The domain generation used nullptr to mark the domain of an error block
as never-executed. Later, nullptr domains are recreated with a
zero-tuple domain that then mismatches with the expected domain the
error block within the loop.
Instead of using nullptr, assign an empty domain which preserves the
expected space. Remove empty domains during SCoP simplification.
Fixes llvm.org/PR38218.
llvm-svn: 338646
nullptr is not a valid affine expression, and none of the callers check
for null, so we eventually hit an isl error and crash.
Instead, invalidate the scop and return a constant zero.
Differential Revision: https://reviews.llvm.org/D46445
llvm-svn: 332309
The condition was introduced in r267142 to mitigate a long compile-time
case. In r306087, a max-computation limit was introduced that should
handle the same case while leaving the max disjuncts heuristic it
should have replaced intact.
Today, the max disjuncts bail-out causes problems in that it prematurely
stops SCoPs from being detected, e.g. in SPEC's lbm. This would hit less
like if isl_set_coalesce would be called after isl_set_remove_divs
(which makes more basic_set likely to be coalescable) instead of before.
This patch tries to remove the premature max-disjuncts bail-out
condition by using simple_hull() to reduce the computational overhead,
instead of directly invalidating that SCoP.
Differential Revision: https://reviews.llvm.org/D45066
Contributed-by: Sahil Girish Yerawar <cs15btech11044@iith.ac.in>
llvm-svn: 331891
This test case does not require undef to be present in branch
conditions. Replace these undef values with true/false values to clarify
the control-flow required to reach the loop under testing.
llvm-svn: 331744
The current statement domain derivation algorithm does not (always)
consider that different exit blocks of a loop can have different
conditions to be reached.
From the code
for (int i = n; ; i-=2) {
if (i <= 0) goto even;
if (i <= 1) goto odd;
A[i] = i;
}
even:
A[0] = 42;
return;
odd:
A[1] = 21;
return;
Polly currently derives the following domains:
Stmt_even_critedge
Domain :=
[n] -> { Stmt_even_critedge[] };
Stmt_odd
Domain :=
[n] -> { Stmt_odd[] : (1 + n) mod 2 = 0 and n > 0 };
while the domain for the odd case is correct, Stmt_even is assumed to be
executed unconditionally, which is obviously wrong. While projecting out
the loop dimension in `adjustDomainDimensions`, it does not consider
that there are other exit condition that have matched before.
I don't know a how to fix this without changing a lot of code. Therefore
This patch rejects loops with multiple exist blocks to fix the
miscompile of test-suite's uuencode.
The odd condition is transformed by LLVM to
%cmp1 = icmp eq i64 %indvars.iv, 1
such that the project_out in adjustDomainDimensions() indeed only
matches for odd n (using this condition only, we'd have an infinite loop
otherwise).
The even condition manifests as
%cmp = icmp slt i64 %indvars.iv, 3
Because buildDomainsWithBranchConstraints() does not consider other exit
conditions, it has to assume that the induction variable will eventually
be lower than 3 and taking this exit.
IMHO we need to reuse the algorithm that determines the number of
iterations (addLoopBoundsToHeaderDomain) to determine which exit
condition applies first. It has to happen in
buildDomainsWithBranchConstraints() because the result will need to
propagate to successor BBs. Currently addLoopBoundsToHeaderDomain() just
look for union of all backedge conditions (which means leaving not the
loop here). The patch in llvm.org/PR35465 changes it to look for exit
conditions instead. This is required because there might be other exit
conditions that do not alternatively go back to the loop header.
Differential Revision: https://reviews.llvm.org/D45649
llvm-svn: 330858
Add the switch -polly-debug-func to define the name of a debug
function. This function is ignored for any validity check.
Its purpose is to allow to observe a value after transformation by a
SCoP, and to follow which statements are executed in which order. For
instance, consider the following code:
static void dbg_printf(int sum, int i) {
fprintf(stderr, "The value of sum is %d, i=%d\n", sum, i);
fflush(stderr);
}
void func(int n) {
int sum = 0;
for (int i = 0; i < 16; i+=1) {
sum += i;
dbg_printf(sum, i);
}
}
Executing this after Polly's codegen with -polly-debug-func=dbg_printf
reveals the new execution order and the assumed values at that point of
execution.
Differential Revision: https://reviews.llvm.org/D45728
llvm-svn: 330466
Commit r329640 introduced the removal of all MemoryAccesses of a Scop.
It accidentally continued iterating over a vector whose iterators
have been invalidated by a MemoryAccess removal.
Make a copy of the MemoryAccesses to remove to iterate over while
removing them.
llvm-svn: 329653
Removing a statement left its MemoryAccesses in some lists and maps of
the SCoP. Which lists depends on at which phase of the SCoP
construction the statement is deleted. Follow-up passes could still see
the already deleted MemoryAccesses by iterating through these
lists/maps, resulting in an access violation.
When removing a ScopStmt, also remove all its MemoryAccesses by using
the same mechnism that removes a MemoryAccess.
llvm-svn: 329640
This patch removes the heuristic in
- Polly :: lib/Support/ScopHelper.cpp
The heuristic forces blocks that directly follow a loop header to not to be considered error blocks.
It was introduced in r249611 with the following commit message:
> This replaces the support for user defined error functions by a
> heuristic that tries to determine if a call to a non-pure function
> should be considered "an error". If so the block is assumed not to be
> executed at runtime. While treating all non-pure function calls as
> errors will allow a lot more regions to be analyzed, it will also
> cause us to dismiss a lot again due to an infeasible runtime context.
> This patch tries to limit that effect. A non-pure function call is
> considered an error if it is executed only in conditionally with
> regards to a cheap but simple heuristic.
In the code below `CCK_Abort2()` would be considered as an error block, but not `CCK_Abort1()` due to this heuristic.
```
for (int i = 0; i < n; i+=1) {
if (ErrorCondition1)
CCK_Abort1(); // No __attribute__((noreturn))
if (ErrorCondition2)
CCK_Abort2(); // No __attribute__((noreturn))
}
```
This does not seem useful. Checking error conditions in the beginning of some work is quite common. It causes a switch default-case to be not considered an error block in SPEC's cactuBSSN. The comment justifying the heuristic mentions a "load", which does not seem to be applicable here. It has been proposed to remove the heuristic.
In addition, the patch fixes the following test cases:
- Polly :: ScopDetect/mod_ref_read_pointer.ll
- Polly :: ScopInfo/max-loop-depth.ll
- Polly :: ScopInfo/mod_ref_access_pointee_arguments.ll
- Polly :: ScopInfo/mod_ref_read_pointee_arguments.ll
- Polly :: ScopInfo/mod_ref_read_pointer.ll
- Polly :: ScopInfo/mod_ref_read_pointers.ll
The test cases failed after removing the heuristic.
Differential Revision: https://reviews.llvm.org/D45274
Contributed-by: Lorenzo Chelini <l.chelini@icloud.com>
llvm-svn: 329548
isl does not guarantee that set dimension ids will be preserved, so using them
to carry information is not a good idea. Furthermore, the loop information can
be derived without problem from the statement itself. As this even requires
less code than propagating loop information on set dimension ids, starting from
this commit we just derive the loop information in collectSurroundingLoops
directly from the IR.
Interestingly this also results in a couple of isl sets to take a simpler
representation.
llvm-svn: 326664
This update:
- Removes several deprecated functions (e.g., isl_band).
- Improves the pretty-printing of sets by detecting modulos and "false"
equalities.
- Minor improvements to coalescing and increased robustness of the isl
scheduler.
This update does not yet include isl commit isl-0.18-90-gd00cb45
(isl_pw_*_alloc: add missing check for compatible spaces, Wed Sep 6 12:18:04
2017 +0200), as this additional check is too tight and unfortunately causes
two test case failures in Polly. A patch has been submitted to isl and will be
included in the next isl update for Polly.
llvm-svn: 325557
Two or more PHIs mutually using each other directly or indirectly as
incoming value could cause that a PHI WRITE be added before the PHI READ
(i.e. it overwrites the current incoming value with the next incoming
value before it being read).
Fix by ensuring that the PHI WRITE and PHI READ are in the same statement.
This should fix the miscompile of SingleSource/Benchmark/Misc/whetstone
from the test-suite.
llvm-svn: 324934
Splitting basic blocks into multiple statements if there are now
additional scalar dependencies gives more freedom to the scheduler, but
more statements also means higher compile-time complexity. Switch to
finer statement granularity, the additional compile time should be
limited by the number of operations quota.
The regression tests are written for the -polly-stmt-granularity=bb
setting, therefore we add that flag to those tests that break with the
new default. Some of the tests only fail because the statements are
named differently due to a basic block resulting in multiple statements,
but which are removed during simplification of statements without
side-effects. Previous commits tried to reduce this effect, but it is
not completely avoidable.
Differential Revision: https://reviews.llvm.org/D42151
llvm-svn: 324169
Theoretically, a PHI write can be added to any statement that represents
the incoming basic block. We previously always chose the last because
the incoming value's definition is guaranteed to be defined.
With this patch the PHI write is added to the statement that defines the
incoming value. It avoids the requirement for a scalar dependency between
the defining statement and the statement containing the write. As such the
logic for -polly-stmt-granularity=scalar-indep that ensures that there is
such scalar dependencies can be removed.
Differential Revision: https://reviews.llvm.org/D42147
llvm-svn: 323284
Summary:
Upstream LLVM is changing the the prototypes of the @llvm.memcpy/memmove/memset
intrinsics. This change updates the polly tests for this change.
The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument
which is required to be a constant integer. It represents the alignment of the
dest (and source), and so must be the minimum of the actual alignment of the
two.
This change removes the alignment argument in favour of placing the alignment
attribute on the source and destination pointers of the memory intrinsic call.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false)
will now read
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false)
At this time the source and destination alignments must be the same (Step 1).
Step 2 of the change, to be landed shortly, will relax that contraint and allow
the source and destination to have different alignments.
llvm-svn: 322963
The goal is to have -polly-stmt-granularity=bb and
-polly-stmt-granularity=scalar-indep to have the same names if there is
just one statement per basic block.
This fixes a fluke when Polybench's jacobi-2d is optimized differently
depending on the -polly-stmt-granularity option, although both options
create the same SCoP, just with different statement names.
The new naming scheme is:
With -polly-use-llvm-names=0:
Stmt<BBIdx as decimal><Idx within BB as letter>
With -polly-use-llvm-names=1:
Stmt_BBName_<Idx within BB as letter>
The <Idx within BB> suffix is omitted for the main statement of a BB. The
main statement is either the one containing the first store or call
(those cannot be removed by the simplifyer), or if there is no such
instruction, the first. If after simplification there is just a single
statement left, it should be the main statement and have the same names as
with -polly-stmt-granularity=bb.
Differential Revision: https://reviews.llvm.org/D42136
llvm-svn: 322852
isl_val_get_num_si crashes on overflow, so don't use it on arbitrary
integers.
Testcase only crashes on platforms where long is 32 bits because of the
signature of isl_val_get_num_si; not sure if it's possible to write a
testcase which crashes if long is 64 bits.
There are a few other places in polly which use isl_val_get_num_si;
they probably need to be fixed as well. I don't think polly uses any
of the other "long" isl APIs in an unsafe manner.
Differential Revision: https://reviews.llvm.org/D42129
llvm-svn: 322766
The option splits BasicBlocks into minimal statements such that no
additional scalar dependencies are introduced.
The algorithm is based on a union-find structure, and unites sets if
putting them into separate statements would introduce a scalar
dependencies. As a consequence, instructions may be split into separate
statements such their relative order is different than the statements
they are in. This is accounted for instructions whose relative order
matters (e.g. memory accesses).
The algorithm is generic in that heuristic changes can be made
relatively easily. We might relax the order requirement for read-reads
or accesses to different base pointers. Forwardable instructions can be
made to not cause a join.
This implementation gives us a speed-up of 82% in SPEC 2006 456.hmmer
benchmark by allowing loop-distribution in a hot loop such that one of
the loops can be vectorized.
Differential Revision: https://reviews.llvm.org/D38403
llvm-svn: 314983
Create the MemoryAccesses of invariant loads separately and before
all other MemoryAccesses.
Invariant loads are classified as synthesizable and therefore are not
contained in any statement. When iterating over all instructions of all
statements, the invariant loads are consequently not processed and
iterating over them separately becomes necessary.
This patch can change the order in which MemoryAccesses are created, but
otherwise has no functional change.
Some temporary code is introduced to ensure correctness, but will be
removed in the next commit.
llvm-svn: 314664
Instructions that compute escaping values might be synthesizable and
therefore not contained in any ScopStmt. When buildAccessFunctions is
changed to only iterate over the instruction list of statement,
"free" instructions still need to be written. We do this after the
main MemoryAccesses have been created.
This can change the order in which MemoryAccesses are created, but has
otherwise no functional change.
llvm-svn: 314663
In case a PHI node follows an error block we can assume that the incoming value
can only come from the node that is not an error block. As a result, conditions
that seemed non-affine before are now in fact affine.
This is a recommit of r312663 after fixing
test/Isl/CodeGen/phi_after_error_block_outside_of_scop.ll
llvm-svn: 314075
Such RTCs may introduce integer wrapping intrinsics with more than 64 bit,
which are translated to library calls on AOSP that are not part of the
runtime and will consequently cause linker errors.
Thanks to Eli Friedman for reporting this issue and reducing the test case.
llvm-svn: 314065
This reverts commit
r312410 - [ScopDetect/Info] Look through PHIs that follow an error block
The commit caused generation of invalid IR due to accessing a parameter
that does not dominate the SCoP.
llvm-svn: 312663
In case a PHI node follows an error block we can assume that the incoming value
can only come from the node that is not an error block. As a result, conditions
that seemed non-affine before are now in fact affine.
llvm-svn: 312410
Mark scalar dependences for different statements belonging to same BB
as 'Inter'.
Contributed-by: Nandini Singhal <cs15mtech01004@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D37147
llvm-svn: 312324
By using statement lists in the entry blocks of region statements, instruction
level analyses also work on region statements.
We currently only model the entry block of a region statements, as this is
sufficient for most transformations the known-passes currently execute. Modeling
instructions in the presence of control flow (e.g. infinite loops) is left
out to not increase code complexity too much. It can be added when good use
cases are found.
This change set is reapplied, after a memory corruption issue had been fixed.
llvm-svn: 312210
By using statement lists in the entry blocks of region statements, instruction
level analyses also work on region statements.
We currently only model the entry block of a region statements, as this is
sufficient for most transformations the known-passes currently execute. Modeling
instructions in the presence of control flow (e.g. infinite loops) is left
out to not increase code complexity too much. It can be added when good use
cases are found.
llvm-svn: 312128
This patch allows annotating of metadata in ir instruction
(with "polly_split_after"), which specifies where to split a particular
scop statement.
Contributed-by: Nandini Singhal <cs15mtech01004@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D36402
llvm-svn: 312107
Dragonegg generates most function parameters as pointers to the actual
parameters. However, it does not mark these parameters with the
dereferencable attribute.
Polly is conservative when it comes to invariant load
hoisting, thus we add runtime checks to invariant load hoisted pointers
when we do not know that pointers are dereferencable. This is correct behaviour,
but is a performance penalty.
Add a flag that allows all pointer parameters to be dereferencable. That
way, polly can speculatively load-hoist paramters to functions without
runtime checks.
Differential Revision: https://reviews.llvm.org/D36461
llvm-svn: 311329
In the following loop:
int i;
for (i = 0; i < func(); i+=1)
;
SCoP:
for (int j = 0; j<n; j+=1)
S(i, j)
The value i is synthesizable in the SCoP that includes only the j-loop.
This is because i is fixed within the SCoP, it is irrelevant whether
it originates from another loop.
This fixes a strange case where a PHI was synthesiable in a SCoP,
but not its incoming value, triggering an assertion.
This should fix MultiSource/Applications/sgefa/sgefa of the
perf-x86_64-penryn-O3-polly-before-vectorizer-unprofitable buildbot.
llvm-svn: 309109
Summary:
For the ScopInfo lit testsuite, this patch removes some dependences on output behaviour of the legacy PM.
In most cases, these tests checked the tool output for labels created by the pass printer in the legacy PM. This doesn't work for the new PM anymore. Untangling the testcases is the first step to porting the testsuite for the new PM infrastructure.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser
Subscribers: llvm-commits, pollydev
Tags: #polly
Differential Revision: https://reviews.llvm.org/D35727
llvm-svn: 308754
When performing invariant load hoisting we check that invariant load expressions
are not too complex. Up to this commit, we performed this check by counting the
sum of dimensions in the access range as a very simple heuristic. This heuristic
is a little too conservative, as it prevents hoisting for any scops with a
very large number of parameters. Hence, we update the heuristic to only count
existentially quantified dimensions and set dimensions. We expect this to still
detect the problematic expressions in h264 because of which this check was
originally introduced.
For some unknown reason, this complexity check was originally committed in
IslNodeBuilder. It really belongs in ScopInfo, as there is no point in
optimizing a program which we could have known earlier cannot be code generated.
The benefit of running the check early is that we can avoid to even hoist checks
that are expensive to code generate as invariant loads. This can be seen in
the changed tests, where we now indeed detect the scop, but just not invariant
load hoist the complicated access.
We also improve the formatting of the code, document it, and use isl++ to
simplify expressions.
llvm-svn: 308659
This is one possible solution to implement wrap-arounds for integers in
unsigned icmp operations. For example,
store i32 -1, i32* %A_addr
%0 = load i32, i32* %A_addr
%1 = icmp ult i32 %0, 0
%1 should hold false, because under the assumption of unsigned integers,
-1 should wrap around to 2^32-1. However, previously. it was assumed
that the MSB (Most Significant Bit - aka the Sign bit) was never set for
integers in unsigned operations.
This patch modifies the buildConditionSets function in ScopInfo.cpp to
give better information about the integers in these unsigned
comparisons.
Contributed-by: Annanay Agarwal <cs14btech11001@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D35464
llvm-svn: 308608
Utilizing newer LLVM diagnostic remark API in order to enable use of
opt-viewer tool. Polly Diagnostic Remarks also now appear in YAML
remark file.
In this patch, I've added the OptimizationRemarkEmitter into certain
classes where remarks are being emitted and update the remark emit calls
itself. I also provide each remark a BasicBlock or Instruction from where
it is being called, in order to compute the hotness of the remark.
Patch by Tarun Rajendran!
Differential Revision: https://reviews.llvm.org/D35399
llvm-svn: 308233
We need to relax constraints on invariant loads so that they do not
create fake RAW dependences. So, we do not consider invariant loads as
scalar dependences in a region.
During these changes, it turned out that we do not consider `llvm::Value`
replacements correctly within `PPCGCodeGeneration` and `ISLNodeBuilder`.
The replacements dictated by `ValueMap` were not being followed in all
places. This was fixed in this commit. There is no clean way to decouple
this change because this bug only seems to arise when the relaxed
version of invariant load hoisting was enabled.
Differential Revision: https://reviews.llvm.org/D35120
llvm-svn: 307907
This test fails, if polly is not linked into LLVM's tools. Our
lit site-config already deals with this by not adding the -load
option, if polly is linked into LLVM's tools.
llvm-svn: 306395
This reduces the compilation time of one reduced test case from Android from
16 seconds to 100 mseconds (we bail out), without negatively impacting any
other test case we currently have.
We still saw occasionally compilation timeouts on the AOSP buildbot. Hopefully,
those will go away with this change.
llvm-svn: 306235
r303971 added an assertion that SCEV addition involving an AddRec
and a SCEVUnknown must involve a dominance relation: either the
SCEVUnknown value dominates the AddRec's loop, or the AddRec's
loop header dominates the SCEVUnknown. This is generally fine
for most usage of SCEV because it isn't possible to write an
expression in IR which would violate it, but it's a bit inconvenient
here for polly.
To solve the issue, just avoid creating a SCEV expression which
triggers the asssertion.
I'm not really happy with this solution, but I don't have any better
ideas.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33464.
Differential Revision: https://reviews.llvm.org/D34259
llvm-svn: 305864
In r304074 we introduce a patch to accept results from side effect free
functions into SCEV modeling. This causes rejection of cases where the
call is happening outside the SCoP. This patch checks if the call is
outside the Region and treats the results as a parameter (SCEVType::PARAM)
to the SCoP instead of returning SCEVType::INVALID.
Patch by Sameer Abu Asal.
llvm-svn: 305423
Ignored intrinsics are ignored at code generation, therefore do not
need to be part of the instruction list.
Specifically, llvm.lifetime.* intrinisics are removed before code
generation, referencing them would cause a use-after-free error.
Contributed-by: Nandini Singhal <cs15mtech01004@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D33768
llvm-svn: 304483