The test was generating long unix socket names, and the addition of a
new folder in the previous patch pushed it over the limit (although
linux has a fairly generous limit for path names, this does not apply to
unix sockets).
Modify the test to use a shorter name instead.
llvm-svn: 325340
The reason this test was disabled is no longer relevant. However, it
didn't turn into an unexpected success because of a syntax error in the
test itself. This commit fixes that and re-enables the test.
llvm-svn: 325339
Since we now can run multiple tests from the same directory at once, we
need to include the test name in the remote test directory instead.
I'm not sure if the test_number in the remote path is necessary anymore
(or even if it was ever necessary), but I choose to leave it in for now.
llvm-svn: 325334
Summary:
Due to in-tree builds, we were parallelizing the tests at the directory
level. Now that the tests are built out-of-tree, we can remove this
limitation and paralelize at file level instead.
This decreases test suite time by about 10% for me, which is not
world-shattering, but it makes the code slightly simpler and will also
allow us to merge tests which were artificially spread over multiple
folders (TestConcurrentEvents...) to work-around this limitation.
To make this work, I've also needed to include the test file name in the
build directory name, as just the test method name is not unique enough
(plenty of tests have a test method called "test" or similar).
While doing this, I've found a couple of tests that are taking waaay longer then
they ought to (TestBreakpointCaseSensitivity -- 90 seconds), which I plan to
look into in the future.
Reviewers: aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43335
llvm-svn: 325322
This test uses XML packets, but libxml is an optional dependency of
lldb, and this test fails if it is not present.
I'm leaving this enabled on mac, as thats the only platform that's
likely to have libxml always available, but ideally we should have a way
to skip this based on build configuration. I'll see if I can whip
something like that up soon, but for the time being, this unblocks the
buildbots.
llvm-svn: 324870
arch incompat with spec in file so it's rejected and the test fails.
will look into this later, will be a test case issue not a test issue;
test case may only be valid when lldb is built for/running on an x86_64
system.
llvm-svn: 324795
This patch makes LLDB's clang module cache path customizable via
settings set target.clang-modules-cache-path <path> and uses it in the
LLDB testsuite to reuse the same location inside the build directory
for LLDB and clang.
Differential Revision: https://reviews.llvm.org/D43099
llvm-svn: 324775
This only worked on MacOS, which now ships a newer version of
python without this bug. As such, we don't leak the fd, and
this test is not needed anymore (as it also hardcoded the python
version in the check).
llvm-svn: 324743
Summary:
Update makefiles to specify -fPIC in Makefile.rules and only throw -fPIC when building a shared library. This change is necessary to allow building the lldb tests on Windows where -fPIC is not a valid option.
Update a few places to Python 3.x syntax
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: stella.stamenova, labath, llvm-commits
Differential Revision: https://reviews.llvm.org/D42994
llvm-svn: 324671
Summary:
The test was trying to reproduce a bug in handling of two concurrent
events, which was impossible to do reliably in a black-box style test.
In practice, this meant the test was only ever failing on remote
targets, as these were slow enough to trigger this.
Fortunately, we now have the ability to mock the server side of the
connection, which means we can simulate the failure deterministically,
so I rewrite the test to use the new gdb-client framework.
I've needed to add a couple of new packets to the mock server to be able
to do this. Instead of trying to guess how a "typical" gdb-client test
will want to handle this, I throw an exception in the implementation to
force the user to override them (the packets are only sent if the test
explicitly performs some action which will trigger them, so a basic test
which e.g. does not need the "continue" functionality will not need to
implement them).
Reviewers: owenpshaw
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D42959
llvm-svn: 324590
The change in r324488 dropped the existing category attribute in for
instance methods. This patch corrects that.
Differential revision: https://reviews.llvm.org/D43024
llvm-svn: 324492
Inlined tests have a test function that is actually an instance method,
which requires a slightly different approach when it comes to setting
the category attribute. The attribute must be set on the actual
function, rather than on a particular instance.
llvm-svn: 324488
This patch creates a <test>.dwarf, <test>.dwo, etc., build directory for each testcase variant.
Most importantly, this eliminates the need for the per-test lock file in the source directory.
Tests that are marked as NO_DEBUG_INFO_TESTCASE and build with
buildDefault() are built in a <test>.default build directory.
Differential Revision: https://reviews.llvm.org/D42763
llvm-svn: 324368
We've had a bug (fixed by https://reviews.llvm.org/D42828) where the
thread name was being read incorrectly. Add a test for this behavior.
llvm-svn: 324230
This test was marked as an expected failure because of PR20231 but it
seems to consistently result in an unexpected success across the bots.
Let's try to re-enable this test again.
llvm-svn: 324227
Summary:
This changes the way we store the debug info variant to make it
available earlier in the test bringup: instead of it being set by the
test wrapper method, it is set as a *property* of the wrapper method.
This way, we can inspect it as soon as self.testMethodName is
initialized. The retrieval is implemented by a new function
TestBase.getDebugInfo(), and all that's necessary to make it work is to
change self.debug_info into self.getDebugInfo().
While searching for debug_info occurences i noticed that TestLogging is
being replicated for no good reason, so I removed the replication there.
Reviewers: aprantl, jingham
Subscribers: eraman, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D42836
llvm-svn: 324226
I have found LLDB cannot find separate debug info of Fedora /usr/bin/gdb.
It is because:
lrwxrwxrwx 1 root root 14 Jan 25 20:41 /usr/bin/gdb -> ../libexec/gdb*
-rwxr-xr-x 1 root root 10180296 Jan 25 20:41 /usr/libexec/gdb*
ls: cannot access '/usr/lib/debug/usr/bin/gdb-8.0.1-35.fc27.x86_64.debug': No such file or directory
-r--r--r-- 1 root root 29200464 Jan 25 20:41 /usr/lib/debug/usr/libexec/gdb-8.0.1-35.fc27.x86_64.debug
FYI that -8.0.1-35.fc27.x86_64.debug may look confusing, it was always just
.debug before.
Why is /usr/bin/gdb a symlink is offtopic for this bugreport, Fedora has it so
for some reasons.
It is always safest to look at the .debug file only after resolving all
symlinks on the binary file.
Differential revision: https://reviews.llvm.org/D42853
llvm-svn: 324224
I have found the lookup by build-id
(when lookup by /usr/lib/debug/path/name/exec.debug failed) does not work as
LLDB tries the build-id hex string in uppercase but Fedora uses lowercase.
xubuntu-16.10 also uses lowercase during my test:
/usr/lib/debug/.build-id/6c/61f3566329f43d03f812ae7057e9e7391b5ff6.debug
Differential revision: https://reviews.llvm.org/D42852
llvm-svn: 324222
LLDB queries Spotlight to locate .dSYM bundles based on the UUID
embedded in a binary, and because the UUID is a hash of filename and
.text section, there *will* be conflicts inside $BUILD_DIR.
This should fix the broken green dragon bots.
llvm-svn: 324019
Using the "run_to_{source,name}_breakpoint will allow us to remove
a lot of boiler-plate from the testsuite. We mostly use source
breakpoints, but some tests use by name ones so this was needed.
llvm-svn: 324010
The mock server was sending acks back in response to spurious acks from
the client, but the client was not prepared to handle these. Most of the
time this would work because the only time the client was sending
unsolicited acks is after the initial connection, and there reply-ack
would get ignored in the "flush all packets from the server" loop which
came after the ack. However, this loop had only a 10ms delay, and
sometimes this was not enough to catch the reply (which meant the
connection got out of sync, and test failed).
Since this behavior not consistent with how lldb-server handles this
situation (it just ignores the ack), I fix the mock server to do the
same.
llvm-svn: 323953
We started passing the "all" target to make, which rendered the
"localall" trick in this Makefile inoperable.
I implement the strip step differently, and also reformat the Makefile.
llvm-svn: 323855
Initialize the default value of SymbolFileDWARF uuid with
the appropriately shifted DW_INVALID_OFFSET constant.
This change fixes the collision in the computation of DIE uid
(inside DIERef::GetUID) and incorrect CompileUnit lookup
(because of the misleading cu_offset value).
Test plan: make check-lldb
Differential revision: https://reviews.llvm.org/D42563
llvm-svn: 323832
Strings which contain garbage data can trigger an exception in the XUnit
plugin at the UTF-8 decode step because the decode is strict. Use a lax
mode to avoid an exception.
See: https://ci.swift.org/job/oss-lldb-incremental-osx/780
llvm-svn: 323817
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
The logic was incorrect because on windows, we need to look for
yaml2obj.EXE. I implement the search in terms of
distutils.spawn.find_executable, which should handle the platform
differences for us.
llvm-svn: 323744
Summary:
Adds new utilities that make it easier to write test cases for lldb acting as a client over a gdb-remote connection.
- A GDBRemoteTestBase class that starts a mock GDB server and provides an easy way to check client packets
- A MockGDBServer that, via MockGDBServerResponder, can be made to issue server responses that test client behavior.
- Utility functions for handling common data encoding/decoding
- Utility functions for creating dummy targets from YAML files
----
Split from the review at https://reviews.llvm.org/D42145, which was a new feature that necessitated the new testing capabilities.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: hintonda, davide, jingham, krytarowski, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42195
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 323636
Now the function returns `False`, and the caller can take the
appropriate action (in this case, for --executable, reporting
that the file doesn't exist).
llvm-svn: 323566
TestLibcxxListLoop - fails because the evil "define private public"
trick does not work with gmodules. The purpose of the test is not to
test debug info parsing so I just mark it as no_debug_info_testcase.
In the long term it may be interesting to write a mock std::list which
will allow us to test bad inputs to data formatters more easily.
TestGModules - seems to be a genuine bug. Filed pr36107 and xfailed.
llvm-svn: 323520
This test #include's stdio.h, which, on at least two bots results in a
module import of MacTypes.h (due to weird SDK layering issues), which
causes the test to fail to compile.
Just don't #include stdio.h, as it's not needed for the test.
llvm-svn: 323467
Stale global module caches cause problems for the bots. The modules
become invalid when clang headers are updated by version control, and
tests which use these modules fail to compile, e.g:
fatal error: file '.../__stddef_max_align_t.h' has been modified since the module file '/var/.../Darwin.pcm' was built
note: please rebuild precompiled header '/var/.../Darwin.pcm'
Eventually we should transition to having just a single module cache to speed
tests up. This patch should be just enough to fix the spurious bot failures due
to stale caches.
rdar://36479805, also related to llvm.org/PR36048
Differential Revision: https://reviews.llvm.org/D42277
llvm-svn: 323450
building method override tables for CXXMethodDecls in
DWARFASTParserClang::CompleteTypeFromDWARF.
C++ virtual method calls in LLDB expressions may fail if the override table for
the method being called is not correct as IRGen will produce references to the
wrong (or a missing) vtable entry.
This patch does not fix calls to virtual methods with covariant return types as
it mistakenly treats these as overloads, rather than overrides. This will be
addressed in a future patch.
Review: https://reviews.llvm.org/D41997
Partially fixes <rdar://problem/14205774>
llvm-svn: 323163
Due to an unfortunate difference between the open source test harness
and our internal harness, applying two @skip... decorators to this test
works in the internal build but not in the open source build.
I've tried another approach to skipping this test and tested it out with
the open source harness. Hopefully this sticks!
rdar://36417163
llvm-svn: 322756
This test frequently times out on our bots. While we're investigating
the issue, mark the test as skipped so the builds aren't impacted as
much.
rdar://36417163
llvm-svn: 322728
RemoveInvalidLocations was clearing out the m_locations in the
breakpoint by hand, and it wasn't also clearing the locations from
the address->location map, which confused us when we went to update
breakpoint locations.
I also made Breakpoint::ModulesChanged check the Location's Section
to make sure it hadn't been deleted. This shouldn't strictly be necessary,
but if the DynamicLoaderPlugin doesn't do it's job right (I'm looking at
you new Darwin DynamicLoader...) then it can end up leaving stale locations
on rerun. It doesn't hurt to clean them up here as a backstop.
<rdar://problem/36134350>
llvm-svn: 322348
This test stresses expression evaluation support for template functions.
Currently the support is rudimentary, and running this test causes assertion
failures in clang. This test cannot be XFAIL'ed because the test harness
treats assertion failures as unexpected events. For now, the test must be
skipped.
llvm-svn: 322340
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
This is r322209, but with fixed VDSO loading fixed.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322251
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322209
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Summary:
This used to be important when all tests were run in a single process,
but that has no longer been the case for a while. Furthermore, this hook fails
to build on new mac versions for several people, and it's not clear
whether fixing it is worth the effort.
Reviewers: jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41871
llvm-svn: 322167
This fixes a bug in -gmodules DWARF handling when debugging without a .dSYM bundle
that was particularly noticable when debugging LLVM itself.
Debugging without clang modules and DWO handling should be unaffected by this patch.
<rdar://problem/32436209>
llvm-svn: 321802
The test works fine on linux, and I believe other targets should not
have an issue with as well. If they do, we can start blacklisting
instead of whitelisting.
The idea of using "-1" as the value of the pointer on non-apple targets
backfired, as it fails the "address != LLDB_INVALID_ADDRESS" test (-1 is
the value of LLDB_INVALID_ADDRESS). However, it should be safe to use
0x100 for other targets as well. The first page of memory is generally
kept unreadable to catch null pointer dereferences.
llvm-svn: 321353
an empty Python string object when it reads a 0-length
string out of memory (and a successful SBError object).
<rdar://problem/26186692>
llvm-svn: 321338
Two tests were failing because the debugger was picking up multiply
defined internal symbols from the system libraries. This is a bug, as
there should be no ambiguity because the tests are defining variables
with should shadow these symbols, but lldb is not smart enough to figure
that out.
I work around the issue by renaming the variables in these tests, and in
exchange I create a self-contained test which reproduces the issue
without depending on the system libraries.
This increases the predictability of our test suite.
llvm-svn: 321271
"Default" is a valid QoS for a thread on older versions of macOS,
like the one installed in the bot.
Thanks to Jason Molenda for helping me figuring out the problem.
<rdar://problem/28346273>
llvm-svn: 320883
I tested on x86-64 and Jason on embedded architectures.
This cleans up another couple of reported unexpected successes.
<rdar://problem/28623427>
llvm-svn: 320452
After discussing this with Jim and Jason, I think my commit was
actually sweeping the issue under the carpet rather than fixing it.
I'll take a closer look between tonight and tomorrow.
llvm-svn: 320447
Some tests are failing on macOS when building with the in-tree
clang, and this is because they're conditional on the version released.
Apple releases using a different versioning number, but as these are
conditional on clang < 7, they fail for clang ToT (which is 6.0).
As a general solution, we actually need either a mapping between
Apple internal release version and public ones.
That said, I discussed this with Fred , and Apple Clang 6.0 seems
to be old enough that we can remove this altogether (which means I
can delay implementing the general purpose solution for a bit).
Differential Revision: https://reviews.llvm.org/D41101
llvm-svn: 320444
This is the first of a series of commits aiming to improve
overall LLDB's hygiene. Feel free to shout at me in case
I break something.
<rdar://problem/30915340>
llvm-svn: 320425
Also add a test. There should also be control for this
in ProcessLaunchInfo and a "target launch" flag, but at least
this will allow you to control it somehow.
<rdar://problem/35842137>
llvm-svn: 319731
Summary:
This flag is on by default for darwin and freebsd, but off for linux.
Without it, clang will sometimes not emit debug info for types like
std::string. Whether it does this, and which tests will fail because of
that depends on the linux distro and c++ library version.
A bunch of tests were already setting these flags manually, but here
instead I take a whole sale approach and enable this flag for all tests.
Any test which does not want to have this flag (right now we have one
such test) can turn it off explicitly via
CFLAGS_EXTRAS+=$(LIMIT_DEBUG_INFO_FLAGS)
This fixes a bunch of data formatter tests on red-hat.
Reviewers: davide, jankratochvil
Subscribers: emaste, aprantl, krytarowski, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D40717
llvm-svn: 319653
unambiguously on one bit of code. On macOS these
lines mapped to two distinct locations, and that
was artificially throwing off the test.
llvm-svn: 319472
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
New android ndk linker started adding more flags to the produced
binaries, which causes older dynamic linkers display warnings to stderr
about unsupported flags. This interferes with our stderr tests.
Extend the hasChattyStderr function to catch these targets as well.
llvm-svn: 319028
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
This test was failing in various configurations on linux in a fairly
unpredictible way. The success depended on whether the c++ abi library
was linked in statically or not and how well was the linker able to
strip parts of it. This introduces additional code to the "dummmy" test
executable, which ensures that all parts of the library needed to
evaluate the expressions are always present.
Reviewers: clayborg
Subscribers: srhines, tatyana-krasnukha, davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D39727
llvm-svn: 317678
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary: These fail because `-fPIC` is not supported on Windows.
Reviewers: zturner, jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39692
llvm-svn: 317529
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Now that the wathpoint tests have their own category, we can easily skip
them on devices which don't have watchpoint support. Therefore, we don't
need an android xfail on each of these tests.
llvm-svn: 317276
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
dwarf&dwo versions were doing it, but gmodules and dsym weren't. All
this function does right now is pass OS=Android to make when targeting
android. This enables us to run dotest without manually passing --env
OS=Android.
llvm-svn: 317130
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
Unified headers will be the only way to build applications in NDK r16,
and it also works with NDK r15.
This also bumps the minimum supported android version to 16.
llvm-svn: 316985
this test was using a single makefile to build two executables. This
setup, although not supported by Makefile.rules, happened to
work in most configurations, except when building with the android ndk
r16.
Here I move the building of the second executable to a separate
makefile, which is the solution other tests use for multiple targets.
llvm-svn: 316982
The test was asserting that we can only find one frame in the minidump.
Now that we have the default unwind plan from the ABI plugin, we are
able to find 5 more frames using the frame pointer chaining. Correct the
expectation in the test.
llvm-svn: 316688
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
The commit breaks the case where you specify just a filename to the
compiler. Previously, it would look up the compiler in your path, now it
complains that the compiler is not found. One of the lldb buildbots is
depending on this. It seems like a nice feature to have, as it means
less typing and being able to avoid hard-coding the system compiler path
in the bot config.
This reverts commit r316393.
llvm-svn: 316451
If you pass an invalid compiler/debugger path on the cmdline to `dotest.py` this is what you get.
Traceback (most recent call last):
[...]
File "dotest.py", line 7, in <module>
lldbsuite.test.run_suite()
[...]
And with the patch applied:
/home/davide/work/build-lldb/bin/clandasfasg is not a valid path, exiting
Differential Revision: https://reviews.llvm.org/D39199
llvm-svn: 316393
Since the ipv6 patch, we've experienced occasional flakyness in
lldb-server tests. This was due to the fact that lldb-server was trying
to listen on both v4 and v6 localhost sockets (and consider it a success
if at least one of them succeeded), while the test framework was only
trying to connect to the v4 one.
This change makes sure lldb-server only listens on the v4 socket.
llvm-svn: 316391
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
Summary:
Test was skipped because -data-evaluate-expression was thought
to not work on globals. This is not the case - the issue was clang
removes debug info for globals in cpp files that are not used.
Add a reference to the globals in question, and fix memory patter in
test to match memory pattern in testcase.
Reviewers: ki.stfu, abidh
Reviewed By: ki.stfu
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D37533
llvm-svn: 312726
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
The Linux xfail decorator was removed in r272326 with the claim that the
test "runs reliably on the linux x86 buildbot." It also runs reliably on
FreeBSD for me.
llvm.org/pr25925
llvm-svn: 310644
This test is consistently reporting unexpected pass for me on FreeBSD
10 and 12. It was failing on the old FreeBSD buildbot which has now been
retired for some time. Will investigate further if this fails once a new
buildbot is configured and running tests.
llvm.org/pr17807
llvm-svn: 310626
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
This reapplies https://reviews.llvm.org/D35740 with a tweak to find
the section by name rather than type. Section types don't distinguish
between regular sections and their DWO counterparts.
llvm-svn: 308905
The DWO handling code can get confused by clang modules which also use
skeleton CUs to point to the object file with the full debug
info. This patch detects whether an object is a "real" DWO or a clang
module and prevents LLDB from interpreting clang modules as DWO. This
fixes the regression in TestWithModuleDebugging.
http://llvm.org/bugs/show_bug.cgi?id=33875
Differential Revision: https://reviews.llvm.org/D35740
llvm-svn: 308850
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Starting with android ndk r15, clang much more tests are affected by the
-mstackrealign bugl (now nearly all functions are affected, and not just
the ones requiring 16-byte alignment). Due to their numbers, Xfailing
all of them is not a viable option, so we will just have to declare this
configuration unsupported, and wait until ndk ships a clang version that
has this bug fixed.
llvm-svn: 307252
to make a target, set a source regex breakpoint, run to
the breakpoint and find the thread that hit the breakpoint.
Start the process of replacing the boiler plate with this
routine.
llvm-svn: 307234
This adds a simple testcase for MainThreadCheckerRuntime. The tool (Main Thread Checker) is only available on Darwin, so the test also detects the presence of libMainThreadChecker.dylib and is skipped if the tool is not available.
llvm-svn: 307170
All android builds systems have switched to -mstackrealign for building
x86 binaries, so follow their cue with our mini build system.
This presently breaks just one test (TestReturnValue), and this is due
to a compiler bug, which has already been fixed in clang, but it hasn't
made it yet into the official NDK compiler. While I'm touching that
test, I also remove an android-specific XFAIL, which is not relevant
anymore.
llvm-svn: 306683
components to not depend on "." characters in the fileanme
(e.g. "Foundation.framework") but instead to just use path
separators. The names of the files themselves may have dots
in them ("com.apple.sbd") which would break the old scheme.
Also add a test case for this (macosx/find-dsym/bundle-with-dot-in-filename)
as well as a test case for r304520 (macosx/find-dsym/deep-bundle)
which needed a similar setup to test correctly on a single machine.
(both of these are really testing remote debug session situations
where the binary can't be found on the system where lldb is running,
complicating the test case a bit.)
<rdar://problem/31825940>
llvm-svn: 305441
NSString is loaded from the DWARF, which doesn't have the concept of protocols.
When this is used with the NSMutableDictionary type from Objective-C modules,
this produces errors of the form
error: cannot initialize a parameter of type 'id<NSCopying> _Nonnull' with an rvalue of type 'NSString *'
We're aware of these problems and have an internal bug report filed
(<rdar://problem/32777981>)
llvm-svn: 305424
The step count depends on code generated by compiler (GCC/Clang).
It will also vary for different MIPS arch variant. Hence skipping these test for MIPS.
Subscribers: jaydeep, bhushan, lldb-commits, slthakur
llvm-svn: 305383
Clang does not accept regparm attribute on these platforms.
Fortunately, the default calling convention passes arguments
in registers any way
Subscribers: jaydeep, bhushan, lldb-commits, slthakur
llvm-svn: 305378
This test started being flaky since r303848 (RunThreadPlan: Fix halting
logic in IgnoreBreakpoints = false). I am not reverting that, as I am
confident that actually fixed a problem. A more likely explanation is
that there is still one corner case that is not handled correctly there.
Marking the test as flaky until I get a chance to investigate. I also
mark the test as no-debug-info-dependend -- it stresses expression
evaluation, as far as debug info goes, the test if extremely simple.
llvm-svn: 305286
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
I was over-eager to unable this test in r304976. It still fails in this
combination, at there does not seem to be anything we can do about it,
as the generated code does not preserve the link register.
llvm-svn: 305062
Summary:
When a call instruction is the last instruction in a function, the
backtrace PC will point past the end of the function. We already had
special code to handle that, but we did not handle the case where the PC
ends up outside of the bounds of the module containing the function,
which is a situation that occured in TestNoreturnUnwind on android for
some arch/compiler combinations.
I fix this by adding an argument to Address resolution code which states
that we are ok with addresses pointing to the end of a module/section to
resolve to that module/section.
I create a reproducible test case for this situation by hand-crafting an
executable which has a noreturn function at the end of a module.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32022
llvm-svn: 304976
When parsing types originating in modules, it is possible to encounter AttributedTypes
(such as the type generated for NSString *_Nonnull). Some of LLDB's ClangASTContext
methods deal with them; others do not. In particular, one function that did not was
GetTypeInfo, causing TestObjCNewSyntax to fail.
This fixes that, treating AttributedType as essentially transparent and getting the
information for the modified type.
In addition, however, TestObjCNewSyntax is a monolithic test that verifies a bunch of
different things, all of which can break independently of one another. I broke it
apart into smaller tests so that we get more precise failures when something (like
this) breaks.
Differential Revision: https://reviews.llvm.org/D33812
llvm-svn: 304510
This works on SVN but is a bit fragile on the Swift branch.
I'm adding the test to both, so we have this path covered.
<rdar://problem/32372372>
llvm-svn: 304314
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
This is a resubmit of r303732, which was reverted due to a regression.
The original patch caused a regression in TestLoadUnload, which has only showed
up when running the remote test suite. The problem there was that we interrupted
the target just as it has hit the rendezvous breakpoint in the dlopen call. This
meant that the stop reason was set to "breakpoint" even though the event would
not have been broadcast if we had not stopped the process. I fix this by
checking StopInfo->ShouldNotify() before stopping.
I also add a new test for the handling of conditional breakpoints in
expressions, which I noticed to be broken (pr33164)
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303848
Summary:
The function had logic to handle the case when the expression terminated
while we were trying to halt the process, but it failed to take into
account the possibility that the expression stopped because it hit a
breakpoint. This was caused by the fact that the handling of the stopped
events was duplicated for the "halting" and regular cases (the regular
case handled this situation correctly). I've tried to merge these two
cases into one to make sure they stay in sync.
I should call out that the two cases were checking whether the thread
plan has completed in slightly different ways. I am not sure what is the
difference between them, but I think the check should be the same in
both cases, whatever it is, so I just took the one from the regular
case, as that is probably more tested.
For the test, I modified TestUnwindExpression to run the expression with
a smaller timeout (this is how I found this bug originally). With a 1ms
one thread timeout, the test failed consistently without this patch.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303732
For remote targets we need to call registerSharedLibrariesWithTarget to
make sure they are installed alongside main executable. This also
required a small fixup in the the mentioned function as in this case
"One" was both a directory name and a library name template. I fixed it
to make sure it checks that the string refers to a file before it
assumed it was a full library path.
llvm-svn: 303248
When it resolves symbol-only variables, the expression parser
currently looks only in the global module list. It should prefer
the current module.
I've fixed that behavior by making it search the current module
first, and only search globally if it finds nothing. I've also
added a test case.
After review, I moved the core of the lookup algorithm into
SymbolContext for use by other code that needs it.
Thanks to Greg Clayton and Pavel Labath for their help.
Differential Revision: https://reviews.llvm.org/D33083
llvm-svn: 303223
ptr_refs exposed a problem in ClangASTContext's implementation: it
uses an accessor to downcast a QualType to an
ObjCObjectPointerType, but the accessor is not fully general.
getAs() is the safer way to go.
I've added a test case that uses ptr_refs in a way that would
crash before the fix.
<rdar://problem/31363513>
llvm-svn: 303110
as described in pr33042, we cannot reliably retrieve the return value on
arm64 in cases it is returned via x8 pointer. I tried to do this as
surgically as possible and disabled it only on targets I know to be
affected, as the code is still useful, even though it can only work on
best-effort basis.
llvm-svn: 303076
Templates can end in parameter packs, like this
template <class T...> struct MyStruct
{ /*...*/ };
LLDB does not currently support these parameter packs;
it does not emit them into the template argument list
at all. This causes problems when you specialize, e.g.:
template <> struct MyStruct<int>
{ /*...*/ };
template <> struct MyStruct<int, int> : MyStruct<int>
{ /*...*/ };
LLDB generates two template specializations, each with
no template arguments, and then when they are imported
by the ASTImporter into a parser's AST context we get a
single specialization that inherits from itself,
causing Clang's record layout mechanism to smash its
stack.
This patch fixes the problem for classes and adds
tests. The tests for functions fail because Clang's
ASTImporter can't import them at the moment, so I've
xfailed that test.
Differential Revision: https://reviews.llvm.org/D33025
llvm-svn: 302833
Summary:
'arch' is a valid qHostInfo key, but the unit
test for qHostInfo did not include it in the set of possible keys.
Reviewers: tfiala, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32711
llvm-svn: 302260
Summary:
I have found a way to segfault lldb in 7 keystrokes! Steps to reproduce:
1) Launch lldb
2) Type `print` and hit enter. lldb will now prompt you to type a list of
expressions, followed by an empty line.
3) Hit enter, indicating the end of your input.
4) Segfault!
After some investigation, I've found the issue in Host/common/Editline.cpp.
Editline::MoveCursor() relies on m_input_lines not being empty when the `to`
argument is CursorPosition::BlockEnd. This scenario, as far as I can tell,
occurs in one specific instance: In Editline::EndOrAddLineCommand() when the
list of lines being processed contains exactly one string (""). Meeting this
condition is fairly simple, I have posted steps to reproduce above.
Reviewers: krytarowski, zturner, labath
Reviewed By: labath
Subscribers: scott.smith, lldb-commits
Differential Revision: https://reviews.llvm.org/D32421
Patch by Alex Langford.
llvm-svn: 302225
Summary:
Arm64 Procedure Call Standard specifies than only vectors up to 16 bytes
are stored in v0 (which makes sense, as that's the size of the
register). 32-byte vector types are passed as regular structs via x8
pointer. Treat them as such.
This fixes TestReturnValue for arm64-clang. I also split the test case
into two so I can avoid the if(gcc) line, and annotate each test
instead. (It seems the vector type tests fail with gcc only when
targetting x86 arches).
Reviewers: tberghammer, eugene
Subscribers: aemerson, omjavaid, rengolin, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32813
llvm-svn: 302220
Summary:
The existing cpp-level checks using PR_MPX_ENABLE_MANAGEMENT aren't sufficient,
as this isn't defined for linux kernel versions below 3.19.
Reviewers: valentinagiusti, zturner, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32719
llvm-svn: 302027
gnuwin32 rm does not like wildcards that match nothing even if we
specify -f (probably because the wildcard expansion happens in-process
there). We could use make $(wildcard) here, but it seems safer to
explicitly list the files here, just like the normal Makefile.rules
does.
llvm-svn: 302013
Loading a shared library can require a large amount of work; rather than do that serially for each library,
this patch will allow parallelization of the symbols and debug info name indexes.
From scott.smith@purestorage.comhttps://reviews.llvm.org/D32598
llvm-svn: 301609
Many times a user wants to access a type when there's a variable of
the same name, or a variable when there's a type of the same name.
Depending on the precise context, currently the expression parser
can fail to resolve one or the other.
This is because ClangExpressionDeclMap has logic to limit the
amount of information it searches, and that logic sometimes cuts
down the search prematurely. This patch removes some of those early
exits.
In that sense, this patch trades performance (early exit is faster)
for correctness.
I've also included two new test cases showing examples of this
behavior – as well as modifying an existing test case that gets it
wrong.
llvm-svn: 301273
LLDB uses clang::DeclContexts for lookups, and variables get put into
the DeclContext for their abstract origin. (The abstract origin is a
DWARF pointer that indicates the unique definition of inlined code.)
When the expression parser is looking for variables, it locates the
DeclContext for the current context. This needs to be done carefully,
though, e.g.:
__attribute__ ((always_inline)) void f(int a) {
{
int b = a * 2;
}
}
void g() {
f(3);
}
Here, if we're stopped in the inlined copy of f, we have to find the
DeclContext corresponding to the definition of f – its abstract
origin. Clang doesn't allow multiple functions with the same name and
arguments to exist. It also means that any variables we see must be
placed in the appropriate DeclContext.
[Bug 1]: When stopped in an inline block, the function
GetDeclContextDIEContainingDIE for that block doesn't properly
construct a DeclContext for the abstract origin for inlined
subroutines. That means we get duplicated function DeclContexts, but
function arguments only get put in the abstract origin's DeclContext,
and as a result when we try to look for them in nested contexts they
aren't found.
[Bug 2]: When stopped in an inline block, the DWARF (for space
reasons) doesn't explicitly point to the abstract origin for that
block. This means that the function GetClangDeclContextForDIE returns
a different DeclContext for each place the block is inlined. However,
any variables defined in the block have abstract origins, so they
will only get placed in the DeclContext for their abstract origin.
In this fix, I've introduced a test covering both of these issues,
and fixed them.
Bug 1 could be resolved simply by making sure we look up the abstract
origin for inlined functions when looking up their DeclContexts on
behalf of nested blocks.
For Bug 2, I've implemented an algorithm that makes the DeclContext
for a block be the containing DeclContext for the closest entity we
would find during lookup that has an abstract origin pointer. That
means that in the following situation:
{ // block 1
int a;
{ // block 2
int b;
}
}
if we looked up the DeclContext for block 2, we'd find the block
containing the abstract origin of b, and lookup would proceed
correctly because we'd see b and a. However, in the situation
{ // block 1
int a;
{ // block 2
}
}
since there isn't anything to look up in block 2, we can't determine
its abstract origin (and there is no such pointer in the DWARF for
blocks). However, we can walk up the parent chain and find a, and its
abstract origin lives in the abstract origin of block 1. So we simply
say that the DeclContext for block 2 is the same as the DeclContext
for block 1, which contains a. Lookups will return the same results.
Thanks to Jim Ingham for review and suggestions.
Differential revision: https://reviews.llvm.org/D32375
llvm-svn: 301263
Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
The test fails because an older clang did not emit the required debug
info (I am not sure when this got added, but clang-3.7 certainly did not
work yet). The actual platform has nothing to do with this.
llvm-svn: 300834
I thought my previous commit got the last ones but somehow I missed
these. This also resurrects TestDataFormatterLibcxxSet, which got
commented out in r263859 as a part of some seemingly unrelated change.
llvm-svn: 300833
Clang rejects __attribute__((regparm)) when targetting arm. The default
calling convention passes arguments in registers anyway, so we can just
remove them in this case.
llvm-svn: 300670
r285226 dropped the code that did these checks. I am pretty
sure that was inadvertent, so I added that back in and added
a test for it.
<rdar://problem/31661252>
llvm-svn: 300564
Summary:
The iteration list through the available data formatters was undefined,
which meant that the vector<bool> formatter kicked in only in cases
where it happened to be queried before the general vector formatter. To
fix this, I merge the two data formatter entries into one, and select
which implementation to use in the factory function.
Reviewers: jasonmolenda, tberghammer, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31880
llvm-svn: 300047
gcc emits DW_LANG_C89 even if we specify -std=c99 during compilation.
Since this isn't an lldb bug, but just the way the compiler happens to
be implemented, I teach the test to expect this situation correctly.
llvm-svn: 300046
Pavel Labath