At the point the outliner runs, KILLs don't impact anything, but they're still
considered unique instructions. This commit makes them invisible like
DebugValues so that they can still be outlined without impacting outlining
decisions.
llvm-svn: 327760
This feature enables special handling of cheap as move in the existing
custom handling specifically for Exynos processors.
Differential revision: https://reviews.llvm.org/D42387
llvm-svn: 323774
The Large System Extension added an atomic compare-and-swap instruction
that operates on a pair of 64-bit registers, which we can use to
implement a 128-bit cmpxchg.
Because i128 is not a legal type for AArch64 we have to do all of the
instruction selection in C++, and the instruction requires even/odd
register pairs, so we have to wrap it in REG_SEQUENCE and EXTRACT_SUBREG
nodes. This is very similar to what we do for 64-bit cmpxchg in the ARM
backend.
Differential revision: https://reviews.llvm.org/D42104
llvm-svn: 323634
*Mostly* NFC. Still updating the test though just for completeness.
This moves the hasAddressTaken check to MachineOutliner.cpp and replaces it
with a per-basic block test rather than a per-function test. The old test was
too conservative and was preventing functions in C programs from being
outlined even though they were safe to outline.
This was mostly a problem in C sources.
llvm-svn: 322425
ADRP instructions weren't being outlined because they're PC-relative and thus
fail the LR checks. This patch adds a special case for ADRPs to
getOutliningType to make sure that ADRPs can be outlined and updates the MIR
test.
llvm-svn: 322207
This commit does two things. Firstly, it adds a collection of flags which can
be passed along to the target to encode information about the MBB that an
instruction lives in to the outliner.
Second, it adds some of those flags to the AArch64 outliner in order to add
more stack instructions to the list of legal instructions that are handled
by the outliner. The two flags added check if
- There are calls in the MachineBasicBlock containing the instruction
- The link register is available in the entire block
If the link register is available and there are no calls, then a stack
instruction can always be outlined without fixups, regardless of what it is,
since in this case, the outliner will never modify the stack to create a
call or outlined frame.
The motivation for doing this was checking which instructions are most often
missed by the outliner. Instructions like, say
%sp<def> = ADDXri %sp, 32, 0; flags: FrameDestroy
are very common, but cannot be outlined in the case that the outliner might
modify the stack. This commit allows us to outline instructions like this.
llvm-svn: 322048
r319980 added new patterns to the machine combiner for transforming (fsub (fmul
x y) z) into (fmla (fneg z) x y). That is, fsub's where the first source
operand is an fmul are transformed. We previously only matched the case where
the second source operand of an fsub was an fmul, transforming (fsub z (fmul x
y)) into (fmls z x y). Now, if we have an fsub where both source operands are
fmuls, both of the above patterns are applicable.
However, the order in which we add the patterns to the list of candidates
determines the transformation that takes place, since only the first pattern
that matches will be used. This patch changes the order these two patterns are
added to the list of candidates such that we prefer the case where the second
source operand is an fmul (the fmls case), rather than the other one (the
fmla/fneg case). When both source operands are fmuls, this ordering results in
fewer instructions.
Differential Revision: https://reviews.llvm.org/D41587
llvm-svn: 321491
LR was undefined entering outlined functions that contain calls. This made the
machine verifier unhappy when expensive checks were enabled. This fixes that.
llvm-svn: 321014
Work towards the unification of MIR and debug output by printing
`%stack.0` instead of `<fi#0>`, and `%fixed-stack.0` instead of
`<fi#-4>` (supposing there are 4 fixed stack objects).
Only debug syntax is affected.
Differential Revision: https://reviews.llvm.org/D41027
llvm-svn: 320827
The outliner previously would never outline calls. Calls are pretty common in
files, so it makes sense to outline them. In fact, in the LLVM test suite, if
you count the number of instructions that the outliner misses when you outline
calls vs when you don't, it turns out that, on average, around 6% of the
instructions encountered are calls. So, if we outline calls, we can find more
candidates, and thus save some more space.
This commit adds that functionality and updates the mir test to reflect that.
llvm-svn: 320229
The offset overflow check before was incorrect. It would always give the
correct result, but it was comparing the SCALED potential fixed-up offset
against an UNSCALED minimum/maximum. As a result, the outliner was missing a
bunch of frame setup/destroy instructions that ought to have been safe to
outline. This fixes that, and adds an instruction to the .mir test that
failed the old test.
llvm-svn: 320090
Summary:
This patch adds MachineCombiner patterns for transforming
(fsub (fmul x y) z) into (fma x y (fneg z)). This has a lower
latency on micro architectures where fneg is cheap.
Patch based on work by George Steed.
Reviewers: rengolin, joelkevinjones, joel_k_jones, evandro, efriedma
Reviewed By: evandro
Subscribers: aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40306
llvm-svn: 319980
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
If the address of a local is used in a comparison, AArch64 can fold the
address-calculation into the comparison via "adds". Unfortunately, a couple of
places (both hit in this one test) are not ready to deal with that yet and just
assume the first source operand is a register.
llvm-svn: 316035
Say you have two identical linkonceodr functions, one in M1 and one in M2.
Say that the outliner outlines A,B,C from one function, and D,E,F from another
function (where letters are instructions). Now those functions are not
identical, and cannot be deduped. Locally to M1 and M2, these outlining
choices would be good-- to the whole program, however, this might not be true!
To mitigate this, this commit makes it so that the outliner sees linkonceodr
functions as unsafe to outline from. It also adds a flag,
-enable-linkonceodr-outlining, which allows the user to specify that they
want to outline from such functions when they know what they're doing.
Changing this handles most code size regressions in the test suite caused by
competing with linker dedupe. It also doesn't have a huge impact on the code
size improvements from the outliner. There are 6 tests that regress > 5% from
outlining WITH linkonceodrs to outlining WITHOUT linkonceodrs. Overall, most
tests either improve or are not impacted.
Not outlined vs outlined without linkonceodrs:
https://hastebin.com/raw/qeguxavuda
Not outlined vs outlined with linkonceodrs:
https://hastebin.com/raw/edepoqoqic
Outlined with linkonceodrs vs outlined without linkonceodrs:
https://hastebin.com/raw/awiqifiheb
Numbers generated using compare.py with -m size.__text. Tests run for AArch64
with -Oz -mllvm -enable-machine-outliner -mno-red-zone.
llvm-svn: 315136
This commit allows the outliner to avoid saving and restoring the link register
on AArch64 when it is dead within an entire class of candidates.
This introduces changes to the way the outliner interfaces with the target.
For example, the target now interfaces with the outliner using a
MachineOutlinerInfo struct rather than by using getOutliningCallOverhead and
getOutliningFrameOverhead.
This also improves several comments on the outliner's cost model.
https://reviews.llvm.org/D36721
llvm-svn: 314341
MachineScheduler when clustering loads or stores checks if base
pointers point to the same memory. This check is done through
comparison of base registers of two memory instructions. This
works fine when instructions have separate offset operand. If
they require a full calculated pointer such instructions can
never be clustered according to such logic.
Changed shouldClusterMemOps to accept base registers as well and
let it decide what to do about it.
Differential Revision: https://reviews.llvm.org/D37698
llvm-svn: 313208
Add new predicate to more accurately model the cost of arithmetic and
logical operations shifted left.
Differential revision: https://reviews.llvm.org/D37151
llvm-svn: 311943
Instead of loading 0 from a constant pool, it's of course much better to
materialize it using an fmov and the zero register.
Thanks to Ahmed Bougacha for the suggestion.
Differential Revision: https://reviews.llvm.org/D37102
llvm-svn: 311662
Before, the outliner would mark all instructions that read from/modify LR as
illegal. This doesn't handle W30, which overlaps with LR. This shouldn't be
outlined.
This commit fixes that by making modifiesRegister() and readsRegister() look at
W30 + take in a TRI argument. This makes sure that modifiesRegister() and
readsRegister() won't outline either of W30 and LR.
https://reviews.llvm.org/D36435
llvm-svn: 310422
This commit
- Removes IsTailCall and replaces it with a target-defined unsigned
- Refactors getOutliningCallOverhead and getOutliningFrameOverhead so that they don't use IsTailCall
- Adds a call class + frame class classification to OutlinedFunction and Candidate respectively
This accomplishes a couple things.
Firstly, we don't need the notion of *tail call* in the general outlining algorithm.
Secondly, we now can have different "outlining classes" for each candidate within a set of candidates.
This will make it easy to add new ways to outline sequences for certain targets and dynamically choose
an appropriate cost model for a sequence depending on the context that that sequence lives in.
Ultimately, this should get us closer to being able to do something like, say avoid saving the link
register when outlining AArch64 instructions.
llvm-svn: 309475
This is some more cleanup in preparation for some actual
functional changes. This splits getOutliningBenefit into
two cost functions: getOutliningCallOverhead and
getOutliningFrameOverhead. These functions return the
number of instructions that would be required to call
a specific function and the number of instructions
that would be required to construct a frame for a
specific funtion. The actual outlining benefit logic
is moved into the outliner, which calls these functions.
The goal of refactoring getOutliningBenefit is to:
- Get us closer to getting rid of the IsTailCall flag
- Further split up "target-specific" things and
"general algorithm" things
llvm-svn: 309356
Summary:
This patch is the first step in reducing HW prefetcher instruction tag
collisions in inner loops for Falkor. It adds a pass that annotates IR
loads with metadata to indicate that they are known to be strided loads,
and adds a target lowering hook that translates this metadata to a
target-specific MachineMemOperand flag.
A follow on change will use this MachineMemOperand flag to re-write
instructions to reduce tag collisions.
Reviewers: mcrosier, t.p.northover
Subscribers: aemerson, rengolin, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34963
llvm-svn: 308059
Summary: Add target hooks for printing and parsing target MMO flags.
Targets may override getSerializableMachineMemOperandTargetFlags() to
return a mapping from string to flag value for target MMO values that
should be serialized/parsed in MIR output.
Add implementation of this hook for AArch64 SuppressPair MMO flag.
Reviewers: bogner, hfinkel, qcolombet, MatzeB
Subscribers: mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D34962
llvm-svn: 307877
This patch contains a pass that transforms CBZ/CBNZ/TBZ/TBNZ instructions into a
conditional branch (Bcc), when the NZCV flags can be set for "free". This is
preferred on targets that have more flexibility when scheduling Bcc
instructions as compared to CBZ/CBNZ/TBZ/TBNZ (assuming all other variables are
equal). This can reduce register pressure and is also the default behavior for
GCC.
A few examples:
add w8, w0, w1 -> cmn w0, w1 ; CMN is an alias of ADDS.
cbz w8, .LBB_2 -> b.eq .LBB0_2 ; single def/use of w8 removed.
add w8, w0, w1 -> adds w8, w0, w1 ; w8 has multiple uses.
cbz w8, .LBB1_2 -> b.eq .LBB1_2
sub w8, w0, w1 -> subs w8, w0, w1 ; w8 has multiple uses.
tbz w8, #31, .LBB6_2 -> b.ge .LBB6_2
In looking at all current sub-target machine descriptions, this transformation
appears to be either positive or neutral.
Differential Revision: https://reviews.llvm.org/D34220.
llvm-svn: 306144
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
This concludes the refinements to Falkor Machine Model.
It includes SchedPredicates for immediate zero and LSL Fast.
Forwarding logic is also modeled for vector multiply and
accumulate only.
llvm-svn: 299810
Jessica Paquette