Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction
execution and enter an implementation-dependent optimized state until
occurrence of a class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper
Subscribers: RKSimon, joker.eph, llvm-commits, cfe-commits
Differential Revision: http://reviews.llvm.org/D19796
llvm-svn: 269907
licensees actually see in the toolchain we deliver to them. This will
reduce the set of local patches we have to maintain. The triple is
not changing. (The term ORBIS is an internal code name for PS4.)
llvm-svn: 269671
Add supported OpenCL extensions to target info. It serves as default values to save the users of the burden setting each supported extensions and optional core features in command line.
Re-commit after fixing build error due to missing override attribute.
Differential Revision: http://reviews.llvm.org/D19484
llvm-svn: 269670
Embedded ARM MachO targets are AAPCS but not full EABI (we don't use
__aeabi_whatever and the functions are allowed to be hard-float).
Turns out there was already a test for this, but its original purpose had
become corrupted over the years.
llvm-svn: 269487
Revert r269431 due to build failure caused by warning msg:
llvm/tools/clang/lib/Basic/Targets.cpp:2090:9: error: 'setSupportedOpenCLOpts' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
void setSupportedOpenCLOpts() {
llvm-svn: 269435
Add supported OpenCL extensions to target info. It serves as default values to save the users of the burden setting each supported extensions and optional core features in command line.
Differential Revision: http://reviews.llvm.org/D19484
llvm-svn: 269431
Reapply r269100 and r269270, reverted due to
https://llvm.org/bugs/show_bug.cgi?id=27725. Isolate the testcase that
corresponds to the new feature side of this commit and skip it on
windows hosts until we find why it does not work on these platforms.
Original commit message:
The way we currently build the internal VFS overlay representation leads
to inefficient path search and might yield wrong answers when asked for
recursive or regular directory iteration.
Currently, when reading an YAML file, each YAML root entry is placed
inside a new root in the filesystem overlay. In the crash reproducer, a
simple "@import Foundation" currently maps to 43 roots, and when looking
up paths, we traverse a directory tree for each of these different
roots, until we find a match (or don't). This has two consequences:
- It's slow.
- Directory iteration gives incomplete results since it only return
results within one root - since contents of the same directory can be
declared inside different roots, the result isn't accurate.
This is in part fault of the way we currently write out the YAML file
when emitting the crash reproducer - we could generate only one root and
that would make it fast and correct again. However, we should not rely
on how the client writes the YAML, but provide a good internal
representation regardless.
Build a proper virtual directory tree out of the YAML representation,
allowing faster search and proper iteration. Besides the crash
reproducer, this potentially benefits other VFS clients.
llvm-svn: 269327
The way we currently build the internal VFS overlay representation leads
to inefficient path search and might yield wrong answers when asked for
recursive or regular directory iteration.
Currently, when reading an YAML file, each YAML root entry is placed
inside a new root in the filesystem overlay. In the crash reproducer, a
simple "@import Foundation" currently maps to 43 roots, and when looking
up paths, we traverse a directory tree for each of these different
roots, until we find a match (or don't). This has two consequences:
- It's slow.
- Directory iteration gives incomplete results since it only return
results within one root - since contents of the same directory can be
declared inside different roots, the result isn't accurate.
This is in part fault of the way we currently write out the YAML file
when emitting the crash reproducer - we could generate only one root and
that would make it fast and correct again. However, we should not rely
on how the client writes the YAML, but provide a good internal
representation regardless.
This patch builds a proper virtual directory tree out of the YAML
representation, allowing faster search and proper iteration. Besides the
crash reproducer, this potentially benefits other VFS clients.
llvm-svn: 269270
[ Copied from https://llvm.org/bugs/show_bug.cgi?id=26404 ]
clang support on Haiku is lagging a bit, and missing on x86_64.
This patch updates support for x86 and add support for x86_64. It should
apply directly to trunk and it's harmless in the sense that it only
affects Haiku.
Reviewers: rnk, rsmith
Patch by Jérôme Duval
Differential Revision: http://reviews.llvm.org/D16797
llvm-svn: 269201
Bruno made a couple valiant attempts but the bot is still red.
This reverts r269100 (primary commit), r269108 (fix attempt), r269133
(fix attempt).
llvm-svn: 269160
The way we currently build the internal VFS overlay representation leads
to inefficient path search and might yield wrong answers when asked for
recursive or regular directory iteration.
Currently, when reading an YAML file, each YAML root entry is placed
inside a new root in the filesystem overlay. In the crash reproducer, a
simple "@import Foundation" currently maps to 43 roots, and when looking
up paths, we traverse a directory tree for each of these different
roots, until we find a match (or don't). This has two consequences:
- It's slow.
- Directory iteration gives incomplete results since it only return
results within one root - since contents of the same directory can be
declared inside different roots, the result isn't accurate.
This is in part fault of the way we currently write out the YAML file
when emitting the crash reproducer - we could generate only one root and
that would make it fast and correct again. However, we should not rely
on how the client writes the YAML, but provide a good internal
representation regardless.
This patch builds a proper virtual directory tree out of the YAML
representation, allowing faster search and proper iteration. Besides the
crash reproducer, this potentially benefits other VFS clients.
llvm-svn: 269100
This patch corresponds to review:
http://reviews.llvm.org/D19684
It simply adds the handling for the option and the corresponding macros.
llvm-svn: 268951
This patch corresponds to reviews:
http://reviews.llvm.org/D15120http://reviews.llvm.org/D19125
It adds support for the __float128 keyword, literals and target feature to
enable it. Based on the latter of the two aforementioned reviews, this feature
is enabled on Linux on i386/X86 as well as SystemZ.
This is also the second attempt in commiting this feature. The first attempt
did not enable it on required platforms which caused failures when compiling
type_traits with -std=gnu++11.
If you see failures with compiling this header on your platform after this
commit, it is likely that your platform needs to have this feature enabled.
llvm-svn: 268898
This code implements builtin_setjmp and builtin_longjmp exception handling intrinsics for 32-bit Sparc back-ends.
The code started as a mash-up of the PowerPC and X86 versions, although there are sufficient differences to both that had to be made for Sparc handling.
Note: I have manual tests running. I'll work on a unit test and add that to the rest of this diff in the next day.
Also, this implementation is only for 32-bit Sparc. I haven't focussed on a 64-bit version, although I have left the code in a prepared state for implementing this, including detecting pointer size and comments indicating where I suspect there may be differences.
Differential Revision: http://reviews.llvm.org/D19798
llvm-svn: 268483
The -malign-double flag causes i64 and f64 types to have alignment 8
instead of 4. On x86-64, the behavior of -malign-double is enabled by default.
Rebases and cleans phosek's work here: http://reviews.llvm.org/D12860
Patch by Sean Klein
Reviewers: rnk
Subscribers: rnk, jfb, dschuff, phosek
Differential Revision: http://reviews.llvm.org/D19734
llvm-svn: 268473
Summary:
Host and device types must match, otherwise when we pass values back and
forth between the host and device, we will get the wrong result.
This patch makes NVPTXTargetInfo inherit most of its type information
from the host's target info.
Reviewers: rsmith
Subscribers: cfe-commits, jhen, tra
Differential Revision: http://reviews.llvm.org/D19346
llvm-svn: 268131
Summary: The Darwin armv7k ABI uses Dwarf EH, so we need to set the OS define correctly. Without this the gcc_personality fails to build.
Reviewers: t.p.northover
Subscribers: aemerson, cfe-commits, rengolin
Differential Revision: http://reviews.llvm.org/D19693
llvm-svn: 268078
It's a little debateable because we're not truly AAPCS, so I'm
certainly not going to define __ARM_PCS, but __ARM_PCS_VFP seems to be
really an "hard-float" define, which is a useful thing to have.
llvm-svn: 267880
Summary:
Port rL265324 to SystemZ to allow using the 'swiftcall' attribute on that architecture.
Depends on D19414.
Reviewers: kbarton, rjmccall, uweigand
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D19432
llvm-svn: 267879
Summary:
According to the ACLE spec, "__ARM_FEATURE_FMA is defined to 1 if
the hardware floating-point architecture supports fused floating-point
multiply-accumulate".
This changes clang's behaviour from emitting this macro for v7-A and v7-R
cores to only emitting it when the target has VFPv4 (and therefore support
for the floating point multiply-accumulate instruction).
Fixes PR27216
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, rengolin, cfe-commits
Differential Revision: http://reviews.llvm.org/D18963
llvm-svn: 267869
Since this patch provided support for the __float128 type but disabled it
on all platforms by default, some platforms can't compile type_traits with
-std=gnu++11 since there is a specialization with __float128.
This reverts the patch until D19125 is approved (i.e. we know which platforms
need this support enabled).
llvm-svn: 266460
Hide the real paths when rebuilding from VFS by setting up the crash
reproducer to use 'use-external-names' = false. This way we avoid
module redifinition errors and consistently use the same paths against
all modules.
With this change on Darwin we are able to simulate a crash for a simple
application using "Foundation/Foundation.h" (which relies on a bunch of
different frameworks and headers) and successfully rebuild all the
modules by relying solely at the VFS overlay.
llvm-svn: 266234
This patch corresponds to review:
http://reviews.llvm.org/D15120
It adds support for the __float128 keyword, literals and a target feature to
enable it. This support is disabled by default on all targets and any target
that has support for this type is free to add it.
Based on feedback that I've received from target maintainers, this appears to
be the right thing for most targets. I have not heard from the maintainers of
X86 which I believe supports this type. I will subsequently investigate the
impact of enabling this on X86.
llvm-svn: 266186
addAncestorsAsVirtualDirs("<stdin>") quickly returns without doing work
because "<stdin>" has no parent_path. This violates the expectation
that a subsequent call to getDirectoryFromFile("<stdin>") would succeed.
Instead, it fails because it uses the "." if the file has no path
component.
Fix this by keeping the behavior between addAncestorsAsVirtualDirs and
getDirectoryFromFile symmetric.
llvm-svn: 266089
OpenMP 4.0 defines clause 'uniform' in 'declare simd' directive:
'uniform' '(' <argument-list> ')'
The uniform clause declares one or more arguments to have an invariant value for all concurrent invocations of the function in the execution of a single SIMD loop.
The special this pointer can be used as if was one of the arguments to the function in any of the linear, aligned, or uniform clauses.
llvm-svn: 266041
The GNU profiling support indicates that the interface is `_mcount` rather than
`mcount`. Conditionalise the behaviour according to the `-meabi gnu` flag.
Resolves PR27311
llvm-svn: 266039
It seems that there was a miscommunication between Renato and I, and the
original behaviour of AArch64 was to be preserved and not to mirror the new
behaviour. Restore the original behaviour for AArch64. Addresses post-commit
review comments from Renato Golin.
llvm-svn: 265899
This adds support to optionally support using `__gnu_mcount_nc` as the mcount
interface rather than `mcount` for Linux and EABI. The other targets do not
provide an implementation for `__gnu_mcount_nc`. This can be activated via the
`-meabi gnu` flag.
Resolves PR23969.
llvm-svn: 265888
This threads TargetOptions into the TargetInfo hierarchy. This is a rework of
the original attempt to thread additional information into the TargetInfo to
make decisions based on additional ABI related options.
llvm-svn: 265878
Revert the two changes to thread CodeGenOptions into the TargetInfo allocation
and to fix the layering violation by moving CodeGenOptions into Basic.
Code Generation is arguably not particularly "basic". This addresses Richard's
post-commit review comments. This change purely does the mechanical revert and
will be followed up with an alternate approach to thread the desired information
into TargetInfo.
llvm-svn: 265806
This is a mechanical move of CodeGenOptions from libFrontend to libBasic. This
fixes the layering violation introduced earlier by threading CodeGenOptions into
TargetInfo. It should also fix the modules based self-hosting builds. NFC.
llvm-svn: 265702
This threads CodeGenOptions into the TargetInfo hierarchy. This is motivated by
ARM which can change some target information based on the EABI selected
(-meabi). Similar options exist for other platforms (e.g. MIPS) and thus is
generally useful. NFC.
llvm-svn: 265640
Add parsing, sema analysis for 'declare target' construct for OpenMP 4.0
(4.5 support will be added in separate patch).
The declare target directive specifies that variables, functions (C, C++
and Fortran), and subroutines (Fortran) are mapped to a device. The declare
target directive is a declarative directive. In Clang declare target is
implemented as implicit attribute for the declaration.
The syntax of the declare target directive is as follows:
#pragma omp declare target
declarations-definition-seq
#pragma omp end declare target
Based on patch from Michael Wong http://reviews.llvm.org/D15321
llvm-svn: 265530
alignment on Darwin.
Itanium C++ ABI specifies that _Unwind_Exception should be double-word
aligned (16B). To conform to the ABI, libraries implementing exception
handling declare the struct with __attribute__((aligned)), which aligns
the unwindHeader field (and the end of __cxa_exception) to the default
target alignment (which is typically 16-bytes).
struct __cxa_exception {
...
// struct is declared with __attribute__((aligned)).
_Unwind_Exception unwindHeader;
};
Based on the assumption that _Unwind_Exception is declared with
__attribute__((aligned)), ItaniumCXXABI::getAlignmentOfExnObject returns
the target default alignment for __attribute__((aligned)). It turns out
that libc++abi, which is used on Darwin, doesn't declare the struct with
the attribute and therefore doesn't guarantee that unwindHeader is
aligned to the alignment specified by the ABI, which in some cases
causes the program to crash because of unaligned memory accesses.
This commit avoids crashes due to unaligned memory accesses by having
getAlignmentOfExnObject return an 8-byte alignment on Darwin. I've only
fixed the problem for Darwin, but we should also figure out whether other
platforms using libc++abi need similar fixes.
rdar://problem/25314277
Differential revision: http://reviews.llvm.org/D18479
llvm-svn: 264998
The VFS YAML files contain empty directory entries to describe that it's
returning from a subdirectory before describing new files in the parent.
In the future, we should properly sort and write YAML files avoiding
such empty dirs and mitigate the extra recurson cost. However, since
this is used by previous existing YAMLs, make the traversal work in
their presence.
rdar://problem/24499339
llvm-svn: 264970
BuiltinsSystemZ.def is extended to include the required processor
features per intrinsic.
New test test/CodeGen/builtins-systemz-error2.c that checks for
expected errors when instrinsics are used with a subtarget that does
not support the required feature (e.g. vector support).
Reviewed by Ulrich Weigand.
llvm-svn: 264873
Initial parsing/sema/serialization/deserialization support for '#pragma
omp declare simd' directive.
The 'declare simd' construct can be applied to a function to enable the
creation of one or more versions that can process multiple arguments
using SIMD instructions from a single invocation from a SIMD loop.
If the function has any declarations, then the declare simd construct
for any declaration that has one must be equivalent to the one specified
for the definition. Otherwise, the result is unspecified.
This pragma can be applied many times to the same declaration.
Internally this pragma is represented as an attribute. But we need special processing for this pragma because it must be used before function declaration, this directive is applied to.
Differential Revision: http://reviews.llvm.org/D10599
llvm-svn: 264853
Artem Belevich