result variable on a "finish" statement. The
ownership of the result value was not being properly
assigned to the newly-created persistent result
variable; now it is.
llvm-svn: 147587
Switch from GetReturnValue, which was hardly ever used, to GetReturnValueObject
which is much more convenient.
Return the "return value object" as a persistent variable if requested.
llvm-svn: 147157
parser has hitherto been an implementation waiting
for a use. I have now tied the '-o' option for
the expression command -- which indicates that the
result is an Objective-C object and needs to be
printed -- to the ExpressionParser, which
communicates the desired type to Clang.
Now, if the result of an expression is determined
by an Objective-C method call for which there is
no type information, that result is implicitly
cast to id if and only if the -o option is passed
to the expression command. (Otherwise if there
is no explicit cast Clang will issue an error.
This behavior is identical to what happened before
r146756.)
Also added a testcase for -o enabled and disabled.
llvm-svn: 147099
as part of the thread format output.
Currently this is only done for the ThreadPlanStepOut.
Add a convenience API ABI::GetReturnValueObject.
Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than
trying to hand out one of its subsidiary object's pointers. That way this will always
be good.
llvm-svn: 146806
size_t
SBProcess::ReadCStringFromMemory (addr_t addr, void *buf, size_t size, lldb::SBError &error);
uint64_t
SBProcess::ReadUnsignedFromMemory (addr_t addr, uint32_t byte_size, lldb::SBError &error);
lldb::addr_t
SBProcess::ReadPointerFromMemory (addr_t addr, lldb::SBError &error);
These ReadCStringFromMemory() has some SWIG type magic that makes it return the
python string directly and the "buf" is not needed:
error = SBError()
max_cstr_len = 256
cstr = lldb.process.ReadCStringFromMemory (0x1000, max_cstr_len, error)
if error.Success():
....
The other two functions behave as expteced. This will make it easier to get integer values
from the inferior process that are correctly byte swapped. Also for pointers, the correct
pointer byte size will be used.
Also cleaned up a few printf style warnings for the 32 bit lldb build on darwin.
llvm-svn: 146636
There were two problems associated with this radar:
1. "settings show target.source-map" failed to show the source-map after, for example,
"settings set target.source-map /Volumes/data/lldb/svn/trunk/test/source-manager /Volumes/data/lldb/svn/trunk/test/source-manager/hidden"
has been executed to set the source-map.
2. "list -n main" failed to display the source of the main() function after we properly set the source-map.
The first was fixed by adding the missing functionality to TargetInstanceSettings::GetInstanceSettingsValue (Target.cpp)
and updating the support files PathMappingList.h/.cpp; the second by modifying SourceManager.cpp to fix several places
with incorrect logic.
Also added a test case test_move_and_then_display_source() to TestSourceManager.py, which moves main.c to hidden/main.c,
sets target.source-map to perform the directory mapping, and then verifies that "list -n main" can still show the main()
function.
llvm-svn: 146422
that got hit, and first check the condition, and if that location's condition says we should stop, then we
run the callback. In the end if any location's condition and callback say we should stop, then we stop.
llvm-svn: 146242
take a SymbolFile reference and a lldb::user_id_t and be used in objects
which represent things in debug symbols that have types where we don't need
to know the true type yet, such as in lldb_private::Variable objects. This
allows us to defer resolving the type until something is used. More specifically
this allows us to get 1000 local variables from the current function, and if
the user types "frame variable argc", we end up _only_ resolving the type for
"argc" and not for the 999 other local variables. We can expand the use of this
as needed in the future.
Modified the DWARFMappedHash class to be able to read the HashData that has
more than just the DIE offset. It currently will read the atoms in the header
definition and read the data correctly. Currently only the DIE offset and
type flags are supported. This is needed for adding type flags to the
.apple_types hash accelerator tables.
Fixed a assertion crash that would happen if we have a variable that had a
DW_AT_const_value instead of a location where "location.LocationContains_DW_OP_addr()"
would end up asserting when it tried to parse the variable location as a
DWARF opcode list.
Decreased the amount of memory that LLDB would use when evaluating an expression
by 3x - 4x for clang. There was a place in the namespace lookup code that was
parsing all namespaces with a certain name in a DWARF file instead of stopping
when it found the first match. This was causing all of the compile units with
a matching namespace to get parsed into memory and causing unnecessary memory
bloat.
Improved "Target::EvaluateExpression(...)" to not try and find a variable
when the expression contains characters that would certainly cause an expression
to need to be evaluated by the debugger.
llvm-svn: 146130
the function it is being asked to step through, so that even if we get the trampoline
target wrong (for instance) we will still not lose control.
The other fix here is to tighten up the handling of the case where the current plan
doesn't explain the stop, but a plan above us does. In that case, if the plan that
does explain the stop says it is done, we need to clean up the plans below it and
continue on with our processing.
llvm-svn: 145740
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.
llvm-svn: 145644
ClangASTSource::~ClangASTSource() was calling
ClangASTContext *scratch_clang_ast_context = m_target->GetScratchClangASTContext();
which had the side effect of deleting this very ClangASTSource instance. Not good.
Change it to
// We are in the process of destruction, don't create clang ast context on demand
// by passing false to Target::GetScratchClangASTContext(create_on_demand).
ClangASTContext *scratch_clang_ast_context = m_target->GetScratchClangASTContext(false);
The Target::GetScratchClangASTContext(bool create_on_demand=true) has a new signature.
llvm-svn: 145537
something like "display/4i $pc" (or something like this). With LLDB we already
were showing 3 lines of source before and 3 lines of source after the current
source line when showing a stop context. We now improve this by allowing the
user to control the number of lines with the new "stop-line-count-before" and
"stop-line-count-after" settings. Also, there is a new setting for how many
disassembly lines to show: "stop-disassembly-count". This will control how many
source lines are shown when there is no source or when we have no source line
info.
settings set stop-line-count-before 3
settings set stop-line-count-after 3
settings set stop-disassembly-count 4
settings set stop-disassembly-display no-source
The default values are set as shown above and allow 3 lines of source before
and after (what we used to do) the current stop location, and will display 4
lines of disassembly if the source is not available or if we have no debug
info. If both "stop-source-context-before" and "stop-source-context-after" are
set to zero, this will disable showing any source when stopped. The
"stop-disassembly-display" setting is an enumeration that allows you to control
when to display disassembly. It has 3 possible values:
"never" - never show disassembly no matter what
"no-source" - only show disassembly when there is no source line info or the source files are missing
"always" - always show disassembly.
llvm-svn: 145050
we say that the vectors of DWARFDebugInfoEntry objects were the highest on the
the list.
With these changes we cut our memory usage by 40%!!! I did this by reducing
the size of the DWARFDebugInfoEntry from a previous:
uint32_t offset
uint32_t parent_idx
uint32_t sibling_idx
Abbrev * abbrev_ptr
which was 20 bytes, but rounded up to 24 bytes due to alignment. Now we have:
uint32_t offset
uint32_t parent_idx
uint32_t sibling_idx
uint32_t abbr_idx:15, // 32767 possible abbreviation codes
has_children:1, // 0 = no children, 1 = has children
tag:16; // DW_TAG_XXX value
This gets us down to 16 bytes per DIE. I tested some VERY large DWARF files
(900MB) and found there were only ~700 unique abbreviations, so 32767 should
be enough for any sane compiler. If it isn't there are built in assertions
that will fire off and tell us.
llvm-svn: 144975
turned out to be unitialized data in the ProcessLaunchInfo default constructor.
Turning on MallocScribble in the environment helped track this down.
When we launch and attach using the host layer, we now inform the process that
it shouldn't detach when by calling an accessor.
llvm-svn: 144882
the thread specific data and were destroying the thread specfic data more
than once.
Also added the ability to ask a lldb::StateType if it is stopped with an
additional paramter of "must_exist" which means that the state must be a
stopped state for a process that still exists. This means that eStateExited
and eStateUnloaded will no longer return true if "must_exist" is set to true.
llvm-svn: 144875
rather than individually on behalf of each
ASTContext. This allows the ASTImporter to know
about all containers of types, which will let it
be smarter about forwarding information about
type origins. That means that the following
sequence of steps will be possible (after a few
more changes):
- Import a type from a Module's ASTContext into
an expression parser ASTContext, tracking its
origin information -- this works now.
- Because the result of the expression uses that
type, import it from the expression parser
ASTContext into the Target's scratch AST
context, forwarding the origin information --
this needs to be added.
- For a later expression that uses the result,
import the type from the Target's scratch AST
context, still forwarding origin information
-- this also needs to be added.
- Use the intact origin information to complete
the type as needed -- this works now if the
origin information is present.
To this end, I made the following changes:
- ASTImporter top-level copy functions now
require both a source and a destination AST
context parameter.
- The ASTImporter now knows how to purge
records related to an ASTContext that is
going away.
- The Target now owns and creates the ASTImporter
whenever the main executable changes or (in the
absence of a main executable) on demand.
llvm-svn: 144802
After recent changes we weren't reaping child processes resulting in many
zombie processes.
This was fixed by adding more settings to the ProcessLaunchOptions class
that allow clients to specify a callback function and baton to be notified
when their process dies. If one is not supplied a default callback will be
used that "does the right thing".
Cleaned up a race condition in the ProcessGDBRemote class that would attempt
to monitor when debugserver died.
Added an extra boolean to the process monitor callbacks that indicate if a
process exited or not. If your process exited with a zero exit status and no
signal, both items could be zero.
Modified the process monitor functions to not require a callback function
in order to reap the child process.
llvm-svn: 144780
NULL-terminated C string to store the contents
of the expression prefix file. This meant that
expressions, when printing the contents of the
prefix into the expression's text, would
invariably put in bad data after the end of the
expression.
Now, instead, we store the prefix contents in a
std::string, which handles null-termination
correctly.
llvm-svn: 144760
info for us to attach by pid, or by name and will also allow us to eventually
do a lot more powerful attaches. If you look at the options for the "platform
process list" command, there are many options which we should be able to
specify. This will allow us to do things like "attach to a process named 'tcsh'
that has a parent process ID of 123", or "attach to a process named 'x' which
has an effective user ID of 345".
I finished up the --shell implementation so that it can be used without the
--tty option in "process launch". The "--shell" option now can take an
optional argument which is the path to the shell to use (or a partial name
like "sh" which we will find using the current PATH environment variable).
Modified the Process::Attach to use the new ProcessAttachInfo as the sole
argument and centralized a lot of code that was in the "process attach"
Execute function so that everyone can take advantage of the powerful new
attach functionality.
llvm-svn: 144615
the --tty option. So you can now get shell expansion and file redirection:
(lldb) process launch --tty --shell -- *.jpg < in.txt > out.txt
Again, the "--tty" is mandatory for now until we hook this up to other
functions. The shell is also currently hard coded to "/bin/bash" and not the
"SHELL" variable. "/bin/tcsh" was causing problems which I need to dig into.
llvm-svn: 144443
be in the target. All of the environment, args, stdin/out/err files, etc have
all been moved. Also re-enabled the ability to launch a process in a separate
terminal on MacOSX.
llvm-svn: 144061
which will in the future allow expressions to be
compiled as C, C++, and Objective-C instead of the
current default Objective-C++. This feature requires
some additional support from Clang -- specifically, it
requires reference types in the parser regardless of
language -- so it is not yet exposed to the user.
llvm-svn: 144042
- If you download and build the sources in the Xcode project, x86_64 builds
by default using the "llvm.zip" checkpointed LLVM.
- If you delete the "lldb/llvm.zip" and the "lldb/llvm" folder, and build the
Xcode project will download the right LLVM sources and build them from
scratch
- If you have a "lldb/llvm" folder already that contains a "lldb/llvm/lib"
directory, we will use the sources you have placed in the LLDB directory.
Python can now be disabled for platforms that don't support it.
Changed the way the libllvmclang.a files get used. They now all get built into
arch specific directories and never get merged into universal binaries as this
was causing issues where you would have to go and delete the file if you wanted
to build an extra architecture slice.
llvm-svn: 143678
on internal only (public API hasn't changed) to simplify the paramter list
to the launch calls down into just one argument. Also all of the argument,
envronment and stdio things are now handled in a much more centralized fashion.
llvm-svn: 143656
"object borked"... Also made the error when the checker fails reflect this fact rather than
report a crash at 0x0.
Also a little cleanup:
- StopInfoMachException had a redundant copy of the description string.
- ThreadPlanCallFunction had a redundant copy of the thread, and had a
copy of the process that it didn't really need.
llvm-svn: 143419
lldb_private::Error objects the rules are:
- short strings that don't start with a capitol letter unless the name is a
class or anything else that is always capitolized
- no trailing newline character
- should be one line if possible
Implemented a first pass at adding "--gdb-format" support to anything that
accepts format with optional size/count.
llvm-svn: 142999
command in the '- Hook id' header. This should improve readbility of the 'display'
command if, for example, we have issued 'display a' and 'display b' which turn into
"target stop-hook add -o 'expr -- a'" and "target stop-hook add -o 'expr -- b'".
Plus some minor change in TestAbbreviations.py to conditionalize the platform-specific
checkings of the "image list" output.
llvm-svn: 142868
process IDs, and thread IDs, but was mainly needed for for the UserID's for
Types so that DWARF with debug map can work flawlessly. With DWARF in .o files
the type ID was the DIE offset in the DWARF for the .o file which is not
unique across all .o files, so now the SymbolFileDWARFDebugMap class will
make the .o file index part (the high 32 bits) of the unique type identifier
so it can uniquely identify the types.
llvm-svn: 142534
so we don't have to lookup types in a type list by ID.
Changed the DWARF parser to remove the "can externally complete myself" bits
from the type when we are in the process of completing the type itself to
avoid an onslaught of external visible decl requests from the
clang::ExternalASTSource.
llvm-svn: 142461
watchpoint modify -c 'global==5'
modifies the last created watchpoint so that the condition expression
is evaluated at the stop point to decide whether we should proceed with
the stopping.
Also add SBWatchpont::SetCondition(const char *condition) to set condition
programmatically.
Test cases to come later.
llvm-svn: 142227
a watchpoint for either the variable encapsulated by SBValue (Watch) or the pointee
encapsulated by SBValue (WatchPointee).
Removed SBFrame::WatchValue() and SBFrame::WatchLocation() API as a result of that.
Modified the watchpoint related test suite to reflect the change.
Plus replacing WatchpointLocation with Watchpoint throughout the code base.
There are still cleanups to be dome. This patch passes the whole test suite.
Check it in so that we aggressively catch regressions.
llvm-svn: 141925
SymbolFIle (it was done mostly in the BreakpointResolverName resolver before.) Then
tailor our searches to the way the indexed maps are laid out. This removes a bunch
of test case failures using indexed dSYM's.
llvm-svn: 141428
Sean Callanan