clause in target region.
According to the OpenMP 5.0, 2.11.3 allocate Directive, Restrictions,
allocate directives that appear in a target region must specify an
allocator clause unless a requires directive with the dynamic_allocators
clause is present in the same compilation unit.
llvm-svn: 356752
Breakpad (but not crashpad) will insert an empty (all-zero) build-id
record for modules which do not have a build-id. This tells lldb to
treat such records as empty/invalid uuids.
llvm-svn: 356751
Summary:
Add a way to expand modular headers for PPCallbacks. Checks can opt-in for this
expansion by overriding the new registerPPCallbacks virtual method and
registering their PPCallbacks in the preprocessor created for this specific
purpose.
Use module expansion in the readability-identifier-naming check
Reviewers: gribozavr, usaxena95, sammccall
Reviewed By: gribozavr
Subscribers: nemanjai, mgorny, xazax.hun, kbarton, jdoerfert, cfe-commits
Tags: #clang, #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D59528
llvm-svn: 356750
Summary: To show that dbscan is insensitive to the order of the points.
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59693
llvm-svn: 356747
Also fix up a couple of minor issues in the test being updated, where
FileCheck could match on incorrect output and fix the test case order to
match the struct order.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D59691
llvm-svn: 356746
The RISC-V ISA defines RV32E as an alternative "base" instruction set
encoding, that differs from RV32I by having only 16 rather than 32 registers.
This patch adds basic definitions for RV32E as well as MC layer support
(assembling, disassembling) and tests. The only supported ABI on RV32E is
ILP32E.
Add a new RISCVFeatures::validate() helper to RISCVUtils which can be called
from codegen or MC layer libraries to validate the combination of TargetTriple
and FeatureBitSet. Other targets have similar checks (e.g. erroring if SPE is
enabled on PPC64 or oddspreg + o32 ABI on Mips), but they either duplicate the
checks (Mips), or fail to check for both codegen and MC codepaths (PPC).
Codegen for the ILP32E ABI support and RV32E codegen are left for a future
patch/patches.
Differential Revision: https://reviews.llvm.org/D59470
llvm-svn: 356744
This patch optimizes the emission of a sequence of SELECTs with the same
condition, avoiding the insertion of unnecessary control flow. Such a sequence
often occurs when a SELECT of values wider than XLEN is legalized into two
SELECTs with legal types. We have identified several use cases where the
SELECTs could be interleaved with other instructions. Therefore, we extend the
sequence to include non-SELECT instructions if we are able to detect that the
non-SELECT instructions do not impact the optimization.
This patch supersedes https://reviews.llvm.org/D59096, which attempted to
address this issue by introducing a new SelectionDAG node. Hat tip to Eli
Friedman for his feedback on how to best handle this issue.
Differential Revision: https://reviews.llvm.org/D59355
Patch by Luís Marques.
llvm-svn: 356741
Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
llvm-svn: 356740
Spec says about the first symbol table entry that index 0 both designates the first entry in the table
and serves as the undefined symbol index. It should have zero value.
Hence the first symbol table entry has no name. And so has to have a st_name == 0.
(http://refspecs.linuxbase.org/elf/gabi4+/ch4.symtab.html)
Currently, we do not emit zero value for the first symbol table entry.
That happens because we add empty strings to the string builder, which
for each such case adds a zero byte:
(https://github.com/llvm-mirror/llvm/blob/master/lib/MC/StringTableBuilder.cpp#L185)
After the string optimization performed it might return non zero indexes for the
empty string requested.
The patch fixes this issue for the case above and other sections with no names.
Differential revision: https://reviews.llvm.org/D59496
llvm-svn: 356739
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
They are not used by anything yet, but a subsequent commit will start
using them for image ops that return 5 dwords.
Differential Revision: https://reviews.llvm.org/D58903
Change-Id: I63e1904081e39a6d66e4eb96d51df25ad399d271
llvm-svn: 356735
Add more complete CHECK lines for the relocations generated when relaxation is
enabled, and add cases where a locally defined symbol is referenced.
Two instances of pcrel_lo(defined_symbol) are commented out, as they will
produce an error. A follow-up patch will fix this.
llvm-svn: 356734
The DataSecEentries is defined as an unordered_map since
order does not really matter.
std::unordered_map<std::string, std::unique_ptr<BTFKindDataSec>>
DataSecEntries;
This seems causing the test static-var-derived-type.ll flaky
as two sections ".bss" and ".readonly" have undeterministic
ordering when performing map iterating, which decides the
output assembly code sequence of BTF_KIND_DATASEC entries.
Fix the test to have only one data section to remove
flakiness.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 356731
Summary:
getRelocatedValue may compute incorrect value for SHT_RELA-typed relocation entries.
// DWARFDataExtractor.cpp
uint64_t DWARFDataExtractor::getRelocatedValue(uint32_t Size, uint32_t *Off,
...
// This formula is correct for REL, but may be incorrect for RELA if the value
// stored in the location (getUnsigned(Off, Size)) is not zero.
return getUnsigned(Off, Size) + Rel->Value;
In this patch, we
* refactor these visit* functions to include a new parameter `uint64_t A`.
Since these visit* functions are no longer used as visitors, rename them to resolve*.
+ REL: A is used as the addend. A is the value stored in the location where the
relocation applies: getUnsigned(Off, Size)
+ RELA: The addend encoded in RelocationRef is used, e.g. getELFAddend(R)
* and add another set of supports* functions to check if a given relocation type is handled.
DWARFObjInMemory uses them to fail early.
Reviewers: echristo, dblaikie
Reviewed By: echristo
Subscribers: mgorny, aprantl, aheejin, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57939
llvm-svn: 356729
Currently, the type id for a derived type is computed incorrectly.
For example,
type #1: int
type #2: ptr to #1
For a global variable "int *a", type #1 will be attributed to variable "a".
This is due to a bug which assigns the type id of the basetype of
that derived type as the derived type's type id. This happens
to "const", "volatile", "restrict", "typedef" and "pointer" types.
This patch fixed this bug, fixed existing test cases and added
a new one focusing on pointers plus other derived types.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 356727
This is the result of discussions on the list about how to deal with intrinsics
which require codegen to disambiguate them via only the integer/fp overloads.
It causes problems for GlobalISel as some of that information is lost during
translation, while with other operations like IR instructions the information is
encoded into the instruction opcode.
This patch changes clang to emit the new faddp intrinsic if the vector operands
to the builtin have FP element types. LLVM IR AutoUpgrade has been taught to
upgrade existing calls to aarch64.neon.addp with fp vector arguments, and
we remove the workarounds introduced for GlobalISel in r355865.
This is a more permanent solution to PR40968.
Differential Revision: https://reviews.llvm.org/D59655
llvm-svn: 356722
Currently, this fails with many tools, e.g.
$ clang -fembed-bitcode-marker -c -o test.o test.c
$ nm test.o
nm: test.o The file was not recognized as a valid object file
-fembed-bitcode-marker creates a LLVM,bitcode section consisting of a single
byte. When reading the object file, IRObjectFile::findBitcodeInObject succeeds,
causing SymbolicFile::createSymbolicFile to try to read the "bitcode" rather
than using the outer Mach-O data - when then fails.
Fix this by making findBitcodeInObject return an error if the section size <= 1.
Patched by: Nicholas Allegra
Differential Revision: https://reviews.llvm.org/D44373
llvm-svn: 356718
This was creating a copy of the register the pseudo itself was
def'ing, leaving a copy of an undefined register. I'm not sure how
the verifier is not catching this, but this avoids asserting in a
future change to RegAllocFast
llvm-svn: 356716
The AArch64 test was broken since the result register already had a
set register class, so this test was a no-op. The mapping verify call
would fail because the result size is not the same as the inputs like
in a copy or phi.
The AMDGPU testcases are half broken and introduce illegal VGPR->SGPR
copies which need much more work to handle correctly (same for phis),
but add them as a baseline.
llvm-svn: 356713
in the include path.
Instead of making the incorrect claim that the included file has an
absolute path, describe the actual problem: the including file was found
either by absolute path, or relative to such a file, or relative to the
primary source file.
llvm-svn: 356712
Use the new cx8 feature flag that was added to the backend to represent support for cmpxchg8b. Use this flag to set the MaxAtomicInlineWidth.
This also assumes all the cmpxchg instructions are enabled for CK_Generic which is what cc1 defaults to when nothing is specified.
Differential Revision: https://reviews.llvm.org/D59566
llvm-svn: 356709
are annotated with notail.
r356705 annotated calls to objc_retainAutoreleasedReturnValue with
notail on x86-64. This commit teaches ARC optimizer to check the notail
marker on the call before turning it into a tail call.
rdar://problem/38675807
llvm-svn: 356707
-malign-double is currently only implemented in the -cc1 interface. But its declared in Options.td so it is a driver option too. But you try to use it with the driver you'll get a message about the option being unused.
This patch teaches the driver to pass the option through to cc1 so it won't be unused. The Options.td says the option is x86 only but I didn't see any x86 specific code in its impementation in cc1 so not sure if the documentation is wrong or if I should only pass this option through the driver on x86 targets.
Differential Revision: https://reviews.llvm.org/D59624
llvm-svn: 356706
with notail on x86-64.
On x86-64, the epilogue code inserted before the tail jump blocks the
autoreleased return optimization.
rdar://problem/38675807
Differential Revision: https://reviews.llvm.org/D59656
llvm-svn: 356705
For the global variables the allocate directive must specify only the
predefined allocator. This allocator must be translated into the correct
form of the address space for the targets that support different address
spaces.
llvm-svn: 356702
Summary:
To make this test pass it was necesary to change `iossim_run.py` to
propagate the `ASAN_ACTIVATION_OPTIONS` environment variable into the
testing environment.
rdar://problem/49114807
Reviewers: kubamracek, yln, serge-sans-paille
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D59660
llvm-svn: 356701
Alexey Bataev