Personality is copied as part of copyFunctionAttributes, but it is
invalid on a declaration. Remove the personality attribute it the
function body is not cloned.
Also add a verifier run over output modules in the llvm-split tool.
llvm-svn: 264667
If all a BUILD_VECTOR's source elements are the same bit (AND/XOR/OR) operation type and each has one constant operand, lower to a pair of BUILD_VECTOR and just apply the bit operation to the vectors.
The constant operands will form a constant vector meaning that we still only have a single BUILD_VECTOR to lower and we will have replaced all the scalarized operations with a single SSE equivalent.
Its not in our interest to start make a general purpose vectorizer from this, but I'm seeing enough of these scalar bit operations from the later legalization/scalarization stages to support them at least.
Differential Revision: http://reviews.llvm.org/D18492
llvm-svn: 264666
r260042 removed a footnote referring to autoconf, but it left
around one item still referring to that footnote (libtool), and
it didn't renumber the later footnote reference.
llvm-svn: 264663
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
What's changed since the original commit?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I weakened the CHECK lines in instrprof-comdat.h to account for the
fact that there have been bugfixes to clang coverage. These will be
fixed up in a follow-up.
- I added an assert to make sure we don't get bitten by this again.
- I constructed the c-general.profraw file without name compression
enabled to appease some bots.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264658
A DICompileUnit that is not listed in llvm.dbg.cu will cause assertion
failures and/or crashes in the backend. The Verifier should reject this.
rdar://problem/25369499
llvm-svn: 264657
Explicitly check that artificial byte limit is rounded correctly by
exposing BitstreamReader::Size through a new accessor, getSizeIfKnown.
The original code for rounding (from r264547) wasn't obviously correct,
and even though r264623 cleaned it up (by calling llvm::alignTo) I think
it's worth testing.
llvm-svn: 264650
This is a fix for PR26941.
When there is both a section and a global definition with the same
name, the global wins.
Section symbols are not added to the symbol table; section references
are left undefined and fixed up in the object writer unless they've
been satisfied by some other definition.
llvm-svn: 264649
On OS X El Capitan and iOS 9, the linker supports a new section
attribute, live_support, which allows dead stripping to remove dead
globals along with the ASAN metadata about them.
With this change __asan_global structures are emitted in a new
__DATA,__asan_globals section on Darwin.
Additionally, there is a __DATA,__asan_liveness section with the
live_support attribute. Each entry in this section is simply a tuple
that binds together the liveness of a global variable and its ASAN
metadata structure. Thus the metadata structure will be alive if and
only if the global it references is also alive.
Review: http://reviews.llvm.org/D16737
llvm-svn: 264645
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
This reverts the revert commit beaf3d18. What's changed?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I updated the expected counts in instrprof-comdat.h to account for
the fact that there have been bugfixes to clang coverage.
- I added an assert to make sure we don't get bitten by this again.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264641
Instead of using a bit to detect if they are "dynamic", just look at
sh_link.
This is a simplification on its own, and will help with using
llvm-objdump in dynamic objects.
llvm-svn: 264624
Summary:
Hopefully this will make it easier for the next person to figure all
this out...
Reviewers: bogner, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18490
llvm-svn: 264611
They do have a def machine operand.
Fixing the definition is necessary for an upcoming patch.
Differential Revision: http://reviews.llvm.org/D18384
llvm-svn: 264607
When using Visual Studio 2015, cmake now puts the native visualizers in llvm.sln, so the developer automatically sees custom visualizations.
Much thanks to ariccio who provided extensive help on this change. (manual installation still needed on VS2013)
llvm-svn: 264601
The A2 cores support the popcntw/popcntd instructions, but they're microcoded,
and slower than our default software emulation. Specifically, popcnt[dw] take
approximately 74 cycles, whereas our software emulation takes only 24-28
cycles.
I've added a new target feature to indicate a slow popcnt[dw], instead of just
removing the existing target feature from the a2/a2q processor models, because:
1. This allows us to return more accurate information via the TTI interface
(I recognize that this currently makes no practical difference)
2. Is hopefully easier to understand (it allows the core's features to match
its manual while still having the desired effect).
llvm-svn: 264600
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264596
Don't set the function hotness attribute on the fly. This changes the CFG
branch probability of the caller function, which leads to inconsistent BB
ordering. This patch moves the attribute setting to a separated loop after
the counts in all functions are populated.
Fixes PR27024 - PGO instrumentation profile data is not reflected in correct
basic blocks.
Differential Revision: http://reviews.llvm.org/D18491
llvm-svn: 264594
MachineFunctionProperties represents a set of properties that a MachineFunction
can have at particular points in time. Existing examples of this idea are
MachineRegisterInfo::isSSA() and MachineRegisterInfo::tracksLiveness() which
will eventually be switched to use this mechanism.
This change introduces the AllVRegsAllocated property; i.e. the property that
all virtual registers have been allocated and there are no VReg operands
left.
With this mechanism, passes can declare that they require a particular property
to be set, or that they set or clear properties by implementing e.g.
MachineFunctionPass::getRequiredProperties(). The MachineFunctionPass base class
verifies that the requirements are met, and handles the setting and clearing
based on the delcarations. Passes can also directly query and update the current
properties of the MF if they want to have conditional behavior.
This change annotates the target-independent post-regalloc passes; future
changes will also annotate target-specific ones.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D18421
llvm-svn: 264593
Summary:
This helps prevent load clustering from drastically increasing register
pressure by trying to cluster 4 SMRDx8 loads together. The limit of 16
bytes was chosen, because it seems like that was the original intent
of setting the limit to 4 instructions, but more analysis could show
that a different limit is better.
This fixes yields small decreases in register usage with shader-db, but
also helps avoid a large increase in register usage when lane mask
tracking is enabled in the machine scheduler, because lane mask tracking
enables more opportunities for load clustering.
shader-db stats:
2379 shaders in 477 tests
Totals:
SGPRS: 49744 -> 48600 (-2.30 %)
VGPRS: 34120 -> 34076 (-0.13 %)
Code Size: 1282888 -> 1283184 (0.02 %) bytes
LDS: 28 -> 28 (0.00 %) blocks
Scratch: 495616 -> 492544 (-0.62 %) bytes per wave
Max Waves: 6843 -> 6853 (0.15 %)
Wait states: 0 -> 0 (0.00 %)
Reviewers: nhaehnle, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18451
llvm-svn: 264589
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264587