Masked loads and store fit naturally with MVE, the instructions being easily
predicated. This adds lowering for the simple cases of masked loads and stores.
It does not yet deal with widening/narrowing or pre/post inc.
The llvm masked load intrinsic will accept a "passthru" value, dictating the
values used for the zero masked lanes. In MVE the instructions write 0 to the
zero predicated lanes, so we need to match a passthru that isn't 0 (or undef)
with a select instruction to pull in the correct data after the load.
We also need to do something with unaligned loads/stores. Currently this uses a
similar method used in big endian, using an VLDRB.8 (and potentially a VREV in
BE). This does mean that the predicate mask is converted from, for example, a
v4i1 to a v16i1. The VLDR instructions are defined as using the first bit of
the relevant mask lane, so this could potentially load different results if the
predicate is little odd. As the input is a v4i1 however, I believe this is OK
and all the bits required should be set in the predicate, making the VLDRB.8
load the same data.
Differential Revision: https://reviews.llvm.org/D66534
llvm-svn: 370329
This adds fp16 VMOVX patterns, using the same patterns as rL362482 with some
adjustments for MVE. It allows us to move fp16 registers without going into and
out of gprs.
VMOVX is able to move the top bits from a fp16 in a fp reg into the bottom bits
of another register, zeroing the rest. This can be used for odd MVE register
lanes. The top bits are not read by fp16 instructions, so no move is required
there if we are dealing with even lanes.
Differential revision: https://reviews.llvm.org/D66793
llvm-svn: 370184
The CodeGen/Thumb2/mve-vaddv.ll test needed to be amended to reflect the
changes from the above patch.
This reverts commit cd53ff6, reapplying 7c6b229.
llvm-svn: 369638
It broke the bots, see e.g. http://lab.llvm.org:8011/builders/clang-cuda-build/builds/36275/
> This patch fixes shifts by a 128/256 bit shift amount. It also fixes
> codegen for shifts of 32 by delegating to LLVM's default optimisation
> instead of emitting a long shift.
>
> Tests that used to generate long shifts of 32 are updated to check for the
> more optimised codegen.
>
> Differential revision: https://reviews.llvm.org/D66519
>
> llvm-svn: 369626
llvm-svn: 369636
This patch fixes shifts by a 128/256 bit shift amount. It also fixes
codegen for shifts of 32 by delegating to LLVM's default optimisation
instead of emitting a long shift.
Tests that used to generate long shifts of 32 are updated to check for the
more optimised codegen.
Differential revision: https://reviews.llvm.org/D66519
llvm-svn: 369626
This patch adds vecreduce_add and the relevant instruction selection for
vaddv.
Differential revision: https://reviews.llvm.org/D66085
llvm-svn: 369245
The widening and narrowing MVE instructions like VLDRH.32 are only permitted to
use low tGPR registers. This means that if they are used for a stack slot,
where the register used is only decided during frame setup, we need to be able
to correctly pick a thumb1 register over a normal GPR.
This attempts to add the required logic into eliminateFrameIndex and
rewriteT2FrameIndex, only picking the FrameReg if it is a valid register for
the operands register class, and picking a valid scratch register for the
register class.
Differential Revision: https://reviews.llvm.org/D66285
llvm-svn: 369108
Two issues:
1. t2CMPri shouldn't use CPSR if it isn't predicated. This doesn't
really have any visible effect at the moment, but it might matter in the
future.
2. The t2CMPri generated for t2WhileLoopStart might need to use a
register that isn't LR.
My team found this because we have a patch to track register liveness
late in the pass pipeline. I'll look into upstreaming it to help catch
issues like this earlier.
Differential Revision: https://reviews.llvm.org/D66243
llvm-svn: 369069
We need to allow any alignment at least 2, not just exactly 2, so that the big
endian loads and stores can be selected successfully. I've also added extra BE
testing for the load and store tests.
Thanks to Oliver for the report.
Differential Revision: https://reviews.llvm.org/D66222
llvm-svn: 368996
Stack loads and stores were already working, but direct stores were not. This
adds the patterns for them, same as predicate loads.
Differential Revision: https://reviews.llvm.org/D66213
llvm-svn: 368988
This adds patterns for selecting trunc instructions from full vectors to i1's
vectors.
Differential Revision: https://reviews.llvm.org/D66201
llvm-svn: 368981
This adds pre- and post- increment and decrements for MVE loads and stores. It
uses the builtin pre and post load/store detection, unlike Neon. Loads are
selected with the code in tryT2IndexedLoad, stores are selected with tablegen
patterns. The immediates have a +/-7bit range, multiplied by the size of the
element.
Differential Revision: https://reviews.llvm.org/D63840
llvm-svn: 368305
This adds some missing patterns for big endian loads/stores, allowing unaligned
loads/stores to also be selected with an extra VREV, which produces better code
than aligning through a stack. Also moves VLDR_P0 to not be LE only, and
adjusts some of the tests to show all that working.
Differential Revision: https://reviews.llvm.org/D65583
llvm-svn: 368304
VLDRH needs to have an alignment of at least 2, including the
widening/narrowing versions. This tightens up the ISel patterns for it and
alters allowsMisalignedMemoryAccesses so that unaligned accesses are expanded
through the stack. It also fixed some incorrect shift amounts, which seemed to
be passing a multiple not a shift.
Differential Revision: https://reviews.llvm.org/D65580
llvm-svn: 368256
This adjusts the load/store tests for better testing of alignments. It also
adds some extra alignment 1 tests, useful for future commits.
llvm-svn: 368255
Currently we check whether LR is stored/loaded to/from inbetween the
loop decrement and loop end pseudo instructions. There's two problems
here:
- It relies on all load/store instructions being labelled as such in
tablegen.
- Actually any use of loop decrement is troublesome because the value
doesn't exist!
So we need to check for any read/write of LR that occurs between the
two instructions and revert if we find anything.
Differential Revision: https://reviews.llvm.org/D65792
llvm-svn: 368130
This adds big endian MVE patterns for bitcasts. They are defined in llvm as
being the same as a store of the existing type and the load into the new. This
means that they have to become a VREV between the two types, working in the
same way that NEON works in big-endian. This also adds some example tests for
bigendian, showing where code is and isn't different.
The main difference, especially from a testing perspective is that vectors are
passed as v2f64, and so are VREV into and out of call arguments, and the
parameters are passed in a v2f64 format. Same happens for inline assembly where
the register class is used, so it is VREV to a v16i8.
So some of this is probably not correct yet, but it is (mostly) self-consistent
and seems to be consistent with how llvm treats vectors. The rest we can
hopefully fix later. More details about big endian neon can be found in
https://llvm.org/docs/BigEndianNEON.html.
Differential Revision: https://reviews.llvm.org/D65581
llvm-svn: 367780
The VREV64 instruction is apparently unpredictable if Qd == Qm, due to the
cross-beat nature of the instruction. This adds an earlyclobber to Qd, which
seems to be the same way we deal with this on other instructions like the
write-back on loads and stores.
Differential Revision: https://reviews.llvm.org/D65502
llvm-svn: 367544
Revert the hardware loop upon finding a LoopEnd that doesn't target
the loop header, instead of asserting a failure.
Differential Revision: https://reviews.llvm.org/D65268
llvm-svn: 367296
This adds the patterns required to transform xor P0, -1 to a VPNOT. The
instruction operands have to change a little for this, adding an in and an out
VCCR reg and using a custom DecodeMVEVPNOT for the decode.
Differential Revision: https://reviews.llvm.org/D65133
llvm-svn: 367192
These are some better patterns for converting between predicates and floating
points. Much like the extends, we select "1"/"-1" or "0" depending on the
predicate value. Or we perform a compare against 0 to convert to a predicate.
Differential Revision: https://reviews.llvm.org/D65103
llvm-svn: 367191
Both WhileLoopStart and LoopEnd may get turned into a cmp and br pair,
so add an implicit def to these pseudo instructions in case that WLS
and LE aren't generated.
Differential Revision: https://reviews.llvm.org/D65275
llvm-svn: 367089
This removes the VCEQ/VCNE/VCGE/VCEQZ/etc nodes, just using two called VCMP and
VCMPZ with an extra operand as the condition code. I believe this will make
some combines simpler, allowing us to just look at these codes and not the
operands. It also helps fill in a missing VCGTUZ MVE selection without adding
extra nodes for it.
Differential Revision: https://reviews.llvm.org/D65072
llvm-svn: 366934
The prevents us from trying to convert an i1 predicate vector to a float, or
vice-versa. Better patterns are possible, which will follow in a subsequent
commit. For now we just expand them.
Differential Revision: https://reviews.llvm.org/D65066
llvm-svn: 366931
MVE VCMP instructions can use a general purpose register as the second operand.
This adds the combines for it, selecting from a compare of a vdup.
Differential Revision: https://reviews.llvm.org/D65061
llvm-svn: 366924
This adds a DeMorgan combine for OR's of compares to turn them into AND's,
helping prevent them from going into and out of gpr registers. It also fills in
the VCLE and VCLT nodes that MVE can select, allowing it to invert more
compares.
Differential Revision: https://reviews.llvm.org/D65059
llvm-svn: 366920
Add a number of folds to convert and(vcmp, vcmp) into a single VPT block, where
the second vcmp becomes predicated on the first.
The VCMP; VPST; VCMP will eventually be converted to VPT; VCMP in the
VPTBlockPass.
Differential Revision: https://reviews.llvm.org/D65058
llvm-svn: 366910
Much like integers, this adds MVE floating point compares and select. It
requires a lot more buildvector/shuffle code because we may need to expand the
compares without mve.fp, and requires support for and/or because of the way we
lower llvm condition codes.
Some original code by David Sherwood
Differential Revision: https://reviews.llvm.org/D65054
llvm-svn: 366909
This adds some basic, "worst case" handling for MVE predicate Or/And/Xor. It
does this by going into and out of GPRs, doing the operation on scalars.
Code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65053
llvm-svn: 366907
This adds support code for building and shuffling i1 predicate registers. It
generally uses two basic principles, either converting the predicate into an
scalar (through a PREDICATE_CAST) and doing scalar operations on it there, or
by converting the register to an full vector register and back.
Some of the code here is a not super efficient but will hopefully cover most
cases of moving i1 vectors around and can be improved in subsequent patches.
Some code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65052
llvm-svn: 366890
This adds the very basics for MVE vector predication, adding integer VCMP and
VSEL instruction support. This is done through predicate registers (MVT::v16i1,
MVT::v8i1, MVT::v4i1), but otherwise using same mechanics as NEON to custom
lower setcc's through ARMISD::VCXX nodes (VCEQ, VCGT, VCEQZ, etc).
An extra VCNE was added, as this can be handled sensibly by MVE's expanded
number of VCMP condition codes. (There are also VCLE and VCLT which are added
later).
VPSEL is also added here, simply selecting on the vselect.
Original code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65051
llvm-svn: 366885
While lowering test.set.loop.iterations, it wasn't checked how the
brcond was using the result and so the wls could branch to the loop
preheader instead of not entering it. The same was true for
loop.decrement.reg.
So brcond and br_cc and now lowered manually when using the hwloop
intrinsics. During this we now check whether the result has been
negated and whether we're using SETEQ or SETNE and 0 or 1. We can
then figure out which basic block the WLS and LE should be targeting.
Differential Revision: https://reviews.llvm.org/D64616
llvm-svn: 366809
ARMLowOverheadLoops would assert a failure if it did not find all the
pseudo instructions that comprise the hardware loop. Instead of doing
this, iterate through all the instructions of the function and revert
any remaining pseudo instructions that haven't been converted.
Differential Revision: https://reviews.llvm.org/D65080
llvm-svn: 366691
We need to ensure that the number of T's is correct when adding multiple
instructions into the same VPT block.
Differential revision: https://reviews.llvm.org/D65049
llvm-svn: 366684
We need to make sure that we are sensibly dealing with vectors of types v2i64
and v2f64, even if most of the time we cannot generate native operations for
them. This mostly adds a lot of testing, plus fixes up a couple of the issues
found. And, or and xor can be legal for v2i64, and shifts combining needs a
slight fixup.
Differential Revision: https://reviews.llvm.org/D64316
llvm-svn: 366106
This adds basic lowering for MVE shifts. There are many shifts in MVE, but the
instructions handled here are:
VSHL (imm)
VSHRu (imm)
VSHRs (imm)
VSHL (vector)
VSHL (register)
MVE, like NEON before it, doesn't have shift right by a vector (or register).
We instead have to negate the amount and shift in the opposite direction. This
means we have to convert any SHR's into a form of SHL (that is still signed or
unsigned) with a negated condition and selecting from there. MVE still does
have shifting by an immediate for SHL, ASR and LSR.
This adds lowering for these and for register forms, which work well for shift
lefts but may require an extra fold of neg(vdup(x)) -> vdup(neg(x)) to potentially
work optimally for right shifts.
Differential Revision: https://reviews.llvm.org/D64212
llvm-svn: 366056
The vmovlb instructions can be uses to sign or zero extend vector registers
between types. This adds some patterns for them and relevant testing. The
VBICIMM generation is also put behind a hasNEON check (as is already done for
VORRIMM).
Code originally by David Sherwood.
Differential Revision: https://reviews.llvm.org/D64069
llvm-svn: 366008
This selects integer VNEG instructions, which can be especially useful with shifts.
Differential Revision: https://reviews.llvm.org/D64204
llvm-svn: 366006
This simply makes the MVE integer min and max instructions legal and adds the
relevant patterns for them.
Differential Revision: https://reviews.llvm.org/D64026
llvm-svn: 366004
David Green