There are a couple left in bool-like containers (BitVector, etc) where
the implicit conversions seem more suitable - though it might be worth
considering explicitifying those too.
llvm-svn: 291694
Now we only support returning Optional<> values and have changed all clients over to use Optional::getValueOr().
Differential Revision: https://reviews.llvm.org/D28569
llvm-svn: 291686
Summary:
Revert LowerTypeTests: Split the pass in two: a resolution phase and a lowering phase.
This change separates how type identifiers are resolved from how intrinsic
calls are lowered. All information required to lower an intrinsic call
is stored in a new TypeIdLowering data structure. The idea is that this
data structure can either be initialized using the module itself during
regular LTO, or using the module summary in ThinLTO backends.
Original URL: https://reviews.llvm.org/D28341
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D28532
llvm-svn: 291684
Decompressor intention is to reduce duplication of code.
Currently LLD has own implementation of decompressor
for compressed debug sections.
This class helps to avoid it and share the code.
LLD patch for reusing it is D28106
Differential revision: https://reviews.llvm.org/D28105
llvm-svn: 291675
Here's my second try at making @llvm.assume processing more efficient. My
previous attempt, which leveraged operand bundles, r289755, didn't end up
working: it did make assume processing more efficient but eliminating the
assumption cache made ephemeral value computation too expensive. This is a
more-targeted change. We'll keep the assumption cache, but extend it to keep a
map of affected values (i.e. values about which an assumption might provide
some information) to the corresponding assumption intrinsics. This allows
ValueTracking and LVI to find assumptions relevant to the value being queried
without scanning all assumptions in the function. The fact that ValueTracking
started doing O(number of assumptions in the function) work, for every
known-bits query, has become prohibitively expensive in some cases.
As discussed during the review, this is a pragmatic fix that, longer term, will
likely be replaced by a more-principled solution (perhaps based on an extended
SSA form).
Differential Revision: https://reviews.llvm.org/D28459
llvm-svn: 291671
the latter to the Transforms library.
While the loop PM uses an analysis to form the IR units, the current
plan is to have the PM itself establish and enforce both loop simplified
form and LCSSA. This would be a layering violation in the analysis
library.
Fundamentally, the idea behind the loop PM is to *transform* loops in
addition to running passes over them, so it really seemed like the most
natural place to sink this was into the transforms library.
We can't just move *everything* because we also have loop analyses that
rely on a subset of the invariants. So this patch splits the the loop
infrastructure into the analysis management that has to be part of the
analysis library, and the transform-aware pass manager.
This also required splitting the loop analyses' printer passes out to
the transforms library, which makes sense to me as running these will
transform the code into LCSSA in theory.
I haven't split the unittest though because testing one component
without the other seems nearly intractable.
Differential Revision: https://reviews.llvm.org/D28452
llvm-svn: 291662
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
Summary:
In this change we move the definition of the log reading routines from
the tools directory in LLVM to {include/llvm,lib}/XRay. We improve the
documentation a little bit for the publicly accessible headers, and
adjust the top-matter. This also leads to some refactoring and cleanup
in the tooling code.
In particular, we do the following:
- Rename the class from LogReader to Trace, as it better represents
the logical set of records as opposed to a log.
- Use file type detection instead of asking the user to say what
format the input file is. This allows us to keep the interface
simple and encapsulate the logic of loading the data appropriately.
In future changes we increase the API surface and write dedicated unit
tests for the XRay library.
Depends on D24376.
Reviewers: dblaikie, echristo
Subscribers: mehdi_amini, mgorny, llvm-commits, varno
Differential Revision: https://reviews.llvm.org/D28345
llvm-svn: 291652
arguments much like the CGSCC pass manager.
This is a major redesign following the pattern establish for the CGSCC layer to
support updates to the set of loops during the traversal of the loop nest and
to support invalidation of analyses.
An additional significant burden in the loop PM is that so many passes require
access to a large number of function analyses. Manually ensuring these are
cached, available, and preserved has been a long-standing burden in LLVM even
with the help of the automatic scheduling in the old pass manager. And it made
the new pass manager extremely unweildy. With this design, we can package the
common analyses up while in a function pass and make them immediately available
to all the loop passes. While in some cases this is unnecessary, I think the
simplicity afforded is worth it.
This does not (yet) address loop simplified form or LCSSA form, but those are
the next things on my radar and I have a clear plan for them.
While the patch is very large, most of it is either mechanically updating loop
passes to the new API or the new testing for the loop PM. The code for it is
reasonably compact.
I have not yet updated all of the loop passes to correctly leverage the update
mechanisms demonstrated in the unittests. I'll do that in follow-up patches
along with improved FileCheck tests for those passes that ensure things work in
more realistic scenarios. In many cases, there isn't much we can do with these
until the loop simplified form and LCSSA form are in place.
Differential Revision: https://reviews.llvm.org/D28292
llvm-svn: 291651
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This creates a centralized class in which to store type records.
It stores types as an array of entries, which matches the
notion of a type stream being a topologically sorted DAG.
Logic to build up such a database was already being used in
CVTypeDumper, so CVTypeDumper is now updated to to read from
a TypeDatabase which is filled out by an earlier visitor in
the pipeline.
Differential Revision: https://reviews.llvm.org/D28486
llvm-svn: 291626
This patch reverts r291588: [PGO] Turn off comdat renaming in IR PGO by default,
as we are seeing some hash mismatches in our internal tests.
llvm-svn: 291621
Summary:
Previously if you had
* a function with the fast-math-enabled attr, followed by
* a function without the fast-math attr,
the second function would inherit the first function's fast-math-ness.
This means that mixing fast-math and non-fast-math functions in a module
was completely broken unless you explicitly annotated every
non-fast-math function with "unsafe-fp-math"="false". This appears to
have been broken since r176986 (March 2013), when the resetTargetOptions
function was introduced.
This patch tests the correct behavior as best we can. I don't think I
can test FPDenormalMode and NoTrappingFPMath, because they aren't used
in any backends during function lowering. Surprisingly, I also can't
find any uses at all of LessPreciseFPMAD affecting generated code.
The NVPTX/fast-math.ll test changes are an expected result of fixing
this bug. When FMA is disabled, we emit add as "add.rn.f32", which
prevents fma combining. Before this patch, fast-math was enabled in all
functions following the one which explicitly enabled it on itself, so we
were emitting plain "add.f32" where we should have generated
"add.rn.f32".
Reviewers: mkuper
Subscribers: hfinkel, majnemer, jholewinski, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28507
llvm-svn: 291618
Move the code to update LoopInfo for cloned basic blocks to
addClonedBlockToLoopInfo, as suggested in
https://reviews.llvm.org/D28482.
llvm-svn: 291614
Summary:
Convention wisdom says that bytes in Function are precious, and the
vast, vast majority of globals do not live in special sections. Even
when they do, they tend to live in the same section. Store the section
name on the LLVMContext in a StringSet, and maintain a map from
GlobalObject* to section name like we do for metadata, prefix data, etc.
The fact that we've survived this long wasting at least three pointers
of space in Function suggests that Function bytes are perhaps not as
precious as we once thought. Given that most functions have metadata
attachments when debug info is enabled, we might consider adding a
pointer here to make that access more efficient.
Reviewers: jlebar, dexonsmith, mehdi_amini
Subscribers: mehdi_amini, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D28150
llvm-svn: 291613
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
Support for DW_FORM_implicit_const DWARFv5 feature.
When this form is used attribute value goes to .debug_abbrev section (as SLEB).
As this form would break any debug tool which doesn't support DWARFv5
it is guarded by dwarf version check. Attempt to use this form with
dwarf version <= 4 is considered a fatal error.
Differential Revision: https://reviews.llvm.org/D28456
llvm-svn: 291599
Summary:
In IR PGO we append the function hash to comdat functions to avoid the
potential hash mismatch. This turns out not legal in some cases: if the comdat
function is address-taken and used in comparison. Renaming changes the semantic.
This patch turns off comdat renaming by default.
To alleviate the hash mismatch issue, we now rename the profile variable
for comdat functions. Profile allows co-existing multiple versions of profiles
with different hash value. The inlined copy will always has the correct profile
counter. The out-of-line copy might not have the correct count. But we will
not have the bogus mismatch warning.
Reviewers: davidxl
Subscribers: llvm-commits, xur
Differential Revision: https://reviews.llvm.org/D28416
llvm-svn: 291588
One more try... relanding r291541 with a fix to properly gate MaxOpsPerInst on DWARF version.
Description from r291541:
This patch re-lands r291470, which failed on Linux bots. The issue (I believe) was undefined behavior because the size of llvm::dwarf::LineNumberOps was not explcitly specified or consistently respected. The updated patch adds an explcit underlying type to the enum and preserves the size more correctly.
Original description:
This patch adds support for the DWARF debug_lines section. The line table state machine opcodes are preserved, so this can be used to test the state machine evaluation directly.
llvm-svn: 291546
This patch re-lands r291470, which failed on Linux bots. The issue (I believe) was undefined behavior because the size of llvm::dwarf::LineNumberOps was not explcitly specified or consistently respected. The updated patch adds an explcit underlying type to the enum and preserves the size more correctly.
Original description:
This patch adds support for the DWARF debug_lines section. The line table state machine opcodes are preserved, so this can be used to test the state machine evaluation directly.
llvm-svn: 291541
In some cases StructurizeCfg updates root node, but dominator info
remains unchanges, it causes crash when expensive checks are enabled.
To cope with this problem a new method was added to DominatorTreeBase
that allows adding new root nodes, it is called in StructurizeCfg to
put dominator tree in sync.
This change fixes PR27488.
Differential Revision: https://reviews.llvm.org/D28114
llvm-svn: 291530
It was complaining about ambiguity between llvm::detail and
llvm::support::detail:
error C2872: 'detail': ambiguous symbol
note: could be 'llvm::detail'
note: or 'llvm::support::detail'
Standardize on llvm::support::detail to hide these symbols further.
llvm-svn: 291519
Use constexpr recursion for alignof like we do for sizeof. Seems to work
with Clang and MSVC. Also, don't recurse twice to avoid slowdowns in
compilers that don't memoize constexpr results (Clang).
llvm-svn: 291514
This patch uses C++11 parameter packs and constexpr functions
to allow AlignedCharArrayUnion to hold an arbitrary number of
types.
Differential Revision: https://reviews.llvm.org/D28429
llvm-svn: 291503
When writing to a non regular file we cannot rename to it. Since we
have to write, we may as well create a temporary file to avoid trying
to create an unique file in /dev when trying to write to /dev/null.
llvm-svn: 291485
This patch adds support for the DWARF debug_lines section. The line table state machine opcodes are preserved, so this can be used to test the state machine evaluation directly.
llvm-svn: 291470
invalid.
This fixes use-after-free bugs that will arise with any interesting use
of SCEV.
I've added a dedicated test that works diligently to trigger these kinds
of bugs in the new pass manager and also checks for them explicitly as
well as triggering ASan failures when things go squirly.
llvm-svn: 291426
handlers, make abandonPendingResults public API.
This should make installing asynchronous result handlers thread safe.
The abandonPendingResults method is made public so that clients can disconnect
from a remote even if they have asynchronous handlers awaing results from that
remote. The asynchronous handlers will all receive "abandoned result" errors as
their argument.
llvm-svn: 291399
APICalls allows groups of functions to be composed into an API that can be
registered as a unit with an RPC endpoint. Doing registration on a-whole API
basis (rather than per-function) allows missing API functions to be detected
early.
APICalls also allows Function membership to be tested at compile-time. This
allows clients to write static assertions that functions to be called are
members of registered APIs.
llvm-svn: 291380
This brings MultiThreadedRPCEndpoint's addHandler API in-line with
SingleThreadedRPCEndpoint's.
This will be tested in an up-coming unit-test for MultiThreadedRPCEndpoint.
llvm-svn: 291376
Rong Xu