A new pass to manage the Mode register.
Currently this just manages the floating point double precision
rounding requirements, but is intended to be easily extended to
encompass all Mode register settings.
The immediate motivation comes from the requirement to use the
round-to-zero rounding mode for the 16 bit interpolation
instructions, where the rounding mode setting is shared between
16 and 64 bit operations.
llvm-svn: 348754
The identity ~(x ^ y) == (~x ^ y) == (x ^ ~y) allows XNOR (XOR/NOT) to turn into NOT/XOR. Handling this case with its own split means we can make the NOT remain in the scalar unit. Previously, we split 64-bit XNOR into two 32-bit XNOR, then lowered. Now, we get three instructions (s_not, v_xor, v_xor) rather than four in the case where either of the sources is a scalar 64-bit.
Add test cases to xnor.ll to attempt XNOR Vx, Sy and XNOR Sx, Vy. Also adding test that uses the opposite identity such that (~x ^ y) on the scalar unit (or vector for gfx906) can generate XNOR. This already worked, but I didn't see a test for it.
Differential: https://reviews.llvm.org/D55071
llvm-svn: 348075
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 348050
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
This patch adds support for S_ANDN2, S_ORN2 32-bit and 64-bit instructions and adds splits to move them to the vector unit (for which there is no equivalent instruction). It modifies the way that the more complex scalar instructions are lowered to vector instructions by first breaking them down to sequences of simpler scalar instructions which are then lowered through the existing code paths. The pattern for S_XNOR has also been updated to apply inversion to one input rather than the output of the XOR as the result is equivalent and may allow leaving the NOT instruction on the scalar unit.
A new tests for NAND, NOR, ANDN2 and ORN2 have been added, and existing tests now hit the new instructions (and have been modified accordingly).
Differential: https://reviews.llvm.org/D54714
llvm-svn: 347877
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 344696
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Recommits r341413 with changes to update the MachineDominatorTree when present.
Differential Revision: https://reviews.llvm.org/D51742
llvm-svn: 343992
Currently it returns incorrect operand size for a target independet
node such as COPY if operand is a register with subreg. Instead of
correct subreg size it returns a size of the whole superreg.
Differential Revision: https://reviews.llvm.org/D52736
llvm-svn: 343508
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Differential Revision: https://reviews.llvm.org/D50982
llvm-svn: 341413
This needs to be done in the SSA fold operands
pass to be effective, so there is a bit of overlap
with SIShrinkInstructions but I don't think this
is practically avoidable.
llvm-svn: 340859
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
getTargetCustom() requires values for "Kind" in the constructor
that are not in the PSVKind enum. Passing a value that is not inside
an enum as an argument to a constructor of the type of the enum is
UB. Changing to the underlying type of the enum would solve the UB
Differential Revision: https://reviews.llvm.org/D50909
llvm-svn: 340200
Summary:
These instructions interact with hardware blocks outside the shader core,
and they can have "scalar" side effects even when EXEC = 0. We don't
want these scalar side effects to occur when all lanes want to skip
these instructions, so always add the execz skip branch instruction
for basic blocks that contain them.
Also ensure that we skip scalar stores / atomics, though we don't
code-gen those yet.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48431
Change-Id: Ieaeb58352e2789ffd64745603c14970c60819d44
llvm-svn: 338235
Summary:
This is a follow-up to r335942.
- Merge SISubtarget into AMDGPUSubtarget and rename to GCNSubtarget
- Rename AMDGPUCommonSubtarget to AMDGPUSubtarget
- Merge R600Subtarget::Generation and GCNSubtarget::Generation into
AMDGPUSubtarget::Generation.
Reviewers: arsenm, jvesely
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49037
llvm-svn: 336851
Summary:
We now have two sets of generated TableGen files, one for R600 and one
for GCN, so each sub-target now has its own tables of instructions,
registers, ISel patterns, etc. This should help reduce compile time
since each sub-target now only has to consider information that
is specific to itself. This will also help prevent the R600
sub-target from slowing down new features for GCN, like disassembler
support, GlobalISel, etc.
Reviewers: arsenm, nhaehnle, jvesely
Reviewed By: arsenm
Subscribers: MatzeB, kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46365
llvm-svn: 335942
Summary:
This allows us to reduce the number of different machine instruction
opcodes, which reduces the table sizes and helps flatten the TableGen
multiclass hierarchies.
We can do this because for each hardware MIMG opcode, we have a full set
of IMAGE_xxx_Vn_Vm machine instructions for all required sizes of vdata
and vaddr registers. Instead of having separate D16 machine instructions,
a packed D16 instructions loading e.g. 4 components can simply use the
same V2 opcode variant that non-D16 instructions use.
We still require a TSFlag for D16 buffer instructions, because the
D16-ness of buffer instructions is part of the opcode. Renaming the flag
should help avoid future confusion.
The one non-obvious code change is that for gather4 instructions, the
disassembler can no longer automatically decide whether to use a V2 or
a V4 variant. The existing logic which choose the correct variant for
other MIMG instruction is extended to cover gather4 as well.
As a bonus, some of the assembler error messages are now more helpful
(e.g., complaining about a wrong data size instead of a non-existing
instruction).
While we're at it, delete a whole bunch of dead legacy TableGen code.
Change-Id: I89b02c2841c06f95e662541433e597f5d4553978
Reviewers: arsenm, rampitec, kzhuravl, artem.tamazov, dp, rtaylor
Subscribers: wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47434
llvm-svn: 335222
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
This patch implements d16 support for image load, image store and image sample intrinsics.
Reviewers:
Matt, Brian.
Differential Revision:
https://reviews.llvm.org/D3991
llvm-svn: 322903
Use VOP3 add/addc like usual.
This has some tradeoffs. Inline immediates fold
a little better, but other constants are worse off.
SIShrinkInstructions could be made smarter to handle
these cases.
This allows us to avoid selecting scalar adds where we
need to track the carry in scc and replace its users.
This makes it easier to use the carryless VALU adds.
llvm-svn: 318340
Summary:
Kill the thread if operand 0 == false.
llvm.amdgcn.wqm.vote can be applied to the operand.
Also allow kill in all shader stages.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D38544
llvm-svn: 316427
MachineScheduler when clustering loads or stores checks if base
pointers point to the same memory. This check is done through
comparison of base registers of two memory instructions. This
works fine when instructions have separate offset operand. If
they require a full calculated pointer such instructions can
never be clustered according to such logic.
Changed shouldClusterMemOps to accept base registers as well and
let it decide what to do about it.
Differential Revision: https://reviews.llvm.org/D37698
llvm-svn: 313208
In moveToVALU(), move to vector ALU is performed, all instrs in
the use chain will be visited. We do not want the same node to be
pushed to the visit worklist more than once.
Differential Revision: https://reviews.llvm.org/D34726
llvm-svn: 308039
Summary: Previously there were two separate pseudo instruction for SDWA on VI and on GFX9. Created one pseudo instruction that is union of both of them. Added verifier to check that operands conform either VI or GFX9.
Reviewers: dp, arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, artem.tamazov
Differential Revision: https://reviews.llvm.org/D34026
llvm-svn: 305886
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Tim Corringham