Summary:
This change edits the language reference to explicitly allow the
existence of readnone and readonly functions that can throw. Full
discussion at
http://lists.llvm.org/pipermail/llvm-dev/2017-January/108637.html
Reviewers: dberlin, chandlerc, hfinkel, majnemer
Reviewed By: majnemer
Subscribers: majnemer, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D28740
llvm-svn: 295000
Summary:
Update the TBAA section to mention the struct path TBAA that LLVM
implements today. This is not a proposal or change in semantics -- it
is intended only to **document** what LLVM already does today.
This is related to https://reviews.llvm.org/D26438 where I've tried to
implement some of the constraints as verifier checks.
Reviewers: anna, reames, rsmith, chandlerc, hfinkel, rjmccall, mehdi_amini, dexonsmith, manmanren
Reviewed By: manmanren
Subscribers: dberlin, dberris, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D26831
llvm-svn: 294999
Summary:
This patch starts the implementation as discuss in the following RFC: http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html
When optimization duplicates code that will scale down the execution count of a basic block, we will record the duplication factor as part of discriminator so that the offline process tool can find the duplication factor and collect the accurate execution frequency of the corresponding source code. Two important optimization that fall into this category is loop vectorization and loop unroll. This patch records the duplication factor for these 2 optimizations.
The recording will be guarded by a flag encode-duplication-in-discriminators, which is off by default.
Reviewers: probinson, aprantl, davidxl, hfinkel, echristo
Reviewed By: hfinkel
Subscribers: mehdi_amini, anemet, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26420
llvm-svn: 294782
Summary:
The intrinsic, marked as returning it's first argument, has no code
generation effect (though currently not every optimization pass knows
that intrinsics with the returned attribute can be looked through).
It is about to be used to by the PredicateInfo pass to attach
predicate information to existing operands, and be able to tell what
the predicate information affects.
We deliberately do not attach any info through a second operand so
that the intrinsics do not need to dominate the comparisons/etc (since
in the case of assume, we may want to push them up the post-dominator
tree).
Reviewers: davide, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29517
llvm-svn: 294341
Summary: Change B type from double to pointer to double.
Reviewers: delena, sanjoy
Reviewed By: sanjoy
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D29009
llvm-svn: 293467
Summary:
Some frontends emit a speculate-and-select idiom for sqrt, wherein they compute
sqrt(x), check if x is negative, and select NaN if it is:
%cmp = fcmp olt double %a, -0.000000e+00
%sqrt = call double @llvm.sqrt.f64(double %a)
%ret = select i1 %cmp, double 0x7FF8000000000000, double %sqrt
This is technically UB as the LangRef is written today if %a is ever less than
-0. But emitting code that's compliant with the current definition of sqrt
would require a branch, which would then prevent us from matching this idiom in
SelectionDAG (which we do today -- ISD::FSQRT has defined behavior on negative
inputs), because SelectionDAG looks at one BB at a time.
Nothing in LLVM takes advantage of this undefined behavior, as far as we can
tell, and the fact that llvm.sqrt has UB dates from its initial addition to the
LangRef.
Reviewers: arsenm, mehdi_amini, hfinkel
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28797
llvm-svn: 293242
This commit introduces a set of experimental intrinsics intended to prevent
optimizations that make assumptions about the rounding mode and floating point
exception behavior. These intrinsics will later be extended to specify
flush-to-zero behavior. More work is also required to model instruction
dependencies in machine code and to generate these instructions from clang
(when required by pragmas and/or command line options that are not currently
supported).
Differential Revision: https://reviews.llvm.org/D27028
llvm-svn: 293226
Summary: Fix the example of equivalent expansion for when mask is all ones.
Reviewers: delena
Reviewed By: delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29179
llvm-svn: 293206
Document the current practice regarding dropping metadata on modules,
functions and global variables.
Differential Revision: https://reviews.llvm.org/D29110
llvm-svn: 293101
Summary:
gep 0, 0 is equivalent to bitcast. LLVM canonicalizes it
to getelementptr because it make SROA can then handle it.
Simple case like
void g(A &a) {
z(a);
if (glob)
a.foo();
}
void testG() {
A a;
g(a);
}
was not devirtualized with -fstrict-vtable-pointers because luck of
handling for gep 0 in Memory Dependence Analysis
Reviewers: dberlin, nlewycky, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28126
llvm-svn: 290763
This change adds a new intrinsic which is intended to provide memcpy functionality
with additional atomicity guarantees. Please refer to the review thread
or language reference for further details.
Differential Revision: https://reviews.llvm.org/D27133
llvm-svn: 290708
There was an efficiency problem with how we processed @llvm.assume in
ValueTracking (and other places). The AssumptionCache tracked all of the
assumptions in a given function. In order to find assumptions relevant to
computing known bits, etc. we searched every assumption in the function. For
ValueTracking, that means that we did O(#assumes * #values) work in InstCombine
and other passes (with a constant factor that can be quite large because we'd
repeat this search at every level of recursion of the analysis).
Several of us discussed this situation at the last developers' meeting, and
this implements the discussed solution: Make the values that an assume might
affect operands of the assume itself. To avoid exposing this detail to
frontends and passes that need not worry about it, I've used the new
operand-bundle feature to add these extra call "operands" in a way that does
not affect the intrinsic's signature. I think this solution is relatively
clean. InstCombine adds these extra operands based on what ValueTracking, LVI,
etc. will need and then those passes need only search the users of the values
under consideration. This should fix the computational-complexity problem.
At this point, no passes depend on the AssumptionCache, and so I'll remove
that as a follow-up change.
Differential Revision: https://reviews.llvm.org/D27259
llvm-svn: 289755
Summary:
Attaching !absolute_symbol to a global variable does two things:
1) Marks it as an absolute symbol reference.
2) Specifies the value range of that symbol's address.
Teach the X86 backend to allow absolute symbols to appear in place of
immediates by extending the relocImm and mov64imm32 matchers. Start using
relocImm in more places where it is legal.
As previously proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105800.html
Differential Revision: https://reviews.llvm.org/D25878
llvm-svn: 289087
`shl nsw i8 1, i8 8` is poison, but `mul i8 1, i8 128` is not.
This was discussed previously here:
http://lists.llvm.org/pipermail/llvm-dev/2015-April/084195.html. From
the discussion, it was not clear which semantics we want for `shl`, but
for now at least make the language reference more accurate.
llvm-svn: 286785
If the inrange keyword is present before any index, loading from or
storing to any pointer derived from the getelementptr has undefined
behavior if the load or store would access memory outside of the bounds of
the element selected by the index marked as inrange.
This can be used, e.g. for alias analysis or to split globals at element
boundaries where beneficial.
As previously proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-July/102472.html
Differential Revision: https://reviews.llvm.org/D22793
llvm-svn: 286514
DW_TAG_atomic_type was already included in Dwarf.defs and emitted correctly,
however Verifier didn't recognize it as valid.
Thus we introduce the following changes:
* Make DW_TAG_atomic_type valid tag for IR and DWARF (enabled only with -gdwarf-5)
* Add it to related docs
* Add DebugInfo tests
Differential Revision: https://reviews.llvm.org/D26144
llvm-svn: 285624
Summary: We need a new LLVM intrinsic to implement MS _AddressOfReturnAddress builtin on 64-bit Windows.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25293
llvm-svn: 284061
On Windows, it is often applied to the second parameter, and the x86
backend is prepared to deal with sret appearing on any parameter.
Other backends assume it only appears on parameter zero, but those are
target-specific requirements, and not an IR-level rule.
llvm-svn: 280951
I've found this out the hard way; LLVM will not normally catch this
error (unless -verify-machineinstrs is passed), and under certain
very specific circumstances (such as register scavenger running
under pressure) this would result in an opaque crash in codegen.
llvm-svn: 280071
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Summary:
This change adds a `ni` specifier in the `datalayout` string to denote
pointers in some given address spaces as "non-integral", and adds some
typing rules around these special pointers.
Reviewers: majnemer, chandlerc, atrick, dberlin, eli.friedman, tstellarAMD, arsenm
Subscribers: arsenm, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22488
llvm-svn: 277085
Summary:
The llvm.invariant.start and llvm.invariant.end intrinsics currently
support specifying invariant memory objects only in the default address
space.
With this change, these intrinsics are overloaded for any adddress space
for memory objects
and we can use these llvm invariant intrinsics in non-default address
spaces.
Example: llvm.invariant.start.p1i8(i64 4, i8 addrspace(1)* %ptr)
This overloaded intrinsic is needed for representing final or invariant
memory in managed languages.
Reviewers: apilipenko, reames
Subscribers: llvm-commits
llvm-svn: 276447
Summary:
The llvm.invariant.start and llvm.invariant.end intrinsics currently
support specifying invariant memory objects only in the default address space.
With this change, these intrinsics are overloaded for any adddress space for memory objects
and we can use these llvm invariant intrinsics in non-default address spaces.
Example: llvm.invariant.start.p1i8(i64 4, i8 addrspace(1)* %ptr)
This overloaded intrinsic is needed for representing final or invariant memory in managed languages.
Reviewers: tstellarAMD, reames, apilipenko
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22519
llvm-svn: 276316
Lots of blocks had "llvm" or "nasm" syntax types but either weren't following
the syntax, or the syntax has changed (and sphinx hasn't keep up) or the type
doesn't even exist (nasm?).
Other documents had :options: what were invalid. I only removed those that had
warnings, and left the ones that didn't, in order to follow the principle of
least surprise.
This is like this for ages, but the buildbot is now failing on errors. It may
take a while to upgrade the buildbot's sphinx, if that's even possible, but
that shouldn't stop us from getting docs updates (which seem down for quite
a while).
Also, we're not losing any syntax highlight, since when it doesn't parse, it
doesn't colour. Ie. those blocks are not being highlighted anyway.
I'm trying to get all docs in one go, so that it's easy to revert later if we
do fix, or at least easy to know what's to fix.
llvm-svn: 276109
The description of the 'returned' attribute says that it is only used when
code-generating the caller. I'd like to make the optimizer smarter about
looking through functions with returned arguments (generally, but motivated by
my llvm.noalias work). As David pointed out in the review of D22202, the
LangRef should be updated to make its expanded uses clearer.
Differential Revision: http://reviews.llvm.org/D22205
llvm-svn: 275026
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
llvm-svn: 274485
This is a resubmittion of 263158 change after fixing the existing problem with intrinsics mangling (see LTO and intrinsics mangling llvm-dev thread for details).
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 274043
This is a resubmittion of 263158 change after fixing the existing problem with intrinsics mangling (see LTO and intrinsics mangling llvm-dev thread for details).
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 273892
This intrinsic safely loads a function pointer from a virtual table pointer
using type metadata. This intrinsic is used to implement control flow integrity
in conjunction with virtual call optimization. The virtual call optimization
pass will optimize away llvm.type.checked.load intrinsics associated with
devirtualized calls, thereby removing the type check in cases where it is
not needed to enforce the control flow integrity constraint.
This patch also introduces the capability to copy type metadata between
global variables, and teaches the virtual call optimization pass to do so.
Differential Revision: http://reviews.llvm.org/D21121
llvm-svn: 273756
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
llvm-svn: 273729
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
This enables use of the 'R' and 'T' memory constraints for inline ASM
operands on SystemZ, which allow an index register as well as an
immediate displacement. This patch includes corresponding documentation
and test case updates.
As with the last patch of this kind, I moved the 'm' constraint to the
most general case, which is now 'T' (base + 20-bit signed displacement +
index register).
Author: colpell
Differential Revision: http://reviews.llvm.org/D21239
llvm-svn: 272547
This enables use of the 'S' constraint for inline ASM operands on
SystemZ, which allows for a memory reference with a signed 20-bit
immediate displacement. This patch includes corresponding documentation
and test case updates.
I've changed the 'T' constraint to match the new behavior for 'S', as
'T' also uses a long displacement (though index constraints are still
not implemented). I also changed 'm' to match the behavior for 'S' as
this will allow for a wider range of displacements for 'm', though
correct me if that's not the right decision.
Author: colpell
Differential Revision: http://reviews.llvm.org/D21097
llvm-svn: 272266
Summary:
It isn't clear what is the operational meaning of loading or storing an
unsized types, since it cannot be lowered into something meaningful.
Since there does not seem to be any practical need for it either, make
such loads and stores illegal IR.
Reviewers: majnemer, chandlerc
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20846
llvm-svn: 271402
This patch adds an IR, assembly and bitcode representation for metadata
attachments for globals. Future patches will port existing features to use
these new attachments.
Differential Revision: http://reviews.llvm.org/D20074
llvm-svn: 271348
The memory location that corresponds to a volatile operation is very
special. They are observed by the machine in ways which we cannot
reason about.
Differential Revision: http://reviews.llvm.org/D20555
llvm-svn: 270879
In practice only a few well known appending linkage variables work.
Currently if codegen sees an unknown appending linkage variable it will
just print it as a regular global. That is wrong as the symbol in the
produced object file has different semantics as the one provided by the
appending linkage.
This just errors early instead of producing a broken .o.
llvm-svn: 269706
This new verifier rule lets us unambigously pick a calling convention
when creating a new declaration for
`@llvm.experimental.deoptimize.<ty>`. It is also congruent with our
lowering strategy -- since all calls to `@llvm.experimental.deoptimize`
are lowered to calls to `__llvm_deoptimize`, it is reasonable to enforce
a unique calling convention.
Some of the tests that were breaking this verifier rule have had to be
split up into different .ll files.
The inliner was violating this rule as well, and has been fixed to avoid
producing invalid IR.
llvm-svn: 269261
An oddity of the .ll syntax is that the "@var = " in
@var = global i32 42
is optional. Writing just
global i32 42
is equivalent to
@0 = global i32 42
This means that there is a pretty big First set at the top level. The
current implementation maintains it manually. I was trying to refactor
it, but then started wondering why keep it a all. I personally find the
above syntax confusing. It looks like something is missing.
This patch removes the feature and simplifies the parser.
llvm-svn: 269096
If a guard call being lowered by LowerGuardIntrinsics has the
`!make.implicit` metadata attached, then reattach the metadata to the
branch in the resulting expanded form of the intrinsic. This allows us
to implement null checks as guards and still get the benefit of implicit
null checks.
llvm-svn: 268148
Summary:
D19403 adds a new pragma for loop distribution. This change adds
support for the corresponding metadata that the pragma is translated to
by the FE.
As part of this I had to rethink the flag -enable-loop-distribute. My
goal was to be backward compatible with the existing behavior:
A1. pass is off by default from the optimization pipeline
unless -enable-loop-distribute is specified
A2. pass is on when invoked directly from opt (e.g. for unit-testing)
The new pragma/metadata overrides these defaults so the new behavior is:
B1. A1 + enable distribution for individual loop with the pragma/metadata
B2. A2 + disable distribution for individual loop with the pragma/metadata
The default value whether the pass is on or off comes from the initiator
of the pass. From the PassManagerBuilder the default is off, from opt
it's on.
I moved -enable-loop-distribute under the pass. If the flag is
specified it overrides the default from above.
Then the pragma/metadata can further modifies this per loop.
As a side-effect, we can now also use -enable-loop-distribute=0 from opt
to emulate the default from the optimization pipeline. So to be precise
this is the new behavior:
C1. pass is off by default from the optimization pipeline
unless -enable-loop-distribute or the pragma/metadata enables it
C2. pass is on when invoked directly from opt
unless -enable-loop-distribute=0 or the pragma/metadata disables it
Reviewers: hfinkel
Subscribers: joker.eph, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D19431
llvm-svn: 267672
Summary:
This tries to anchor down the concept of domains a bit better. I had
trouble initially relating this to anything. Also talking to David
Majnemer on IRC suggested that I wasn't the only one.
Reviewers: hfinkel
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D18799
llvm-svn: 267647
I really thought we were doing this already, but we were not. Given this input:
void Test(int *res, int *c, int *d, int *p) {
for (int i = 0; i < 16; i++)
res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
}
we did not vectorize the loop. Even with "assume_safety" the check that we
don't if-convert conditionally-executed loads (to protect against
data-dependent deferenceability) was not elided.
One subtlety: As implemented, it will still prefer to use a masked-load
instrinsic (given target support) over the speculated load. The choice here
seems architecture specific; the best option depends on how expensive the
masked load is compared to a regular load. Ideally, using the masked load still
reduces unnecessary memory traffic, and so should be preferred. If we'd rather
do it the other way, flipping the order of the checks is easy.
The LangRef is updated to make explicit that llvm.mem.parallel_loop_access also
implies that if conversion is okay.
Differential Revision: http://reviews.llvm.org/D19512
llvm-svn: 267514
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
This intrinsic takes two arguments, ``%ptr`` and ``%offset``. It loads
a 32-bit value from the address ``%ptr + %offset``, adds ``%ptr`` to that
value and returns it. The constant folder specifically recognizes the form of
this intrinsic and the constant initializers it may load from; if a loaded
constant initializer is known to have the form ``i32 trunc(x - %ptr)``,
the intrinsic call is folded to ``x``.
LLVM provides that the calculation of such a constant initializer will
not overflow at link time under the medium code model if ``x`` is an
``unnamed_addr`` function. However, it does not provide this guarantee for
a constant initializer folded into a function body. This intrinsic can be
used to avoid the possibility of overflows when loading from such a constant.
Differential Revision: http://reviews.llvm.org/D18367
llvm-svn: 267223
Both AArch64 and ARM support llvm.<arch>.thread.pointer intrinsics that
just return the thread pointer. I have a pending patch that does the same
for SystemZ (D19054), and there are many more targets that could benefit
from one.
This patch merges the ARM and AArch64 intrinsics into a single target
independent one that will also be used by subsequent targets.
Differential Revision: http://reviews.llvm.org/D19098
llvm-svn: 266818
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
Summary:
The `"patchable-function"` attribute can be used by an LLVM client to
influence LLVM's code generation in ways that makes the generated code
easily patchable at runtime (for instance, to redirect control).
Right now only one patchability scheme is supported,
`"prologue-short-redirect"`, but this can be expanded in the future.
Reviewers: joker.eph, rnk, echristo, dberris
Subscribers: joker.eph, echristo, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19046
llvm-svn: 266715
Rather than relying on the structural equivalence of DICompositeType to
merge type definitions, use an explicit map on the LLVMContext that
LLParser and BitcodeReader consult when constructing new nodes.
Each non-forward-declaration DICompositeType with a non-empty
'identifier:' field is stored/loaded from the type map, and the first
definiton will "win".
This map is opt-in: clients that expect ODR types from different modules
to be merged must call LLVMContext::ensureDITypeMap.
- Clients that just happen to load more than one Module in the same
LLVMContext won't magically merge types.
- Clients (like LTO) that want to continue to merge types based on ODR
identifiers should opt-in immediately.
I have updated LTOCodeGenerator.cpp, the two "linking" spots in
gold-plugin.cpp, and llvm-link (unless -disable-debug-info-type-map) to
set this.
With this in place, it will be straightforward to remove the DITypeRef
concept (i.e., referencing types by their 'identifier:' string rather
than pointing at them directly).
llvm-svn: 266549
Merge members that are describing the same member of the same ODR type,
even if other bits differ. If the file or line differ, we don't care;
if anything else differs, it's an ODR violation (and we still don't
really care).
For DISubprogram declarations, this looks at the LinkageName and Scope.
For DW_TAG_member instances of DIDerivedType, this looks at the Name and
Scope. In both cases, we know that the Scope follows ODR rules if it
has a non-empty identifier.
llvm-svn: 266548
This text is also incorrect (much like r266540). It looks like I missed
updating some of what I moved from SourceLevelDebugging.rst in r232566.
llvm-svn: 266544
This is a resubmittion of 263158 change.
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 266086
`allocsize` is a function attribute that allows users to request that
LLVM treat arbitrary functions as allocation functions.
This patch makes LLVM accept the `allocsize` attribute, and makes
`@llvm.objectsize` recognize said attribute.
The review for this was split into two patches for ease of reviewing:
D18974 and D14933. As promised on the revisions, I'm landing both
patches as a single commit.
Differential Revision: http://reviews.llvm.org/D14933
llvm-svn: 266032
This is a cleanup patch for SSP support in LLVM. There is no functional change.
llvm.stackprotectorcheck is not needed, because SelectionDAG isn't
actually lowering it in SelectBasicBlock; rather, it adds check code in
FinishBasicBlock, ignoring the position where the intrinsic is inserted
(See FindSplitPointForStackProtector()).
llvm-svn: 265851
This patch add support for GCC attribute((ifunc("resolver"))) for
targets that use ELF as object file format. In general ifunc is a
special kind of function alias with type @gnu_indirect_function. Patch
for Clang http://reviews.llvm.org/D15524
Differential Revision: http://reviews.llvm.org/D15525
llvm-svn: 265667
A ``swifterror`` attribute can be applied to a function parameter or an
AllocaInst.
This commit does not include any target-specific change. The target-specific
optimization will come as a follow-up patch.
Differential Revision: http://reviews.llvm.org/D18092
llvm-svn: 265189
Summary:
As discussed on llvm-dev[1].
This change adds the basic boilerplate code around having this intrinsic
in LLVM:
- Changes in Intrinsics.td, and the IR Verifier
- A lowering pass to lower @llvm.experimental.guard to normal
control flow
- Inliner support
[1]: http://lists.llvm.org/pipermail/llvm-dev/2016-February/095523.html
Reviewers: reames, atrick, chandlerc, rnk, JosephTremoulet, echristo
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18527
llvm-svn: 264976
Summary:
Only adds support for "naked" calls to llvm.experimental.deoptimize.
Support for round-tripping through RewriteStatepointsForGC will come
as a separate patch (should be simpler than this one).
Reviewers: reames
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18429
llvm-svn: 264329
Summary:
This intrinsic, together with deoptimization operand bundles, allow
frontends to express transfer of control and frame-local state from
one (typically more specialized, hence faster) version of a function
into another (typically more generic, hence slower) version.
In languages with a fully integrated managed runtime this intrinsic can
be used to implement "uncommon trap" like functionality. In unmanaged
languages like C and C++, this intrinsic can be used to represent the
slow paths of specialized functions.
Note: this change does not address how `@llvm.experimental_deoptimize`
is lowered. That will be done in a later change.
Reviewers: chandlerc, rnk, atrick, reames
Subscribers: llvm-commits, kmod, mjacob, maksfb, mcrosier, JosephTremoulet
Differential Revision: http://reviews.llvm.org/D17732
llvm-svn: 263281
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 263158
Today, we do not allow cmpxchg operations with pointer arguments. We require the frontend to insert ptrtoint casts and do the cmpxchg in integers. While correct, this is problematic from a couple of perspectives:
1) It makes the IR harder to analyse (for instance, it make capture tracking overly conservative)
2) It pushes work onto the frontend authors for no real gain
This patch implements the simplest form of IR support. As we did with floating point loads and stores, we teach AtomicExpand to convert back to the old representation. This prevents us needing to change all backends in a single lock step change. Over time, we can migrate each backend to natively selecting the pointer type. In the meantime, we get the advantages of a cleaner IR representation without waiting for the backend changes.
Differential Revision: http://reviews.llvm.org/D17413
llvm-svn: 261281
Summary:
As previously written, only functions could be convergent. But calls
need to have a notion of convergence as well.
To see why this is important, consider an indirect call. We may or may
not want to disable optimizations around it and behave as though we're
calling a convergent function -- it depends on the semantics of the
language we're compiling. Thus the need for this attr on the call.
Reviewers: jingyue, joker.eph
Subscribers: llvm-commits, tra, jhen, arsenm, chandlerc, hfinkel, resistor
Differential Revision: http://reviews.llvm.org/D17314
llvm-svn: 261111
Summary:
Be more explicit about what 'convergent' means, and indicate that the
compiler may remove the attribute from a function if it can prove that
the function doesn't in fact execute any convergent ops.
Reviewers: resistor, jingyue, joker.eph
Subscribers: hfinkel, chandlerc, arsenm, jhen, tra, llvm-commits
Differential Revision: http://reviews.llvm.org/D17012
llvm-svn: 260318
This matches GCC and MSVC's behaviour, and saves on code size.
We were already not extending i1 return values on x86_64 after r127766. This
takes that patch further by applying it to x86 target as well, and also for i8
and i16.
The ABI docs have been unclear about the required behaviour here. The new i386
psABI [1] clearly states (Table 2.4, page 14) that i1, i8, and i16 return
vales do not need to be extended beyond 8 bits. The x86_64 ABI doc is being
updated to say the same [2].
Differential Revision: http://reviews.llvm.org/D16907
[1]. https://01.org/sites/default/files/file_attach/intel386-psabi-1.0.pdf
[2]. https://groups.google.com/d/msg/x86-64-abi/E8O33onbnGQ/_RFWw_ixDQAJ
llvm-svn: 260133
Summary:
When alias analysis is uncertain about the aliasing between any two accesses,
it will return MayAlias. This uncertainty from alias analysis restricts LICM
from proceeding further. In cases where alias analysis is uncertain we might
use loop versioning as an alternative.
Loop Versioning will create a version of the loop with aggressive aliasing
assumptions in addition to the original with conservative (default) aliasing
assumptions. The version of the loop making aggressive aliasing assumptions
will have all the memory accesses marked as no-alias. These two versions of
loop will be preceded by a memory runtime check. This runtime check consists
of bound checks for all unique memory accessed in loop, and it ensures the
lack of memory aliasing. The result of the runtime check determines which of
the loop versions is executed: If the runtime check detects any memory
aliasing, then the original loop is executed. Otherwise, the version with
aggressive aliasing assumptions is used.
The pass is off by default and can be enabled with command line option
-enable-loop-versioning-licm.
Reviewers: hfinkel, anemet, chatur01, reames
Subscribers: MatzeB, grosser, joker.eph, sanjoy, javed.absar, sbaranga,
llvm-commits
Differential Revision: http://reviews.llvm.org/D9151
llvm-svn: 259986
Summary:
This adds a new kind of operand bundle to LLVM denoted by the
`"gc-transition"` tag. Inputs to `"gc-transition"` operand bundle are
lowered into the "transition args" section of `gc.statepoint` by
`RewriteStatepointsForGC`.
This removes the last bit of functionality that was unsupported in the
deopt bundle based code path in `RewriteStatepointsForGC`.
Reviewers: pgavlin, JosephTremoulet, reames
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16342
llvm-svn: 258338
Summary:
A funclet EH pad may be exited by an unwind edge, which may be a
cleanupret exiting its cleanuppad, an invoke exiting a funclet, or an
unwind out of a nested funclet transitively exiting its parent. Funclet
EH personalities require all such exceptional exits from a given funclet to
have the same unwind destination, and EH preparation / state numbering /
table generation implicitly depends on this. Formalize it as a rule of
the IR in the LangRef and verifier.
Reviewers: rnk, majnemer, andrew.w.kaylor
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15962
llvm-svn: 257273
Summary:
Funclet EH personalities require a tree-like nesting among funclets
(enforced by the ParentPad linkage in the IR), and also require that
unwind edges conform to certain rules with respect to the tree:
- An unwind edge may exit 0 or more ancestor pads
- An unwind edge must enter exactly one EH pad, which must be distinct
from any exited pads
- A cleanupret's edge must exit its cleanuppad
Describe these rules in the LangRef, and enforce them in the verifier.
Reviewers: rnk, majnemer, andrew.w.kaylor
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15961
llvm-svn: 257272
Summary:
I didn't realize that we already allowed atomic load/store of pointers,
it was added in 2012 by r162146. This patch updates the documentation
and tightens the verifier by using DataLayout to make sure that the
stored size is byte-sized and power-of-two. DataLayout is also used for
integers, and while I'm here I updated the corresponding code for
cmpxchg and rmw.
See the following discussion for context and upcoming changes to
add floating-point and vector atomics:
https://groups.google.com/forum/#!topic/llvm-dev/Nh0P_E3CRoo/discussion
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15512
llvm-svn: 255931
Summary:
This patch introduces two new function attributes
InaccessibleMemOnly: This attribute indicates that the function may only access memory that is not accessible by the program/IR being compiled. This is a weaker form of ReadNone.
inaccessibleMemOrArgMemOnly: This attribute indicates that the function may only access memory that is either not accessible by the program/IR being compiled, or is pointed to by its pointer arguments. This is a weaker form of ArgMemOnly
Test cases have been updated. This revision uses this (d001932f3a) as reference.
Reviewers: jmolloy, hfinkel
Subscribers: reames, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D15499
llvm-svn: 255778
This patch allows atomic loads and stores of floating point to be specified in the IR and adds an adapter to allow them to be lowered via existing backend support for bitcast-to-equivalent-integer idiom.
Previously, the only way to specify a atomic float operation was to bitcast the pointer to a i32, load the value as an i32, then bitcast to a float. At it's most basic, this patch simply moves this expansion step to the point we start lowering to the backend.
This patch does not add canonicalization rules to convert the bitcast idioms to the appropriate atomic loads. I plan to do that in the future, but for now, let's simply add the support. I'd like to get instruction selection working through at least one backend (x86-64) without the bitcast conversion before canonicalizing into this form.
Similarly, I haven't yet added the target hooks to opt out of the lowering step I added to AtomicExpand. I figured it would more sense to add those once at least one backend (x86) was ready to actually opt out.
As you can see from the included tests, the generated code quality is not great. I plan on submitting some patches to fix this, but help from others along that line would be very welcome. I'm not super familiar with the backend and my ramp up time may be material.
Differential Revision: http://reviews.llvm.org/D15471
llvm-svn: 255737
SimplifyCFG allows tail merging with code which terminates in
unreachable which, in turn, makes it possible for an invoke to end up in
a funclet which it was not originally part of.
Using operand bundles on invokes allows us to determine whether or not
an invoke was part of a funclet in the source program.
Furthermore, it allows us to unambiguously answer questions about the
legality of inlining into call sites which the personality may have
trouble with.
Differential Revision: http://reviews.llvm.org/D15517
llvm-svn: 255674
This patch adds optional fast-math-flags (the same that apply to fmul/fadd/fsub/fdiv/frem/fcmp)
to call instructions in IR. Follow-up patches would use these flags in LibCallSimplifier, add
support to clang, and extend FMF to the DAG for calls.
Motivating example:
%y = fmul fast float %x, %x
%z = tail call float @sqrtf(float %y)
We'd like to be able to optimize sqrt(x*x) into fabs(x). We do this today using a function-wide
attribute for unsafe-math, but we really want to trigger on the instructions themselves:
%z = tail call fast float @sqrtf(float %y)
because in an LTO build it's possible that calls with fast semantics have been inlined into a
function with non-fast semantics.
The code changes and tests are based on the recent commits that added "notail":
http://reviews.llvm.org/rL252368
and added FMF to fcmp:
http://reviews.llvm.org/rL241901
Differential Revision: http://reviews.llvm.org/D14707
llvm-svn: 255555
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
After much discussion, ending here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151123/315620.html
it has been decided that, instead of having the vectorizer directly generate
special absdiff and horizontal-add intrinsics, we'll recognize the relevant
reduction patterns during CodeGen. Accordingly, these intrinsics are not needed
(the operations they represent can be pattern matched, as is already done in
some backends). Thus, we're backing these out in favor of the current
development work.
r248483 - Codegen: Fix llvm.*absdiff semantic.
r242546 - [ARM] Use [SU]ABSDIFF nodes instead of intrinsics for VABD/VABA
r242545 - [AArch64] Use [SU]ABSDIFF nodes instead of intrinsics for ABD/ABA
r242409 - [Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation
llvm-svn: 255387
Introduced DIMacro and DIMacroFile debug info metadata in the LLVM IR to support macros.
Differential Revision: http://reviews.llvm.org/D14687
llvm-svn: 255245
This commit adds a new target-independent calling convention for C++ TLS
access functions. It aims to minimize overhead in the caller by perserving as
many registers as possible.
The target-specific implementation for X86-64 is defined as following:
Arguments are passed as for the default C calling convention
The same applies for the return value(s)
The callee preserves all GPRs - except RAX and RDI
The access function makes C-style TLS function calls in the entry and exit
block, C-style TLS functions save a lot more registers than normal calls.
The added calling convention ties into the existing implementation of the
C-style TLS functions, so we can't simply use existing calling conventions
such as preserve_mostcc.
rdar://9001553
llvm-svn: 254737
The @llvm.get.dynamic.area.offset.* intrinsic family is used to get the offset
from native stack pointer to the address of the most recent dynamic alloca on
the caller's stack. These intrinsics are intendend for use in combination with
@llvm.stacksave and @llvm.restore to get a pointer to the most recent dynamic
alloca. This is useful, for example, for AddressSanitizer's stack unpoisoning
routines.
Patch by Max Ostapenko.
Differential Revision: http://reviews.llvm.org/D14983
llvm-svn: 254404
The masked intrinsics support all integer and floating point data types. I added the pointer type to this list.
Added tests for CodeGen and for Loop Vectorizer.
Updated the Language Reference.
Differential Revision: http://reviews.llvm.org/D14150
llvm-svn: 253544
This change introduces an instrumentation intrinsic instruction for
value profiling purposes, the lowering of the instrumentation intrinsic
and raw reader updates. The raw profile data files for llvm-profdata
testing are updated.
llvm-svn: 253484
Summary:
This change teaches LLVM's inliner to track and suitably adjust
deoptimization state (tracked via deoptimization operand bundles) as it
inlines through call sites. The operation is described in more detail
in the LangRef changes.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14552
llvm-svn: 253438
Several backends have instructions to reverse the order of bits in an integer. Conceptually matching such patterns is similar to @llvm.bswap, and it was mentioned in http://reviews.llvm.org/D14234 that it would be best if these patterns were matched in InstCombine instead of reimplemented in every different target.
This patch introduces an intrinsic @llvm.bitreverse.i* that operates similarly to @llvm.bswap. For plumbing purposes there is also a new ISD node ISD::BITREVERSE, with simple expansion and promotion support.
The intention is that InstCombine's BSWAP detection logic will be extended to support BITREVERSE too, and @llvm.bitreverse intrinsics emitted (if the backend supports lowering it efficiently).
llvm-svn: 252878
When working with tokens, it is often the case that one has instructions
which consume a token and produce a new token. Currently, we have no
mechanism to represent an initial token state.
Instead, we can create a notional "empty token" by inventing a new
constant which captures the semantics we would like. This new constant
is called ConstantTokenNone and is written textually as "token none".
Differential Revision: http://reviews.llvm.org/D14581
llvm-svn: 252811
Summary:
This change introduces the notion of "deoptimization" operand bundles.
LLVM can recognize and optimize these in more precise ways than it can a
generic "unknown" operand bundles.
The current form of this special recognition / optimization is an enum
entry in LLVMContext, a LangRef blurb and a verifier rule. Over time we
will teach LLVM to do more aggressive optimization around deoptimization
operand bundles, exploiting known facts about kinds of state
deoptimization operand bundles are allowed to track.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14551
llvm-svn: 252806
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
llvm-svn: 252368
This attribute allows the compiler to assume that the function never recurses into itself, either directly or indirectly (transitively). This can be used among other things to demote global variables to locals.
llvm-svn: 252282
Sylvestre Ledru