As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
We want to be writing a 32bit value, so we should be writing 4 bytes
instead of 2.
Patch by Alex Langford <apl@fb.com>.
Differential Revision: https://reviews.llvm.org/D38872
llvm-svn: 315964
This reverts commit SVN r313668. The original test case attempted to
write a pointer value into 16-bits, although the value may exceed the
range representable in 16-bits. Ensure that the symbol is located in
the address space such that its absolute address is representable in
16-bits. This should fix the assertion failure that was seen on the
Windows hosts.
llvm-svn: 313822
This reverts commit SVN r313654. Seems that it is triggering an
assertion on Windows specifically. Revert until I can build on Windows
and look into what is happening there.
llvm-svn: 313668
Add support for the R_AARCH64_ABS{16,32} relocations in the execution
engine. This is primarily used for DWARF debug information relocations
and needed by the LLVM JIT to support JITing for lldb.
Patch by Alex Langford!
llvm-svn: 313654
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
llvm-svn: 310953
This patch adds support for thumb relocations to RuntimeDyldMachOARM, and adds
a target-specific flags field to JITSymbolFlags (so that on ARM we can record
whether each symbol is Thumb-mode code).
RuntimeDyldImpl::emitSection is modified to ensure that stubs memory is
correctly aligned based on the size returned by getStubAlignment().
llvm-svn: 310517
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
This patch implements two GOT relocations:
R_AARCH64_ADR_GOT_PAGE and R_AARCH64_LD64_GOT_LO12_NC
Differential revision: https://reviews.llvm.org/D28571
llvm-svn: 294191
This patch doesn't create thunk for branch operation when following conditions are met:
- Architecture is AArch64
- Relocation target is in the same object file
- Relocation target is close enough to be encoded in immediate offset
In such case we branch directly to the target instead of branching to thunk
Differential revision: https://reviews.llvm.org/D28108
llvm-svn: 291431
Summary: The relocation is missing mask so an address that has non-zero bits in 47:43 may overwrite the register number. (Frequently shows up as target register changed to `xzr`....)
Reviewers: t.p.northover, lhames
Subscribers: davide, aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D27609
llvm-svn: 289880
Summary:
This adds the necessary logic to support relocations to thumb functions in the COFF dynamic linker.
The jumps to function addresses are mostly blx, which requires the ISA selection bit when jumping to a thumb function.
Note: I'm determining if the relocation requires the ISA bit when creating the relocation entries and not when resolving the relocation. I have to do that because I need the ObjectFile and the actual Symbol, which are available only when creating the entries. It would require a gross refactor if I do it otherwise, but I'm okay with doing it if you think it's better.
Reviewers: peter.smith, compnerd
Subscribers: rengolin, sas
Differential Revision: https://reviews.llvm.org/D25151
llvm-svn: 284410
According to the arm arm specifications, 4 bytes are needed for a shift instead
of 8, this was causing the movt instruction to write to a different register
sometimes.
Patch by Walter Erquinigo!
llvm-svn: 280005
If there was a tail call, we would incorrectly handle the relocation. It would
end up indexing into the array with an incorrect section id. The symbol was
external to the module, so the Section ID was UNDEFINED (-1). We would then
index the SmallVector with this ID, triggering an assertion. Use the Value
rather than the section load address in this case.
llvm-svn: 275442
This adds rudimentary support for COFF ARM to the dynamic loader for the
exeuction engine. This can be used by lldb to JIT code into a COFF ARM
environment. This lays the foundation for the loader, though a few of the
relocation types are yet unhandled.
llvm-svn: 273682
llvm-mc is a developer tool, as such it make sense for it to use new
features by default.
This doesn't change the user facing clang, which still defaults to non
relaxable relocations.
llvm-svn: 273014
This fixes IMAGE_REL_I386_DIR32, IMAGE_REL_I386_DIR32NB,
IMAGE_REL_I386_SECREL, and IMAGE_REL_I386_REL32 relocations.
Based on patch by Jon Turney <jon.turney@dronecode.org.uk>
llvm-svn: 272911
Patch by Nitesh Jain.
Summary: The type of Imm in MipsDisassembler.cpp was incorrect since SignExtend64 return int64_t type.As per the MIPSr6 doc ,the offset is added to the address of the instruction following the branch (not the branch itself), to form a PC-relative effective target address hence “4” is added to the offset. The offset of some test case are update to reflect the changes due to “ + 4 ” offset and new test case for negative offset are added.
Reviewers: dsanders, vkalintiris
Differential Revision: http://reviews.llvm.org/D17540
llvm-svn: 270542
Fixing bots failure. test/ExecutionEngine/RuntimeDyld/SystemZ/cfi-relo-pc64.s
requires SystemZ backend. Mark the test as unsupported if the backend is not
available.
llvm-svn: 269470
Summary: When the MCJIT generates ELF code, some DWARF data requires 64-bit PC-relative relocation (R_390_PC64). This patch adds support for R_390_PC64 relocation to RuntimeDyld::resolveSystemZRelocation, to avoid an assertion failure.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20033
llvm-svn: 269436
This patch switches from an unguarded to a guarded loop for eh-frame record
fixups. In the unguarded version we would always make at least one call to
processFDE, which would then crash trying to fix up a frame that didn't exist.
Fixes <rdar://problem/24301582>
llvm-svn: 259103
Summary:
For relocation types that are known to not require stub functions, there
is no need to allocate extra space for the stub functions.
Reviewers: lhames, reames, maksfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14676
llvm-svn: 253920
This adds support for COFF I386. This is sufficient for code execution in a
32-bit JIT, though, imported symbols need to custom lowered for the redirection.
llvm-svn: 251761
Summary: ELF's STT_File symbols may overlap with regular globals in
other files, so we should ignore them here in order to avoid having
bogus entries in the symbol table that confuse us when resolving relocations.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13888
llvm-svn: 250942
Francis Visoiu Mistrih