The combineEhSections runs, by design, before processSectionCommands so
that input exception sections like .ARM.exidx and .eh_frame are not assigned
to OutputSections. Unfortunately if /DISCARD/ removes InputSections that
have associated .ARM.exidx sections without discarding the .ARM.exidx
synthetic section then we will end up crashing when trying to sort the
InputSections in ascending address order.
We fix this by filtering out the sections that have been discarded prior
to processing the InputSections in finalizeContents().
fixes pr42890
Differential Revision: https://reviews.llvm.org/D65759
llvm-svn: 368041
This is a case missed by D64136. If %t1.o has a weak reference on foo,
and %t2.so has a non-weak reference on foo:
```
0. ld.lld %t1.o %t2.so # ok; STB_WEAK; accepted since D64136
1. ld.lld %t2.so %t1.o # undefined symbol: foo; STB_GLOBAL
2. gold %t1.o %t2.so # ok; STB_WEAK
3. gold %t2.so %t1.o # undefined reference to 'foo'; STB_GLOBAL
4. ld.bfd %t1.o %t2.so # undefined reference to `foo'; STB_WEAK
5. ld.bfd %t2.so %t1.o # undefined reference to `foo'; STB_WEAK
```
It can be argued that in both cases, the binding of the undefined foo
should be set to STB_WEAK, because the binding should not be affected by
referenced from shared objects.
--allow-shlib-undefined doesn't suppress errors (3,4,5), but -shared or
--noinhibit-exec allows ld.bfd/gold to produce a binary:
```
3. gold -shared %t2.so %t1.o # ok; STB_GLOBAL
4. ld.bfd -shared %t2.so %t1.o # ok; STB_WEAK
5. ld.bfd -shared %t1.o %t1.o # ok; STB_WEAK
```
If %t2.so has DT_NEEDED entries, ld.bfd will load them (lld/gold don't
have the behavior). If one of the DSO defines foo and it is in the
link-time search path (e.g. DT_NEEDED entry is an absolute path, via
-rpath=, via -rpath-link=, etc),
`ld.bfd %t1.o %t2.so` and `ld.bfd %t1.o %t2.so` will not error.
In this patch, we make Undefined and SharedSymbol share the same binding
computing logic. Case 1 will be allowed:
```
0. ld.lld %t1.o %t2.so # ok; STB_WEAK; accepted since D64136
1. ld.lld %t2.so %t1.o # ok; STB_WEAK; changed by this patch
```
In the future, we can explore the option that turns both (0,1) into
errors if --no-allow-shlib-undefined (default when linking an
executable) is in action.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65584
llvm-svn: 368038
Some tls-*.s tests do not test generic TLS behavior but rather are x86 specific.
Rename them to i386-*.s or x86-64-*.s
Delete tls-static.s: covered by tls-opt.s
Delete tls-opt-no-plt.s: add --implicit-check-not=.plt to x86-64-tls-gdie.s to cover it
Rename tls-dynamic-i686.s to i386-tls-dynamic.s
Rename tls-i686.s to i386-tls-le.s
Rename tls-opt-i686.s to i386-tls-opt.s
Rename tls-opt-iele-i686-nopic.s to i386-tls-opt-iele-nopic.s
Rename tls-dynamic.s to x86-64-tls-dynamic.s . IE should be split off in the future.
Rename tls-error.s to x86-64-reloc-tpoff32-error.s
Rename tls-opt-gdie.s to x86-64-tls-gdie.s
Rename tls-opt-x86_64-noplt.s to x86-64-tls-opt-noplt.s
Rename tls-opt-local.s => x86-64-tls-ie-opt-local.s . It can be merged with x86-64-tls-ie-local.s in the future.
llvm-svn: 367877
We prioritize non-* wildcards overs VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
This patch generalizes the rule to "*" of other versions and thus fixes PR40176.
I don't feel strongly about this GNU linkers' behavior but the
generalization simplifies code.
Delete `config->defaultSymbolVersion` which was used to special case
VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
In `SymbolTable::scanVersionScript`, custom versions are handled the same
way as VER_NDX_LOCAL/VER_NDX_GLOBAL. So merge
`config->versionScript{Locals,Globals}` into `config->versionDefinitions`.
Overall this seems to simplify the code.
In `SymbolTable::assign{Exact,Wildcard}Versions`,
`sym->verdefIndex == config->defaultSymbolVersion` is changed to
`verdefIndex == UINT32_C(-1)`.
This allows us to give duplicate assignment diagnostics for
`{ global: foo; };` `V1 { global: foo; };`
In test/linkerscript/version-script.s:
vs_index of an undefined symbol changes from 0 to 1. This doesn't matter (arguably 1 is better because the binding is STB_GLOBAL) because vs_index of an undefined symbol is ignored.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65716
llvm-svn: 367869
With GNU tools, delayload is handled completely differently. (One
creates a specific delayload import library using dlltool and then
links against it instead of the normal import library.)
Instead of requiring using -Xlink=-delayload:lib.dll, we can provide
an lld specific option for this.
Differential Revision: https://reviews.llvm.org/D65728
llvm-svn: 367837
These symbols actually point to the symbol's IAT entry, which
obviously is different from the symbol itself (which is imported
from a different module and doesn't exist in the current one).
Omitting this symbol helps gdb inspect automatically imported
symbols, see https://sourceware.org/bugzilla/show_bug.cgi?id=24574
for discussion on the matter.
Surprisingly, those extra symbols don't seem to be an issue for
gdb when the sources have been built with clang, only with gcc.
The actual logic in gdb that this depends on still is unknown, but
omitting these symbols from the symbol table is the right thing to
do in any case.
Differential Revision: https://reviews.llvm.org/D65727
llvm-svn: 367836
Delete version-script-missing.s: it is covered by version-script-noundef.s
Delete version-script-anonymous-local.s: it is covered by version-script-{glob,weak}.s etc
Delete version-script-no-warn{,2}.s: add --fatal-warnings to some version-script.s commands instead
llvm-svn: 367778
An R_*_IRELATIVE represents the address of a STT_GNU_IFUNC symbol
(redirected at runtime) which is non-preemptable and is not associated
with a canonical PLT (associated with a symbol with a section index of
SHN_UNDEF but a non-zero st_value).
.rel[a].plt [DT_JMPREL, DT_JMPREL+DT_JMPRELSZ) contains relocations that
can be lazily resolved. R_*_IRELATIVE are always eagerly resolved, so
conceptually they do not belong to .rela.plt. "iplt" is mostly a misnomer.
glibc powerpc and powerpc64 do not resolve R_*_IRELATIVE if they are in .rela.plt.
// a.o - synthesized PLT call stub has an R_*_IRELATIVE
void ifunc(); int main() { ifunc(); }
// b.o
static void real() {}
asm (".type ifunc, %gnu_indirect_function");
void *ifunc() { return ℜ }
The lld-linked executable crashes. ld.bfd places R_*_IRELATIVE in
.rela.dyn and the executable works.
glibc i386, x86_64, and aarch64 have logic
(glibc/sysdeps/*/dl-machine.h:elf_machine_lazy_rel) to eagerly resolve
R_*_IRELATIVE in .rel[a].plt so the lld-linked executable works.
Move R_*_IRELATIVE from .rel[a].plt to .rel[a].dyn to fix the crashes on
glibc powerpc/powerpc64. This also helps simplifying ifunc
implementation in FreeBSD rtld-elf powerpc64.
If --pack-dyn-relocs=android[+relr] is specified, the Android packed
dynamic relocation format is used for .rela.dyn. We cannot name
in.relaIplt ".rela.dyn" because the output section will have mixed
formats. This can be improved in the future.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D65651
llvm-svn: 367745
This avoids a spurious and confusing log message in cases where
both e.g. "alias" and "__imp_alias" exist.
Differential Revision: https://reviews.llvm.org/D65598
llvm-svn: 367673
1. raw_ostream supports ANSI colors so that you can write messages to
the termina with colors. Previously, in order to change and reset
color, you had to call `changeColor` and `resetColor` functions,
respectively.
So, if you print out "error: " in red, for example, you had to do
something like this:
OS.changeColor(raw_ostream::RED);
OS << "error: ";
OS.resetColor();
With this patch, you can write the same code as follows:
OS << raw_ostream::RED << "error: " << raw_ostream::RESET;
2. Add a boolean flag to raw_ostream so that you can disable colored
output. If you disable colors, changeColor, operator<<(Color),
resetColor and other color-related functions have no effect.
Most LLVM tools automatically prints out messages using colors, and
you can disable it by passing a flag such as `--disable-colors`.
This new flag makes it easy to write code that works that way.
Differential Revision: https://reviews.llvm.org/D65564
llvm-svn: 367649
The Archive object created when loading an archive specified with
wholearchive got cleaned up immediately, when the owning std::unique_ptr
went out of scope, even if persisted StringRefs pointed to memory that
belonged to the archive, which no longer was mapped in memory.
This hasn't been an issue with regular (as opposed to thin) archives,
as references to the member objects has kept the mapping for the whole
archive file alive - but with thin archives, all such references point
to other files.
Add the std::unique_ptr to the arena allocator, to retain it as long
as necessary.
This fixes (the last issue raised in) PR42388.
Differential Revision: https://reviews.llvm.org/D65565
llvm-svn: 367599
This patch
1) adds -z separate-code and -z noseparate-code (default).
2) changes the condition that the last page of last PF_X PT_LOAD is
padded with trap instructions.
Current condition (after D33630): if there is no `SECTIONS` commands.
After this change: if -z separate-code is specified.
-z separate-code was introduced to ld.bfd in 2018, to place the text
segment in its own pages. There is no overlap in pages between an
executable segment and a non-executable segment:
1) RX cannot load initial contents from R or RW(or non-SHF_ALLOC).
2) R and RW(or non-SHF_ALLOC) cannot load initial contents from RX.
lld's current status:
- Between R and RX: in `Writer<ELFT>::fixSectionAlignments()`, the start of a
segment is always aligned to maxPageSize, so the initial contents loaded by R
and RX do not overlap. I plan to allow overlaps in D64906 if -z noseparate-code
is in effect.
- Between RX and RW(or non-SHF_ALLOC if RW doesn't exist):
we currently unconditionally pad the last page to commonPageSize
(defaults to 4096 on all targets we support).
This patch will make it effective only if -z separate-code is specified.
-z separate-code is a dubious feature that intends to reduce the number
of ROP gadgets (which is actually ineffective because attackers can find
plenty of gadgets in the text segment, no need to find gadgets in
non-code regions).
With the overlapping PT_LOAD technique D64906, -z noseparate-code
removes two more alignments at segment boundaries than -z separate-code.
This saves at most defaultCommonPageSize*2 bytes, which are significant
on targets with large defaultCommonPageSize (AArch64/MIPS/PPC: 65536).
Issues/feedback on alignment at segment boundaries to help understand
the implication:
* binutils PR24490 (the situation on ld.bfd is worse because they have
two R-- on both sides of R-E so more alignments.)
* In binutils, the 2018-02-27 commit "ld: Add --enable-separate-code" made -z separate-code the default on Linux.
d969dea983
In musl-cross-make, binutils is configured with --disable-separate-code
to address size regressions caused by -z separate-code. (lld actually has the same
issue, which I plan to fix in a future patch. The ld.bfd x86 status is
worse because they default to max-page-size=0x200000).
* https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=237676 people want
smaller code size. This patch will remove one alignment boundary.
* Stef O'Rear: I'm opposed to any kind of page alignment at the
text/rodata line (having a partial page of text aliased as rodata and
vice versa has no demonstrable harm, and I actually care about small
systems).
So, make -z noseparate-code the default.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64903
llvm-svn: 367537
We extract and print the source location in the message header so that
Visual Studio is able to parse it and jump there. As duplicate symbols
are defined in several locations, it is more convenient to have separate
error messages, which allows a user to easily access all the locations.
Differential Revision: https://reviews.llvm.org/D65213
llvm-svn: 367536
* Add --no-show-raw-insn to llvm-objdump -d tests
* When linking an executable with %t.so, the path %t.so will be recorded
in the DT_NEEDED entry if %t.so doesn't have DT_SONAME. .dynstr will
have varying lengths on different systems. Add -soname so that the
string in .dynstr is of fixed length to make tests more robust.
* Rename i386-tls-initial-exec-local.s to i386-tls-ie-local.s
* Refactor tls-initial-exec-local.s to x86-64-tls-ie-local.s
llvm-svn: 367533
Previously, when `--vs-diagnostics` was used, the linker printed
something like
hidden(undef.s): error: undefined hidden symbol: foo
>>> referenced by undef.s:15
Differential Revision: https://reviews.llvm.org/D65499
llvm-svn: 367515
Summary:
This allows reporting undefined symbols before LTO codegen is
run. Since LTO codegen can take a long time, this improves user
experience by avoiding that time spend if the link is going to
fail with undefined symbols anyway.
Fixes PR32400.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: mehdi_amini, steven_wu, dexonsmith, mstorsjo, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62434
llvm-svn: 367136
* Add --no-show-raw-insn to llvm-objdump -d tests
* When linking an executable with %t.so, the path %t.so will be recorded
in the DT_NEEDED entry if %t.so doesn't have DT_SONAME. .dynstr will
have varying lengths on different systems. Add -soname to make tests
more robust.
llvm-svn: 366988
Summary:
We want the tool conventions to state that `__tls_align` will be a power of 2.
It makes sense to not have an exception for when there is no TLS.
Reviewers: tlively, sunfish
Reviewed By: tlively
Subscribers: dschuff, sbc100, jgravelle-google, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65177
llvm-svn: 366948
Summary:
This could previously happen if errors that are emitted after reaching the
error limit. In that case, the flag inside the newline() function will be
set to true which causes the next call to print a newline even though the
actual message will be discarded.
Reviewers: ruiu, grimar, MaskRay, espindola
Reviewed By: ruiu
Subscribers: emaste, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65198
llvm-svn: 366944
That allows to remove duplicated code which subtracts 0x7000 from the
R_MIPS_TLS_TPREL_XXX relocations values in the `MIPS::relocateOne`
function.
llvm-svn: 366888
This ports r366573 from COFF to ELF.
There are now to toString(Archive::Symbol), one doing MSVC demangling
in COFF and one doing Itanium demangling in ELF, so rename these two
to toCOFFString() and to toELFString() to not get a duplicate symbol.
Nothing ever passes a raw Archive::Symbol to CHECK(), so these not
being part of the normal toString() machinery seems ok.
There are two code paths in the ELF linker that emits this type of
diagnostic:
1. The "normal" one in InputFiles.cpp. This is covered by the tweaked test.
2. An additional one that's only used for libcalls if there's at least
one bitcode in the link, and if the libcall symbol is lazy, and
lazily loaded from an archive (i.e. not from a lazy .o file).
(This code path was added in r339301.) Since all libcall names so far
are C symbols and never mangled, the change there is not observable
and hence not covered by tests.
Differential Revision: https://reviews.llvm.org/D65095
llvm-svn: 366836
Code built for mingw with -fdata-sections will store each TLS variable
in a comdat section, named .tls$$<varname>. Normal TLS variables are
stored in sections named .tls$ with a trailing dollar, which are
sorted after a starter marker (in a later linked object file) in a
section named ".tls" (with no dollar suffix), before an ending marker
in a section named ".tls$ZZZ".
The mingw comdat section suffix stripping introduced in SVN r363457
broke sorting of such tls sections, ending up sorting the stripped
.tls$$<varname> sections (stripped to ".tls") before the start marker
in the section named ".tls".
We could add exceptions to the section name suffix stripping for
.tls (and .CRT, where suffixes always should be honored), but the
more conservative option is probably the reverse; to only apply the
stripping for the normal sections where sorting shouldn't have any
effect.
Differential Revision: https://reviews.llvm.org/D65018
llvm-svn: 366780
lld currently selects the relocation model automatically depending on
the link flags specified, but in some cases it'd be useful to allow
explicitly overriding the relocation model using a flag.
llvm-svn: 366644
Summary:
Add immutable WASM global `__tls_align` which stores the alignment
requirements of the TLS segment.
Add `__builtin_wasm_tls_align()` intrinsic to get this alignment in Clang.
The expected usage has now changed to:
__wasm_init_tls(memalign(__builtin_wasm_tls_align(),
__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, sbc100, sunfish, alexcrichton
Reviewed By: tlively
Subscribers: dschuff, jgravelle-google, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65028
llvm-svn: 366624
Also add test coverage for thin archives (which are the only way I could
come up with to test at least some of the diagnostic changes).
Differential Revision: https://reviews.llvm.org/D64927
llvm-svn: 366573
* Delete aarch64-tls-static.s: it is covered by aarch64-tlsdesc.c
* Add --no-show-raw-insn to llvm-objdump -d tests
* When linking an executable with %t.so, the path %t.so will be recorded in the DT_NEEDED entry if %t.so doesn't have DT_SONAME. The DT_NEEDED has varying lengths on different systems.
Add -soname to make tests more robust. This issue will become outstanding if we allow overlapping PT_LOAD (D64930).
llvm-svn: 366532
Summary:
This change makes it so that passing --shared-memory is all a user
needs to do to get proper multithreaded code. This default can still
be explicitly overridden for any reason using --passive-segments and
--active-segments.
Reviewers: sbc100, quantum
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64950
llvm-svn: 366504
Avoid splitting the test into multiple files and use zero for the value of
the symbol with addends at relocations so that it's clear what value is
being used at relocations.
Differential Revision: https://reviews.llvm.org/D64684
llvm-svn: 366463
It's possible to create IR that uses !associated to refer to a global that
appears later in the module, which can result in these types of forward
references being generated. Unfortunately our assembler does not currently
accept the resulting .s so I needed to use yaml2obj to test this.
Differential Revision: https://reviews.llvm.org/D64880
llvm-svn: 366460
Until recently, Python_ADDITIONAL_VERSIONS was used to limit LLVM's
Python support to 2.7. Now that both LLVM and LLDB both support Python
3, there's no longer a need to put an arbitrary limit on this.
However, instead of removing the variable, r365692 expanded the list,
which has the (presumably unintentional) side-effect of expression
preference for Python 3.
Instead, as Michal proposed in the original code review, we should just
not set the list at all, and let CMake pick whatever Python interpreter
you have in your path.
This patch removes the Python_ADDITIONAL_VERSIONS variable in llvm,
clang and lld. I've also updated the docs with the default behavior and
how to force a different Python version to be used.
Differential revision: https://reviews.llvm.org/D64894
llvm-svn: 366447
When code relaxation is enabled many RISC-V fixups are not resolved but
instead relocations are emitted. This happens even for DWARF debug
sections. Therefore, to properly support the parsing of DWARF debug info
we need to be able to resolve RISC-V relocations. This patch adds:
* Support for RISC-V relocations in RelocationResolver
* DWARF support for two relocations per object file offset
* DWARF changes to support relocations in more DIE fields
The two relocations per offset change is needed because some RISC-V
relocations (used for label differences) come in pairs.
Relocations can also be emitted for DWARF fields where relocations were
not yet evaluated. Adding relocation support for some of these fields is
essencial. On the other hand, LLVM currently emits RISC-V relocations
for fixups that could be safely evaluated, since they can never be
affected by code relaxations. This patch also adds relocation support
for the fields affected by those extraneous relocations (the DWARF unit
entry Length, and the DWARF debug line entry TotalLength and
PrologueLength), for testing purposes.
Differential Revision: https://reviews.llvm.org/D62062
Patch by Luís Marques.
llvm-svn: 366402
basic64be.s is a big-endian powerpc64 test that just duplicates what
basic-ppc64.s does. Extend basic-ppc64.s to add big-endian tests.
Delete basic64be.s
Rename basic32.s to basic-i386.s
llvm-svn: 366401
When hidden symbols are discarded by comdat rules we still want to
create a local defined symbol, otherwise `Symbol::isDiscarded()` relies
on begin able to check `getChunk->discarded`.
This is a followup on rL362769. The comdat.ll test was previously GC'ing
the `__wasm_call_ctors` functions so `do_init` was not actually being
included in the link. Once that function was included in triggered the
crash bug that this change addresses.
Fixes: https://github.com/emscripten-core/emscripten/issues/8981
Differential Revision: https://reviews.llvm.org/D64872
llvm-svn: 366358
Summary:
Add a --vs-diagnostics flag that alters the format of diagnostic output
to enable source hyperlinks in Visual Studio.
Differential Revision: https://reviews.llvm.org/D58484
Reviewed by: ruiu
llvm-svn: 366333
Summary:
After D58892 split the RW PT_LOAD on the PT_GNU_RELRO boundary, the new
layout is:
PT_LOAD(PT_GNU_RELRO(.data.rel.ro .bss.rel.ro)) PT_LOAD(.data. .bss)
The two pageAlign() calls at PT_GNU_RELRO boundaries are redundant due
to the existence of PT_LOAD.
Reviewers: grimar, peter.smith, ruiu, espindola
Reviewed By: ruiu
Subscribers: sfertile, atanasyan, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64854
llvm-svn: 366307
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
Summary:
Fixes PR41828. Before this, LLD always emitted SafeSEH chunks and
defined __safe_se_handler_table & size. Now, /safeseh:no leaves those
undefined.
Additionally, we were checking for the safeseh @feat.00 flag in two
places: once to emit errors, and once during safeseh table construction.
The error was set up to be off by default, but safeseh is supposed to be
on by default. I combined the two checks, so now LLD emits an error if
an input object lacks @feat.00 and safeseh is enabled. This caused the
majority of 32-bit LLD tests to fail, since many test input object files
lack @feat.00 symbols. I explicitly added -safeseh:no to those tests to
preserve behavior.
Finally, LLD no longer sets IMAGE_DLL_CHARACTERISTICS_NO_SEH if any
input file wasn't compiled for safeseh.
Reviewers: mstorsjo, ruiu, thakis
Reviewed By: ruiu, thakis
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63570
llvm-svn: 366238
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
This reverts r365990 (git commit 1a6053ebc6)
The test no longer depends on the Visual C++ libraries. I confirmed that
the crash still reproduces with the new test case if I remove the null
check.
llvm-svn: 366095
This removes a call to `object::getSymbol<ELFT>`.
We used this function in a next way: it was given an
array of symbols and index and returned either a symbol
at the index given or a error.
This function was removed in D64631.
(rL366052, but was reverted because of LLD compilation error
that I didn't know about).
It does not make much sense to keep this function on LLVM side
only for LLD, because having only a list of symbols and the index it
is not able to produce a valueable error message about context anyways.
llvm-svn: 366057
Summary:
This was causing large addresses to be emitted as negative numbers,
which rightfully caused crashes in binaryen.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64612
llvm-svn: 365930
Before rL295040 the linker just crashed when a GOT relocation (R_MIPS_GOT16)
comes from a merge section. To ensure that this bug still fixed it's enough
to check that the linker does not crash and create GOT entries.
llvm-svn: 365834
E.g. for x86_64, previously each symbol's thunk was 87 bytes. Now
there's a 12 byte thunk per symbol, plus a shared 83 byte tail
function.
This is similar to what both MS link.exe and GNU tools do for
delay imports.
Differential Revision: https://reviews.llvm.org/D64288
llvm-svn: 365823
Summary:
Adds the following two options to lld-link:
-thinlto-prefix-replace: allows replacing a prefix in paths generated
for ThinLTO. This can be used to ensure index files and native object
files are stored in unique directories, allowing multiple distributed
ThinLTO links to proceed concurrently.
-thinlto-object-suffix-replace: allows replacing a suffix in object
file paths involved in ThinLTO. This allows minimized index files to
be used for the thin link while storing the paths to the full bitcode
files for subsequent steps (code generation and final linking).
Reviewers: ruiu, tejohnson, pcc, rnk
Subscribers: mehdi_amini, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64542
llvm-svn: 365807
Summary:
This implements -thinlto-index-only, -thinlto-index-only:,
and -thinlto-emit-imports-files options in lld-link. They are
analogous to their counterparts in ld.lld: -thinlto-index-only
causes us to perform ThinLTO's thin link and write index files,
but not perform code generation. -thinlto-index-only: does the
same, but also writes a text file listing the native object
files expected to be generated. -thinlto-emit-imports-files
creates a text file next to each index file, listing the files
to import from.
Reviewers: ruiu, tejohnson, pcc, rnk
Subscribers: mehdi_amini, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64461
llvm-svn: 365800
This fixes PR38549, which is silently accepted by ld.bfd.
This seems correct because it makes sense to let non-glob patterns take
precedence over glob patterns.
lld issues an error because
`assignWildcardVersion(ver, VER_NDX_LOCAL);` is processed before `assignExactVersion(ver, v.id, v.name);`.
Move all assignWildcardVersion() calls after assignExactVersion() calls
to fix this.
Also, move handleDynamicList() to the bottom. computeBinding() called by
includeInDynsym() has this cryptic rule:
if (versionId == VER_NDX_LOCAL && isDefined() && !isPreemptible)
return STB_LOCAL;
Before the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* handleDynamicList() is called
- foo.computeBinding() is STB_LOCAL
- foo.includeInDynsym() is false
- foo.isPreemptible is not set (wrong)
* foo's version is set to V1
After the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* foo's version is set to V1
* handleDynamicList() is called
- foo.computeBinding() is STB_GLOBAL
- foo.includeInDynsym() is true
- foo.isPreemptible is set (correct)
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64550
llvm-svn: 365760
In lvm2, libdevmapper.so is linked with a version script with duplicate
version assignments:
DM_1_02_138 { global: ... dm_bitset_parse_list; ... };
DM_1_02_129 { global: ... dm_bitset_parse_list; ... };
ld.bfd silently accepts this while gold issues a warning. We currently
error, thus inhibit producing the executable. Change the error to
warning to allow this case, and improve the message.
There are some cases where ld.bfd error
`anonymous version tag cannot be combined with other version tags`
but we just warn. It is probably OK for now.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D64549
llvm-svn: 365759
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
D64130 introduced a bug described in the following message:
https://reviews.llvm.org/D64130#1571560
The problem can happen with the following script:
SECTIONS {
.out : {
...
FILL(0x10101010)
*(.aaa)
...
}
The current code tries to read (0x10101010) as an expression and
does not break when meets *, what results in a script parsing error.
In this patch, I verify that FILL command's expression always wrapped in ().
And at the same time =<fillexp> expression can be both wrapped or unwrapped.
I checked it matches to bfd/gold.
Differential revision: https://reviews.llvm.org/D64476
llvm-svn: 365635
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
This puts handling of undefined symbols in a single location. Its
also more in line with the ELF backend which only reports undefined
symbols based on relocations.
One side effect is that we no longer report undefined symbols that are
only referenced in GC'd sections.
This also fixes a crash reported in the emscripten toolchain:
https://github.com/emscripten-core/emscripten/issues/8930.
Differential Revision: https://reviews.llvm.org/D64280
llvm-svn: 365553
This should always have been ".data". Without this we treat the
section as a user-defined section in other places (such as the
generation of __start/__stop symbols).
Differential Revision: https://reviews.llvm.org/D64439
llvm-svn: 365547
This test was added by D64200/r365139 to check we don't merge
SHF_MERGE|SHF_STRINGS sections with different alignments (that wastes
space and can make MergeTailAlignment::Builder out of sync).
It has nothing to do with tail merge (-O2), so rename it.
llvm-svn: 365442
GCC emits warning on this line:
error: enumeral and non-enumeral type in conditional
expression [-Werror=extra]
Change-Id: I04969cc32e27e310968b88ebaa4e1c4894528d74
llvm-svn: 365434
With this, `clang-cl /source-charset:utf-16 test.cc` now prints `invalid
value 'utf-16' in '/source-charset:utf-16'` instead of `invalid value
'utf-16' in '-finput-charset=utf-16'` before, and several other clang-cl
flags produce much less confusing output as well.
Fixes PR29106.
Since an arg and its alias can have different arg types (joined vs not)
and different values (because of AliasArgs<>), I chose to give the Alias
its own Arg object. For convenience, I just store the alias directly in
the unaliased arg – there aren't many arg objects at runtime, so that
seems ok.
Finally, I changed Arg::getAsString() to use the alias's representation
if it's present – that function was already documented as being the
suitable function for diagnostics, and most callers already used it for
diagnostics.
Implementation-wise, Arg::accept() previously used to parse things as
the unaliased option. The core of that switch is now extracted into a
new function acceptInternal() which parses as the _aliased_ option, and
the previously-intermingled unaliasing is now done as an explicit step
afterwards.
(This also changes one place in lld that didn't use getAsString() for
diagnostics, so that that one place now also prints the flag as the user
wrote it, not as it looks after it went through unaliasing.)
Differential Revision: https://reviews.llvm.org/D64253
llvm-svn: 365413
We should be generating one __start/__stop pair per output segment
not per input segment. The test wasn't catching this because it was
only linking a single object file.
Fixes PR41565
Differential Revision: https://reviews.llvm.org/D64148
llvm-svn: 365308
On Windows, the bitfield layout rule places `ussigned Referenced : 1` at
byte offset 40, instead of byte offset 37 on *NIX. The consequence is that
sizeof(SymbolUnion) == 104 on Windows while 96 on *NIX.
To eliminate this difference, change these unsigned bitfields to bool.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64238
llvm-svn: 365296
Since OPT_UNKNOWN args never have any values and consist only of
spelling (and are never aliased), this doesn't make any difference in
practice, but it's more consistent with Arg's guidance to use
getAsString() for diagnostics, and it matches what clang does.
Also tweak two tests to use an unknown option that contains '=' for
additional coverage while here. (The new tests pass fine with the old
code too though.)
llvm-svn: 365200
This fixes an 8-year-old regression. r105763 made it so that aliases
always refer to the unaliased option – but it missed the "joined" branch
of JoinedOrSeparate flags. (r162231 then made the Args classes
non-virtual, and r169344 moved them from clang to llvm.)
Back then, there was no JoinedOrSeparate flag that was an alias, so it
wasn't observable. Now /U in CLCompatOptions is a JoinedOrSeparate alias
in clang, and warn_slash_u_filename incorrectly used the aliased arg id
(using the unaliased one isn't really a regression since that warning
checks if the undefined macro contains slash or backslash and only then
emits the warning – and no valid use will pass "-Ufoo/bar" or similar).
Also, lld has many JoinedOrSeparate aliases, and due to this bug it had
to explicitly call `getUnaliasedOption()` in a bunch of places, even
though that shouldn't be necessary by design. After this fix in Option,
these calls really don't have an effect any more, so remove them.
No intended behavior change.
(I accidentally fixed this bug while working on PR29106 but then
wondered why the warn_slash_u_filename broke. When I figured it out, I
thought it would make sense to land this in a separate commit.)
Differential Revision: https://reviews.llvm.org/D64156
llvm-svn: 365186
- The code tried to pass false to split()'s KeepEmpty parameter, but
instead passed it to MaxSplit. As a result, it would never split on
commas. This has been broken since the flag was added in r278056.
- The code used getSpelling() for getting the argument's values, but
getSpelling() always returns the `/debugtype:` prefix without any
values. So if any /debugtype: flag was passed, it always resulted in
an "unknown option:" warning. (The warning code then used the correct
getValue() for printing the invalid option, so the warning looked
kind of like it made sense.) This regressed in r342894.
Slightly improve the test coverage of this feature (but since I don't
know what this flag actually does, there's still no test for the correct
semantics), and add a comment to getSpelling() explaining what it does.
llvm-svn: 365182
On 64-bit systems, this decreases sizeof(SymbolUnion) from 112 to 96.
Add a static_assert to avoid accidental increases in future.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D64208
llvm-svn: 365169
The difference from D63432/r365015 is that this patch does not place
SHF_STRINGS sections with different alignments into the same
MergeSyntheticSection. Doing that would:
(1) create unnecessary padding and thus waste space.
Add a test tail-merge-string-align2.s to check no extra padding is created.
(2) make some input sections unaligned when tail merge (-O2) is enabled.
The alignment of MergeTailAlignment::Builder was out of sync in D63432.
MOVAPS on such unaligned strings can raise SIGSEGV.
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). Merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
Merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D64200
llvm-svn: 365139
If %t1.o has a weak reference on foo, and %t2.so has a non-weak
reference on foo: `ld.lld %t1.o %t2.so -o %t`
We incorrectly set the binding of the undefined foo to STB_GLOBAL.
Fix this by ignoring undefined symbols in a SharedFile for Undefined and
SharedSymbol.
This fixes the binding of pthread_once when the program links against
both librt.so and libpthread.so
```
a.o: STB_WEAK reference to pthread_once
librt.so: STB_GLOBAL reference to pthread_once # should be ignored
libstdc++.so: STB_WEAK reference to pthread_once # should be ignored
libgcc_s.so.1: STB_WEAK reference to pthread_once # should be ignored
```
The STB_GLOBAL pthread_once issue (not fixed by D63974) can cause a link error when the result
DSO is used to link another DSO with -z defs if -lpthread is not specified. (libstdc++.so.6 not having a dependency on libpthread.so is a really nasty hack...)
We happened to create a weak undef before D63974 because libgcc_s.so.1
was linked the last and it changed the binding again to weak.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64136
llvm-svn: 365129
Summary:
Adds `--passive-segments` and `--active-segments` flags to control
what kind of segments are emitted. For now the default is always
to emit active segments so this is not a breaking change, but in
the future the default will be changed to passive segments when
shared memory is requested and active segments otherwise. When
passive segments are emitted, corresponding memory.init and
data.drop instructions are emitted in a `__wasm_init_memory`
function that is automatically called at the beginning of
`__wasm_call_ctors`.
Reviewers: sbc100, aheejin, dschuff
Subscribers: azakai, dschuff, jgravelle-google, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59343
llvm-svn: 365088
The referenced symbol is expected to point to an R_RISCV_*_HI20
relocation. An absolute symbol has no associated section, therefore
there cannot be a matching R_RISCV_*_HI20.
This fixes the crash reported by PR42038. For reference, ld.bfd errors:
(.init+0x4): dangerous relocation: %pcrel_lo missing matching %pcrel_hi
Differential Revision: https://reviews.llvm.org/D63273
llvm-svn: 365049
This reverts r365015.
David Zarzycki reported this change broke stage2 and stage3 tests. The
root cause is still not very clear, but I guess some SHF_MERGE sections
with the same name have different alignments. They were not merged
before but were merged after r365015.
Something that assumes address uniqueness of such mergeable data caused
the bug.
llvm-svn: 365048
gcc may generate .debug_info/.debug_aranges/.debug_line/etc that are
relocated by R_RISCV_ADD*/R_RISCV_SUB* pairs.
Allow R_RISCV_ADD in non-SHF_ALLOC section to fix link errors like:
ld.lld: error: print.c:(.debug_frame+0x60): has non-ABS relocation R_RISCV_ADD64 against symbol '.L0 '
Differential Revision: https://reviews.llvm.org/D63259
llvm-svn: 365035
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). String merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
String merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63432
llvm-svn: 365015
Some variables in lld have the same name as functions ignoring case.
This patch gives them different names, so that my next patch is easier
to read.
llvm-svn: 365003
This matches the wasm lld and GNU ld behavior.
The ELF linker has special handling for bitcode archives but if that
doesn't kick in we probably want to error out rather than silently
ignore the library.
Differential Revision: https://reviews.llvm.org/D63781
llvm-svn: 364998
Add Triple::riscv64 and Triple::riscv32 to getBitcodeMachineKind for get right
e_machine during LTO.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D52165
llvm-svn: 364996
Fixes PR42442
t.o has a STB_GLOBAL undef ref to f
t2.so has a STB_WEAK undef ref to f
t1.so defines f
ld.lld t.o t1.so t2.so currently sets the binding of `f` to STB_WEAK.
This is not correct because there exists a STB_GLOBAL undef ref from a
regular object. The problem is that resolveUndefined() doesn't check
if the undef ref is seen for the first time:
if (isShared() || isLazy() || (isUndefined() && Other.Binding != STB_WEAK))
Binding = Other.Binding;
The isShared() condition should be `isShared() && !Referenced`
where Referenced is set to true after an undef ref is seen.
In practice, when linking a pthread program with glibc:
// a.o
#include <pthread.h>
pthread_mutex_t mu = PTHREAD_MUTEX_INITIALIZER;
int main() { pthread_mutex_unlock(&mu); }
{clang,gcc} -fuse-ld=lld a.o -lpthread # libpthread.so is linked before libgcc_s.so.1
The weak undef pthread_mutex_unlock in libgcc_s.so.1 makes the result
weak, which diverges from GNU linkers where STB_DEFAULT is used:
23: 0000000000000000 0 FUNC WEAK DEFAULT UND pthread_mutex_lock
(Note, if -pthread is used instead, libpthread.so will be linked **after**
libgcc_s.so.1 . lld sets the binding to the expected STB_GLOBAL)
Similar linking sequences (ld.lld t.o t1.so t2.so) appear to be used by
Go, which cause a build error https://github.com/golang/go/issues/31912.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D63974
llvm-svn: 364913
RISC-V psABI doesn't specify TLS relaxation. It can be handled the same
way as we handle ARM TLS. RISC-V TLS is even simpler because GD/LD use
the same relocation type.
Reviewed By: jrtc27, ruiu
Differential Revision: https://reviews.llvm.org/D63220
llvm-svn: 364813
* Handle initial relocation types: R_RISCV_CALL_PLT and R_RISCV_GOT_HI20.
* Produce dynamic relocation types: R_RISCV_COPY, R_RISCV_RELATIVE, R_RISCV_JUMP_SLOT.
* Define SymbolRel as R_RISCV_{32,64}
* Generate PLT header: it is used by lazy binding PLT in glibc.
* R_RISCV_CALL is changed from R_PC to R_PC_PLT. If the target symbol is preemptable, this will suppress an unnecessary "canonical PLT".
This behavior is different from ld.bfd but it is agreed the current lld behavior is favored.
I have received positive responses from the binutils maintainer that the ABI/binutils implementation can be improved, see:
https://github.com/riscv/riscv-elf-psabi-doc/issues/98https://sourceware.org/bugzilla/show_bug.cgi?id=24685
Many -no-pie/-pie/-shared programs linked against musl or glibc should work with this patch.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D63076
llvm-svn: 364812
GNU windres, and MS cvtres (unless the /readonly option is passed)
produce read-write .rsrc sections, when creating resource object files.
This caused the sections to not be added to the precreated RsrcSec,
and therefore not be added to the data directory.
Differential Revision: https://reviews.llvm.org/D63837
llvm-svn: 364660
If .rela.plt is mentioned in a linker script, it might be preserved
even if it is empty. In that case, LLD created DT_JMPREL and DT_PLTGOT
dynamic tags. When the tags exist, a dynamic loader writes values into
reserved slots in .got.plt to support lazy symbol resolution.
The problem is that, in fact, the linker has not reserved that space,
and the writing may occur into the memory allocated for something else.
Differential Revision: https://reviews.llvm.org/D63869
llvm-svn: 364639
Summary:
This is needed for address sanitizer on Emscripten. As everything in
memory starts at the value passed to --global-base, everything before
that can be used as shadow memory.
This symbol is added so that the library for the ASan runtime can know
where the shadow memory ends and real memory begins.
This is split from D63742.
Reviewers: tlively, aheejin, sbc100
Subscribers: sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63833
llvm-svn: 364467
This restores r361830 "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded"
and dependent commits (r362218, r362497) which were reverted by r364321, with a fix of a --gdb-index issue.
.rela.debug_ranges contains relocations of range list entries:
// start address of a range list entry
// old: 0; after r361830: 0
00000000000033a0 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + 0
// end address of a range list entry
// old: 0xe; after r361830: 0
00000000000033a8 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + e
If both start and end addresses of a range list entry resolve to 0,
DWARFDebugRangeList::isEndOfListEntry() will return true, then the
.debug_range decoding loop will terminate prematurely:
while (true) {
decode StartAddress
decode EndAddress
if (Entry.isEndOfListEntry()) // prematurely
break;
Entries.push_back(Entry);
}
In lld/ELF/SyntheticSections.cpp, readAddressAreas() will read
incomplete address ranges and the resulting .gdb_index will be
incomplete. For files that gdb hasn't loaded their debug info, gdb uses
.gdb_index to map addresses to CUs. The absent entries make gdb fail to
symbolize some addresses.
To address this issue, we simply allow relocations to undefined symbols
in DWARF.cpp:findAux() and let RelocationResolver resolve them.
This patch should fix:
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364391
There was another place where handling for this relocation was missing
that was accidentally omitted from rLLD364367, causing the newly added
test to fail on the buildbots.
llvm-svn: 364371
Summary:
Before:
```
wasm-ld: error: Relocations not in offset order
```
After
```
wasm-ld: error: While processing `libjulia.so`: Relocations not in offset order
```
At least this way you get to find out which input file is malformed.
Reviewers: sbc100
Differential Revision: https://reviews.llvm.org/D63694
llvm-svn: 364368
Summary:
The list of relocations with addend in lld was missing `R_WASM_MEMORY_ADDR_REL_SLEB`,
causing `wasm-ld` to generate corrupted output. This fixes that problem and while
we're at it pulls the list of such relocations into the Wasm.h header, to avoid
duplicating it in multiple places.
Reviewers: sbc100
Differential Revision: https://reviews.llvm.org/D63696
llvm-svn: 364367
This is fairly common with wasm since GNU ar (most likely the system ar)
doesn't support the wasm object format so user who don't override AR
will end up with archives without an index. We don't want to silently
ignore this issue.
In the future we could choose to instead behave like the ELF backend and
read the symbols from each object file in the archive if they are all of
the same type. However, error'ing out seem like a conservative approach
for now.
Fixes: PR42376
Differential Revision: https://reviews.llvm.org/D63739
llvm-svn: 364338
(In effect, reverting "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded".)
It caused debug info problems in LibreOffice [1] and Chromium/V8 [2].
Reverting until those can be fixed.
It also reverts r362497 "STT_SECTION symbol should be defined" on .eh_frame, .debug*, .zdebug* and .gcc_except_table"
which was landed as a follow-up to the above.
> With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
> on relocations to discarded section symbol. This was added as an error
> in rLLD319404, but was not so effective before D61583 (it turned the
> error to a warning).
>
> Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
> discarded .text are very common and somewhat expected. Don't warn/error
> on them. As a reference, ld.bfd has a similar logic in
> _bfd_elf_default_action_discarded() to allow these cases.
>
> Delete invalid-undef-section-symbol.test because what it intended to
> check is now covered by the updated comdat-discarded-reloc.s
>
> Delete relocatable-eh-frame.s because we allow relocations from
> .eh_frame as a special case now.
And finally it reverts r362218 "[ELF] Replace a dead test in getSymVA() with assert()"
as that also depended on the main change reverted here.
> Symbols relative to discarded comdat sections are Undefined instead of
> Defined now (after D59649 and D61583). The `== &InputSection::Discarded`
> test becomes dead. I cannot find a test related to this behavior.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364321
lld/coff already deduplicated undefined symbols on a TU level: It would
group all references to a symbol from a single TU. This makes it so that
references from all TUs to a single symbol are grouped together.
Since lld/coff almost did what I thought it did already, the patch is
much smaller than the elf version. The only not local change is that
getSymbolLocations() now returns a vector<string> instead of a string,
so that the undefined symbol reporting code can know how many references
to a symbol exist in a given TU.
Fixes PR42260 for lld/coff.
Differential Revision: https://reviews.llvm.org/D63646
llvm-svn: 364285
r360841 introduced CommonSymbol class. An unintended behavioral change
introduced by that change was that common symbols are not internalized
by LTO under some condition. This patch fixes that issue.
The issue occurred under the following condition:
1. There exists a common symbol
2. At least one DSO is given to lld or -pie is used
If the above conditions are met, Symbol::includeInDynsym() returned a
wrong value for a common symbol.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41978
Differential Revision: https://reviews.llvm.org/D63752
llvm-svn: 364273
Similar to R_AARCH64_ABS32, R_PPC64_ADDR32 can represent either a signed
value or unsigned value, thus we should use `[-2**(n-1), 2**n)` instead of
`[-2**(n-1), 2**(n-1))` to check overflows.
The issue manifests as a bogus linker error when linking the powerpc64le Linux kernel.
The new behavior is compatible with ld.bfd's complain_overflow_bitfield.
The upper bound of the error message is not correct. Fix it as well.
The changes to R_PPC_ADDR16, R_PPC64_ADDR16, R_X86_64_8 and R_X86_64_16 are similar.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63690
llvm-svn: 364164
Summary:
Our rule to create R_*_RELATIVE for absolute relocation types were
loose. D63121 made it stricter but it failed to create R_*_RELATIVE for
R_ARM_TARGET1 and R_PPC64_TOC. rLLD363236 worked around that by
reinstating the original behavior for ARM and PPC64.
This patch is an attempt to simplify the logic.
Note, in ld.bfd, R_ARM_TARGET2 --target2=abs also creates
R_ARM_RELATIVE. This seems a very uncommon scenario (moreover,
--target2=got-rel is the default), so I do not implement any logic
related to it.
Also, delete R_AARCH64_ABS32 from AArch64::getDynRel. We don't have
working ILP32 support yet. Allowing it would create an incorrect
R_AARCH64_RELATIVE.
For MIPS, the (if SymbolRel, then RelativeRel) code is to keep its
behavior unchanged.
Note, in ppc64-abs64-dyn.s, R_PPC64_TOC gets an incorrect addend because
computeAddend() doesn't compute the correct address. We seem to have the
wrong behavior for a long time. The important thing seems that a dynamic
relocation R_PPC64_TOC should not be created as the dynamic loader will
error R_PPC64_TOC is not supported.
Reviewers: atanasyan, grimar, peter.smith, ruiu, sfertile, espindola
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63383
llvm-svn: 363928
ARM and RISC-V do not support TLS relaxations. However, for General
Dynamic and Local Dynamic models, if we are producing an executable and
the symbol is non-preemptable, we know it must be defined and the
R_ARM_TLS_DTPMOD32/R_RISCV_TLS_DTPMOD{32,64} dynamic relocation can be
omitted because it is always 1. This may be necessary for static linking
as DTPMOD may not be expected at load time.
Merge handleARMTlsRelocation() into handleTlsRelocation(). This requires
more logic to R_TLSGD_PC and R_TLSLD_PC. Because we use SymbolicRel to
resolve the relocation at link time, R_ARM_TLS_DTPMOD32 can be deleted
from relocateOne(). It cannot be used as a static relocation type.
As a bonus, the additional logic in R_TLSGD_PC code can be shared by the
TLS support for RISC-V (D63220).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63333
llvm-svn: 363927
Some versions of the Visual C++ 2015 runtime have line tables with the
subsection kind of 0x800000F2. In cvinfo.h, 0x80000000 is documented to
be DEBUG_S_IGNORE. This appears to implement the intended behavior.
llvm-svn: 363724
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
This matches how it is done for .xdata and .pdata already.
On i386, the symbol name in the section name suffix does not contain
the extra underscore prefix.
This is one part of a fix for PR42217.
Differential Revision: https://reviews.llvm.org/D63350
llvm-svn: 363456
In processRelocAux(), our handling of 1) link-time constant and 2) weak
undef is the same, so put them together to simplify the logic.
This moves the weak undef code around. The result is that: in a writable
section (or -z notext), we will no longer emit dynamic relocations for
weak undefined symbols.
The new behavior seems to match GNU linkers, and improves consistency
with the case of a readonly section.
The condition `!Config->Shared` was there probably because it is common
for a -shared link not to specify full dependencies. Keep it now but we
may revisit the decision in the future.
gABI says:
> The behavior of weak symbols in areas not specified by this document is
> implementation defined. Weak symbols are intended primarily for use in
> system software. Applications using weak symbols are unreliable since
> changes in the runtime environment might cause the execution to fail.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63003
llvm-svn: 363399
This patch adds new command line option `--undefined-glob` to lld.
That option is a variant of `--undefined` but accepts wildcard
patterns so that all symbols that match with a given pattern are
handled as if they were given by `-u`.
`-u foo` is to force resolve symbol foo if foo is not a defined symbol
and there's a static archive that contains a definition of symbol foo.
Now, you can specify a wildcard pattern as an argument for `--undefined-glob`.
So, if you want to include all JNI symbols (which start with "Java_"), you
can do that by passing `--undefined-glob "Java_*"` to the linker, for example.
In this patch, I use the same glob pattern matcher as the version script
processor is using, so it does not only support `*` but also `?` and `[...]`.
Differential Revision: https://reviews.llvm.org/D63244
llvm-svn: 363396
If .sdata is absent, linker synthesized __global_pointer$ gets a section index of SHN_ABS.
(ld.bfd has a similar issue: binutils PR24678)
Scrt1.o may use `lla gp, __global_pointer$` to reference the symbol PC
relatively. In -pie/-shared mode, lld complains if a PC relative
relocation references an absolute symbol (SHN_ABS) but ld.bfd doesn't:
ld.lld: error: relocation R_RISCV_PCREL_HI20 cannot refer to lute symbol: __global_pointer$
Let the reference of __global_pointer$ to force creation of .sdata to
fix the problem. This is similar to _GLOBAL_OFFSET_TABLE_, which forces
creation of .got or .got.plt .
Also, change the visibility from STV_HIDDEN to STV_DEFAULT and don't
define the symbol for -shared. This matches ld.bfd, though I don't
understand why it uses STV_DEFAULT.
Reviewed By: ruiu, jrtc27
Differential Revision: https://reviews.llvm.org/D63132
llvm-svn: 363351
PDBs may not necessarily contain an IPI stream. Handle this case
gracefully.
The test case was verified to work with MS link.exe.
Patch by Vladimir Panteleev, with a small simplification
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D63178
llvm-svn: 363213
An unrecognized signature (magic) at the beginning of a debug section
should not be a fatal error; it only means that the debug information
is in a format that is not supported by LLD. This can be due to it
being in CodeView versions 3 or earlier. These can occur in old import
libraries from legacy SDKs.
The test case was verified to work with MS link.exe.
Patch by Vladimir Panteleev!
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D63177
llvm-svn: 363212
r363016 let lld-link and llvm-lib share the /machine: parsing code.
This lets llvm-cvtres share it as well.
Making llvm-cvtres depend on llvm-lib seemed a bit strange (it doesn't
need llvm-lib's dependencies on BinaryFormat and BitReader) and I
couldn't find a good place to put this code. Since it's just a few
lines, put it in lib/Object for now.
Differential Revision: https://reviews.llvm.org/D63120
llvm-svn: 363144
R_RISCV_{ADD,SET,SUB}* are used for local label computation.
Add a new RelExpr member R_RISCV_ADD to represent them.
R_RISCV_ADD is treated as a link-time constant because otherwise
R_RISCV_{ADD,SET,SUB}* are not allowed in -pie/-shared mode.
In glibc Scrt1.o, .rela.eh_frame contains such relocations.
Because .eh_frame is not writable, we get this error:
ld.lld: error: can't create dynamic relocation R_RISCV_ADD32 against symbol: .L0 in readonly segment; recompil object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in ..../riscv64-linux-gnu/lib/Scrt1.o
With D63076 and this patch, I can run -pie/-shared programs linked against glibc.
Note llvm-mc cannot currently produce R_RISCV_SET* so they are not tested.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63183
llvm-svn: 363128
Summary:
clang (as of 2019-06-12) / gcc (as of 8.2.1) PPC64 may emit a .rela.toc
which references an embedded switch table in a discarded .rodata/.text
section. The .toc and the .rela.toc are incorrectly not placed in the
comdat.
Technically a relocation from outside the group is not allowed by the ELF spec:
> A symbol table entry with STB_LOCAL binding that is defined relative
> to one of a group's sections, and that is contained in a symbol table
> section that is not part of the group, must be discarded if the group
> members are discarded. References to this symbol table entry from
> outside the group are not allowed.
Don't report errors to work around the bug.
This should fix the ppc64le-lld-multistage-test bot while linking llvm-tblgen:
ld.lld: error: relocation refers to a discarded section: .rodata._ZNK4llvm3MVT13getSizeInBitsEv
>>> defined in utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o
>>> referenced by CodeGenRegisters.cpp
>>> utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o:(.toc+0x0)
Some other PPC specific sections may have similar problems. We can blacklist more
section names when problems occur.
// A simple program that reproduces the bug.
// Note .rela.toc (outside the group) references a section symbol (STB_LOCAL) in a group.
void puts(const char *);
struct A {
void foo(int a) {
switch (a) {
case 0: puts("0"); break;
case 1: puts("1"); puts("1"); break;
case 2: puts("2"); break;
case 3: puts("3"); puts("4"); break;
case 4: puts("4"); break;
case 5: puts("5"); puts("5"); break;
case 6: puts("6"); break;
}
}
int a;
};
void foo(A x) { x.foo(x.a); }
Reviewers: ruiu, sfertile, espindola
Reviewed By: ruiu
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63182
llvm-svn: 363126
This reverts commit r363060 and restores r362867.
r362867 is innocent. The ppc64le-lld-multistage-test bot failure was due to a clang/gcc .toc bug:
ld.lld: error: relocation refers to a discarded section: .rodata._ZNK4llvm3MVT13getSizeInBitsEv
>>> defined in utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o
>>> referenced by CodeGenRegisters.cpp
>>> utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o:(.toc+0x0)
It will be worked around by D63182.
llvm-svn: 363124
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
Users are exepcted to pass all .res files to the linker, which then
merges all the resource in all .res files into a tree structure and then
converts the final tree structure to a .obj file with .rsrc$01 and
.rsrc$02 sections and then links that.
If the user instead passes several .obj files containing such resources,
the correct thing to do would be to have custom code to merge the trees
in the resource sections instead of doing normal section merging -- but
link.exe rejects if multiple resource obj files are passed in with
LNK4078, so let lld-link do that too instead of silently writing broken
.rsrc sections in that case.
The only real way to run into this is if users manually convert .res
files to .obj files by running cvtres and then handing the resulting
.obj files to lld-link instead, which in practice likely never happens.
(lld-link is slightly stricter than link.exe now: If link.exe is passed
one .obj file created by cvtres, and a .res file, for some reason it
just emits a warning instead of an error and outputs strange looking
data. lld-link now errors out on mixed input like this.)
One way users could accidentally run into this is the following
scenario: If a .res file is passed to lib.exe, then lib.exe calls
cvtres.exe on the .res file before putting it in the output .lib.
(llvm-lib currently doesn't do this.)
link.exe's /wholearchive seems to only add obj files referenced from the
static library index, but lld-link current really adds all files in the
archive. So if lld-link /wholearchive is used with .lib files produced
by lib.exe and .res files were among the files handed to lib.exe, we
previously silently produced invalid output, but now we error out.
link.exe's /wholearchive semantics on the other hand mean that it
wouldn't load the resource object files from the .lib file at all.
Since this scenario is probably still an unlikely corner case,
the difference in behavior here seems fine -- and lld-link might have to
change to use link.exe's /wholearchive semantics in the future anyways.
Vaguely related to PR42180.
Differential Revision: https://reviews.llvm.org/D63109
llvm-svn: 363078
So that R_RISCV_PCREL_LO12_[IS] are considered as link-time constants in
-pie mode, otherwise there are bogus errors:
ld.lld: error: can't create dynamic relocation R_RISCV_PCREL_LO12_I against symbol: .L0 in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63123
llvm-svn: 363064
The current rule is loose: `!Sym.IsPreemptible || Expr == R_GOT`.
When the symbol is non-preemptable, this allows absolute relocation
types with smaller numbers of bits, e.g. R_X86_64_{8,16,32}. They are
disallowed by ld.bfd and gold, e.g.
ld.bfd: a.o: relocation R_X86_64_8 against `.text' can not be used when making a shared object; recompile with -fPIC
This patch:
a) Add TargetInfo::SymbolicRel to represent relocation types that resolve to a
symbol value (e.g. R_AARCH_ABS64, R_386_32, R_X86_64_64).
As a side benefit, we currently (ab)use GotRel (R_*_GLOB_DAT) to resolve
GOT slots that are link-time constants. Since we now use Target->SymbolRel
to do the job, we can remove R_*_GLOB_DAT from relocateOne() for all targets.
R_*_GLOB_DAT cannot be used as static relocation types.
b) Change the condition to `!Sym.IsPreemptible && Type != Target->SymbolicRel || Expr == R_GOT`.
Some tests are caught by the improved error checking (ld.bfd/gold also
issue errors on them). Many misuse .long where .quad should be used
instead.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63121
llvm-svn: 363059
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
Otherwise the getPartition() accessor may return an OOB pointer. Found
using _GLIBCXX_DEBUG.
The error is benign (we never dereference the pointer for the end marker)
so this wasn't caught by e.g. the sanitizer bots.
llvm-svn: 363026
And share some code with lld-link.
While here, also add a FIXME about PR42180 and merge r360150 to llvm-lib.
Differential Revision: https://reviews.llvm.org/D63021
llvm-svn: 363016
The previous name "%lib" doesn't trigger any actual replacement. It
creates the file "./tools/lld/test/ELF/%lib.o" in the test directory.
llvm-svn: 362988
Patch by Erik McClure with a modification to rebase to HEAD.
When calling `COFF::link()` with `CanExitEarly` set to `false`, the
function needs to clean up several global variable caches to ensure that
the next invocation of the function starts from a clean slate. The
`MergeChunk::Instances` cache is missing from this cleanup code, and as
a result will create nondeterministic memory access errors and sometimes
infinite loops due to invalid memory being referenced on the next call
to `COFF::link()`.
This fix simply clears `MergeChunk::Instances` before exiting the function.
An additional review of the COFF library was made to try and find any
other missing global caches, but I was unable to find any other than
`MergeChunk`. Someone more familiar with the global variables might want
to do their own check.
This fix was made to support inNative
<https://github.com/innative-sdk/innative>'s `.wast` script compiler,
which must build multiple incremental builds. It relies on statically
linking LLD because the entire compiler must be a single statically
embeddable library, thus preventing it from being able to call LLD as a
new process.
Differential Revision: https://reviews.llvm.org/D63042
llvm-svn: 362930
Fix buildbot failure on native AArch64 buildbot that does not have X86
backend compiled in.
Differential Revision: https://reviews.llvm.org/D63071
llvm-svn: 362926
This is implemented by the lld-link option -include:, just like
--require-defined. Contrary to --require-defined, the -u/--undefined
option allows the symbol to remain undefined in the end.
This should fix PR42121.
Differential Revision: https://reviews.llvm.org/D62876
llvm-svn: 362882
This works like /include, but is not fatal if the requested symbol
wasn't found. This allows implementing the GNU ld option -u.
Differential Revision: https://reviews.llvm.org/D62976
llvm-svn: 362881
I've change the variable names used in PPC64.cpp from "Instr" to "Insn"
because "Insn" is a more common abbreviation for "instruction".
While changing PPC64.cpp relocateOne(), make R_PPC64_ADDR16_LO{_DS}
slightly more efficient by saving a read and a write for the TocOptimize
case.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63043
llvm-svn: 362867
Summary:
When handling exports from the command line or from .def files, the
linker does a "fuzzy" string lookup to allow finding mangled symbols.
However, when the symbol is re-exported under a new name, the linker has
to transfer the decorations from the exported symbol over to the new
name. This is implemented by taking the mangled symbol that was found in
the object and replacing the original symbol name with the export name.
Before this patch, LLD implemented the fuzzy search by adding an
undefined symbol with the unmangled name, and then during symbol
resolution, checking if similar mangled symbols had been added after the
last round of symbol resolution. If so, LLD makes the original symbol a
weak alias of the mangled symbol. Later, to get the original symbol
name, LLD would look through the weak alias and forward it on to the
import library writer, which copies the symbol decorations. This
approach doesn't work when bar is itself a weak alias, as is the case in
asan. It's especially bad when the aliasee of bar contains the string
"bar", consider "bar_default". In this case, we would end up exporting
the symbol "foo_default" when we should've exported just "foo".
To fix this, don't look through weak aliases to find the mangled name.
Save the mangled name earlier during fuzzy symbol lookup.
Fixes PR42074
Reviewers: mstorsjo, ruiu
Subscribers: thakis, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62984
llvm-svn: 362849
We create several types of synthetic sections for loadable partitions, including:
- The dynamic symbol table. This allows code outside of the loadable partitions
to find entry points with dlsym.
- Creating a dynamic symbol table also requires the creation of several other
synthetic sections for the partition, such as the dynamic table and hash table
sections.
- The partition's ELF header is represented as a synthetic section in the
combined output file, and will be used by llvm-objcopy to extract partitions.
Differential Revision: https://reviews.llvm.org/D62350
llvm-svn: 362819
Branch Target Identification (BTI) and Pointer Authentication (PAC) are
architecture features introduced in v8.5a and 8.3a respectively. The new
instructions have been added in the hint space so that binaries take
advantage of support where it exists yet still run on older hardware. The
impact of each feature is:
BTI: For executable pages that have been guarded, all indirect branches
must have a destination that is a BTI instruction of the appropriate type.
For the static linker, this means that PLT entries must have a "BTI c" as
the first instruction in the sequence. BTI is an all or nothing
property for a link unit, any indirect branch not landing on a valid
destination will cause a Branch Target Exception.
PAC: The dynamic loader encodes with PACIA the address of the destination
that the PLT entry will load from the .plt.got, placing the result in a
subset of the top-bits that are not valid virtual addresses. The PLT entry
may authenticate these top-bits using the AUTIA instruction before
branching to the destination. Use of PAC in PLT sequences is a contract
between the dynamic loader and the static linker, it is independent of
whether the relocatable objects use PAC.
BTI and PAC are independent features that can be combined. So we can have
several combinations of PLT:
- Standard with no BTI or PAC
- BTI PLT with "BTI c" as first instruction.
- PAC PLT with "AUTIA1716" before the indirect branch to X17.
- BTIPAC PLT with "BTI c" as first instruction and "AUTIA1716" before the
first indirect branch to X17.
The use of BTI and PAC in relocatable object files are encoded by feature
bits in the .note.gnu.property section in a similar way to Intel CET. There
is one AArch64 specific program property GNU_PROPERTY_AARCH64_FEATURE_1_AND
and two target feature bits defined:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI
-- All executable sections are compatible with BTI.
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC
-- All executable sections have return address signing enabled.
Due to the properties of FEATURE_1_AND the static linker can tell when all
input relocatable objects have the BTI and PAC feature bits set. The static
linker uses this to enable the appropriate PLT sequence.
Neither -> standard PLT
GNU_PROPERTY_AARCH64_FEATURE_1_BTI -> BTI PLT
GNU_PROPERTY_AARCH64_FEATURE_1_PAC -> PAC PLT
Both properties -> BTIPAC PLT
In addition to the .note.gnu.properties there are two new command line
options:
--force-bti : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_BTI and warn for every relocatable object
that does not.
--pac-plt : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_PAC. As PAC is a contract between the loader
and static linker no warning is given if it is not present in an input.
Two processor specific dynamic tags are used to communicate that a non
standard PLT sequence is being used.
DTI_AARCH64_BTI_PLT and DTI_AARCH64_BTI_PAC.
Differential Revision: https://reviews.llvm.org/D62609
llvm-svn: 362793
It was added by D46654 but is actually never used.
R_PPC64_CALL_PLT (was: R_PPC_CALL_PLT) is a static link-time constant.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62994
llvm-svn: 362788
When a function is excluded via comdat we shouldn't add it to the
final list of init functions.
Differential Revision: https://reviews.llvm.org/D62983
llvm-svn: 362769
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
We were not previously testing the comdat exclusion in bitcode objects
because we were linking two copies of the .bc file and the
`linkonce_odr` linkage type was removing the duplicate `_start` at
the LTO stage.
Now we link an bitcode and non-bitcode version both of which contains a
copy of _start. We link them in both orders, which means this test will
fail if comdat exclusion is not working correctly in bitcode parsing.
Differential Revision: https://reviews.llvm.org/D62923
llvm-svn: 362650
With r362638, llc doesn't support -relocation-model=pic with non-Emscripten
triples. Update these tests in lld which use -relocation-model=pic to also
use Emscripten triples.
llvm-svn: 362645
Any symbols defined in the LTO object are by definition the ones we
want in the final output so we skip the comdat group checking in those
cases.
This change makes the ELF code more explicit about this and means
that wasm and ELF do this in the same way.
Differential Revision: https://reviews.llvm.org/D62884
llvm-svn: 362625
Although many relocatable objects will have a single
GNU_PROPERTY_X86_FEATURE_1_AND in the .note.gnu.property section it is
permissible to have more than one, and there are tests in ld.bfd that use
it. The behavior that ld.bfd follows is to set the feature bit for a
relocatable object if any of the GNU_PROPERTY_X86_FEATURE_1_AND
have the feature bit set.
Differential Revision: https://reviews.llvm.org/D62862
llvm-svn: 362591
The age field is only there to say how many times an OBJ or a PDB was incrementally linked. It shouldn't be used to validate the link between the OBJ and the PDB.
Differential Revision: https://reviews.llvm.org/D62837
llvm-svn: 362572
Summary:
Make `wasm-ld --verbose` show data section start virtual address and name
as well, instead of just showing the size. This makes it much easier to
track which global variable is in which address when used in conjunction
with `--no-merge-data-sections`.
Patch by Guanzhong Chen
Reviewers: tlively, aheejin, sbc100, ruiu
Reviewed By: sbc100, ruiu
Subscribers: ruiu, dschuff, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62834
llvm-svn: 362548
Summary:
With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
on relocations to discarded section symbol. This was added as an error
in rLLD319404, but was not so effective before D61583 (it turned the
error to a warning).
Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
discarded .text are very common and somewhat expected. Don't warn/error
on them. As a reference, ld.bfd has a similar logic in
_bfd_elf_default_action_discarded() to allow these cases.
Delete invalid-undef-section-symbol.test because what it intended to
check is now covered by the updated comdat-discarded-reloc.s
Delete relocatable-eh-frame.s because we allow relocations from
.eh_frame as a special case now.
Reviewers: grimar, phosek, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62840
llvm-svn: 362497
We currently (ab)use the Live bit on output sections to track whether
the section has ever had an input section added to it, and then later
use it during orphan placement. This will conflict with one of my upcoming
partition-related changes that will assign all output sections to a partition
(thus marking them as live) so that they can be added to the correct segment
by the code that creates program headers.
Instead of using the Live bit for this purpose, create a new flag and
start using it to track the property explicitly.
Differential Revision: https://reviews.llvm.org/D62348
llvm-svn: 362444
Summary:
- Fixes inline call frame line table display in windbg.
- Improve llvm-pdbutil to dump extra file ids.
- Warn on unknown subsections so we don't have this kind of bug in the
future.
Reviewers: inglorion, akhuang, aganea
Subscribers: eraman, zturner, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62701
llvm-svn: 362429
We need to have all input files ready before doing debuginfo type merging.
This patch is moving the late PDB type server discovery much earlier in the process, when the explicit inputs (OBJs, LIBs) are loaded.
The short term goal is to parallelize type merging.
Differential Revision: https://reviews.llvm.org/D60095
llvm-svn: 362393
The following abstract relocation types (RelExpr) are PPC64 ELFv2 ABI specific,
not used by PPC32. So rename them to prevent confusion when the PPC32 port is improved.
* R_PPC_CALL R_PPC_CALL_PLT:
R_PPC_CALL_PLT represents R_PPC64_REL14 and R_PPC64_REL24.
If the function is not preemptable, R_PPC_CALL_PLT can be optimized to R_PPC_CALL:
the formula adjusts the symbol VA from the global entry point to the local entry point.
* R_PPC_TOC: represents R_PPC64_TOC. We don't have a test. Add one to ppc64-relocs.s
Rename it to R_PPC64_TOCBASE because `@tocbase` is the assembly form.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62800
llvm-svn: 362359
In ELF v2 ABI, R_PPC64_GOT_DTPREL16* are not relaxed.
This family of relocation types are used for variables outside of 2GiB
of the TLS block. 2 instructions cannot materialize a DTPREL offset that
is not 32-bit.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62737
llvm-svn: 362357
Fixes the remaining issue of PR41673 after D61186: with `/DISCARD/ { ... } :NONE`,
we may create an output section named `/DISCARD/`.
Note, if an input section is named `/DISCARD/`, ld.bfd discards it but
lld keeps it. It is probably not worth copying this behavior as it is unrealistic.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62768
llvm-svn: 362356
(1) {gcc,clang} -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
(2) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp not created
(3) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c a.so => .interp created
The inconsistency of (2) is due to the condition `!Config->SharedFiles.empty()`.
To make lld behave more like ld.bfd, we could change the condition to:
Config->HasDynSymTab && !Config->DynamicLinker.empty() && Script->needsInterpSection();
However, that would bring another inconsistency as can be observed with:
(4) {gcc,clang} -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
So instead, use `!Config->DynamicLinker.empty() && Script->needsInterpSection()`,
which is both simple and consistent in these cases.
The inconsistency of (4) likely originated from ld.bfd and gold's choice to have a default --dynamic-linker.
Their condition to create .interp is ANDed with (not -shared).
Since lld doesn't have a default --dynamic-linker,
compiler drivers (gcc/clang) don't pass --dynamic-linker for -shared,
and direct ld users are not supposed to specify --dynamic-linker for -shared,
we do not need the condition !Config->Shared.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62765
llvm-svn: 362355
Delete aarch64-got.s because it is covered by aarch64-tls-iele.s
Merge got-aarch64.s into aarch64-fpic-got.s by adding disassembly to the latter
Create aarch64-gnu-ifunc-nonpreemptable to unify aarch64-gnu-ifunc3.s (position-dependent executable) and aarch64-gnu-ifunc-address-pie.s (PIE)
Rename aarch64-got-reloc.s to aarch64-got-weak-undef.s
Add --no-show-raw-insn to llvm-objdump -d RUN lines
Add -pie test to arch64-tls-iele.s
Delete aarch64-tls-pie.s: it is covered by arch64-tls-iele.s and aarch64-tls-le.s
Rename aarch64-copy2.s to aarch64-nopic-plt.s: "copy2" gives false impression that the test is related to copy relocation
llvm-svn: 362294
GotEntrySize and GotPltEntrySize were added in D22288. Later, with
the introduction of wordsize() (then Config->Wordsize), they become
redundant, because there is no target that sets GotEntrySize or
GotPltEntrySize to a number different from Config->Wordsize.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D62727
llvm-svn: 362220
Symbols relative to discarded comdat sections are Undefined instead of
Defined now (after D59649 and D61583). The `== &InputSection::Discarded`
test becomes dead. I cannot find a test related to this behavior.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62725
llvm-svn: 362218
The test (the only test that checks getLinkerScriptLocation()) deleted
by r358652 can be restored by replacing R_X86_64_PLT32 with
R_X86_64_PC32, and changing -pie to -shared (preemptable). Then, the
symbol will not be a link-time constant and a -fPIC error will be
issued.
llvm-svn: 362207
Summary:
Add the names of the input files responsible for each error to the
messages.
Reviewers: sbc100, azakai
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62704
llvm-svn: 362162
Summary:
This updates all places in documentation that refer to "Mac OS X", "OS X", etc.
to instead use the modern name "macOS" when no specific version number is
mentioned.
If a specific version is mentioned, this attempts to use the OS name at the time
of that version:
* Mac OS X for 10.0 - 10.7
* OS X for 10.8 - 10.11
* macOS for 10.12 - present
Reviewers: JDevlieghere
Subscribers: mgorny, christof, arphaman, cfe-commits, lldb-commits, libcxx-commits, llvm-commits
Tags: #clang, #lldb, #libc, #llvm
Differential Revision: https://reviews.llvm.org/D62654
llvm-svn: 362113
This is a leftover from r325379.
The intention of this test was to check in a non-pic link, R_X86_64_PC32
to a STT_FUNC created a PLT. However, after the llvm-mc change in
r325569, this code path is no longer exercised. Use the r325379 trick to
keep testing R_X86_64_PC32.
llvm-svn: 362095
For the Local Dynamic case of TLSDESC, _TLS_MODULE_BASE_ is defined as a
special TLS symbol that makes:
1) Without relaxation: it produces a dynamic TLSDESC relocation that
computes 0. Adding @dtpoff to access a TLS symbol.
2) With LD->LE relaxation: _TLS_MODULE_BASE_@tpoff = 0 (lowest address in
the TLS block). Adding @tpoff to access a TLS symbol.
For 1), this saves dynamic relocations and GOT slots as otherwise
(General Dynamic) we would create an R_X86_64_TLSDESC and reserve two
GOT slots for each symbol.
Add ElfSym::TlsModuleBase and change the signature of getTlsTpOffset()
to special case _TLS_MODULE_BASE_.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62577
llvm-svn: 362078
This data structure is only needed temporarily while symbols are being
created.
This is a followup on rL361678.
Differential Revision: https://reviews.llvm.org/D62548
llvm-svn: 361977
There's no guarantee that the other partition will be loaded, so it
can't be reused.
Differential Revision: https://reviews.llvm.org/D62365
llvm-svn: 361926
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
This handles two initial relocation types R_X86_64_GOTPC32_TLSDESC and
R_X86_64_TLSDESC_CALL, as well as the GD->LE and GD->IE relaxations.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62513
llvm-svn: 361911
We need to have all input files ready before doing debuginfo type merging.
This patch is moving the late PDB type server discovery much earlier in the process, when the explicit inputs (OBJs, LIBs) are loaded.
The short term goal is to parallelize type merging.
Differential Revision: https://reviews.llvm.org/D60095
llvm-svn: 361842
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
rLLD361144 inadvertently enabled the error for --gdb-index
(in LLDDwarfObj<ELFT>::findAux()).
Relocations from .debug_info (not in comdat) to .text.* (in comdat) for
DW_AT_low_pc are common. If an .text.* was discarded, rLLD361144 would error,
which was unexpected. (Note, if we don't error as this patch does,
InputSection::relocateNonAlloc() will resolve such relocations).
llvm-svn: 361830
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61583
llvm-svn: 361792
This patch simplifies ELFFile instance initialization by merging
two similar functions into a single function and call it from the
ctor.
llvm-svn: 361789
When function signatures don't match and the undefined function is not
called directly (i.e. only has its address taken) we don't issue a
warning or create a runtime thunk for the undefined function.
Instead in this case we simply use the defined version of the function.
This is possible since checking signatures of dynamic calls happens
at runtime so any invalid usage will still result in a runtime error.
This is needed to allow C++ programs to link without generating
warnings. Its not uncommon in C++ for vtables to be populated by
function address whee the signature of the function is not known in the
compilation unit. In this case clang declares the method as void(void)
and relies on the vtable caller casting the data back to the correct
signature.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=40412
Differential Revision: https://reviews.llvm.org/D62153
llvm-svn: 361678
Shaves another pointer off of SectionChunk, reducing the size from 96 to
88 bytes, down from 144 before I started working on this. Combined with
D62356, this reduced peak memory usage when linking chrome_child.dll
from 713MB to 675MB, or 5%.
Create NonSectionChunk to provide virtual dispatch to the rest of the
chunk types.
Reviewers: ruiu, aganea
Differential Revision: https://reviews.llvm.org/D62362
llvm-svn: 361667
Shaves another 8 bytes off of SectionChunk, the most commonly allocated
type in LLD.
These indices are only valid after we've assigned chunks to output
sections and removed empty sections, so do that in a new pass.
Reviewers: ruiu, aganea
Differential Revision: https://reviews.llvm.org/D62356
llvm-svn: 361657
This can be useful for post-link tools and for testing. Sometimes
it can be useful to produces a regular executable but with relocations
preserved.
Differential Revision: https://reviews.llvm.org/D62378
llvm-svn: 361635
Patch by Stefan Schmidt.
This adds the /filealign parameter to lld, which allows to specify the
section alignment in the output file (as it does on Microsoft's
link.exe).
This is required to be able to load dynamically linked libraries on the
original Xbox, where the debugger monitor expects the section alignment
in the file to be the same as in memory.
llvm-svn: 361634
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
This only needs to be done for MergeChunks, so just do that in a
separate pass in the Writer.
This is one small step towards eliminating the vtable in Chunk.
llvm-svn: 361573
The KeepUnique bit is used during ICF, which only operates on
SectionChunks, so only SectionChunks need it. This frees up a byte in
Chunk, which I plan to use in a follow-up change.
llvm-svn: 361549
OptTable treats arguments starting with / that aren't a known option
as filenames. This means lld-link's and clang-cl's typo correction for
unknown flags didn't do spell checking for misspelled options that start
with /.
I first tried changing OptTable, but that got pretty messy, see PR41787
comments 2 and 3.
Instead, let lld-link's and clang's (including clang-cl's) "file not
found" diagnostic check if a non-existent file looks like it could be a
mis-spelled option, and if so add a "did you mean" suggestion to the
"file not found" diagnostic.
While here, make formatting of a few diagnostics a bit more
self-consistent.
Fixes PR41787.
Differential Revision: https://reviews.llvm.org/D62276
llvm-svn: 361518
My recent commits separated symbol resolution from the symbol table,
so the functions to resolve symbols are now in a somewhat wrong file.
This patch moves it to Symbols.cpp.
The functions are now member functions of the symbol.
This is code move change. I modified function names so that they are
appropriate as member functions, though. No functionality change
intended.
Differential Revision: https://reviews.llvm.org/D62290
llvm-svn: 361474
--{start,end}-lib give files grouped by the options the archive file
semantics. That is, each object file between them acts as if it were
in an archive file whose sole member is the file.
Therefore, files between --{start,end}-lib are linked to the final
output only if they are needed to resolve some undefined symbols.
Previously, the feature was implemented this way:
1. We read a symbol table and insert defined symbols to the symbol
table as lazy symbols.
2. If an undefind symbol is resolved to a lazy symbol, that lazy
symbol instantiate ObjFile class for that symbol, which re-insert
all defined symbols to the symbol table.
So, if an ObjFile is instantiated, defined symbols are inserted to the
symbol table twice. Since inserting long symbol names is not cheap,
there's a room to optimize here.
This patch optimzies it. Now, LazyObjFile remembers symbol handles and
passed them over to a new ObjFile instance, so that the ObjFile
doesn't insert the same strings.
Here is a quick benchmark to link clang. "Original" is the original
lld with unmodified command line options. For "Case 1" and "Case 2", I
extracted all files from archive files and replace .a's in a command
line with .o's wrapped with --{start,end}-lib. I used the original lld
for Case 1" and use this patch for Case 2.
Original: 5.892
Case 1: 6.001 (+1.8%)
Case 2: 5.701 (-3.2%)
So, interestingly, --{start,end}-lib are now faster than the regular
linking scheme with archive files. That's perhaps not too surprising,
though, because for regular archive files, we look up the symbol table
with the same string twice.
Differential Revision: https://reviews.llvm.org/D62188
llvm-svn: 361473
This is a minor improvement inspired by https://bugs.llvm.org/show_bug.cgi?id=38303.
A person reported that he observed message complaining about unsupported R_ARM_V4BX:
error: can't create dynamic relocation R_ARM_V4BX against local symbol in readonly segment; recompile object files with -fPIC
But with -z notext he only saw a relocation number, what is not convenient:
error: ../../gfx/cairo/libpixman/src/pixman-arm-neon-asm-bilinear.o:(.text+0x4F0): unrecognized reloc 40
Also, in the error messages we use relocation but not reloc.
With this patch we start to print one of the following messages:
error: file.o: unrecognized relocation Unknown(999)
error: file.o: unrecognized relocation R_X_KNOWN_BY_LLVM_BUT_UNSUPPORTED_BY_LLD_NAME
There is no way to write a test for that I believe.
Differential revision: https://reviews.llvm.org/D62237
llvm-svn: 361472
Summary:
Before we can assign entries in the function of global index space
we need to know the total number of function and global imports
respectively.
To avoid programmer error this change seals that imports section before
assigned function and global index space. Any attempt to add an import
after the section is sealed will assert.
The lack this such as check caused https://reviews.llvm.org/D61876
to be reverted. I'm also trying to craft a test case the this
failure.
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62240
llvm-svn: 361470
Also renames it LinkerDriver::compileBitcodeFiles.
The function doesn't logically belong to SymbolTable. We added this
function to the symbol table because symbol table used to be a
container of input files. This is no longer the case.
Differential Revision: https://reviews.llvm.org/D62291
llvm-svn: 361469
The previous patch lost the call to PowerOf2Ceil, which causes LLD to
crash when handling common symbols with a non-power-of-2 size. I tweaked
the existing common.test to make the bsspad16 common symbol be 15 bytes
to add coverage for this case.
llvm-svn: 361426
Symbol's NameSize is computed lazily. Currently, when we replace a symbol,
a cached length value can be discarded. This patch propagates that value.
Differential Revision: https://reviews.llvm.org/D62234
llvm-svn: 361364
Rather than report "undefined symbol: ", give more informative message
about the object file that defines the discarded section.
In particular, PR41133, if the section is a discarded COMDAT, print the
section group signature and the object file with the prevailing
definition. This is useful to track down some ODR issues.
We need to
* add `uint32_t DiscardedSecIdx` to Undefined for this feature.
* make ComdatGroups public and change its type to DenseMap<CachedHashStringRef, const InputFile *>
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D59649
llvm-svn: 361359
This reverts commit 7804dbddcc.
This change broke a bunch of tests of the WebAssembly waterfall.
Will hopefully reland with increased test coverage.
llvm-svn: 361273
--reproduce is a convenient option for debugging. If you invoke lld
with `--reproduce=repro.tar`, it creates `repro.tar` with all input
files and the command line options given to the linker, so that it is
very easy to run lld with the exact same inputs.
ELF and Windows lld have this option.
This patch add that option to lld/wasm.
Differential Revision: https://reviews.llvm.org/D62170
llvm-svn: 361244
Major refactor to better match the structure of the ELF linker.
- Split out relocation processing into scanRelocations
- Split out synthetic sections into their own classes.
Differential Revision: https://reviews.llvm.org/D61811
llvm-svn: 361233
For memory5.test, ld.bfd appears to ignore `. += 0x2000;`, so the test was testing
a wrong behavior. After deleting the code added in rLLD336335, we match ld.bfd and thus fix PR41357.
PR37836 (memory4.test) seems to have been fixed by another change.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62177
llvm-svn: 361228
For a reference to a local symbol, ld.bfd and gold error if the symbol
is defined in a discarded section but accept it if the symbol is
undefined. This inconsistent behavior seems unnecessary for us (it
probably makes sense for them as they differentiate local/global
symbols, the error would mean more code).
Catch such errors. Symbol index 0 may be used by marker relocations,
e.g. R_*_NONE R_ARM_V4BX. Don't error on them.
The difference from D61563 (which caused msan failure) is we don't call
Sym.computeBinding() on local symbols - VersionId is uninitialized.
llvm-svn: 361213
Summary:
Valid section or chunk alignments are powers of 2 in the range [1,
8192]. These can be stored more canonically in log2 form to free up some
bits in Chunk. Combined with D61696, SectionChunk gets 8 bytes smaller.
Reviewers: ruiu, aganea
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61698
llvm-svn: 361206
This patch is a fix for https://bugs.llvm.org/show_bug.cgi?id=41804.
We try to solve the precedence of user-specified symbol ordering file and C3 ordering provided as call graph. It deals with two case:
(1) When both --symbol-ordering-file=<file> and --call-graph-order-file=<file> are present, whichever flag comes later will take precedence.
(2) When only --symbol-ordering-file=<file> is present, it takes precedence over implicit call graph (CGProfile) generated by CGProfilePass enabled in new pass manager.
llvm-svn: 361190
We currently sort dynamic relocations by (!is_relative,symbol_index).
Add r_offset as the third key. This makes `readelf -r` debugging easier
(relocations to the same symbol are ordered by r_offset).
Refactor the test combreloc.s (renamed from combrelocs.s) to check
R_X86_64_RELATIVE, and delete --expand-relocs.
The difference from the reverted D61477 is that we keep !is_relative as
the first key. In local dynamic TLS model, DTPMOD (e.g.
R_ARM_TLS_DTPMOD32 R_X86_64_DTPMOD and R_PPC{,64}_DTPMOD) may use 0 as
the symbol index.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D62141
llvm-svn: 361164
This reverts commit r361144. It causes a use-of-uninitialized-value in
maybeReportUndefined at llvm/tools/lld/ELF/Relocations.cpp:682, as
detected by MemorySanitizer when local-undefined-symbol.s test is run.
llvm-svn: 361162
This reverts commit r361125. This linker change breaks shared libraries
in some subtle way on x86_64. (Specifically, gold segfaults when
loading the LLVMgold.so plugin linked with lldb with this patch.)
llvm-svn: 361150
For R_TLS:
1) Delete Sym.isTls() . The assembler ensures the symbol is STT_TLS.
If not (the input is broken), we would crash (dereferencing null Out::TlsPhdr).
2) Change Sym.isUndefWeak() to Sym.isUndefined(), otherwise with --noinhibit-exec
we would still evaluate the symbol and crash.
3) Return A if the symbol is undefined. This is PR40570.
The case is probably unrealistic but returning A matches R_ABS and the
behavior of several dynamic loaders.
R_NEG_TLS is obsoleted Sun TLS we don't fully support, but
R_RELAX_TLS_GD_TO_LE_NEG is still used by GD->LE relaxation (subl $var@tpoff,%eax).
They should add the addend. Unfortunately I can't test it as compilers don't seem to generate non-zero implicit addends.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62098
llvm-svn: 361146
For a reference to a local symbol, ld.bfd and gold error if the symbol
is defined in a discarded section but accept it if the symbol is
undefined. This inconsistent behavior seems unnecessary for us (it
probably makes sense for them as they differentiate local/global
symbols, the error would mean more code).
Weaken the condition to getSymbol(Config->IsMips64EL) == 0 to catch such
errors. The symbol index can be 0 (e.g. R_*_NONE R_ARM_V4BX) and we shouldn't error on them.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61563
llvm-svn: 361144
Fixes PR41692.
We currently sort dynamic relocations by (!is_relative,symbol_index).
Change it to (symbol_index,r_offset). We still place relative
relocations first because R_*_RELATIVE are the only dynamic relocations
with 0 symbol index (except on MIPS, which doesn't use DT_REL[A]COUNT
anyway).
This makes `readelf -r` debugging easier (relocations to the same symbol
are ordered by r_offset).
Refactor the test combreloc.s (renamed from combrelocs.s) to check
R_X86_64_RELATIVE, and delete --expand-relocs.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61477
llvm-svn: 361125
This is a mechanical rewrite of replaceSymbol(A, B) to A->replace(B).
I also added a comment to Symbol::replace().
Technically this change is not necessary, but this change makes code a
bit more concise.
Differential Revision: https://reviews.llvm.org/D62117
llvm-svn: 361123
Otherwise, we may set IsPreemptible (e.g. --dynamic-list) then clear it
(in replaceCommonSymbols()).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62107
llvm-svn: 361122
This reverts D53906.
D53906 increased p_align of PT_TLS on ARM/AArch64 to 32/64 to make the
static TLS layout compatible with Android Bionic's ELF TLS. However,
this may cause glibc ARM/AArch64 programs to crash (see PR41527).
The faulty PT_TLS in the executable satisfies p_vaddr%p_align != 0. The
remainder is normally 0 but may be non-zero with the hack in place. The
problem is that we increase PT_TLS's p_align after OutputSections'
addresses are fixed (assignAddress()). It is possible that
p_vaddr%old_p_align = 0 while p_vaddr%new_p_align != 0.
For a thread local variable defined in the executable, lld computed TLS
offset (local exec) is different from glibc computed TLS offset from
another module (initial exec/generic dynamic). Note: PR41527 said the
bug affects initial exec but actually generic dynamic is affected as
well.
(glibc is correct in that it compute offsets that satisfy
`offset%p_align == p_vaddr%p_align`, which is a basic ELF requirement.
This hack appears to work on FreeBSD rtld, musl<=1.1.22, and Bionic, but
that is just because they (and lld) incorrectly compute offsets that
satisfy `offset%p_align = 0` instead.)
Android developers are fine to revert this patch, carry this patch in
their tree before figuring out a long-term solution (e.g. a dummy .tdata
with sh_addralign=64 sh_size={0,1} in crtbegin*.o files. The overhead is
now insignificant after D62059).
Reviewed By: rprichard, srhines
Differential Revision: https://reviews.llvm.org/D62055
llvm-svn: 361090
After D62059, we don't align p_memsz of PT_TLS to p_align. The
getRelocTargetVA formula should align it instead.
It becomes clear that R_NEG_TLS and R_TLS are opposite from each other.
In i386-tls-le-align.s, I put ret after call ___tls_get_addr@plt as
otherwise ld.bfd would reject the relaxation:
TLS transition from R_386_TLS_GD to R_386_TLS_LE_32 against `a' at 0x3 in section `.text' failed
llvm-svn: 361088
As Ryan Prichard pointed out, after D62059, the TP offset is incorrect.
Add x86-64-tls-le-align.s to check this. Better formulae for both
variants should take p_vaddr%p_align into account (offset%p_align =
p_vaddr%p_align is a basic ELF requirement), but I can't find a way to
test the behavior.
llvm-svn: 361084
On Elf*_Rel targets, for a relocation to a section symbol, an R_ABS is
added which will be used by relocateOne() to compute the implicit
addend.
Addends of R_*_NONE should be ignored, so don't emit an R_ABS.
This fixes crashes on X86 and ARM because their relocateOne() do not
handle R_*_NONE.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D62052
llvm-svn: 361036
The code was added in r252352, probably to address some layout issues.
Actually PT_TLS's p_memsz doesn't need to be aligned on either variant.
ld.bfd doesn't do that.
In case of larger alignment (e.g. 64 for Android Bionic on AArch64, see
D62055), this may make the overhead smaller.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62059
llvm-svn: 361029
Libtool concludes that the linker doesn't support shared libraries,
unless this flag is listed in the output of --help.
Differential Revision: https://reviews.llvm.org/D62053
llvm-svn: 361017
When integrating PDB output in mingw targeting build systems, it
might be a lot of extra work to specify unique file names for
the pdb output. Therefore allow omitting the actual file name
and let it implicitly be the same name as the linker output, with
a pdb extension.
As the current form of the pdb option takes a separate parameter value,
e.g. "-pdb out.pdb", it is impractical to leave out the parameter value.
Therefore, introduce a second syntax for the option, with an equals
sign, like -pdb=out.pdb, where the value easily can be omitted.
The form -pdb= for requesting pdb files with an implicit name should
work fine, even though it looks a bit unconventional in that form.
Differential Revision: https://reviews.llvm.org/D62004
llvm-svn: 361014
Change R_{386,AARCH64}_NONE yaml2obj tests/icf10.test to use assembly
Add relocation-none-{arm,x86_64}.s.
Check the referenced section survives under --gc-sections.
Check -r copies R_X86_64_NONE R_AARCH64_NONE. (Elf*_Rel arches currently have a bug)
Delete the dtrace tests as they are covered by the R_X86_64_NONE test.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62051
llvm-svn: 361013
This patch implements a limited form of autolinking primarily designed to allow
either the --dependent-library compiler option, or "comment lib" pragmas (
https://docs.microsoft.com/en-us/cpp/preprocessor/comment-c-cpp?view=vs-2017) in
C/C++ e.g. #pragma comment(lib, "foo"), to cause an ELF linker to automatically
add the specified library to the link when processing the input file generated
by the compiler.
Currently this extension is unique to LLVM and LLD. However, care has been taken
to design this feature so that it could be supported by other ELF linkers.
The design goals were to provide:
- A simple linking model for developers to reason about.
- The ability to to override autolinking from the linker command line.
- Source code compatibility, where possible, with "comment lib" pragmas in other
environments (MSVC in particular).
Dependent library support is implemented differently for ELF platforms than on
the other platforms. Primarily this difference is that on ELF we pass the
dependent library specifiers directly to the linker without manipulating them.
This is in contrast to other platforms where they are mapped to a specific
linker option by the compiler. This difference is a result of the greater
variety of ELF linkers and the fact that ELF linkers tend to handle libraries in
a more complicated fashion than on other platforms. This forces us to defer
handling the specifiers to the linker.
In order to achieve a level of source code compatibility with other platforms
we have restricted this feature to work with libraries that meet the following
"reasonable" requirements:
1. There are no competing defined symbols in a given set of libraries, or
if they exist, the program owner doesn't care which is linked to their
program.
2. There may be circular dependencies between libraries.
The binary representation is a mergeable string section (SHF_MERGE,
SHF_STRINGS), called .deplibs, with custom type SHT_LLVM_DEPENDENT_LIBRARIES
(0x6fff4c04). The compiler forms this section by concatenating the arguments of
the "comment lib" pragmas and --dependent-library options in the order they are
encountered. Partial (-r, -Ur) links are handled by concatenating .deplibs
sections with the normal mergeable string section rules. As an example, #pragma
comment(lib, "foo") would result in:
.section ".deplibs","MS",@llvm_dependent_libraries,1
.asciz "foo"
For LTO, equivalent information to the contents of a the .deplibs section can be
retrieved by the LLD for bitcode input files.
LLD processes the dependent library specifiers in the following way:
1. Dependent libraries which are found from the specifiers in .deplibs sections
of relocatable object files are added when the linker decides to include that
file (which could itself be in a library) in the link. Dependent libraries
behave as if they were appended to the command line after all other options. As
a consequence the set of dependent libraries are searched last to resolve
symbols.
2. It is an error if a file cannot be found for a given specifier.
3. Any command line options in effect at the end of the command line parsing apply
to the dependent libraries, e.g. --whole-archive.
4. The linker tries to add a library or relocatable object file from each of the
strings in a .deplibs section by; first, handling the string as if it was
specified on the command line; second, by looking for the string in each of the
library search paths in turn; third, by looking for a lib<string>.a or
lib<string>.so (depending on the current mode of the linker) in each of the
library search paths.
5. A new command line option --no-dependent-libraries tells LLD to ignore the
dependent libraries.
Rationale for the above points:
1. Adding the dependent libraries last makes the process simple to understand
from a developers perspective. All linkers are able to implement this scheme.
2. Error-ing for libraries that are not found seems like better behavior than
failing the link during symbol resolution.
3. It seems useful for the user to be able to apply command line options which
will affect all of the dependent libraries. There is a potential problem of
surprise for developers, who might not realize that these options would apply
to these "invisible" input files; however, despite the potential for surprise,
this is easy for developers to reason about and gives developers the control
that they may require.
4. This algorithm takes into account all of the different ways that ELF linkers
find input files. The different search methods are tried by the linker in most
obvious to least obvious order.
5. I considered adding finer grained control over which dependent libraries were
ignored (e.g. MSVC has /nodefaultlib:<library>); however, I concluded that this
is not necessary: if finer control is required developers can fall back to using
the command line directly.
RFC thread: http://lists.llvm.org/pipermail/llvm-dev/2019-March/131004.html.
Differential Revision: https://reviews.llvm.org/D60274
llvm-svn: 360984
This is the last patch of the series of patches to make it possible to
resolve symbols without asking SymbolTable to do so.
The main point of this patch is the introduction of
`elf::resolveSymbol(Symbol *Old, Symbol *New)`. That function resolves
or merges given symbols by examining symbol types and call
replaceSymbol (which memcpy's New to Old) if necessary.
With the new function, we have now separated symbol resolution from
symbol lookup. If you already have a Symbol pointer, you can directly
resolve the symbol without asking SymbolTable to do that.
Now that the nice abstraction become available, I can start working on
performance improvement of the linker. As a starter, I'm thinking of
making --{start,end}-lib faster.
--{start,end}-lib is currently unnecessarily slow because it looks up
the symbol table twice for each symbol.
- The first hash table lookup/insertion occurs when we instantiate a
LazyObject file to insert LazyObject symbols.
- The second hash table lookup/insertion occurs when we create an
ObjFile from LazyObject file. That overwrites LazyObject symbols
with Defined symbols.
I think it is not too hard to see how we can now eliminate the second
hash table lookup. We can keep LazyObject symbols in Step 1, and then
call elf::resolveSymbol() to do Step 2.
Differential Revision: https://reviews.llvm.org/D61898
llvm-svn: 360975
The change broke some scenarios where debug information is still
needed, although MarkLive cannot see it, including the
Chromium/Android build. Reverting to unbreak that build.
llvm-svn: 360955
Previously these sections were being generated during their
constructors. This moves the work to finalizeContent, and also does
the same for the relocation sections because their contents depends
on the final layout too.
This change is part of a larger refactor to how we deal with synthetic
sections: https://reviews.llvm.org/D61811
Differential Revision: https://reviews.llvm.org/D61971
llvm-svn: 360941
Module IDs can appear in diagnostic messages.
This patch adds some auxiliary symbols to improve their readability.
Differential Revision: https://reviews.llvm.org/D61857
llvm-svn: 360858
Previously, we handled common symbols as a kind of Defined symbol,
but what we were doing for common symbols is pretty different from
regular defined symbols.
Common symbol and defined symbol are probably as different as shared
symbol and defined symbols are different.
This patch introduces CommonSymbol to represent common symbols.
After symbols are resolved, they are converted to Defined symbols
residing in a .bss section.
Differential Revision: https://reviews.llvm.org/D61895
llvm-svn: 360841
SymbolTable's add-family functions have lots of parameters because
when they have to create a new symbol, they forward given arguments
to Symbol's constructors. Therefore, the functions take at least as
many arguments as their corresponding constructors.
This patch simplifies the add-family functions. Now, the functions
take a symbol instead of arguments to construct a symbol. If there's
no existing symbol, a given symbol is memcpy'ed to the symbol table.
Otherwise, the functions attempt to merge the existing and a given
new symbol.
I also eliminated `CanOmitFromDynSym` parameter, so that the functions
take really one argument.
Symbol classes are trivially constructible, so looks like constructing
them to pass to add-family functions is as cheap as passing a lot of
arguments to the functions. A quick benchmark showed that this patch
seems performance-neutral.
This is a preparation for
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131902.html
Differential Revision: https://reviews.llvm.org/D61855
llvm-svn: 360838
The tracing goes to stdout so this is not needed.
Also remove the "not" from the final check in ELF/trace-symbols.s.
According the comment the check is that we don't crash, so we should
be checking for success here. Previously this step is error'ing with
undefined symbols because it didn't include all the needed objects.
Differential Revision: https://reviews.llvm.org/D61928
llvm-svn: 360794
But don't apply comdat groups when loading the LTO object files.
This is basically the same logic used by the ELF linker.
Differential Revision: https://reviews.llvm.org/D61924
llvm-svn: 360782
Patch by Mark Johnston!
Summary:
When the option is configured, ifunc calls do not go through the PLT;
rather, they appear as regular function calls with relocations
referencing the ifunc symbol, and the resolver is invoked when
applying the relocation. This is intended for use in freestanding
environments where text relocations are permissible and is incompatible
with the -z text option. The option is motivated by ifunc usage in the
FreeBSD kernel, where ifuncs are used to elide CPU feature flag bit
checks in hot paths. Instead of replacing the cost of a branch with that
of an indirect function call, the -z ifunc-noplt option is used to ensure
that ifunc calls carry no hidden overhead relative to normal function
calls.
Test Plan:
I added a couple of regression tests and tested the FreeBSD kernel
build using the latest lld sources.
To demonstrate the effects of the change, I used a micro-benchmark
which results in frequent invocations of a FreeBSD kernel ifunc. The
benchmark was run with and without IBRS enabled, and with and without
-zifunc-noplt configured. The observed speedup is small and consistent,
and is significantly larger with IBRS enabled:
https://people.freebsd.org/~markj/ifunc-noplt/noibrs.txthttps://people.freebsd.org/~markj/ifunc-noplt/ibrs.txt
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D61613
llvm-svn: 360685
See D61891: llvm had a bug that might create invalid (DW_AT_low_pc,DW_AT_high_pc) pairs or range list entries due to missing DW_AT_addr_base.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61889
llvm-svn: 360679
The symbol table used to be a container of vectors of input files,
but that's no longer the case because the vectors are moved out of
SymbolTable and are now global variables.
Therefore, addFile doesn't have to belong to any class. This patch
moves the function out of the class.
This patch is a preparation for my RFC [1].
[1] http://lists.llvm.org/pipermail/llvm-dev/2019-April/131902.html
Differential Revision: https://reviews.llvm.org/D61854
llvm-svn: 360666
Change
std::error_code getSectionContents(DataRefImpl, StringRef &) const;
to
Expected<ArrayRef<uint8_t>> getSectionContents(DataRefImpl) const;
Many object formats use ArrayRef<uint8_t> as the underlying type, which
is generally better than StringRef to represent binary data, so change
the type to decrease the number of type conversions.
Reviewed By: ruiu, sbc100
Differential Revision: https://reviews.llvm.org/D61781
llvm-svn: 360648
The -n (--nmagic) disables page alignment, and acts as a -Bstatic
The -N (--omagic) does what -n does but also marks the executable segment as
writeable. As page alignment is disabled headers are not allocated unless
explicit in the linker script.
To disable page alignment in LLD we choose to set the page sizes to 1 so
that any alignment based on the page size does nothing. To set the
Target->PageSize to 1 we implement -z common-page-size, which has the side
effect of allowing the user to set the value as well.
Setting the page alignments to 1 does mean that any use of
CONSTANT(MAXPAGESIZE) or CONSTANT(COMMONPAGESIZE) in a linker script will
return 1, unlike in ld.bfd. However given that -n and -N disable paging
these probably shouldn't be used in a linker script where -n or -N is in
use.
Differential Revision: https://reviews.llvm.org/D61688
llvm-svn: 360593
These yaml test cases appear to have been affected by PR41836
Right now what happens is that these empty .bss sections are merged into
.data, then the .data output section ends up having a zero virtual size,
and it is discarded from the output after addresses are assigned.
However, we've already assigned OutputSections to Chunks, so we don't
correctly report the zero-sized chunks that were in there as having been
discarded. Soon, we will report them as discarded, so these test cases
need to be updated to have a non-zero size so they aren't discarded.
llvm-svn: 360476
Add support for ".hidden" ".internal" ".protected" and " 0x%02x" for
other st_other bits used by some architectures.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D61718
llvm-svn: 360439
Peter Smith