This was ignoring the memory size, and producing multiple loads/stores
if the operand size was different from the memory size.
I assume this is the intent of not having an explicit G_ANYEXTLOAD
(although I think that would probably be better).
llvm-svn: 352523
This adds support for legalizing G_FLOG into a RTLib call.
It adds a legalizer test, and updates the existing floating point tests.
https://reviews.llvm.org/D57347
llvm-svn: 352429
This adds instruction selection support for @llvm.log10 in AArch64. It teaches
GISel to lower it to a library call, updates the relevant tests, and adds a
legalizer test for log10.
https://reviews.llvm.org/D57341
llvm-svn: 352418
This contains all of the legalizer changes from D57197 necessary to select
G_FCOS and G_FSIN. It also updates several existing IR tests in
test/CodeGen/AArch64 that verify that we correctly lower the G_FCOS and G_FSIN
instructions.
https://reviews.llvm.org/D57197
3/3
llvm-svn: 352402
Lower G_USUBO and G_USUBE. Add narrowScalar for G_SUB.
Legalize and select G_SUB for MIPS 32.
Differential Revision: https://reviews.llvm.org/D53416
llvm-svn: 352351
This patch adds support for vector @llvm.ceil intrinsics when full 16 bit
floating point support isn't available.
To do this, this patch...
- Implements basic isel for G_UNMERGE_VALUES
- Teaches the legalizer about 16 bit floats
- Teaches AArch64RegisterBankInfo to respect floating point registers on
G_BUILD_VECTOR and G_UNMERGE_VALUES
- Teaches selectCopy about 16-bit floating point vectors
It also adds
- A legalizer test for the 16-bit vector ceil which verifies that we create a
G_UNMERGE_VALUES and G_BUILD_VECTOR when full fp16 isn't supported
- An instruction selection test which makes sure we lower to G_FCEIL when
full fp16 is supported
- A test for selecting G_UNMERGE_VALUES
And also updates arm64-vfloatintrinsics.ll to show that the new ceiling types
work as expected.
https://reviews.llvm.org/D56682
llvm-svn: 352113
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
llvm-svn: 351882
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
This adds support for widening G_FCEIL in LegalizerHelper and
AArch64LegalizerInfo. More specifically, it teaches the AArch64 legalizer to
widen G_FCEIL from a 16-bit float to a 32-bit float when the subtarget doesn't
support full FP 16.
This also updates AArch64/f16-instructions.ll to show that we perform the
correct transformation.
llvm-svn: 349927
Add support for s64 libcalls for G_SDIV, G_UDIV, G_SREM and G_UREM
and use integer type of correct size when creating arguments for
CLI.lowerCall.
Select G_SDIV, G_UDIV, G_SREM and G_UREM for types s8, s16, s32 and s64
on MIPS32.
Differential Revision: https://reviews.llvm.org/D55651
llvm-svn: 349499
Add narrowScalar for G_AND and G_XOR.
Legalize G_AND G_OR and G_XOR for types other then s32
with clampScalar on MIPS32.
Differential Revision: https://reviews.llvm.org/D55362
llvm-svn: 349475
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
This reverts commit d1341152d91398e9a882ba2ee924147ea2f9b589.
This patch originally made use of Nested MachineIRBuilder buildInstr
calls, and since order of argument processing is not well defined, the
instructions were built slightly in a different order (still correct).
I've removed the nested buildInstr calls to have a defined order now.
Patch was tested by Mikael.
llvm-svn: 340309
Before we were relying on the any extend of the s1 to s32, but
for AAPCS we need to zero-extend it to at least s8.
Fixes PR36719
Differential Revision: https://reviews.llvm.org/D47425
llvm-svn: 333747
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
The second source operand of G_SHL, G_ASHR, and G_LSHR must preserve its
value as a (small) unsigned integer, therefore its incorrect to widen it
in any way but by zero extending it.
G_SHL was using G_ANYEXT and G_ASHR - G_SEXT (which is correct for their
destination and first source operands, but not the "number of bits to
shift" operand).
Generally, shifts aren't as similar to regular binary operations as it
might seem, for instance, they aren't commutative nor associative and
the second source operand usually requires a special treatment.
Reviewers: bogner, javed.absar, aivchenk, rovka
Reviewed By: bogner
Subscribers: igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46413
llvm-svn: 331926
Refactoring LegalizerHelper::widenScalar member function reducing its
size by approximately a factor of 2 and (hopefuly) making it more
straightforward and regular by introducing widenScalarSrc and
widenScalarDst helper methods.
The new widenScalar* methods mutate the instructions in place instead
of recreating them from scratch and removing the originals. The
compile time implications of this were measured on sqlite3
amalgamation, targeting AArch64 in -O0:
LegalizerHelper::widenScalar: > 25% faster
Legalizer::runOnMachineFunction: ~ 4.0 - 4.5% faster
Also adding MachineOperand::setCImm and refactoring out
MachineIRBuilder::recordInsertion methods to make the change possible.
Reviewers: aditya_nandakumar, bogner, javed.absar, t.p.northover, ab, dsanders, arsenm
Reviewed By: aditya_nandakumar
Subscribers: wdng, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46414
llvm-svn: 331819
There are two separate fixes here:
* The lowering code for non-extending loads should report UnableToLegalize instead of emitting the same instruction.
* The target should not be requesting lowering of non-extending loads.
llvm-svn: 331201
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch begins changing the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
This patch introduces the new generic instructions and new variation on
G_LOAD and adds lowering for them to convert back to the existing
representations.
Depends on D45466
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, aemerson, javed.absar
Reviewed By: aemerson
Subscribers: aemerson, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45540
llvm-svn: 331115
Summary:
Currently only the memory size is supported but others can be added as
needed.
narrowScalar for G_LOAD and G_STORE now correctly update the
MachineMemOperand and will refuse to legalize atomics since those need more
careful expansions to maintain atomicity.
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, aemerson, javed.absar
Reviewed By: aemerson
Subscribers: aemerson, rovka, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45466
llvm-svn: 331071
Summary:
This patch adds templated functions to MachineIRBuilder for some opcodes
and adds pattern matcher support for G_AND and G_OR.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D43309
llvm-svn: 325162
Until we support extending loads properly we're going to fall back for these.
We already handle stores in the same way, so this is just being consistent.
llvm-svn: 324001
Legal if we have hardware support for floating point, libcalls
otherwise.
Also add the necessary support for libcalls in the legalizer helper.
llvm-svn: 323726
Summary:
The improvements to the LegalizerInfo discussed in D42244 require that
LegalizerInfo::LegalizeAction be available for use in other classes. As such,
it needs to be moved out of LegalizerInfo. This has been done separately to the
next patch to minimize the noise in that patch.
llvm-svn: 323669
We weren't converting the immediate ConstantFP during legalization, which caused
the wrong bit patterns to be emitted for half type FP constants.
Fixes PR36106.
llvm-svn: 323582
Summary:
`getAction(const InstrAspect &) const` breaks encapsulation by exposing
the smaller components that are used to decide how to legalize an
instruction.
This is a problem because we need to change the implementation of
LegalizerInfo so that it's able to describe particular type combinations
rather than just cartesian products of types.
For example, declaring the following
setAction({..., 0, s32}, Legal)
setAction({..., 0, s64}, Legal)
setAction({..., 1, s32}, Legal)
setAction({..., 1, s64}, Legal)
currently declares these type combinations as legal:
{s32, s32}
{s64, s32}
{s32, s64}
{s64, s64}
but we currently have no means to say that, for example, {s64, s32} is
not legal. Some operations such as G_INSERT/G_EXTRACT/G_MERGE_VALUES/
G_UNMERGE_VALUES has relationships between the types that are currently
described incorrectly.
Additionally, G_LOAD/G_STORE currently have no means to legalize non-atomics
differently to atomics. The necessary information is in the MMO but we have no
way to use this in the legalizer. Similarly, there is currently no way for the
register type and the memory type to differ so there is no way to cleanly
represent extending-load/truncating-store in a way that can't be broken by
optimizers (resulting in illegal MIR).
This patch introduces LegalityQuery which provides all the information
needed by the legalizer to make a decision on whether something is legal
and how to legalize it.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar, volkan, reames, bogner
Reviewed By: bogner
Subscribers: bogner, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D42244
llvm-svn: 323342
Mark G_FPEXT and G_FPTRUNC as legal or libcall, depending on hardware
support, but only for conversions between float and double.
Also add the necessary boilerplate so that the LegalizerHelper can
introduce the required libcalls. This also works only for float and
double, but isn't too difficult to extend when the need arises.
llvm-svn: 322651
For hard float with VFP4, it is legal. Otherwise, we use libcalls.
This needs a bit of support in the LegalizerHelper for soft float
because we didn't handle G_FMA libcalls yet. The support is trivial, as
the only difference between G_FMA and other libcalls that we already
handle is that it has 3 input operands rather than just 2.
llvm-svn: 322366
Previously the code for handling G_SMULO didn't properly check for the signed
multiply overflow, instead treating it the same as the unsigned G_UMULO.
Fixes PR35800.
llvm-svn: 321690
G_ATOMICRMW_* is generally legal on AArch64. The exception is G_ATOMICRMW_NAND.
G_ATOMIC_CMPXCHG_WITH_SUCCESS needs to be lowered to G_ATOMIC_CMPXCHG with an
external comparison.
Note that IRTranslator doesn't generate these instructions yet.
llvm-svn: 319466
TableGen already generates code for selecting a G_FDIV, so we only need
to add a test.
For the legalizer and reg bank select, we do the same thing as for the
other floating point binary operations: either mark as legal if we have
a FP unit or lower to a libcall, and map to the floating point
registers.
llvm-svn: 318915
TableGen already generates code for selecting a G_FMUL, so we only need
to add a test for that part.
For the legalizer and reg bank select, we do the same thing as the other
floating point binary operators: either mark as legal if we have a FP
unit or lower to a libcall, and map to the floating point registers.
llvm-svn: 318910
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
llvm-svn: 317560
Since the lambda isn't escaped (via a std::function or similar) it's
fine/better to use default capture-by-ref to provide semantics similar
to language-level nested scopes (if/for/while/etc).
llvm-svn: 311782
Treat widening G_SREM and G_UREM the same as G_SDIV and G_UDIV. This is
going to be used in the ARM backend (and that's when the test will come
too).
llvm-svn: 308278
This covers both hard and soft float.
Hard float is easy, since it's just Legal.
Soft float is more involved, because there are several different ways to
handle it based on the predicate: one and ueq need not only one, but two
libcalls to get a result. Furthermore, we have large differences between
the values returned by the AEABI and GNU functions.
AEABI functions return a nice 1 or 0 representing true and respectively
false. GNU functions generally return a value that needs to be compared
against 0 (e.g. for ogt, the value returned by the libcall is > 0 for
true). We could introduce redundant comparisons for AEABI as well, but
they don't seem easy to remove afterwards, so we do different processing
based on whether or not the result really needs to be compared against
something (and just truncate if it doesn't).
llvm-svn: 307243
We used to have a helper that replaced an instruction with a libcall.
That turns out to be too aggressive, since sometimes we need to replace
the instruction with at least two libcalls. Therefore, change our
existing helper to only create the libcall and leave the instruction
removal as a separate step. Also rename the helper accordingly.
llvm-svn: 307149
It looks like there are two target-independent but not GISel instructions that
need legalization, IMPLICIT_DEF and PHI. These are already anomalies since
their operands have important LLTs attached, so to make things more uniform it
seems like a good idea to add generic variants. Starting with G_IMPLICIT_DEF.
llvm-svn: 306875
Add support for modulo for targets that have hardware division and for
those that don't. When hardware division is not available, we have to
choose the correct libcall to use. This is generally straightforward,
except for AEABI.
The AEABI variant is trickier than the other libcalls because it
returns { quotient, remainder }, instead of just one value like the
other libcalls that we've seen so far. Therefore, we need to use custom
lowering for it. However, we don't want to have too much special code,
so we refactor the target-independent code in the legalizer by adding a
helper for replacing an instruction with a libcall. This helper is used
by the legalizer itself when dealing with simple calls, and also by the
custom ARM legalization for the more complicated AEABI divmod calls.
llvm-svn: 305459
Summary:
When legalizing G_LOAD/G_STORE using NarrowScalar, we should avoid emitting
%0 = G_CONSTANT ty 0
%1 = G_GEP %x, %0
since it's cheaper to not emit the redundant instructions than it is to fold them
away later.
Reviewers: qcolombet, t.p.northover, ab, rovka, aditya_nandakumar, kristof.beyls
Reviewed By: qcolombet
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32746
llvm-svn: 305340
Treat them the same as the other binary operations that we have so far,
but on integers rather than floating point types. Extract the common
code into a helper.
This will be used in the ARM backend.
llvm-svn: 301163
Use the same handling in the generic legalizer code as for the other
libcalls (G_FREM, G_FPOW).
Enable it on ARM for float and double so we can test it.
llvm-svn: 299931
The original instruction might get legalized and erased and expanded
into intermediate instructions and the intermediate instructions might
fail legalization. This end up in reporting GISelFailure on the erased
instruction.
Instead report GISelFailure on the intermediate instruction which failed
legalization.
Reviewed by: ab
llvm-svn: 299802
A bool is represented by a single byte, which the ARM ABI requires to be either
0 or 1. So we cannot use G_ANYEXT when legalizing the type.
llvm-svn: 298439
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
Summary: No test case as none of the in-tree targets with GlobalISel support has this condition.
Reviewers: qcolombet, aditya_nandakumar, dsanders, t.p.northover, ab
Reviewed By: qcolombet
Subscribers: dberris, rovka, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D30786
llvm-svn: 297512
Summary:
We don’t actually use LegalizerInfo in Legalizer pass, it’s just passed
as an argument.
In order to check if an instruction is legal or not, we need to get LegalizerInfo
by calling `MI.getParent()->getParent()->getSubtarget().getLegalizerInfo()`.
Instead, make LegalizerInfo accessible in LegalizerHelper.
Reviewers: qcolombet, aditya_nandakumar, dsanders, ab, t.p.northover, kristof.beyls
Reviewed By: qcolombet
Subscribers: dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D30838
llvm-svn: 297491
We were calculating incorrect extract/insert offsets by trying to be too
tricksy with min/max. It's clearer to just split the logic up into "register
starts before this segment" vs "after".
llvm-svn: 297226
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
Now that G_INSERT instructions can only insert one register, this code was
overly general. In another direction it didn't handle registers that crossed
split boundaries properly, which needed to be fixed.
llvm-svn: 297042
These are simplified variants of the current G_SEQUENCE and G_EXTRACT, which
assume the individual parts will be contiguous, homogeneous, and occupy the
entirity of the larger register. This makes reasoning about them much easer
since you only have to look at the first register being merged and the result
to know what the instruction is doing.
I intend to gradually replace all uses of the more complicated sequence/extract
with these (or single-element insert/extracts), and then remove the older
variants. For now we start with legalization.
llvm-svn: 296921
Uses a Custom implementation because the slot sizes being a multiple of the
pointer size isn't really universal, even for the architectures that do have a
simple "void *" va_list.
llvm-svn: 295255
AArch64 has specific instructions to multiply two numbers at double the width
and produce the high part of the result. These can be used to implement LLVM's
mul.with.overflow instructions fairly simply. Helps with C++ operator new[].
llvm-svn: 294519
We don't handle all cases yet (see arm64-fallback.ll for an example), but this
is enough to cover most common C++ code so it's a good place to start.
llvm-svn: 294247
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
Matt Arsenault