Move all variables at file-scope or function-static-scope into a hosting structure (lld::CommonLinkerContext) that lives at lldMain()-scope. Drivers will inherit from this structure and add their own global state, in the same way as for the existing COFFLinkerContext.
See discussion in https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html
Differential Revision: https://reviews.llvm.org/D108850
BaseCommand was picked when PHDRS/INSERT/etc were not implemented. Rename it to
SectionCommand to match `sectionCommands` and make it clear that the commands
are used in SECTIONS (except a special case for SymbolAssignment).
Also, improve naming of some BaseCommand variables (base -> cmd).
This partially reverts r315409: the description applies to LinkerScript, but not
to OutputSection.
The name "sectionCommands" is used in both LinkerScript::sectionCommands and
OutputSection::sectionCommands, which may lead to confusion.
"commands" in OutputSection has no ambiguity because there are no other types
of commands.
The attribute 'r' allows (or disallows for the negative case) read-only
sections, i.e. ones without the SHF_WRITE flag, to be assigned to the
memory region. Before the patch, lld could put a section in the wrong
region or fail with "error: no memory region specified for section".
Differential Revision: https://reviews.llvm.org/D113771
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
# In a.out, foo3@v1 is incorrectly exported.
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
For
```
SECTIONS {
text.0 : {}
text.1 : {}
text.2 : {}
} INSERT AFTER .data;
```
the current order is `.data text.2 text.1 text.0`. It makes more sense to
preserve the specified order and thus improve compatibility with GNU ld.
For
```
SECTIONS { text.0 : {} } INSERT AFTER .data;
SECTIONS { text.3 : {} } INSERT AFTER .data;
```
GNU ld somehow collects sections with `INSERT AFTER .data` together (IMO
inconsistent) but I think it makes more sense to execute the commands in order
and get `.data text.3 text.0` instead.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D105158
Modify the D13209 logic: for a script inside the sysroot, if an absolute path
does not exist, report an error instead of falling back to the path without the
sysroot prefix.
This matches GNU ld, which makes sense to me: we don't want to find an arbitrary
file in the host.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D104894
This implements https://sourceware.org/bugzilla/show_bug.cgi?id=26404
An `OVERWRITE_SECTIONS` command is a `SECTIONS` variant which contains several
output section descriptions. The output sections do not have specify an order.
Similar to `INSERT [BEFORE|AFTER]`, `LinkerScript::hasSectionsCommand` is not
set, so the built-in rules (see `docs/ELF/linker_script.rst`) still apply.
`OVERWRITE_SECTIONS` can be more convenient than `INSERT` because it does not
need an anchor section.
The initial syntax is intentionally narrow to facilitate backward compatible
extensions in the future. Symbol assignments cannot be used.
This feature is versatile. To list a few usage:
* Use `section : { KEEP(...) }` to retain input sections under GC
* Define encapsulation symbols (start/end) for an output section
* Use `section : ALIGN(...) : { ... }` to overalign an output section (similar to ld64 `-sectalign`)
When an output section is specified by both `OVERWRITE_SECTIONS` and
`INSERT`, `INSERT` is processed after overwrite sections. To make this work,
this patch changes `InsertCommand` to use name based matching instead of pointer
based matching. (This may cause a difference when `INSERT` moves one output
section more than once. Such duplicate commands should not be used in practice
(seems that in GNU ld the output sections may just disappear).)
A linker script can be used without -T/--script. The traditional `SECTIONS`
commands are concatenated, so a wrong rule can be more noticeable from the
section order. This feature if misused can be less noticeable, just like
`INSERT`.
Differential Revision: https://reviews.llvm.org/D103303
GNU ld supports `.` and `$` in symbol names while LLD doesn't support them in
`readPrimary` expressions. Using `.` can result in such an error:
```
https://github.com/ClangBuiltLinux/linux/issues/1318
ld.lld: error: ./arch/powerpc/kernel/vmlinux.lds:255: malformed number: .TOC.
>>> __toc_ptr = (DEFINED (.TOC.) ? .TOC. : ADDR (.got)) + 0x8000;
```
Allow `.` (ppc64 special symbol `.TOC.`) and `$` (RISC-V special symbol `__global_pointer$`).
Change `diag[3-5].test` to use an invalid character `^`.
Note: GNU ld allows `~` in non-leading positions of a symbol name. `~`
is not used in practice, conflicts with the unary operator, and can
cause some parsing difficulty, so this patch does not add it.
Differential Revision: https://reviews.llvm.org/D98306
Add support for linking powerpcle code in LLD.
Rewrite lld/test/ELF/emulation-ppc.s to use a shared check block and add powerpcle tests.
Update tests.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93917
Follow the naming set by TI's own GCC-based toolchain.
Also, force the `osabi` field to `ELFOSABI_STANDALONE`, this matches GNU LD's output (the patching is done in `elf32_msp430_post_process_headers`).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D92931
The second `SORT` in `*(SORT(...) SORT(...))` is incorrectly parsed as a file pattern.
Fix the bug by stopping at `SORT*` in `readInputSectionsList`.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D91180
I noticed when running a large link with the --time-trace option that
there were several areas which were missing any specific time trace
categories (aside from the generic link/ExecuteLinker categories). This
patch adds new categories to fill most of the "gaps", or to provide more
detail than was previously provided.
Reviewed by: MaskRay, grimar, russell.gallop
Differential Revision: https://reviews.llvm.org/D90686
This patch adds support for the LOG2CEIL builtin function in linker scripts: https://sourceware.org/binutils/docs/ld/Builtin-Functions.html#index-LOG2CEIL_0028exp_0029
As documented for LD, and to keep compatibility, LOG2CEIL(0) returns 0 (not -inf).
The test vectors are somewhat arbitrary. We check minimum values (0-4); middle values (2^32, and 2^32+1); and the maximum value (2^64-1).
The checks for LOG2CEIL explicitly use full 64-bit values (16 hex digits). This is needed to properly verify that -inf and other interesting results aren't returned. (For some reason, all other tests in operators.test use only 14 digits.)
Differential revision: https://reviews.llvm.org/D84054
A hasWildcard pattern iterates over symVector, which can be slow when there
are many --export-dynamic-symbol. In optimistic cases, most patterns don't use
a wildcard character. hasWildcard: false can avoid a symbol table iteration.
While here, add two tests using `[` and `?`, respectively.
GNU ld from binutils 2.35 onwards will likely support
--export-dynamic-symbol but with different semantics.
https://sourceware.org/pipermail/binutils/2020-May/111302.html
Differences:
1. -export-dynamic-symbol is not supported
2. --export-dynamic-symbol takes a glob argument
3. --export-dynamic-symbol can suppress binding the references to the definition within the shared object if (-Bsymbolic or -Bsymbolic-functions)
4. --export-dynamic-symbol does not imply -u
I don't think the first three points can affect any user.
For the fourth point, Not implying -u can lead to some archive members unfetched.
Add -u foo to restore the previous behavior.
Exact semantics:
* -no-pie or -pie: matched non-local defined symbols will be added to the dynamic symbol table.
* -shared: matched non-local STV_DEFAULT symbols will not be bound to definitions within the shared object
even if they would otherwise be due to -Bsymbolic, -Bsymbolic-functions, or --dynamic-list.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D80487
For a relative path in INPUT() or GROUP(), this patch changes the search order by adding the directory of the current linker script.
The new search order (consistent with GNU ld >= 2.35 regarding the new test `test/ELF/input-relative.s`):
1. the directory of the current linker script (GNU ld from Binutils 2.35 onwards; https://sourceware.org/bugzilla/show_bug.cgi?id=25806)
2. the current working directory
3. library paths (-L)
This behavior makes it convenient to replace a .so or .a with a linker script with additional input. For example, glibc
```
% cat /usr/lib/x86_64-linux-gnu/libm.a
/* GNU ld script
*/
OUTPUT_FORMAT(elf64-x86-64)
GROUP ( /usr/lib/x86_64-linux-gnu/libm-2.29.a /usr/lib/x86_64-linux-gnu/libmvec.a )
```
could be simplified as `GROUP(libm-2.29.a libmvec.a)`.
Another example is to make libc++.a a linker script:
```
INPUT(libc++.a.1 libc++abi.a)
```
Note, -l is not affected.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D77779
Implemented a bunch of relocations found in binaries with medium/large code model and the Local-Exec TLS model. The binaries link and run fine in Qemu.
In addition, the emulation `elf64_sparc` is now recognized.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D77672
This fixes PR# 45336.
Output sections described in a linker script as NOLOAD with no input sections would be marked as SHT_PROGBITS.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D76981
This essentially drops the change by r288021 (discussed with Georgii Rymar
and Peter Smith and noted down in the release note of lld 10).
GNU ld>=2.31 enables -z separate-code by default for Linux x86. By
default (in the absence of a PHDRS command) a readonly PT_LOAD is
created, which is different from its traditional behavior.
Not emulating GNU ld's traditional behavior is good for us because it
improves code consistency (we create a readonly PT_LOAD in the absence
of a SECTIONS command).
Users can add --no-rosegment to restore the previous behavior (combined
readonly and read-executable sections in a single RX PT_LOAD).
Fixes https://bugs.llvm.org/show_bug.cgi?id=44903
It is about the following case:
```
SECTIONS {
.foo : { *(.foo) } =0x90909090
/DISCARD/ : { *(.bar) }
}
```
Here while parsing the fill expression we treated the
"/" of "/DISCARD/" as operator.
With this change, suggested by Fangrui Song, we do
not allow expressions with operators (e.g. "0x1100 + 0x22")
that are not wrapped into round brackets. It should not
be an issue for users, but helps to resolve parsing ambiguity.
Differential revision: https://reviews.llvm.org/D74687
Any OUTPUT_FORMAT in a linker script overrides the emulation passed on
the command line, so record the passed bfdname and use that in the error
message about incompatible input files.
This prevents confusing error messages. For example, if you explicitly
pass `-m elf_x86_64` to LLD but accidentally include a linker script
which sets `OUTPUT_FORMAT(elf32-i386)`, LLD would previously complain
about your input files being compatible with elf_x86_64, which isn't the
actual issue, and is confusing because the input files are in fact
x86-64 ELF files.
Interestingly enough, this also prevents a segfault! When we don't pass
`-m` and we have an object file which is incompatible with the
`OUTPUT_FORMAT` set by a linker script, the object file is checked for
compatibility before it's added to the objectFiles vector.
config->emulation, objectFiles, and sharedFiles will all be empty, so
we'll attempt to access bitcodeFiles[0], but bitcodeFiles is also empty,
so we'll segfault. This commit prevents the segfault by adding
OUTPUT_FORMAT as a possible source of machine configuration, and it also
adds an llvm_unreachable to diagnose similar issues in the future.
Differential Revision: https://reviews.llvm.org/D76109
```
createFiles(args)
readDefsym
readerLinkerScript(*mb)
...
readMemory
readMemoryAssignment("ORIGIN", "org", "o") // eagerly evaluated
target = getTarget();
link(args)
writeResult<ELFT>()
...
finalizeSections()
script->processSymbolAssignments()
addSymbol(cmd) // with this patch, evaluated here
```
readMemoryAssignment eagerly evaluates ORIGIN/LENGTH and returns an uint64_t.
This patch postpones the evaluation to make
* --defsym and symbol assignments
* `CONSTANT(COMMONPAGESIZE)` (requires a non-null `lld:🧝:target`)
work. If the expression somehow requires interaction with memory
regions, the circular dependency may cause the expression to evaluate to
a strange value. See the new test added to memory-err.s
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75763
D43468+D44380 added INSERT [AFTER|BEFORE] for non-orphan sections. This patch
makes INSERT work for orphan sections as well.
`SECTIONS {...} INSERT [AFTER|BEFORE] .foo` does not set `hasSectionCommands`, so the result
will be similar to a regular link without a linker script. The differences when `hasSectionCommands` is set include:
* image base is different
* -z noseparate-code/-z noseparate-loadable-segments are unavailable
* some special symbols such as `_end _etext _edata` are not defined
The behavior is similar to GNU ld:
INSERT is not considered an external linker script.
This feature makes the section layout more flexible. It can be used to:
* Place .nv_fatbin before other readonly SHT_PROGBITS sections to mitigate relocation overflows.
* Disturb the layout to expose address sensitive application bugs.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D74375
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
Linker scripts allow filenames to be put in double quotes to prevent
characters in filenames that are part of the linker script syntax from
having their special meaning. Case in point the * wildcard character.
Availability of double quoting filenames also allows to fix a failure in
ELF/linkerscript/filename-spec.s when the path contain a @ which the
lexer consider as a special characters and thus break up a filename
containing it. This may happens under Jenkins which createspath such as
pipeline@2.
To avoid the need for escaping GlobPattern metacharacters in filename
in double quotes, GlobPattern::create is augmented with a new parameter
to request literal matching instead of relying on the presence of a
wildcard character in the pattern.
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: peter.smith, grimar, ruiu, emaste, arichardson, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72517
The INPUT_SECTION_FLAGS linker script command is used to constrain the
section pattern matching to sections that match certain combinations of
flags.
There are two ways to express the constraint.
withFlags: Section must have these flags.
withoutFlags: Section must not have these flags.
The syntax of the command is:
INPUT_SECTION_FLAGS '(' sect_flag_list ')'
sect_flag_list: NAME
| sect_flag_list '&' NAME
Where NAME matches a section flag name such as SHF_EXECINSTR, or the
integer value of a section flag. If the first character of NAME is ! then
it means must not contain flag.
We do not support the rare case of { INPUT_SECTION_FLAGS(flags) filespec }
where filespec has no input section description like (.text).
As an example from the ld man page:
SECTIONS {
.text : { INPUT_SECTION_FLAGS (SHF_MERGE & SHF_STRINGS) *(.text) }
.text2 : { INPUT_SECTION_FLAGS (!SHF_WRITE) *(.text) }
}
.text will match sections called .text that have both the SHF_MERGE and
SHF_STRINGS flag.
.text2 will match sections called .text that don't have the SHF_WRITE flag.
The flag names accepted are the generic to all targets and SHF_ARM_PURECODE
as it is very useful to filter all the pure code sections into a single
program header that can be marked execute never.
fixes PR44265
Differential Revision: https://reviews.llvm.org/D72756
This makes it clear `ELF/**/*.cpp` files define things in the `lld::elf`
namespace and simplifies `elf::foo` to `foo`.
Reviewed By: atanasyan, grimar, ruiu
Differential Revision: https://reviews.llvm.org/D68323
llvm-svn: 373885
Summary:
ld.bfd produces an output with --noinhibit-exec when an ASSERT fails.
Use errorOrWarn() so that we can produce an output as well.
An interesting case is that symbol assignments may execute multiple
times, so we probably want to suppress errors for non-final runs.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D67285
llvm-svn: 371225
We prioritize non-* wildcards overs VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
This patch generalizes the rule to "*" of other versions and thus fixes PR40176.
I don't feel strongly about this GNU linkers' behavior but the
generalization simplifies code.
Delete `config->defaultSymbolVersion` which was used to special case
VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
In `SymbolTable::scanVersionScript`, custom versions are handled the same
way as VER_NDX_LOCAL/VER_NDX_GLOBAL. So merge
`config->versionScript{Locals,Globals}` into `config->versionDefinitions`.
Overall this seems to simplify the code.
In `SymbolTable::assign{Exact,Wildcard}Versions`,
`sym->verdefIndex == config->defaultSymbolVersion` is changed to
`verdefIndex == UINT32_C(-1)`.
This allows us to give duplicate assignment diagnostics for
`{ global: foo; };` `V1 { global: foo; };`
In test/linkerscript/version-script.s:
vs_index of an undefined symbol changes from 0 to 1. This doesn't matter (arguably 1 is better because the binding is STB_GLOBAL) because vs_index of an undefined symbol is ignored.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65716
llvm-svn: 367869
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
D64130 introduced a bug described in the following message:
https://reviews.llvm.org/D64130#1571560
The problem can happen with the following script:
SECTIONS {
.out : {
...
FILL(0x10101010)
*(.aaa)
...
}
The current code tries to read (0x10101010) as an expression and
does not break when meets *, what results in a script parsing error.
In this patch, I verify that FILL command's expression always wrapped in ().
And at the same time =<fillexp> expression can be both wrapped or unwrapped.
I checked it matches to bfd/gold.
Differential revision: https://reviews.llvm.org/D64476
llvm-svn: 365635
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
Some variables in lld have the same name as functions ignoring case.
This patch gives them different names, so that my next patch is easier
to read.
llvm-svn: 365003
Alexandre Ganea