm-svn: 270060
Truncate operations are basically modulo operations, thus we can model
them that way. However, for large types we assume the operand to fit
in the new type size instead of introducing a modulo with a very large
constant.
llvm-svn: 269300
If a profitable run is performed we will check if the SCoP seems to be
profitable after creation but before e.g., dependence are computed. This is
needed as SCoP detection only approximates the actual SCoP representation.
In the end this should allow us to be less conservative during the SCoP
detection while keeping the compile time in check.
llvm-svn: 269074
Regions with one affine loop can be profitable if the loop is
distributable. To this end we will allow them to be treated as
profitable if they contain at least two non-trivial basic blocks.
llvm-svn: 269064
The assumption attached to an llvm.assume in the SCoP needs to be
combined with the domain of the surrounding statement but can
nevertheless be used to refine the context.
This fixes the problems mentioned in PR27067.
llvm-svn: 269060
This patches makes the propagation of complexity problems during
domain generation consistent. Additionally, it makes it less likely to
encounter ill-formed domains later, e.g., during schedule generation.
llvm-svn: 269055
Before this patch we generated error-restrictions only for
error-blocks, thus blocks (or regions) containing a not represented
function call. However, the same reasoning is needed if the invalid
domain of a statement subsumes its actual domain. To this end we move
the generation of error-restrictions after the propagation of the
invalid domains. Consequently, error-statements are now defined more
general as statements that are assumed to be not executed.
Additionally, we do not record an empty domain for such statements but
a nullptr instead. This allows to distinguish between error-statements
and dead-statements.
llvm-svn: 269053
We now use context information to simplify the domains and access
functions of the SCoP instead of just aligning them with the parameter
space.
llvm-svn: 269048
After zero-extend operations and unsigned comparisons we now allow
unsigned divisions. The handling is basically the same as for signed
division, except the interpretation of the operands. As the divisor
has to be constant in both cases we can simply interpret it as an
unsigned value without additional complexity in the representation.
For the dividend we could choose from the different representation
schemes introduced for zero-extend operations but for now we will
simply use an assumption.
llvm-svn: 268032
It does not suffice to take a global assumptions for unsigned comparisons but
we also need to adjust the invalid domain of the statements guarded by such
an assumption. To this end we allow to specialize the getPwAff call now in
order to indicate unsigned interpretation.
llvm-svn: 268025
Assumptions and restrictions can both be simplified with the domain of a
statement but not the same way. After this patch we will correctly
distinguish them.
llvm-svn: 267885
With this patch we will optimistically assume that the result of an unsigned
comparison is the same as the result of the same comparison interpreted as
signed.
llvm-svn: 267559
Additive expressions can have constant factors too that we can extract
and thereby simplify the internal representation. For now we do
compute the gcd of all constant factors but only extract the same
(possibly negated) factor if there is one.
llvm-svn: 267445
Before, we checked all GEPs in a statement in order to derive
out-of-bound assumptions. However, this can not only introduce new
parameters but it is also not clear what we can learn from GEPs that
are not immediately used in a memory accesses inside the SCoP. As this
case is very rare, no actual change in the behaviour is expected.
llvm-svn: 267442
Before, assumptions derived from llvm.assume could reference new
parameters that were not known to the SCoP before. These were neither
beneficial to the representation nor to the user that reads the
emitted remark. Now we project them out and keep only user assumptions
on known parameters. Nevertheless, the new parameters are still part
of the SCoPs parameter space as the SCEVAffinator currently adds them
on demand.
llvm-svn: 267441
A zero-extended value can be interpreted as a piecewise defined signed
value. If the value was non-negative it stays the same, otherwise it
is the sum of the original value and 2^n where n is the bit-width of
the original (or operand) type. Examples:
zext i8 127 to i32 -> { [127] }
zext i8 -1 to i32 -> { [256 + (-1)] } = { [255] }
zext i8 %v to i32 -> [v] -> { [v] | v >= 0; [256 + v] | v < 0 }
However, LLVM/Scalar Evolution uses zero-extend (potentially lead by a
truncate) to represent some forms of modulo computation. The left-hand side
of the condition in the code below would result in the SCEV
"zext i1 <false, +, true>for.body" which is just another description
of the C expression "i & 1 != 0" or, equivalently, "i % 2 != 0".
for (i = 0; i < N; i++)
if (i & 1 != 0 /* == i % 2 */)
/* do something */
If we do not make the modulo explicit but only use the mechanism described
above we will get the very restrictive assumption "N < 3", because for all
values of N >= 3 the SCEVAddRecExpr operand of the zero-extend would wrap.
Alternatively, we can make the modulo in the operand explicit in the
resulting piecewise function and thereby avoid the assumption on N. For the
example this would result in the following piecewise affine function:
{ [i0] -> [(1)] : 2*floor((-1 + i0)/2) = -1 + i0;
[i0] -> [(0)] : 2*floor((i0)/2) = i0 }
To this end we can first determine if the (immediate) operand of the
zero-extend can wrap and, in case it might, we will use explicit modulo
semantic to compute the result instead of emitting non-wrapping assumptions.
Note that operands with large bit-widths are less likely to be negative
because it would result in a very large access offset or loop bound after the
zero-extend. To this end one can optimistically assume the operand to be
positive and avoid the piecewise definition if the bit-width is bigger than
some threshold (here MaxZextSmallBitWidth).
We choose to go with a hybrid solution of all modeling techniques described
above. For small bit-widths (up to MaxZextSmallBitWidth) we will model the
wrapping explicitly and use a piecewise defined function. However, if the
bit-width is bigger than MaxZextSmallBitWidth we will employ overflow
assumptions and assume the "former negative" piece will not exist.
llvm-svn: 267408
Memory accesses can have non-precisely modeled access functions that
would cause us to build incorrect execution context for hoisted loads.
This is the same issue that occurred during the domain construction for
statements and it is dealt with the same way.
llvm-svn: 267289
The SCEVAffinator will now produce not only the isl representaiton of
a SCEV but also the domain under which it is invalid. This is used to
record possible overflows that can happen in the statement domains in
the statements invalid domain. The result is that invalid loads have
an accurate execution contexts with regards to the validity of their
statements domain. While the SCEVAffinator currently is only taking
"no-wrapping" assumptions, we can add more withouth worrying about the
execution context of loads that are optimistically hoisted.
llvm-svn: 267288
As discussed in the Polly weekly phone call and reviews.llvm.org/D18878,
the assumed contexts changed (widen) due to D18878/r265942. Also check
these contexts in the tests affected by that change.
llvm-svn: 266323
Utilizing the record option for assumptions we can simplify the wrapping
assumption generation a lot. Additionally, we can now report locations
together with wrapping assumptions, though they might not be accurate yet.
llvm-svn: 266069
There are three reasons why we want to record assumptions first before we
add them to the assumed/invalid context:
1) If the SCoP is not profitable or otherwise invalid without the
assumed/invalid context we do not have to compute it.
2) Information about the context are gathered rather late in the SCoP
construction (basically after we know all parameters), thus the user
might see overly complicated assumptions to be taken while they would
have been simplified later on.
3) Currently we cannot take assumptions at any point but have to wait,
e.g., for the domain generation to finish. This makes wrapping
assumptions much more complicated as they need to be and it will
have a similar effect on "signed-unsigned" assumptions later.
llvm-svn: 266068
Collect the error domain contexts (formerly in the ErrorDomainCtxMap)
for each statement in the new InvalidContext member variable. While
this commit is basically a [NFC] it is a first step to make hoisting
sound by allowing a more fine grained record of invalid contexts,
e.g., here on statement level.
llvm-svn: 266053
Allow overflow of indices into the next higher dimension if it has
constant size. E.g.
float A[32][2];
((float*)A)[5];
is effectively the same as
A[2][1];
This can happen since r265379 as a side effect if ScopDetection
recognizes an access as affine, but ScopInfo rejects the GetElementPtr.
Differential Revision: http://reviews.llvm.org/D18878
llvm-svn: 265942
In r247147 we disabled pointer expressions because the IslExprBuilder did not
fully support them. This patch reintroduces them by simply treating them as
integers. The only special handling for pointers that is left detects the
comparison of two address_of operands and uses an unsigned compare.
llvm-svn: 265894
The way to get the elements size with getPrimitiveSizeInBits() is not
the same as used in other parts of Polly which should use
DataLayout::getTypeAllocSize(). Its use only queries the size of the
pointer and getPrimitiveSizeInBits returns 0 for types that require a
DataLayout object such as pointers.
Together with r265379, this should fix PR27195.
llvm-svn: 265795
If we build the domains for error blocks and later remove them we lose
the information that they are not executed. Thus, in the SCoP it looks
like the control will always reach the statement S:
for (i = 0 ... N)
if (*valid == 0)
doSth(&ptr);
S: A[i] = *ptr;
Consequently, we would have assumed "ptr" to be always accessed and
preloaded it unconditionally. However, only if "*valid != 0" we would
execute the optimized version of the SCoP. Nevertheless, we would have
hoisted and accessed "ptr"regardless of "*valid". This changes the
semantic of the program as the value of "*valid" can cause a change of
"ptr" and control if it is executed or not.
To fix this problem we adjust the execution context of hoisted loads
wrt. error domains. To this end we introduce an ErrorDomainCtxMap that
maps each basic block to the error context under which it might be
executed. Thus, to the context under which it is executed but an error
block would have been executed to. To fill this map one traversal of
the blocks in the SCoP suffices. During this traversal we do also
"remove" error statements and those that are only reachable via error
statements. This was previously done by the removeErrorBlockDomains
function which is therefor not needed anymore.
This fixes bug PR26683 and thereby several SPEC miscompiles.
Differential Revision: http://reviews.llvm.org/D18822
llvm-svn: 265778
If ScalarEvolution cannot look through some expression but we do, it
might happen that a multiplication will arrive at the
SCEVAffinator::visitMulExpr. While we could always try to improve the
extractConstantFactor function we might still miss something, thus we
reintroduce the code to generate multiplicative piecewise-affine
functions as a fall-back.
llvm-svn: 265777
If all exiting blocks of a SCoP are error blocks and therefor not
represented we will not generate accesses and consequently no SAI
objects for exit PHIs. However, they are needed in the code generation
to generate the merge PHIs between the original and optimized region.
With this patch we enusre that the SAI objects for exit PHIs exist
even if all exiting blocks turn out to be eror blocks.
This fixes the crash reported in PR27207.
llvm-svn: 265393
Even before we build the domain the branch condition can become very
complex, especially if we have to build the complement of a lot of
equality constraints. With this patch we bail if the branch condition
has a lot of basic sets and parameters.
After this patch we now successfully compile
External/SPEC/CINT2000/186_crafty/186_crafty
with "-polly-process-unprofitable -polly-position=before-vectorizer".
llvm-svn: 265286
As a CFG is often structured we can simplify the steps performed during
domain generation. When we push domain information we can utilize the
information from a block A to build the domain of a block B, if A dominates B
and there is no loop backede on a path from A to B. When we pull domain
information we can use information from a block A to build the domain of a
block B if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL basic block
in test/ScopInfo/complex-successor-structure-3.ll we used to build a universe
set with 81 basic sets. Now it actually is represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit if applicable.
With this patch we now successfully compile
External/SPEC/CINT2006/400_perlbench/400_perlbench
and
SingleSource/Benchmarks/Adobe-C++/loop_unroll.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 265285
If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265280
If an exit PHI is written and also read in the SCoP we should not create two
SAI objects but only one. As the read is only modeled to ensure OpenMP code
generation knows about it we can simply use the EXIT_PHI MemoryKind for both
accesses.
llvm-svn: 265261
If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265260
These caused LNT failures due to new assertions when running with
-polly-position=before-vectorizer -polly-process-unprofitable for:
FAIL: clamscan.compile_time
FAIL: cjpeg.compile_time
FAIL: consumer-jpeg.compile_time
FAIL: shapes.compile_time
FAIL: clamscan.execution_time
FAIL: cjpeg.execution_time
FAIL: consumer-jpeg.execution_time
FAIL: shapes.execution_time
The failures have been introduced by r264782, but r264789 had to be reverted
as it depended on the earlier patch.
llvm-svn: 264885
As a CFG is often structured we can simplify the steps performed
during domain generation. When we push domain information we can
utilize the information from a block A to build the domain of a
block B, if A dominates B. When we pull domain information we can
use information from a block A to build the domain of a block B
if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL
basic block in
test/ScopInfo/complex-successor-structure-3.ll .
we used to build a universe set with 81 basic sets. Now it actually is
represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 264789
This patch applies the restrictions on the number of domain conjuncts
also to the domain parts of piecewise affine expressions we generate.
To this end the wording is change slightly. It was needed to support
complex additions featuring zext-instructions but it also fixes PR27045.
lnt profitable runs reports only little changes that might be noise:
Compile Time:
Polybench/[...]/2mm +4.34%
SingleSource/[...]/stepanov_container -2.43%
Execution Time:
External/[...]/186_crafty -2.32%
External/[...]/188_ammp -1.89%
External/[...]/473_astar -1.87%
llvm-svn: 264514
This fixes PR27035. While we now exclude MemIntrinsics from the
polyhedral model if they would access "null" we could exploit this
even more, e.g., remove all parameter combinations that would lead to
the execution of this statement from the context.
llvm-svn: 264284
This might be useful to evaluate the benefit of us handling modref funciton
calls. Also, a new bug that was triggered by modref function calls was
recently reported http://llvm.org/PR27035. To ensure the same issue does not
cause troubles for other people, we temporarily disable this until the bug
is resolved.
llvm-svn: 264140
ISL can conclude additional conditions on parameters from restrictions
on loop variables. Such conditions persist when leaving the loop and the
loop variable is projected out. This results in a narrower domain for
exiting the loop than entering it and is logically impossible for
non-infinite loops.
We fix this by not adding a lower bound i>=0 when constructing BB
domains, but defer it to when also the upper bound it computed, which
was done redundantly even before this patch.
This reduces the number of LNT fails with -polly-process-unprofitable
-polly-position=before-vectorizer from 8 to 6.
llvm-svn: 264118
We bail out if current scop has a complex control flow as this could lead to
building of large domain conditions. This is to reduce compile time. This
addresses r26382.
Contributed-by: Chris Jenneisch <chrisj@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D18362
llvm-svn: 264105
Affine branches are fully modeled and regenerated from the polyhedral domain and
consequently do not require any input conditions to be propagated.
llvm-svn: 263678
This should fix PR19422.
Thanks to Jeremy Huddleston Sequoia for reporting this.
Thanks to Roman Gareev for his investigation and the reduced test case.
llvm-svn: 262612
In order to speed up compile time and to avoid random timeouts we now
separately track assumptions and restrictions. In this context
assumptions describe parameter valuations we need and restrictions
describe parameter valuations we do not allow. During AST generation
we create a runtime check for both, whereas the one for the
restrictions is negated before a conjunction is build.
Except the In-Bounds assumptions we currently only track restrictions.
Differential Revision: http://reviews.llvm.org/D17247
llvm-svn: 262328
Check the ModRefBehaviour of functions in order to decide whether or
not a call instruction might be acceptable.
Differential Revision: http://reviews.llvm.org/D5227
llvm-svn: 261866
From now on we bail only if a non-trivial alias group contains a non-affine
access, not when we discover aliasing and non-affine accesses are allowed.
llvm-svn: 261863
This patch adds support for memcpy, memset and memmove intrinsics. They are
represented as one (memset) or two (memcpy, memmove) memory accesses in the
polyhedral model. These accesses have an access range that describes the
summarized effect of the intrinsic, i.e.,
memset(&A[i], '$', N);
is represented as a write access from A[i] to A[i+N].
Differential Revision: http://reviews.llvm.org/D5226
llvm-svn: 261489
To support non-aligned accesses we introduce a virtual element size
for arrays that divides each access function used for this array. The
adjustment of the access function based on the element size of the
array was therefore moved after this virtual element size was
determined, thus after all accesses have been created.
Differential Revision: http://reviews.llvm.org/D17246
llvm-svn: 261226
So far we separated constant factors from multiplications, however,
only when they are at the outermost level of a parameter SCEV. Now,
we also separate constant factors from the parameter SCEV if the
outermost expression is a SCEVAddRecExpr. With the changes to the
SCEVAffinator we can now improve the extractConstantFactor(...)
function at will without worrying about any other code part. Thus,
if needed we can implement a more comprehensive
extractConstantFactor(...) function that will traverse the SCEV
instead of looking only at the outermost level.
Four test cases were affected. One did not change much and the other
three were simplified.
llvm-svn: 260859
We now distinguish invariant loads to the same memory location if they
have different types. This will cause us to pre-load an invariant
location once for each type that is used to access it. However, we can
thereby avoid invalid casting, especially if an array is accessed
though different typed/sized invariant loads.
This basically reverts the changes in r260023 but keeps the test
cases.
llvm-svn: 260045
We also disable this feature by default, as there are still some issues in
combination with invariant load hoisting that slipped through my initial
testing.
llvm-svn: 260025
Always use access-instruction pointer type to load the invariant values.
Otherwise mismatches between ScopArrayInfo element type and memory access
element type will result in invalid casts. These type mismatches are after
r259784 a lot more common and also arise with types of different size, which
have not been handled before.
Interestingly, this change actually simplifies the code, as we now have only
one code path that is always taken, rather then a standard code path for the
common case and a "fixup" code path that replaces the standard code path in
case of mismatching types.
llvm-svn: 260009
The previously implemented approach is to follow value definitions and
create write accesses ("push defs") while searching for uses. This
requires the same relatively validity- and requirement conditions to be
replicated at multiple locations (PHI instructions, other instructions,
uses by PHIs).
We replace this by iterating over the uses in a SCoP ("pull in
requirements"), and add writes only when at least one read has been
added. It turns out to be simpler code because each use is only iterated
over once and writes are added for the first access that reads it. We
need another iteration to identify escaping values (uses not in the
SCoP), which also makes the difference between such accesses more
obvious. As a side-effect, the order of scalar MemoryAccess can change.
Differential Revision: http://reviews.llvm.org/D15706
llvm-svn: 259987
This allows code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To model such code we use as canonical element type of the modeled array the
smallest element type of all original array accesses, if type allocation sizes
are multiples of each other. Otherwise, we use a newly created iN type, where N
is the gcd of the allocation size of the types used in the accesses to this
array. Accesses with types larger as the canonical element type are modeled as
multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support code-generating these memory accesses, we introduce a new method
getAccessAddressFunction that assigns each statement instance a single memory
location, the address we load from/store to. Currently we obtain this address by
taking the lexmin of the access function. We may consider keeping track of the
memory location more explicitly in the future.
We currently do _not_ handle multi-dimensional arrays and also keep the
restriction of not supporting accesses where the offset expression is not a
multiple of the access element type size. This patch adds tests that ensure
we correctly invalidate a scop in case these accesses are found. Both types of
accesses can be handled using the very same model, but are left to be added in
the future.
We also move the initialization of the scop-context into the constructor to
ensure it is already available when invalidating the scop.
Finally, we add this as a new item to the 2.9 release notes
Reviewers: jdoerfert, Meinersbur
Differential Revision: http://reviews.llvm.org/D16878
llvm-svn: 259784
We support now code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To support such code we use as element type of the modeled array the smallest
element type of all original array accesses. Accesses with larger types are
modeled as multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support jscop-rewritable memory accesses we need each statement instance to
only be assigned a single memory location, which will be the address at which
we load the value. Currently we obtain this address by taking the lexmin of
the access function. We may consider keeping track of the memory location more
explicitly in the future.
llvm-svn: 259587
For schedule generation we assumed that the reverse post order traversal used by
the domain generation is sufficient, however it is not. Once a loop is
discovered, we have to completely traverse it, before we can generate the
schedule for any block/region that is only reachable through a loop exiting
block.
To this end, we add a "loop stack" that will keep track of loops we
discovered during the traversal but have not yet traversed completely.
We will never visit a basic block (or region) outside the most recent
(thus smallest) loop in the loop stack but instead queue such blocks
(or regions) in a waiting list. If the waiting list is not empty and
(might) contain blocks from the most recent loop in the loop stack the
next block/region to visit is drawn from there, otherwise from the
reverse post order iterator.
We exploit the new property of loops being always completed before additional
loops are processed, by removing the LoopSchedules map and instead keep all
information in LoopStack. This clarifies that we indeed always only keep a
stack of in-process loops, but will never keep incomplete schedules for an
arbitrary set of loops. As a result, we can simplify some of the existing code.
This patch also adds some more documentation about how our schedule construction
works.
This fixes http://llvm.org/PR25879
This patch is an modified version of Johannes Doerfert's initial fix.
Differential Revision: http://reviews.llvm.org/D15679
llvm-svn: 259354
Before adding a MK_Value READ MemoryAccess, check whether the read is
necessary or synthesizable. Synthesizable values are later generated by
the SCEVExpander and therefore do not need to be transferred
explicitly. This can happen because the check for synthesizability has
presumbly been forgotten in the case where a phi's incoming value has
been defined in a different statement.
Differential Revision: http://reviews.llvm.org/D15687
llvm-svn: 258998
Ensure that there is at most one phi write access per PHINode and
ScopStmt. In particular, this would be possible for non-affine
subregions with multiple exiting blocks. We replace multiple MAY_WRITE
accesses by one MUST_WRITE access. The written value is constructed
using a PHINode of all exiting blocks. The interpretation of the PHI
WRITE's "accessed value" changed from the incoming value to the PHI like
for PHI READs since there is no unique incoming value.
Because region simplification shuffles around PHI nodes -- particularly
with exit node PHIs -- the PHINodes at analysis time does not always
exist anymore in the code generation pass. We instead remember the
incoming block/value pair in the MemoryAccess.
Differential Revision: http://reviews.llvm.org/D15681
llvm-svn: 258809
Ensure there is at most one write access per definition of an
llvm::Value. Keep track of already created value write access by using
a (dense) map.
Replace addValueWriteAccess by ensureValueStore which can be uses more
liberally without worrying to add redundant accesses. It will be used,
e.g. in a logical correspondant for value reads -- ensureValueReload --
to ensure that the expected definition has been written when loading it.
Differential Revision: http://reviews.llvm.org/D15483
llvm-svn: 258807
The test case we look at does not necessarily require irreducible control flow,
but a normal loop is sufficient to create a non-affine region containing more
than one basic block that dominates the exit node. We replace this irreducible
control flow with a normal loop for the following reasons:
1) This is easier to understand
2) We will subsequently commit a patch that ensures Polly does not process
irreducible control flow.
Within non-affine regions, we could possibly handle irreducible control flow.
llvm-svn: 258496
ISL 0.16 will change how sets are printed which breaks 117 unit tests
that text-compare printed sets. This patch re-formats most of these unit
tests using a script and small manual editing on top of that. When
actually updating ISL, most work is done by just re-running the script
to adapt to the changed output.
Some tests that compare IR and tests with single CHECK-lines that can be
easily updated manually are not included here.
The re-format script will also be committed afterwards. The per-test
formatter invocation command lines options will not be added in the near
future because it is ad hoc and would overwrite the manual edits.
Ideally it also shouldn't be required anymore because ISL's set printing
has become more stable in 0.16.
Differential Revision: http://reviews.llvm.org/D16095
llvm-svn: 257851
Call assumeNoOutOfBound only in updateDimensionality to process situations
when new dimensions are added and new bounds checks are required.
Contributed-by: Tobias Grosser, Gareev Roman
llvm-svn: 257170
Scops that contain many complex branches are likely to result in complex domain
conditions that consist of a large (> 100) number of conjucts. Transforming
such domains is expensive and unlikely to result in efficient code. To avoid
long compile times we detect this case and skip such scops. In the future we may
improve this by either using non-affine subregions to hide such complex
condition structures or by exploiting in certain cases properties (e.g.,
dominance) that allow us to construct the domains of a scop in a way that
results in a smaller number improving conjuncts.
Example of a code that results in complex iteration spaces:
loop.header
/ | \ \
A0 A2 A4 \
\ / \ / \
A1 A3 \
/ \ / \ |
B0 B2 B4 |
\ / \ / |
B1 B3 ^
/ \ / \ |
C0 C2 C4 |
\ / \ / /
C1 C3 /
\ / /
loop backedge
llvm-svn: 256123
This reverts commit r255471.
Johannes raised in the post-commit review of r255471 the concern that PHI
writes in non-affine regions with two exiting blocks are not really MUST_WRITE,
but we just know that at least one out of the set of all possible PHI writes
will be executed. Modeling all PHI nodes as MUST_WRITEs is probably save, but
adding the needed documentation for such a special case is probably not worth
the effort. Michael will be proposing a new patch that ensures only a single
PHI_WRITE is created for non-affine regions, which - besides other benefits -
should also allow us to use a single well-defined MUST_WRITE for such PHI
writes.
(This is not a full revert, but the condition and documentation have been
slightly extended)
llvm-svn: 255503
LLVM's IR guarantees that a value definition occurs before any use, and
also the value of a PHI must be one of the incoming values, "written"
in one of the incoming blocks. Hence, such writes are never conditional
in the context of a non-affine subregion.
llvm-svn: 255471
When introducing separate control flow for the original and optimized code we
introduce now a special 'ExitingBlock':
\ /
EnteringBB
|
SplitBlock---------\
_____|_____ |
/ EntryBB \ StartBlock
| (region) | |
\_ExitingBB_/ ExitingBlock
| |
MergeBlock---------/
|
ExitBB
/ \
This 'ExitingBlock' contains code such as the final_reloads for scalars, which
previously were just added to whichever statement/loop_exit/branch-merge block
had been generated last. Having an explicit basic block makes it easier to
find these constructs when looking at the CFG.
llvm-svn: 255107
gfortran (and fortran in general?) does not compute the address of an array
element directly from the array sizes (e.g., %s0, %s1), but takes first the
maximum of the sizes and 0 (e.g., max(0, %s0)) before multiplying the resulting
value with the per-dimension array subscript expressions. To successfully
delinearize index expressions as we see them in fortran, we first filter 'smax'
expressions out of the SCEV expression, use them to guess array size parameters
and only then continue with the existing delinearization.
llvm-svn: 253995
Trying to build up access functions for any of these blocks is likely to fail,
as error blocks may contain invalid/non-representable instructions, and blocks
dominated by error blocks may reference such instructions, which wil also cause
failures. As all of these blocks are anyhow assumed to not be executed, we can
just remove them early on.
This fixes http://llvm.org/PR25596
llvm-svn: 253818
Only when we check for wrapping we want to use the store size, for all
other cases we use the alloc size now.
Suggested by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 252941
If an llvm.assume dominates the SCoP entry block and the assumed condition
can be expressed as an affine inequality we will now add it to the context.
Differential Revision: http://reviews.llvm.org/D14413
llvm-svn: 252851
Error blocks may contain arbitrary instructions, among them some which we can
not modeled correctly. As we do not generate ScopStmts for error blocks anyhow
there is no point in trying to generate access functions for them.
This fixes llvm.org/PR25494
llvm-svn: 252794
For complex inputs our current approach of construction the boundary context
may in rare cases become computationally so expensive that it is better to
abort. This change adds a compute out check that bounds the compuations we
spend on boundary context construction and bails out if this limit is reached.
We can probably make our boundary construction algorithm more efficient, but
this requires some more investigation and probably also some additional changes
to isl. Until these have been added, we bound the compile time to ensure our
buildbots are green.
llvm-svn: 252758
In certain rare cases (mostly -polly-process-unprofitable on large sequences
of conditions - often without any loop), we see some compile-time timeouts due
to the construction of an overly complex assumption context. This change limits
the number of disjuncts to 150 (adjustable), to prevent us from creating
assumptions contexts that are too large for even the compilation to finish.
The limit has been choosen as large as possible to make sure we do not
unnecessarily drop test coverage. If such cases also appear in
-polly-process-unprofitable=false mode we may need to think about this again,
as the current limitations may still allow assumptions that are way to complex
to be checked profitably at run-time.
There is also certainly room for improvement regarding how (and how efficient)
we construct an assumed context, but this requires some more thinking.
This completes llvm.org/PR25458
llvm-svn: 252750
Thinking more about the last commit I came to realize that for testing the
new functionality it is sufficient to verify that the iteration domains
we construct for a simple test case do not contain any of the complexity that
caused compile time issues for larger inputs.
llvm-svn: 252714
Previously, we just skipped error blocks during scop construction. With
this change we make sure we can construct domains for error blocks such that
these domains can be forwarded to subsequent basic blocks.
This change ensures that basic blocks that post-dominate and are dominated by
a basic block that branches to an error condition have the very same iteration
domain as the branching basic block. Before, this change we would construct
a domain that excludes all error conditions. Such domains could become _very_
complex and were undesirable to build.
Another solution would have been to drop these constraints using a
dominance/post-dominance check instead of modeling the error blocks. Such
a solution could also work in case of unreachable statements or infinite
loops in the scop. However, as we currently (to my believe incorrectly) model
unreachable basic blocks in the post-dominance tree, such a solution is not
yet feasible and requires first a change to LLVM's post-dominance tree
construction.
This commit addresses the most sever compile time issue reported in:
http://llvm.org/PR25458
llvm-svn: 252713
Especially for structs, the SAI object of a base pointer does not
describe all the types that the user might expect when he loads from
that base pointer. While we will still cast integers and pointers we
will now reload the value with the correct type if floating point and
non-floating point values are involved. However, there are now TODOs
where we use bitcasts instead of a proper conversion or reloading.
This fixes bug 25479.
llvm-svn: 252706
We now create all invariant equivalence classes for required invariant loads
instead of creating them on-demand. This way we can check if a parameter
references an invariant load that is actually not executed and was therefor
not materialized. If that happens the parameter is not materialized either.
This fixes bug 25469.
llvm-svn: 252701
In case we also model scalar reads it can happen that a pointer appears in both
a scalar read access as well as the base pointer of an array access. As this
is a little surprising, we add a specific test case to document this behaviour.
To my understanding it should be OK to have a read from an array A[] and
read/write accesses to A[...]. isl is treating these arrays as unrelated as
their dimensionality differs. This seems to be correct as A[] remains constant
throughout the execution of the scop and is not affected by the reads/writes to
A[...]. If this causes confusion, it might make sense to make this behaviour
more obvious by using different names (e.g., A_scalar[], A[...]).
llvm-svn: 252615
Memory references are now printed as follows:
Old New
Scalars: i64 MemRef_val[*] i64 MemRef_val;
Arrays: i64 MemRef_A[*][%m][%o][8] i64 MemRef_A[*][%m][%o];
We do not print any more information about the element size in the type. Such
information has already been available in a comment after the scalar/array
declaration. It was redundant and did not match well with what people were used
from C.
llvm-svn: 252602
Tobias Grosser