[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Factor out the logic needed to update debug locations contained within
MD_loop metadata.
This refactor is preparation for a future change that also needs to
rewrite MD_loop metadata.
rdar://45507940
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
This revision is revised to update Go-bindings and Release Notes.
The original commit message follows.
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
llvm-svn: 360108
Summary:
Add accessors for the file, directory, source file name (curiously, an `Optional` value?), of a DIFile.
This is intended to replace the LLVMValueRef-based accessors used in D52239
Reviewers: whitequark, jberdine, deadalnix
Reviewed By: whitequark, jberdine
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60489
llvm-svn: 358577
Summary: Metadata for a global variable is really a (GlobalVariable, Expression) tuple. Allow access to these, then allow retrieving the file, scope, and line for a DIVariable, whether global or local. This should be the last of the accessors required for uniform access to location and file information metadata.
Reviewers: jberdine, whitequark, deadalnix
Reviewed By: jberdine, whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60725
llvm-svn: 358532
Summary: Provide direct accessors to supplement LLVMSetInstDebugLocation. In addition, properly accept and return the NULL location. The old accessors provided no way to do this, so the current debug location cannot currently be cleared.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60481
llvm-svn: 358038
Summary: The C API don't have the bindings to create enumerators, needed to create an enumeration.
Reviewers: whitequark, CodaFi, harlanhaskins, deadalnix
Reviewed By: whitequark, CodaFi, harlanhaskins
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58323
llvm-svn: 354237
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is to address post-commit feedback from Paul Robinson on r348954.
The original commit misinterprets count and upper bound as the same thing (I thought I saw GCC producing an upper bound the same as Clang's count, but GCC correctly produces an upper bound that's one less than the count (in C, that is, where arrays are zero indexed)).
I want to preserve the C-like output for the common case, so in the absence of a lower bound the count (or one greater than the upper bound) is rendered between []. In the trickier cases, where a lower bound is specified, a half-open range is used (eg: lower bound 1, count 2 would be "[1, 3)" and an unknown parts use a '?' (eg: "[1, ?)" or "[?, 7)" or "[?, ? + 3)").
Reviewers: aprantl, probinson, JDevlieghere
Differential Revision: https://reviews.llvm.org/D55721
llvm-svn: 349670
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
Summary:
Ranges base address specifiers can save a lot of object size in
relocation records especially in optimized builds.
For an optimized self-host build of Clang with split DWARF and debug
info compression in object files, but uncompressed debug info in the
executable, this change produces about 18% smaller object files and 6%
larger executable.
While it would've been nice to turn this on by default, gold's 32 bit
gdb-index support crashes on this input & I don't think there's any
perfect heuristic to implement solely in LLVM that would suffice - so
we'll need a flag one way or another (also possible people might want to
aggressively optimized for executable size that contains debug info
(even with compression this would still come at some cost to executable
size)) - so let's plumb it through.
Differential Revision: https://reviews.llvm.org/D54242
llvm-svn: 346788
Summary: Allows for retrieving the type of a metadata node. Has the added benefit of ensuring that the C and C++ kind APIs stay in sync as a failure to add a corresponding LLVMMetadataKind will result in the switch in the accessor being semantically malformed.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52693
llvm-svn: 343469
Summary: NameLen wasn't being used and caused the parameters in gdb to very long, in my case, crashes in others. Please also perform the correct magical incarnations to have this be applied to the LLVM 7 branch.
Reviewers: whitequark, CodaFi
Reviewed By: CodaFi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51141
llvm-svn: 340691
Fix a set of related bugs:
* Considering two locations as equivalent when their lines are the same
but their scopes are different causes erroneous debug info that
attributes a commoned call to be attributed to one of the two calls it
was commoned from.
* The previous code to compute a new location's scope was inaccurate and
would use the inlinedAt that was the /parent/ of the inlinedAt that is
the nearest common one, and also used that parent scope instead of the
nearest common scope.
* Not generating new locations generally seemed like a lower quality
choice
There was some risk that generating more new locations could hurt object
size by making more fine grained line table entries, but it looks like
that was offset by the decrease in line table (& address & ranges) size
caused by more accurately computing the scope - which likely lead to
fewer range entries (more contiguous ranges) & reduced size that way.
All up with these changes I saw minor reductions (-1.21%, -1.77%) in
.rela.debug_ranges and .rela.debug_addr (in a fission, compressed debug
info build) as well as other minor size changes (generally reductinos)
across the board (-1.32% debug_info.dwo, -1.28% debug_loc.dwo). Measured
in an optimized (-O2) build of the clang binary.
If you are investigating a size regression in an optimized debug builds,
this is certainly a patch to look into - and I'd be happy to look into
any major regressions found & see what we can do to address them.
llvm-svn: 340583
Added DIFlags in LLVMDIBuilderCreateBasicType to add optional DWARF
attributes, such as DW_AT_endianity.
Patch by Chirag Patel.
Differential Revision: https://reviews.llvm.org/D50832
llvm-svn: 340146
In cases where the debugger load time is a worthwhile tradeoff (or less
costly - such as loading from a DWP instead of a variety of DWOs
(possibly over a high-latency/distributed filesystem)) against object
file size, it can be reasonable to disable pubnames and corresponding
gdb-index creation in the linker.
A backend-flag version of this was implemented for NVPTX in
D44385/r327994 - which was fine for NVPTX which wouldn't mix-and-match
CUs. Now that it's going to be a user-facing option (likely powered by
"-gno-pubnames", the same as GCC) it should be encoded in the
DICompileUnit so it can vary per-CU.
After this, likely the NVPTX support should be migrated to the metadata
& the previous flag implementation should be removed.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D50213
llvm-svn: 339939
- Make eraseMetadata return whether it changed something
- Wire getMetadata for a single MDNode efficiently into the attachment
map
- Add hasMetadata, which is less weird than checking getMetadata ==
nullptr on a multimap.
Use it to simplify code.
llvm-svn: 333649
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
Summary:
- Adds getters for the line, column, and scope of a DILocation
- Adds getters for the name, size in bits, offset in bits, alignment in bits, line, and flags of a DIType
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46627
llvm-svn: 332014
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Summary:
* rL328953 does not include bindings for LLVMDIBuilderCreateClassType and LLVMDIBuilderCreateBitFieldMemberType despite declaring their prototypes. Provide these bindings now.
* Switch to more precise types with specific numeric limits matching the DIBuilder's C++ API.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46168
llvm-svn: 331114
Summary: Wrap LLVMDIBuilderCreateAutoVariable, LLVMDIBuilderCreateParameterVariable, LLVMDIBuilderCreateExpression, and move and correct LLVMDIBuilderInsertDeclareBefore and LLVMDIBuilderInsertDeclareAtEnd from the Go bindings to the C bindings.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: harlanhaskins, whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45928
llvm-svn: 330555
Apparently, DebugInfoFinder::processCompileUnit doesn't process all
of the possible kinds of DIImportedEntit'ies, e.g. DIGlobalVariable's.
Previously introduced `llvm_unreachable` is therefore incorrect.
Removing it here.
llvm-svn: 330167
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
This lifts a restriction on DILocation::getMergedLocation(), allowing it
to create merged locations for instructions other than calls.
Instruction::applyMergedLocation() now defaults to creating merged
locations for all instructions.
The default behavior of getMergedLocation() is unchanged: callers which
invoke it directly are unaffected.
This change will enable a follow-up Mem2Reg fix which improves crash
reporting.
Differential Revision: https://reviews.llvm.org/D45396
llvm-svn: 329955
Fangrui Song