Commit Graph

36 Commits

Author SHA1 Message Date
Craig Topper 99e30e6a66 [AVX512] Use MOVZX32 instead of MOVZ16 for loading single v8/v4/v2/v1 masks when KMOVB is not available. This has better behavior with respect to partial register stalls since it won't need to preserve the upper 16-bits of the GPR.
llvm-svn: 272626
2016-06-14 03:13:00 +00:00
Craig Topper ddab395397 [AVX512] Add patterns for zero-extending a mask that use the def of KMOVW/KMOVB without going through an EXTRACT_SUBREG and a MOVZX.
llvm-svn: 272625
2016-06-14 03:12:54 +00:00
Craig Topper cbe54a4bd9 [AVX512] Add tests for zero extending masks that show an unnecessary movzx instruction. A followup patch will remove that instruction, but adding the tests first to make the more obvious.
llvm-svn: 272624
2016-06-14 03:12:48 +00:00
Ahmed Bougacha 04a8fc2e37 [X86] Teach X86FixupBWInsts to promote MOV8rr/MOV16rr to MOV32rr.
This re-applies r268760, reverted in r268794.
Fixes http://llvm.org/PR27670

The original imp-defs assertion was way overzealous: forward all
implicit operands, except imp-defs of the new super-reg def (r268787
for GR64, but also possible for GR16->GR32), or imp-uses of the new
super-reg use.
While there, mark the source use as Undef, and add an imp-use of the
old source reg: that should cover any case of dead super-regs.

At the stage the pass runs, flags are unlikely to matter anyway;
still, let's be as correct as possible.

Also add MIR tests for the various interesting cases.

Original commit message:
Codesize is less (16) or equal (8), and we avoid partial
dependencies.

Differential Revision: http://reviews.llvm.org/D19999

llvm-svn: 268831
2016-05-07 01:11:17 +00:00
Nico Weber 9b32b4fbee Revert r268760, it caused PR27670.
llvm-svn: 268794
2016-05-06 21:07:02 +00:00
Ahmed Bougacha 258426ca7a [X86] Teach X86FixupBWInsts to promote MOV8rr/MOV16rr to MOV32rr.
Codesize is less (16) or equal (8), and we avoid partial dependencies.

Differential Revision: http://reviews.llvm.org/D19999

llvm-svn: 268760
2016-05-06 17:42:57 +00:00
Matt Arsenault 629d12de70 DAGCombiner: Relax alignment restriction when changing load type
If the target allows the alignment, this should still be OK.

llvm-svn: 267209
2016-04-22 20:21:36 +00:00
Simon Pilgrim 82e54871d0 [DAGCombiner] Fold xor/and/or (bitcast(A), bitcast(B)) -> bitcast(op (A,B)) anytime before LegalizeVectorOprs
xor/and/or (bitcast(A), bitcast(B)) -> bitcast(op (A,B)) was only being combined at the AfterLegalizeTypes stage, this patch permits the combine to occur anytime before then as well.

The main aim with this to improve the ability to recognise bitmasks that can be converted to shuffles.

I had to modify a number of AVX512 mask tests as the basic bitcast to/from scalar pattern was being stripped out, preventing testing of the mmask bitops. By replacing the bitcasts with loads we can get almost the same result.

Differential Revision: http://reviews.llvm.org/D18944

llvm-svn: 265998
2016-04-11 21:10:33 +00:00
Elena Demikhovsky e99c561391 AVX-512: Truncating store for i1 vectors
Implemented truncstore for KNL and skylake-avx512.
Covered vectors from v2i1 to v64i1. We save the value in bits (not in bytes) - v32i1 is saved in 4 bytes.

Differential Revision: http://reviews.llvm.org/D18740

llvm-svn: 265283
2016-04-04 07:17:47 +00:00
Elena Demikhovsky 5e426f7356 AVX-512: Load and Extended Load for i1 vectors
Implemented load+{sign|zero}_extend for i1 vectors
Fixed failures in i1 vector load.
Covered loading of v2i1, v4i1, v8i1, v16i1, v32i1, v64i1 vectors for KNL and SKX.

Differential Revision: http://reviews.llvm.org/D18737

llvm-svn: 265259
2016-04-03 08:41:12 +00:00
Elena Demikhovsky 95f3173ce9 AVX-512: Generate KTEST instead of TEST fir i1 vectors
KTEST instruction may be used instead of TEST in this case:

%int_sel3 = bitcast <8 x i1> %sel3 to i8
%res = icmp eq i8 %int_sel3, zeroinitializer
br i1 %res, label %L2, label %L1

Differential Revision: http://reviews.llvm.org/D18444

llvm-svn: 264298
2016-03-24 15:53:45 +00:00
Igor Breger 3ea8af5108 AVX512BW: Enable v32i1/v64i1 BUILD_VECTOR
Differential Revision: http://reviews.llvm.org/D18211

llvm-svn: 263898
2016-03-20 13:09:43 +00:00
Elena Demikhovsky e5bbca6ae2 Optimized loading (zextload) of i1 value from memory.
This patch is a partial revert of https://llvm.org/svn/llvm-project/llvm/trunk@237793.
Extra "and" causes performance degradation.

We assume that i1 is stored in zero-extended form. And store operation is responsible for zeroing upper bits.

Differential Revision: http://reviews.llvm.org/D17541

llvm-svn: 261828
2016-02-25 07:05:12 +00:00
Zia Ansari 30a02384f7 Implemented stack symbol table ordering/packing optimization to improve data locality and code size from SP/FP offset encoding.
Differential Revision: http://reviews.llvm.org/D15393

llvm-svn: 260917
2016-02-15 23:44:13 +00:00
Igor Breger fca0a34398 AVX512: Fix truncate v32i8 to v32i1 lowering implementation.
Enable truncate 128/256bit packed byte/word with AVX512BW but without AVX512VL, use 512bit instructions.

Differential Revision: http://reviews.llvm.org/D16531

llvm-svn: 259044
2016-01-28 13:19:25 +00:00
Igor Breger d6c187b038 AVX512: Add store mask patterns.
Differential Revision: http://reviews.llvm.org/D16596

llvm-svn: 258914
2016-01-27 08:43:25 +00:00
Igor Breger 7a000f5bb2 AVX512: Masked move intrinsic implementation.
Implemented intrinsic for the follow instructions (reg move) : VMOVDQU8/16, VMOVDQA32/64, VMOVAPS/PD.

Differential Revision: http://reviews.llvm.org/D16316

llvm-svn: 258398
2016-01-21 14:18:11 +00:00
Igor Breger dd6522c653 AVX512 : Change v8i1 bitconvert GR8 pattern, remove unnecessary movzbl instruction.
code example , previous implementation.
    movzbl  %dil, %eax
    kmovw  %eax, %k0
  new code
    kmovw  %edi, %k0

Differential Revision: http://reviews.llvm.org/D16287

llvm-svn: 258045
2016-01-18 12:02:45 +00:00
Igor Breger 756c289dd8 AVX512: Change VPMOVB2M DAG lowering , use CVT2MASK node instead TRUNCATE.
Fix TRUNCATE lowering vector to vector i1, use LSB and not MSB.
Implement VPMOVB/W/D/Q2M intrinsic.

Differential Revision: http://reviews.llvm.org/D15675

llvm-svn: 256470
2015-12-27 13:56:16 +00:00
Elena Demikhovsky 9e225a2f52 AVX-512: Kreg set 0/1 optimization
The patterns that set a mask register to 0/1
KXOR %kn, %kn, %kn / KXNOR %kn, %kn, %kn
are replaced with
KXOR %k0, %k0, %kn / KXNOR %k0, %k0, %kn - AVX-512 targets optimization.

KNL does not recognize dependency-breaking idioms for mask registers,
so kxnor %k1, %k1, %k2 has a RAW dependence on %k1.
Using %k0 as the undef input register is a performance heuristic based
on the assumption that %k0 is used less frequently than the other mask
registers, since it is not usable as a write mask.

Differential Revision: http://reviews.llvm.org/D15739

llvm-svn: 256365
2015-12-24 08:12:22 +00:00
Elena Demikhovsky 702a6adfaa AVX-512: shufflevector for i1 vectors <2 x i1> .. <64 x i1>
AVX-512 does not provide an instruction that shuffles mask register. So I do the following way:

mask-2-simd , shuffle simd , simd-2-mask

Differential Revision: http://reviews.llvm.org/D12727

llvm-svn: 247876
2015-09-17 06:53:12 +00:00
Elena Demikhovsky 9f83c7346f AVX-512: store <4 x i1> and <2 x i1> values in memory
Enabled DAG pattern lowering for SKX with DQI predicate.

Differential Revision: http://reviews.llvm.org/D12550

llvm-svn: 246625
2015-09-02 09:20:58 +00:00
Elena Demikhovsky 1c1391ba24 Added promotion to EXTRACT_SUBVECTOR operand.
I encountered with this case in one of KNL tests for i1 vectors.
v16i1 = EXTRACT_SUBVECTOR v32i1, x

llvm-svn: 238130
2015-05-25 11:33:13 +00:00
Elena Demikhovsky f61727d880 AVX-512: fixed algorithm of building vectors of i1 elements
fixed extract-insert i1 element,
load i1, zextload i1 should be with "and $1, %reg" to prevent loading garbage.
added a bunch of new tests.

llvm-svn: 237793
2015-05-20 14:32:03 +00:00
Elena Demikhovsky c1ac5d7bd5 AVX-512: select operation for i1 vectors
like: select i1 %cond, <16 x i1> %a, <16 x i1> %b.
I added pseudo-CMOV patterns to resolve the "select".
Added tests for KNL and SKX.

llvm-svn: 237106
2015-05-12 09:36:52 +00:00
Elena Demikhovsky 75d1489326 AVX-512: fixed a bug in i1 vectors lowering
llvm-svn: 236947
2015-05-10 10:33:32 +00:00
Elena Demikhovsky d1084c5b3f AVX-512: Extend/Truncate operations for SKX,
SETCC for bit-vectors

llvm-svn: 235875
2015-04-27 12:57:59 +00:00
David Blaikie a79ac14fa6 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794
2015-02-27 21:17:42 +00:00
Elena Demikhovsky 1a603b3f13 AVX-512: Changes in operations on masks registers for KNL and SKX
- Added KSHIFTB/D/Q for skx
- Added KORTESTB/D/Q for skx
- Fixed store operation for v8i1 type for KNL
- Store size of v8i1, v4i1 and v2i1 are changed to 8 bits

llvm-svn: 227043
2015-01-25 12:47:15 +00:00
Robert Khasanov 595683da00 [SKX] Enabling mask logic instructions: encoding, lowering
Instructions: KAND{BWDQ}, KANDN{BWDQ}, KOR{BWDQ}, KXOR{BWDQ}, KXNOR{BWDQ}

Reviewed by Elena Demikhovsky <elena.demikhovsky@intel.com>

llvm-svn: 214081
2014-07-28 13:46:45 +00:00
NAKAMURA Takumi c0eb860c21 Let llvm/test/CodeGen/X86/avx512*-mask-op.ll(s) aware of Win32 x64 calling convention.
llvm-svn: 213812
2014-07-23 22:38:25 +00:00
Robert Khasanov 74acbb7767 [SKX] Enabling mask instructions: encoding, lowering
KMOVB, KMOVW, KMOVD, KMOVQ, KNOTB, KNOTW, KNOTD, KNOTQ

Reviewed by Elena Demikhovsky <elena.demikhovsky@intel.com>

llvm-svn: 213757
2014-07-23 14:49:42 +00:00
Elena Demikhovsky 750498c77b AVX-512: implemented zext fron i1 to i16
llvm-svn: 201502
2014-02-17 07:29:33 +00:00
Elena Demikhovsky e382c3fdcd AVX-512: changed intrinsics for mask operations
llvm-svn: 196918
2013-12-10 13:53:10 +00:00
Andrew Trick e97d8d6dde Enable MI Sched for x86.
This changes the SelectionDAG scheduling preference to source
order. Soon, the SelectionDAG scheduler can be bypassed saving
a nice chunk of compile time.

Performance differences that result from this change are often a
consequence of register coalescing. The register coalescer is far from
perfect. Bugs can be filed for deficiencies.

On x86 SandyBridge/Haswell, the source order schedule is often
preserved, particularly for small blocks.

Register pressure is generally improved over the SD scheduler's ILP
mode. However, we are still able to handle large blocks that require
latency hiding, unlike the SD scheduler's BURR mode. MI scheduler also
attempts to discover the critical path in single-block loops and
adjust heuristics accordingly.

The MI scheduler relies on the new machine model. This is currently
unimplemented for AVX, so we may not be generating the best code yet.

Unit tests are updated so they don't depend on SD scheduling heuristics.

llvm-svn: 192750
2013-10-15 23:33:07 +00:00
Elena Demikhovsky 40864b690b AVX-512 set: added mask operations, lowering BUILD_VECTOR for i1 vector types.
Added intrinsics and tests.

llvm-svn: 187717
2013-08-05 08:52:21 +00:00