The max loop depth was incorrectly computed for scops that contain a
block from a loop but do not contain the entire loop. We need to
check that the full loop is contained in the region when computing
the max loop depth.
These scops occur when a region containing an inner loop is expanded
to include some blocks from the outer loop, but it cannot be fully
expanded to contain the outer loop because the region containing the
outer loop is invalid.
Differential Revision: http://reviews.llvm.org/D6913
llvm-svn: 225812
This support is still incomplete and consequently hidden behind a switch that
needs to be enabled. One problem is ATM that we incorrectly interpret very large
unsigned values as negative values even if used in an unsigned comparision.
llvm-svn: 225480
Schedule dimensions that have the same constant value accross all statements do
not carry any information, but due to the increased dimensionality of the
schedule cost compile time. To not pay this cost, we remove constant dimensions
if possible.
llvm-svn: 225067
Isl now specifically marks modulo operations that are compared against zero.
They can be implemented with the C/LLVM remainder operation.
We also update a couple of test cases where the output of isl has slightly
changed.
llvm-svn: 223607
This commit drops the Cloog support for Polly. The scripts and
documentation are changed to only use isl as prerequisity. In the code
all Cloog specific parts have been removed and all relevant tests have
been ported to the isl backend when it was created.
llvm-svn: 223141
SCEV based code generation has been the default for two weeks after having
been tested for a long time. We now drop the support the non-scev-based code
generation.
llvm-svn: 222978
In TempScopInfo::buildCondition we extract the conditions to guard the
BB *in addition of* loop bounds. This means we should only consider the
conditions in the paths (in CFG) that do not contain cycles (loops).
At the same time, we set the invert flag if the FalseBB of the current
branch dominates our target BB to indicate that we reach the target BB
with an inverted condition from the current branch.
In this case, the path from the FalseBB contains a cycle if the FalseBB
is the target of a backedge. The conditions implied by such a path should
not be consider. We can identify such a case by checking if the TrueBB
also dominates our target BB, which means we can also reach our target
BB from the TrueBB, without going through the backedge.
llvm-svn: 222907
In case a GEP instruction references into a fixed size array e.g., an access
A[i][j] into an array A[100x100], LLVM-IR does not guarantee that the subscripts
always compute values that are within array bounds. We now derive the set of
parameter values for which all accesses are within bounds and add the assumption
that the scop is only every executed with this set of parameter values.
Example:
void foo(float A[][20], long n, long m {
for (long i = 0; i < n; i++)
for (long j = 0; j < m; j++)
A[i][j] = ...
This loop yields out-of-bound accesses if m is at least 20 and at the same time
at least one iteration of the outer loop is executed. Hence, we assume:
n <= 0 or m <= 20.
Doing so simplifies the dependence analysis problem, allows us to perform
more optimizations and generate better code.
TODO: The location where the GEP instruction is executed is not necessarily the
location where the memory is actually accessed. As a result scanning for GEP[s]
is imprecise. Even though this is not a correctness problem, this imprecision
may result in missed optimizations or non-optimal run-time checks.
In polybench where this mismatch between parametric loop bounds and fixed size
arrays is common, we see with this patch significant reductions in compile time
(up to 50%) and execution time (up to 70%). We see two significant compile time
regressions (fdtd-2d, jacobi-2d-imper), and one execution time regression
(trmm). Both regressions arise due to additional optimizations that have been
enabled by this patch. They can be addressed in subsequent commits.
http://reviews.llvm.org/D6369
llvm-svn: 222754
This patch includes tests where we actually need to adjust the CHECK lines
for SCEV based code generation. Besides these adjustments we add explicit
calls to -polly-codegen-scev=[true|false] and make sure we test both cases.
llvm-svn: 222112
This prevents SCEVs to reference values not valid any more and as a consequence
solves a bug where such values reintroduced during ast generation caused the
independent blocks pass to fail validation.
http://llvm.org/PR21204
llvm-svn: 222103
The isl based backend has been tested since a long time and with the recently
commited OpenMP support the last missing piece of functionality was ported from
the CLooG backend.
The isl based backend gives us interesting new functionality:
- Run-time alias checks (enabled by default)
Optimize scops that contain possibly aliasing pointers. This feature has
largely increased the number of loop nests we consider for optimization.
Thanks Johannes!
- Delinearization (not yet enabled by default)
Model accesses to multi-dimensional arrays precisely. This will allow us to
understand kernels with multi-dimensional VLAs written in Julia, boost::ublas,
coremark or C99.
Thanks Sebastian!
- Generation of higher quality code
Sven and me spent a long time to optimize the quality of the generated code. A
major focus were expressions as they result from modulos/divisions or
piecewise affine expressions (a ? b : c).
- Full/Partial tile separation, polyhedral unrolling
The isl code generation provides functionality to generate specialized code
for core and cleanup loops and to specialize code using polyhedral context
information while unrolling statements.
(not yet exploited in Polly)
- Modifieable access functions
We can now use standard isl functionality to remap memory accesses to new
data locations. A standard use case is the use of shared memory, where
accesses to a larger region in global memory need to be mapped to a smaller
shared memory region using a modulo mapping.
(not yet exploited in Polly)
The cloog based code generation is still available for comparision, but is
scheduled for removal.
llvm-svn: 222101
Instead of parallelizing every parallel outermost loop, we now use a very
minimalistic cost model. Specifically, we assume innermost loops are not
worth parallelising and all non-innermost loops are.
When parallelizing all loops in LNT we got several slowdowns/timeouts due to
us parallelizing innermost loops that are executed only a couple of times
(number of iterations not known statically). With this basic heuristic enabled
LNT does not show any more timeouts, while several interesting loops are still
parallelized.
There are many ways to obtain an improved heuristic. Constructing such an
improvide heuristic from a position of minimal slow-down and zero code size
increase seems to be the best, as it allows us to track progress on LNT.
llvm-svn: 222096
This backend supports besides the classical code generation the upcoming SCEV
based code generation (which the existing CLooG backend does not support
robustly).
OpenMP code generation in the isl backend benefits from our run-time alias
checks such that the set of loops that can possibly be parallelized is a lot
larger.
The code was tested on LNT. We do not regress on builds without -polly-parallel.
When using -polly-parallel most tests work flawlessly, but a few issues still
remain and will be addressed in follow up commits.
SCEV/non-SCEV codegen:
- Compile time failure in ldecod and TimberWolfMC due a problem in our
run-time alias check generation triggered by pointers that escape through
the OpenMP subfunction (OpenMP specific).
- Several execution time failures. Due to the larger set of loops that we now
parallelize (compared to the classical code generation), we currently run
into some timeouts in tests with a lot loops that have a low trip count and
are slowed down by parallelizing them.
SCEV only:
- One existing failure in lencod due to llvm.org/PR21204 (not OpenMP specific)
OpenMP code generation is the last feature that was only available in the CLooG
backend. With the isl backend being the only one supporting features such as
run-time alias checks and delinearization, we will soon switch to use the isl
ast generator by the default and subsequently remove our dependency on CLooG.
http://reviews.llvm.org/D5517
llvm-svn: 222088
Polly was accidently modifying a debug info metadata node when
attempting to generate a new unique metadata node for the loop id.
The problem was that we had dwarf metadata that referred to a
metadata node with a null value, like this:
!6 = ... some dwarf metadata referring to !7 ...
!7 = {null}
When we attempt to generate a new metadata node, we reserve the
first space for self-referential node by setting the first argument
to null and then mutating the node later to refer to itself.
However, because the nodes are uniqued based on pointer values, when
we get the new metadata node it actually referred to an existing
node (!7 in the example). When we went to modify the metadata to
point to itself, we were accidently mutating the dwarf metatdata. We
ended up in this situation:
!6 = ... some dwarf metadata referring to !7 ...
!7 = {!7}
and this causes an assert when generating the debug info. The fix is
simple, we just need to use a unique value when getting a new
metadata node. The MDNode::getTemporary() provides exactly the API
we need (and it is used in clang to generate the unique nodes).
Differential Revision: http://reviews.llvm.org/D6174
llvm-svn: 221550
We introduces a new flag -polly-parallel and use it to annotate the for-nodes in
the isl ast that we want to execute thread parallel (e.g., using OpenMP). We
previously already emmitted openmp annotations, but we did this for various
kinds of parallel loops, including some which we can not run in parallel.
With this patch we now have three annotations:
1) #pragma known-parallel [reduction]
2) #pragma omp for
3) #pragma simd
meaning:
1) loop has no loop carried dependences
2) loop will be executed thread-parallel
3) loop can possibly be vectorized
This patch introduces 1) and reduces the use of 2) to only the cases where we
will actually generate thread parallel code.
It is in preparation of openmp code generation in our isl backend.
Legacy:
- We also have a command line option -enable-polly-openmp. This option controls
the OpenMP code generation in CLooG. It will become an alias of
-polly-parallel after the CLooG code generation has been dropped.
http://reviews.llvm.org/D6142
llvm-svn: 221479
This patch moves the SCEV based (re)generation of values before the checking for
scop-constant terms. It enables us to provide SCEV based replacements, which
are necessary to correctly generate OpenMP subfunctions when using the SCEV
based code generation.
When recomputing a new value for a value used in the code of the original scop,
we previously directly returned the same original value for all scop-constant
expressions without even trying to regenerate these values using our SCEV
expression. This is correct when the newly generated code remains fully in the
same function, however in case we want to outline parts of the newly generated
scop into subfunctions, this approach means we do not have any opportunity to
update these values in the SCEV based code generation. (In the non-SCEV based
code generation, we can provide such updates through the GlobalMap). To ensure
we have this opportunity, we first try to regenerate scalar terms with our SCEV
builder and will only return scop-constant expressions if SCEV based code
generation was not possible.
This change should not affect the results of the existing code generation
passes. It only impacts the upcoming OpenMP based code generation.
This commit also adds a test case. This test case passes before and after this
commit. It was added to ensure test coverage for the changed code.
llvm-svn: 221393
This patch changes the RegionSet type used in ScopDetection from a
std::set to a llvm::SetVector. The reason for the change is to
ensure deterministic output when printing the result of the
analysis. We had a windows buildbot failure for the modified test
because the output was coming in a different order.
Only one test case needed to be modified for this change. We could
use CHECK-DAG directives instead of CHECK in the analysis test cases
because the actual order of scops does not matter, but I think that
change should be done in a separate patch that modifies all the
appliciable tests. I simply modified the test to reflect the
expected deterministic output.
Differential Revision: http://reviews.llvm.org/D5897
llvm-svn: 220423
We restricted the new access functions to be a subset of the old one
because we want to keep the alignment, however if the alignment is
"not special", thus the default for the type, we can allow any access.
Differential Revision: http://reviews.llvm.org/D5680
llvm-svn: 219503
In case the pieceweise affine function used to create an isl_ast_expr
had empty cases (e.g., with contradicting constraints on the
parameters), it was possible that the condition of the isl_ast_expr
select was not a comparison but a constant (thus of type i64).
This patch does two thing:
1) Handle the case the condition of a select is not a i1 type like C.
2) Try to simplify the pieceweise affine functions for the min/max
access when we generate runtime alias checks. That step can often
remove empty or redundant cases as well as redundant constrains.
This fixes bug: http://llvm.org/PR21167
Differential Revision: http://reviews.llvm.org/D5627
llvm-svn: 219208
This resolved the issues with delinearized accesses that might alias,
thus delinearization doesn't deactivate runtime alias checks anymore.
Differential Revision: http://reviews.llvm.org/D5614
llvm-svn: 219078
This class allows to store information about the arrays in the SCoP.
For each base pointer in the SCoP one object is created storing the
type and dimension sizes of the array. The objects can be obtained via
the SCoP, a MemoryAccess or the isl_id associated with the output
dimension of a MemoryAccess (the description of what is accessed).
So far we use the information in the IslExprBuilder to create the
right base type before indexing into the base array. This fixes the
bug http://llvm.org/bugs/show_bug.cgi?id=21113 (both test cases are
included). On top of that we can now build runtime alias checks for
delinearized arrays as the dimension sizes are also part of the
ScopArrayInfo objects.
Differential Revision: http://reviews.llvm.org/D5613
llvm-svn: 219077
Update debug info testcases for the LLVM metadata schema change in
r219010 to fold metadata constant operands into a single `MDString`.
Part of PR17891.
llvm-svn: 219019
+ Generalized function names and comments
+ Removed OpenMP (omp) from the names and comments
+ Use common names (non OpenMP specific) for runtime library call creation
methodes
+ Commented the parallel code generator and all its member functions
+ Refactored some values and methodes
Differential Revision: http://reviews.llvm.org/D4990
llvm-svn: 219003
This also forbids the json importer to access other memory locations
than the original instruction as we to reuse the alignment of the
original load/store.
Differential Revision: http://reviews.llvm.org/D5560
llvm-svn: 218883
The command line flag -polly-annotate-alias-scopes controls whether or not
Polly annotates alias scopes in the new SCoP (default ON). This can improve
later optimizations as the new SCoP is basically an alias free environment for
them.
llvm-svn: 218877
This change allows to annotate all parallel loops with loop id metadata.
Furthermore, it will annotate memory instructions with
llvm.mem.parallel_loop_access metadata for all surrounding parallel loops.
This is especially usefull if an external paralleliser is used.
This also removes the PollyLoopInfo class and comments the
LoopAnnotator.
A test case for multiple parallel loops is attached.
llvm-svn: 218793
We use a parametric abstraction of the domain to split alias groups
if accesses cannot be executed under the same parameter evaluation.
The two test cases check that we can remove alias groups if the
pointers which might alias are never accessed under the same parameter
evaluation and that the minimal/maximal accesses are not global but
with regards to the parameter evaluation.
Differential Revision: http://reviews.llvm.org/D5436
llvm-svn: 218758
If there are multiple read only base addresses in an alias group
we can split it into multiple alias groups each with only one
read only access. This way we might reduce the number of
comparisons significantly as it grows linear in the number of
alias groups but exponential in their size.
Differential Revision: http://reviews.llvm.org/D5435
llvm-svn: 218757
If too many parameters are involved in accesses used to create RTCs
we might end up with enormous compile times and RTC expressions.
The reason is that the lexmin/lexmax is dependent on all these
parameters and isl might need to create a case for every "ordering"
of them (e.g., p0 <= p1 <= p2, p1 <= p0 <= p2, ...).
The exact number of parameters allowed in accesses is defined by the
command line option -polly-rtc-max-parameters=XXX and set by default
to 8.
Differential Revision: http://reviews.llvm.org/D5500
llvm-svn: 218566
The run-time alias check places code that involves the base pointer at the
beginning of the SCoP. This breaks if the base pointer is defined inside the
SCoP. Hence, we can only create a run-time alias check if we are sure the base
pointer is not an instruction defined inside the scop. If it is we refuse to
handle the SCoP.
This commit should unbreak most of our current LNT failures.
Differential Revision: http://reviews.llvm.org/D5483
llvm-svn: 218412
This fixes two problems which are usualy caused together:
1) The elements of an isl AST access expression could be pointers
not only integers, floats and vectores thereof.
2) The runtime alias checks need to compare pointers but if they
are of a different type we need to cast them into a "max" type
similar to the non pointer case.
llvm-svn: 218113
This commit drops a call to std::sort, which sorted the base pointers that
possibly alias according to the address at which their corresponding llvm::Value
was allocated. There does not seem to be any good reason, why those pointers
should be (re)sorted and this only makes the output indeterministic.
llvm-svn: 218052
This change will build all alias groups (minimal/maximal accesses
to possible aliasing base pointers) we have to check before
we can assume an alias free environment. It will also use these
to create Runtime Alias Checks (RTC) in the ISL code generation
backend, thus allow us to optimize SCoPs despite possibly aliasing
pointers when this backend is used.
This feature will be enabled for the isl code generator, e.g.,
--polly-code-generator=isl, but disabled for:
- The cloog code generator (still the default).
- The case delinearization is enabled.
- The case non-affine accesses are allowed.
llvm-svn: 218046
We use SplitEdge to split a conditional entry edge of the SCoP region.
However, SplitEdge can cause two different situations (depending on
whether or not the edge is critical). This patch tests
which one is present and deals with the former unhandled one.
It also refactors and unifies the case we have to change the basic
blocks of the SCoP to new ones (see replaceScopAndRegionEntry).
llvm-svn: 217802
During the IslAst parallelism check also compute the minimal dependency
distance and store it in the IstAst for node.
Reviewer: sebpop
Differential Revision: http://reviews.llvm.org/D4987
llvm-svn: 217729
Even though we previously correctly detected the multi-dimensional access
pattern for accesses with a certain base address, we only delinearized
non-affine accesses to this address. Affine accesses have not been touched and
remained as single dimensional accesses. The result was an inconsistent
description of accesses to the same array, with some being one dimensional and
some being multi-dimensional.
This patch ensures that all accesses are delinearized with the same
dimensionality as soon as a single one of them has been detected as non-affine.
While writing this patch, it became evident that the options
-polly-allow-nonaffine and -polly-detect-keep-going have not been properly
supported in case delinearization has been turned on. This patch adds relevant
test coverage and addresses these issues as well. We also added some more
documentation to the functions that are modified in this patch.
This fixes llvm.org/PR20123
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217728
At the moment we assume that only elements of identical size are stored/loaded
to a certain base pointer. This patch adds logic to the scop detection to verify
this.
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217727
We now verify that such functions are correctly detected even in combination
with delinearization. This change is added to ensure we have good test coverage
for the subsequent delinearization fix.
We also remove unnecessary instructions from the test case.
llvm-svn: 217664
This allows us to omit the GuardBB in front of created loops
if we can show the loop trip count is at least one. It also
simplifies the dominance relation inside the new created region.
A GuardBB (even with a constant branch condition) might trigger
false dominance errors during function verification.
Differential Revision: http://reviews.llvm.org/D5297
llvm-svn: 217525
Summary:
+ Refactor the runtime check (RTC) build function
+ Added helper function to create an PollyIRBuilder
+ Change the simplify region function to create not
only unique entry and exit edges but also enfore that
the entry edge is unconditional
+ Cleaned the IslCodeGeneration runOnScop function:
- less post-creation changes of the created IR
+ Adjusted and added test cases
Reviewers: grosser, sebpop, simbuerg, dpeixott
Subscribers: llvm-commits, #polly
Differential Revision: http://reviews.llvm.org/D5076
llvm-svn: 217508
The -e flag exits the script with a non-zero code if any subcommand
fails. This flag allows us to notice as early as possible if the
test was not properly regenerated using a command like:
$ create_ll.sh t.c && opt < t.ll -polly ...
The above pattern is useful when iteratively developing a test case
to guard against un-noticed syntax errors.
Differential Revision: http://reviews.llvm.org/D5276
llvm-svn: 217463
There was a bug in the IslAst which caused that no more outermost
parallel loops were detected/checked after a parallel outermost loop
of depth 1.
+ Test case attached
llvm-svn: 217452
In Polly we used to have a mix of test cases, some that used 'opt %s' and others
that used 'opt < %s'. We now change all to use 'opt < %s'. Piping in test files
is preferable as it does prevent temporary files to be written to disk. This
brings us in line with what is usus in LLVM.
llvm-svn: 216816
This replaces the use of %defaultOpts = '-basicaa -polly-prepare' with the
minimal set of passes necessary for a test to succeed. Of the test cases that
previously used %defaultOpts 76 test cases require none of these passes, 42
need -basicaa and only 2 need -polly-prepare. Our change makes this requirement
explicit.
In Polly many test cases have been using a macro '%defaultOpts' which run a
couple of preparing passes before the actual Polly test case. This macro was
introduced very early in the development of Polly and originally contained a
large set of canonicalization passes. However, as the need for additional
canonicalization passes makes test cases harder to understand and also more
fragile in terms of changes in such passes, we aim since a longer time to only
include the minimal set of passes necessary. This patch removes the last
leftovers from of %defaultOpts and brings our tests cases more in line to what
is usus in LLVM itself.
llvm-svn: 216815
Arcanist (arc) will now always run linters before uploading any new
commit to Phabricator. All errors/warnings (or their absence) will be
shown in the web interface together with a explanation by the commiter
(arcanist will ask the commiter if the build was not clean).
The linters include:
- clang-format
- spelling check
- permissions check (aka. chmod)
- filename check
- merge conflict marker check
Note, that their scope is sometimes limited (see .arclint for
details).
This commit also fixes all errors and warnings these linters reported,
namely:
- spelling mistakes and typos
- executable permissions for various text files
Differential Revision: http://reviews.llvm.org/D4916
llvm-svn: 215871
This will spill out information about LLVM-internals. However, in cases
where the name of the Value matches the name of the array in the source,
we provide more useful information. In cases where we spill internals,
the information still might help the user to pin down the correct
arrays.
The problem we face here is: The error is pinned to the debug location
of one of the offending values out of the alias set instead of all of them.
The more information we give the user about the set of aliasing
pointers the better.
llvm-svn: 215830
This reverts commit 215466 (and 215528, a trivial formatting fix).
The intention of these commits is a good one, but unfortunately they broke
our LNT buildbot:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-codegen-isl
Several of the cleanup changes that have been combined in this 'fixup' are
trivial and could probably be committed as obvious changes without risking to
break the build. The remaining changes are little and it should be easy to
figure out what went wrong.
llvm-svn: 215817
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
There is no needed for neither 1-dimensional nor higher dimensional arrays to
require positive offsets in the outermost array dimension.
We originally introduced this assumption with the support for delinearizing
multi-dimensional arrays.
llvm-svn: 214665
+ Remove the class IslGenerator which duplicates the functionality of
IslExprBuilder.
+ Use the IslExprBuilder to create code for memory access relations.
+ Also handle array types during access creation.
+ Enable scev codegen for one of the transformed memory access tests,
thus access creation without canonical induction variables available.
+ Update one test case to the new output.
llvm-svn: 214659
The updated tests use a different context than the old ones did.
Other than that only their path and the code generation we use
changed.
llvm-svn: 214657
Use the fact that if we visit a for node first in pre and next in post order
we know we did not visit any children, thus we found an innermost loop.
+ Test case for an innermost loop with a conditional inside
llvm-svn: 213870
+ Introduced dependency type TYPE_TC_RED to represent the transitive closure
(& the reverse) of reduction dependences. These are used when we check for
reduction parallel loops.
+ Test cases including loop reversals and modulo schedules which compute
reductions in a alternated order.
llvm-svn: 213019
We move back to a simple approach where the liveout is the last must-write
statement for a data-location plus all may-write statements. The previous
approach did not work out. We would have to consider per-data-access
dependences, instead of per-statement dependences to correct it. As this adds
complexity and it seems we would not gain anything over the simpler approach
that we implement in this commit, I moved us back to the old approach of
computing the liveout, but enhanced it to also add may-write accesses.
We also fix the test case and explain why we can not perform dead code
elimination in this case.
llvm-svn: 212925
As our delinearization works optimistically, we need in some cases run-time
checks that verify our optimistic assumptions. A simple example is the
following code:
void foo(long n, long m, long o, double A[n][m][o]) {
for (long i = 0; i < 100; i++)
for (long j = 0; j < 150; j++)
for (long k = 0; k < 200; k++)
A[i][j][k] = 1.0;
}
After clang linearized the access to A and we delinearized it again to
A[i][j][k] we need to ensure that we do not access the delinearized array
out of bounds (this information is not available in LLVM-IR). Hence, we
need to verify the following constraints at run-time:
CHECK: Assumed Context:
CHECK: [o, m] -> { : m >= 150 and o >= 200 }
llvm-svn: 212198
This change is particularly useful in the code generation as we need
to know which binary operator/identity element we need to combine/initialize
the privatization locations.
+ Print the reduction type for each memory access
+ Adjusted the test cases to comply with the new output format and
to test for the right reduction type
llvm-svn: 212126
Iterate over all store memory accesses and check for valid binary reduction
candidate loads by following the operands of the stored value. For each
candidate pair we check if they have the same base address and there are no
other accesses which may overlap with them. This ensures that no intermediate
value can escape into other memory locations or is overwritten at some point.
+ 17 test cases for reduction detection and reduction dependency modeling
llvm-svn: 211957
Enabling -keep-going in ScopDetection causes expansion to an invalid
Scop candidate.
Region A <- Valid candidate
|
Region B <- Invalid candidate
If -keep-going is enabled, ScopDetection would expand A to A+B because
the RejectLog is never checked for errors during expansion.
With this patch only A becomes a valid Scop.
llvm-svn: 211875
This change will ease the transision to multiple reductions per statement as
we can now distinguish the effects of multiple reductions in the same
statement.
+ Wrapped reduction dependences are used to compute privatization dependences
+ Modified test cases to account for the change
llvm-svn: 211795
This dependency analysis will keep track of memory accesses if they might be
part of a reduction. If not, the dependences are tracked on a statement level.
The main reason to do this is to reduce the compile time while beeing able to
distinguish the effects of reduction and non-reduction accesses.
+ Adjusted two test cases
llvm-svn: 211794
Add support for generating optimization remarks after completing the
detection of Scops.
The goal is to provide end-users with useful hints about opportunities that
help to increase the size of the detected Scops in their code.
By default the remark is unspecified and the debug location is empty. Future
patches have to expand on the messages generated.
This patch brings a simple test case for ReportFuncCall to demonstrate the
feature.
Reports all missed opportunities to increase the size/number of valid
Scops:
clang <...> -Rpass-missed="polly-detect" <...>
opt <...> -pass-remarks-missed="polly-detect" <...>
Reports beginning and end of all valid Scops:
clang <...> -Rpass="polly-detect" <...>
opt <...> -pass-remarks="polly-detect" <...>
Differential Revision: http://reviews.llvm.org/D4171
llvm-svn: 211769
Due to bad habit we sometimes used a variable %defaultOpts that listed
a set of passes commonly run to prepare for Polly. None of these test cases
actually needs special preparation and only two of them need the 'basicaa' to
be scheduled. Scheduling the required alias analysis explicitly makes the test
cases clearer.
llvm-svn: 211671
We had a set of test cases that have been incomplete and XFAILED. This patch
completes a couple of the interesting ones and removes the ones which seem
redundant or not sufficiently reduced to be useful.
llvm-svn: 211670
Insert a header into the new testcase containing a sample RUN line a FIXME and
an XFAIL. Then insert the formated C code and finally the LLVM-IR without
attributes, the module ID or the target triple.
llvm-svn: 211612
We use llvm.codegen intrinsic to generate code for embedded LLVM-IR
strings. The reason we introduce such a intrinsic is that previous
clang/opt tools was NOT linked with various LLVM targets and their
AsmParsers and AsmPrinters. Since clang/opt been linked with all the
needed libraries, we no longer need the llvm.codegen intrinsic.
llvm-svn: 211573
+ Collect reduction dependences
+ Introduced TYPE_RED in Dependences.h which can be used to obtain the
reduction dependences
+ Used TYPE_RED to prevent parallelization while we do not have a privatizing
code generation
+ Relax the dependences for non-parallel code generation
+ Add privatization dependences to ensure correctness
+ 12 Test cases to check for reduction and privatization dependences
llvm-svn: 211369
We do this currently only for test cases where we have integer offsets that
clearly access array dimensions out-of-bound.
-; for (long i = 0; i < n; i++)
-; for (long j = 0; j < m; j++)
-; for (long k = 0; k < o; k++)
+; for (long i = 0; i < n - 3; i++)
+; for (long j = 4; j < m; j++)
+; for (long k = 0; k < o - 7; k++)
; A[i+3][j-4][k+7] = 1.0;
This will be helpful if we later want to simplify the access functions under the
assumption that they do not access memory out of bounds.
llvm-svn: 210179
Without this patch, the testcase would fail on the delinearization of the second
array:
; void foo(long n, long m, long o, double A[n][m][o]) {
; for (long i = 0; i < n; i++)
; for (long j = 0; j < m; j++)
; for (long k = 0; k < o; k++) {
; A[i+3][j-4][k+7] = 1.0;
; A[i][0][k] = 2.0;
; }
; }
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[3 + i0, -4 + i1, 7 + i2] };
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
Here is the output of FileCheck on the testcase without this patch:
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
^
<stdin>:26:2: note: possible intended match here
[n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[o0] };
^
It is possible to find a good delinearization for A[i][0][k] only in the context
of the delinearization of both array accesses.
There are two ways to delinearize together all array subscripts touching the
same base address: either duplicate the code from scop detection to first gather
all array references and then run the delinearization; or as implemented in this
patch, use the same delinearization info that we computed during scop detection.
llvm-svn: 210117
+ CL-option --polly-tile-sizes=<int,...,int>
The i'th value is used as a tile size for dimension i, if
there is no i'th value, the value of --polly-default-tile-size is
used
+ CL-option --polly-default-tile-size=int
Used if no tile size is given for a dimension i
+ 3 Simple testcases
llvm-svn: 209753
Tag the GPGPU codegen test cases as unsupported if the nvptx target is not
included in the current llvm build.
Contributed-by: Yabin Hu <yabin.hwu@gmail.com>
llvm-svn: 208779
Commit r206510 falsely advertised to fix the load cases, even though it only
fixed the store case. This commit adds the same fix for the load case including
the missing test coverage.
llvm-svn: 206577
Even tough we may want to generate a vector load, the address from which to load
still is a scalar. Make sure even if previous address computations may have been
vectorized, that the addresses are also available as scalars.
This fixes http://llvm.org/PR19469
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206510
The following example shows a non-parallel loop
void f(int a[]) {
int i;
for (i = 0; i < 10; ++i)
A[i] = A[i+5];
}
which, in case we import a schedule that limits the iteration domain
to 0 <= i < 5, becomes parallel. Previously we crashed in such cases, now we
just recognize it as parallel.
This fixes http://llvm.org/PR19435
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206318
During code preperation trivial PHI nodes (mainly introduced by lcssa) are
deleted to decrease the number of introduced allocas (==> dependences). However
simply replacing them by their only incoming value would cause the independent
block pass to introduce new allocas. To prevent this we try to share stack slots
during code preperarion, hence to reuse a already created alloca 'to demote' the
trivial PHI node. This works if we know that the value stored in this alloca
will be the incoming value of the trivial PHI at the end of the predecessor
block of this trivial PHI.
Contributed-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 205320
We explicitly specifying all filenames instead of assuming some naming
convention used by clang and opt.
Contributed-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 204726
For complex examples it may happen that we do not compute dependences. In this
case we do not want to crash, but just not detect parallel loops.
llvm-svn: 204470
This patch enables vectorization of loops containing backward array
traversal (array stride is -1).
Contributed-by: Chris Jenneisch <chrisj@codeaurora.org>
llvm-svn: 204257
In case we are at the innermost band, we try to prepare for vectorization. This
means, we look for the innermost parallel loop and strip mine this loop to the
innermost level using a strip-mine factor corresponding to the number of vector
iterations.
For whatever reason, the code that implemented this feature was broken. We now
added a comment, a test case and obviously also the right code.
llvm-svn: 203544
This is necessary to avoid test failures in the CLooG test suite due to the
recent isl update.
We also need to update two polly test cases which rely on a certain order in the
textual description that isl chooses for its sets and maps. Changes here are not
often, but we should probably switch to a check that verifies such maps are
semantically equivalent instead of represented identically.
llvm-svn: 203476
For now we only mark innermost loops for the loop vectorizer. We could later
also mark not-innermost loops to enable the introduction of openmp parallelism.
llvm-svn: 202854
In 'obsequi' we have a scop in which the current dead code elimination works,
but the generated code is way too complex. To avoid this trouble (and to not
disable the DCE entirely) we add an additional approximative step before
the actual dead code elimination. This should fix one of the two current
nightly-test issues.
Polly could be improved to handle 'obsequi' by teaching it to introduce only a
single parameter for (%1 and zext %1) which halves the number of parameters and
allows polly to derive a simpler representation for the set of live iterations.
However, this needs some time to investigate.
I will commit a test case as soon as we have a reduced one.
llvm-svn: 202010
In case we do not have valid dependences, we do not run dead code elimination or
the schedule optimizer. This fixes an infinite loop in the dead code
elimination (PR12110).
llvm-svn: 201982
Instead of giving a choice between a precise (but possibly very complex)
analysis and an approximative analysis we now use a hybrid approach which uses N
precise steps followed by one approximating step. The precision of the analysis
can be changed by increasing N. With a default of 'N' = 2, we get fully precise
results for our current test cases and should not run into performance problems
for more complex test cases. We can adjust this value when we got more
experience with this dead code elimination.
llvm-svn: 201888
We now skip the debug intrinsics which is a lot better than crashing due to
uncopied metadata references. We should step by step investigate which debug
intrinsics we can copy without trouble.
We still keep the debug location metadata.
llvm-svn: 201860
This pass eliminates loop iterations that compute results that are not used
later on. This can help e.g. in D, where the default zero-initialization is
often unnecessary if right after new values are assigned to an array.
Contributed-by: Peter Conn <conn.peter@gmail.com>
llvm-svn: 201817
We do not have a use for this information at the moment. If we need this at some
point, the "instruction -> access" mapping needs to be enhanced as a single
instruction could then possibly perform multiple accesses.
This patch allows us to build the polyhedral information for scops with scalar
dependences.
llvm-svn: 201815
In rare cases the modification of one scop can effect the validity of other
scops, as code generation of an earlier scop may make the scalar evolution
functions derived for later scops less precise. The example that triggered this
patch was a scop that contained an 'or' expression as follows:
%add13710 = or i32 %j.19, 1
--> {(1 + (4 * %l)),+,2}<nsw><%for.body81>
Scev could only analyze the 'or' as it knew %j.19 is a multiple of 2. This
information was not available after the first scop was code generated (or
independent-blocks was run on it) and SCEV could not derive a precise SCEV
expression any more. This means we could not any more code generate this SCoP.
My current understanding is that there is always the risk that an earlier code
generation change invalidates later scops. As the example we have seen here is
difficult to avoid, we use this occasion to guard us against all such
invalidations.
This patch "solves" this issue by verifying right before we start working on
a detected scop, if this scop is in fact still valid. This adds a certain
overhead. However the verification we run is anyways very fast and secondly
it is only run on detected scops. So the overhead should not be very large. As
a later optimization we could detect scops only on demand, such that we need
to run scop-detections always only a single time.
This should fix the single last failure in the LLVM test-suite for the new
scev-based code generation.
llvm-svn: 201593
There does not seem to be a reason that we can not support PHI nodes outside of
the scop that reference values within the SCoP. Or at least, the attached test
case seems to do the right thing. We remove the assert for now.
llvm-svn: 200427
In rare cases, a region R which is itself not valid has an indirect child region
that is valid. When R becomes part of a valid region by expansion of another
region, then all children of R have to be erased from the set of valid regions.
This patch ensures that indirect children are erased in addition to direct
children.
Contributed-by: Armin Groesslinger <armin.groesslinger@uni-passau.de>
Tobias: I added a reduced test case and adjusted the logic of the patch to
only recurse until the first child is found.
llvm-svn: 200411
Array base addresses need to be invariant in the region considered. The base
address has to be computed outside the region, or, when it is computed inside,
the value must not change with the iterations of the loops. For example, when a
two-dimensional array is represented as a pointer to pointers the base address
A[i] in an access A[i][j] changes with i; therefore, such regions have to be
rejected.
Contributed by: Armin Größlinger <armin.groesslinger@uni-passau.de>
llvm-svn: 200314
David Peixotto