Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
This feature is only relevant to shaders, and is no longer used. When disabled,
lowering of reserved registers for shaders causes a compiler crash.
Remove the feature and add a test for compilation of shaders at OptNone.
Differential Revision: https://reviews.llvm.org/D53829
llvm-svn: 345763
The isAmdCodeObjectV2 is a misleading name which actually checks whether the os
is amdhsa or mesa.
Also add a test to make sure we do not generate old kernel header for code
object v3.
Differential Revision: https://reviews.llvm.org/D52897
llvm-svn: 343813
Summary:
GFX9 and above support sin/cos instructions with a greater range and thus don't
require a fract instruction prior to invocation.
Added a subtarget feature to reflect this and added code to take advantage of
expanded range on GFX9+
Also updated the tests to check correct behaviour
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51933
Change-Id: I1c1f1d3726a5ae32116646ca5cfa1ab4ef69e5b0
llvm-svn: 342222
Move isa version determination into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
llvm-svn: 342069
into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
Differential Revision: https://reviews.llvm.org/D51890
llvm-svn: 341982
This is necessary to add a VI specific builtin,
__builtin_amdgcn_s_dcache_wb. We already have an
overly specific feature for one of these builtins,
for s_memrealtime. I'm not sure whether it's better
to add more of those, or to get rid of that and merge
it with vi-insts.
Alternatively, maybe this logically goes with scalar-stores?
llvm-svn: 339104
This reverts commit r337021.
WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x1415cd65 in void write_signed<long>(llvm::raw_ostream&, long, unsigned long, llvm::IntegerStyle) /code/llvm-project/llvm/lib/Support/NativeFormatting.cpp:95:7
#1 0x1415c900 in llvm::write_integer(llvm::raw_ostream&, long, unsigned long, llvm::IntegerStyle) /code/llvm-project/llvm/lib/Support/NativeFormatting.cpp:121:3
#2 0x1472357f in llvm::raw_ostream::operator<<(long) /code/llvm-project/llvm/lib/Support/raw_ostream.cpp:117:3
#3 0x13bb9d4 in llvm::raw_ostream::operator<<(int) /code/llvm-project/llvm/include/llvm/Support/raw_ostream.h:210:18
#4 0x3c2bc18 in void printField<unsigned int, &(amd_kernel_code_s::amd_kernel_code_version_major)>(llvm::StringRef, amd_kernel_code_s const&, llvm::raw_ostream&) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:78:23
#5 0x3c250ba in llvm::printAmdKernelCodeField(amd_kernel_code_s const&, int, llvm::raw_ostream&) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:104:5
#6 0x3c27ca3 in llvm::dumpAmdKernelCode(amd_kernel_code_s const*, llvm::raw_ostream&, char const*) /code/llvm-project/llvm/lib/Target/AMDGPU/Utils/AMDKernelCodeTUtils.cpp:113:5
#7 0x3a46e6c in llvm::AMDGPUTargetAsmStreamer::EmitAMDKernelCodeT(amd_kernel_code_s const&) /code/llvm-project/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp:161:3
#8 0xd371e4 in llvm::AMDGPUAsmPrinter::EmitFunctionBodyStart() /code/llvm-project/llvm/lib/Target/AMDGPU/AMDGPUAsmPrinter.cpp:204:26
[...]
Uninitialized value was created by an allocation of 'KernelCode' in the stack frame of function '_ZN4llvm16AMDGPUAsmPrinter21EmitFunctionBodyStartEv'
#0 0xd36650 in llvm::AMDGPUAsmPrinter::EmitFunctionBodyStart() /code/llvm-project/llvm/lib/Target/AMDGPU/AMDGPUAsmPrinter.cpp:192
llvm-svn: 337079
This was completely broken if there was ever a struct argument, as
this information is thrown away during the argument analysis.
The offsets as passed in to LowerFormalArguments are not useful,
as they partially depend on the legalized result register type,
and they don't consider the alignment in the first place.
Ignore the Ins array, and instead figure out from the raw IR type
what we need to do. This seems to fix the padding computation
if the DAG lowering is forced (and stops breaking arguments
following padded arguments if the arguments were only partially
lowered in the IR)
llvm-svn: 337021
SITargetLowering queries SIInstrInfo in its constructor, so SIInstrInfo
must be initialized first. This fixes msan buildbot failures and was
introduced by r336851.
llvm-svn: 336861
Summary:
This is a follow-up to r335942.
- Merge SISubtarget into AMDGPUSubtarget and rename to GCNSubtarget
- Rename AMDGPUCommonSubtarget to AMDGPUSubtarget
- Merge R600Subtarget::Generation and GCNSubtarget::Generation into
AMDGPUSubtarget::Generation.
Reviewers: arsenm, jvesely
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49037
llvm-svn: 336851
This was introducing unnecessary padding after the explicit
arguments, depending on the alignment of the total struct type.
Also has the side effect of avoiding creating an extra GEP for
the offset from the base kernel argument to the explicit kernel
argument offset.
llvm-svn: 335999
Summary:
We now have two sets of generated TableGen files, one for R600 and one
for GCN, so each sub-target now has its own tables of instructions,
registers, ISel patterns, etc. This should help reduce compile time
since each sub-target now only has to consider information that
is specific to itself. This will also help prevent the R600
sub-target from slowing down new features for GCN, like disassembler
support, GlobalISel, etc.
Reviewers: arsenm, nhaehnle, jvesely
Reviewed By: arsenm
Subscribers: MatzeB, kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46365
llvm-svn: 335942
On GFX9 and earlier, flat memory ops may decrement VMCNT out-of-order as well as LGKMCNT out-of-order.
Differential Revision: https://reviews.llvm.org/D46616
llvm-svn: 333926
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
- Predicate D16 patterns on this new feature
- Added this new feature to gfx900/2/4
Differential Revision: https://reviews.llvm.org/D46366
llvm-svn: 331551
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
v2: - fix regressions in merge-stores.ll and multiple_tails.ll
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329764
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329591
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
Summary: Starting from GCN 2nd generation, ISA supports ds_read_b128 on top of ds_read_b64.
This patch supports ds_read_b128 instruction pattern and generation of this instruction.
In the vectorizer, this patch also widen the vector length so that vectorizer generates
128 bit loads for local address-space which gets translated to ds_read_b128.
Since the performance benefit is not clear; compiler generates ds_read_b128 under -amdgpu-ds128.
Author: FarhanaAleen
Reviewed By: rampitec, arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D44210
llvm-svn: 327153
Summary:
With OS type AMDPAL, the scratch descriptor is hardwired to be loaded
from offset 0 of the global information table, whose low pointer is
passed in s0. For a merge shader on gfx9+, it needs to be s8 instead, as
the hardware reserves s0-s7.
Reviewers: kzhuravl
Subscribers: arsenm, nhaehnle, dstuttard, llvm-commits, t-tye, yaxunl, wdng, kzhuravl
Differential Revision: https://reviews.llvm.org/D42203
llvm-svn: 326088
Summary:
I checked the AMD closed source compiler and the workaround is only
needed when x3 is emulated as x4, which we don't do in LLVM.
SMEM x3 opcodes don't exist, and instead there is a possibility to use x4
with the last component being unused. If the last component is out of
buffer bounds and falls on the next 4K page, the hw hangs.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D42756
llvm-svn: 324486