This reverts commit 455d5a8a06.
It broke UBSan:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/21386/steps/check-llvm%20ubsan/logs/stdio
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/test/tools/llvm-readobj/ELF/malformed-pt-dynamic.test:62:10: error: WARN3: expected string not found in input
# WARN3: error: '[[FILE]]': Invalid data was encountered while parsing the file
^
<stdin>:2:1: note: scanning from here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
<stdin>:2:1: note: with "FILE" equal to "/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/test/tools/llvm-readobj/ELF/Output/malformed-pt-dynamic\\.test\\.tmp3"
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
<stdin>:2:117: note: possible intended match here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
Input file: <stdin>
Check file: /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/test/tools/llvm-readobj/ELF/malformed-pt-dynamic.test
The code that reports "PT_DYNAMIC segment offset + size exceeds the size of the file"
has an issue: it is possible to bypass the validation by overflowing the size + offset result.
Differential revision: https://reviews.llvm.org/D85519
Currently we have to set 'Machine' to something in our
YAML descriptions. Usually we use 'EM_X86_64' for 64-bit targets
and 'EM_386' for 32-bit targets. At the same time, in fact, in most
cases our tests do not need a machine type and we can use
'EM_NONE'.
This is cleaner, because avoids the need of using a particular machine.
In this patch I've made the 'Machine' key optional (the default value,
when it is not specified is `EM_NONE`) and removed it (where possible)
from yaml2obj, obj2yaml and llvm-readobj tests.
There are few tests left where I decided not to remove it, because
I didn't want to touch CHECK lines or doing anything more complex
than a removing a "Machine: *" line and formatting lines around.
Differential revision: https://reviews.llvm.org/D86202
It's good to reuse the DWARF parser in lib/DebugInfo so that we don't
need to maintain a separate parser in client side (obj2yaml). Besides,
A test case is added whose length field is a very huge value which makes
obj2yaml stuck when parsing the section.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86192
AMDGPU ISA isn't backwards compatible and hence -mcpu must always be specified during disassembly.
However, the AMDGPU target CPU is stored in e_flags in the ELF object.
This patch allows targets to implement CPU string detection, and also implements it for AMDGPU by looking at e_flags.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D84519
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
This fixes existent FIXMEs: we should not error out when unable to
find the number of relocations.
Differential revision: https://reviews.llvm.org/D85891
Splitted out from D85519.
Currently we report "PT_DYNAMIC segment offset + size exceeds the size of the file",
this changes it to
"PT_DYNAMIC segment offset (0x1234) + file size (0x5678) exceeds the size of the file (0x68ab)"
Differential revision: https://reviews.llvm.org/D85654
Add support for passing in libraries via `-l` and `-L` options to
`llvm-libtool-darwin`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85540
Add support for producing universal binaries containing archives when
`llvm-libtool-darwin` is given inputs of multiple architectures.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85334
This reapplies commit e137b55058 with
fixes for the broken test case: Non-global symbols should only be
skipped after checking that they're not referenced by the harness.
This change moves elfabi related code to llvm/InterfaceStub library
so it can be shared by multiple llvm tools without causing cyclic
dependencies.
Differential Revision: https://reviews.llvm.org/D85678
Add support for -arch_only option for llvm-libtool-darwin. This diff
also adds support for accepting universal files as input and flattening
them to create the required static library. Supports input universal
files contaning both Mach-O object files or archives.
Differences from cctools' libtool:
- `-arch_only` can be specified multiple times
- archives containing universal files are considered invalid (libtool
allows such archives)
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84770
If the referenced symbol of a J[U]MP_SLOT is invalid (e.g. symbol index 0), llvm-objdump -d will bail out:
```
error: 'a': st_name (0x326600) is past the end of the string table of size 0x7
```
where 0x326600 is the st_name field of the first entry past the end of .symtab
Change it to a warning to continue dumping.
`X86/plt.test` uses a prebuilt executable, so I pick `ELF/AArch64/plt.test`
which has a YAML input and can be easily modified.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85623
`getElfSegmentType` and `getElfPtType` are methods that are used for printing
segment types for LLVM and GNU styles accordingly.
This patch does a cleanup and simplification that allows to avoid
the code duplication and to get rid of one macro.
Differential revision: https://reviews.llvm.org/D85830
Specifying --headers is equivalent to setting --file-headers,
--program-headers and --section-headers at the same time.
The existent test case uses a precompiled object and doesn't test the
output properly. This patch fixes it.
Differential revision: https://reviews.llvm.org/D85832
This change replaces the InitialLength of pub-tables with Format and
Length. All the InitialLength fields have been removed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85880
This removes the last `unwrapOrError` call from the `printRelocationsHelper`.
There is a little additional complexity because of `SHT_RELR/SHT_ANDROID_RELR` sections.
Such sections contains only relative relocations and they do not have a
symbol table associated with them, hence we should not try to treat
their `sh_link` field as a reference to a symbol table.
Differential revision: https://reviews.llvm.org/D85430
where stdio.h ::remove() may set errno to EEXIST instead of ENOTEMPTY.
POSIX.1-2017 allows EEXIST for unlink() (which is called by remove()):
> [EEXIST] or [ENOTEMPTY]
> The flag parameter has the AT_REMOVEDIR bit set and the path argument names a directory that is not an empty directory, or there are hard links to the directory other than dot or a single entry in dot-dot.
Reviewed By: ro
Differential Revision: https://reviews.llvm.org/D85690
It removes all `unwrapOrError` calls except the first one, which
is is bit different and can be removed separately.
Differential revision: https://reviews.llvm.org/D85303
This patch refactors the DWARF section dumpers. When dumping a DWARF
section, if the DWARF parser fails to parse the section, we will dump it
as a raw content section. This patch also fixes a bug in
DWARFYAML::Data::isEmpty(). Finally, a test case that tests dumping the
__debug_aranges section is added.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85506
The switch from llvm::cl to OptTable (D83530) dropped --version, which
is needed by some users.
This patch also adds a -v alias, which is available in GNU addr2line.
The version dumping is similar to llvm-objcopy --version (exotic):
```
llvm-symbolizer
LLVM (http://llvm.org/):
LLVM version 12.0.0git
Optimized build with assertions.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake-avx512
```
Reviewed By: dyung, jhenderson
Differential Revision: https://reviews.llvm.org/D85624
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
This is a relanding of cb3a598c87, adding the missing obj2yaml part
that was needed.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie, Higuoxing
Differential Revision: https://reviews.llvm.org/D85313
It adds the proper warnings reporting and updates the mips-reginfo.test to
remove using of the precompiled binary.
Differential revision: https://reviews.llvm.org/D85511
Implemented the `llvm-profdata overlap` feature for sample profiles. It reports weighted //similarity// and unweighted //overlap// metrics at program and function level for two input profiles. Similarity metrics are symmetric with regards to the order of two input profiles. By default, the tool only reports program-level summary. Users can look into function-level details via additional options `--function`, `--similarity-cutoff`, and `--value-cutoff`.
The similarity metrics are designed as follows:
* Program-level summary
* Whole program profile similarity is an aggregate over function-level similarity `FS`: `PS = sum(FS(A) * avg_weight(A))` for all function `A`.
* Whole program sample overlap: `PSO = common_samples / total_samples`.
* Function overlap: `FO = #common_function / #total_function`.
* Hot-function overlap: `HFO = #common_hot_function / #total_hot_function`.
* Hot-block overlap: `HBO = #common_hot_block / #total_hot_block`.
* Function-level details
* Function-level similarity is an aggregate over line/block-level similarities `BS` of all sample lines/blocks in the function, weighted by the closeness of the function's weights in two profiles: `FS = sum(BS(i)) * (1 - weight_distance(A))`.
* Function-level sample overlap: `FSO = common_samples / total_samples` for samples in the function.
Reviewed By: wenlei, hoyFB, wmi
Differential Revision: https://reviews.llvm.org/D83852
It is not enough to replace all uses of users of the function with undef,
the users, we only drop instruction users, so they may stick around.
Let's try different approach - first drop bodies for all the functions
we will drop, which should take care of blockaddress issue the previous
rewrite was dealing with; then, after dropping *all* such bodies,
replace remaining uses with undef (thus all the uses are either
outside of functions, or are in kept functions)
and then finally drop functions.
This seems to work, and passes the *existing* test coverage,
but it is possible that a new issue will be discovered later :)
A new (previously crashing) test added.
Add support for `-D` and `-U` options for llvm-libtool-darwin. `-D`
allows for using zero for timestamps and UIDs/GIDs. `-U` allows for
using actual timestamps and UIDs/GIDs.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84209
Add support for `-filelist` option for llvm-libtool-darwin. `-filelist`
option allows for passing in a file containing a list of filenames.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84206
Add support for constant MachO::CPU_SUBTYPE_ARM64_V8. This constant is
needed so as to match `llvm-libtool-darwin`'s behavior to that of
cctools' libtool when `-arch_only` flag is passed in on command line.
Reviewed by jhenderson, alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D85041
Add symlinks for `llvm-libtool-darwin` and
`llvm-install-name-tool`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85054
dumpDebugStrings() and dumpDebugAbbrev() are no longer used in
macho2yaml. This patch helps remove them.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85496
Unit.Format, Unit.Version and Unit.AddrSize are replaced with
dwarf::FormParams in D84496 to get rid of unnecessary functions
getOffsetSize() and getRefSize(). However, that change makes it
difficult to make AddrSize optional (Optional<uint8_t>). This change
pulls out dwarf::FormParams from DWARFYAML::Unit and use it as a helper
struct in DWARFYAML::emitDebugInfo().
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D85296
The `decode_relrs` helper is declared as:
`Expected<std::vector<Elf_Rel>> decode_relrs(Elf_Relr_Range relrs) const;`
it never returns an error though and hence can be simplified to return
a vector.
Differential revision: https://reviews.llvm.org/D85302
This patch adds support for dumping DWARF sections to obj2yaml. The
.debug_aranges section is used to illustrate the basic idea.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85094
Currently, we only test the `--stackmap` option here:
https://github.com/llvm/llvm-project/blob/master/llvm/test/Object/stackmap-dump.test
it uses a precompiled MachO binary currently and I've found no tests for this option for ELF.
The implementation also has issues. For example, it might assert on a wrong version
of the .llvm-stackmaps section. Or it might crash on an empty or truncated section.
This patch introduces a new tools/llvm-readobj/ELF test file as well as implements a few
basic checks to catch simple crashes/issues
It also eliminates `unwrapOrError` calls in `printStackMap()`.
Differential revision: https://reviews.llvm.org/D85208
This can practically easily be a product of combining strings with
macros in resource files.
This fixes https://github.com/mstorsjo/llvm-mingw/issues/140.
As string literals within llvm-rc are handled as StringRefs, each
referencing an uninterpreted slice of the input file, with actual
interpretation of the input string (codepage handling, unescaping etc)
done only right before writing them out to disk, it's hard to
concatenate them other than just bundling them up in a vector,
without rearchitecting a large part of llvm-rc.
This matches how the same already is supported in VersionInfoValue,
with a std::vector<IntOrString> Values.
MS rc.exe only supports concatenated string literals in version info
values (already supported), string tables (implemented in this patch)
and user data resources (easily implemented in a separate patch, but
hasn't been requested by any end user yet), while GNU windres supports
string immediates split into multiple strings anywhere (e.g. like
(100 ICON "myicon" ".ico"). Not sure if concatenation in other
statements actually is used in the wild though, in resource files
normally built by GNU windres.
Differential Revision: https://reviews.llvm.org/D85183
D83530 removed --inlining={true,false} which were used by old asan_symbolize.py script.
Add compatibility aliases so that old asan_symbolize.py and sanitizer
binaries can work with new llvm-symbolizer.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D85228
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
http://lab.llvm.org:8011/builders/clang-cmake-x86_64-avx2-linux/builds/15718/steps/build%20stage%201/logs/stdio:
FAILED: /usr/bin/c++ -DGTEST_HAS_RTTI=0 -D_DEBUG -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -Itools/llvm-readobj -I/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj -Iinclude -I/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/include -march=broadwell -fPIC -fvisibility-inlines-hidden -Werror=date-time -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wcast-qual -Wno-missing-field-initializers -pedantic -Wno-long-long -Wno-maybe-uninitialized -Wdelete-non-virtual-dtor -Wno-comment -fdiagnostics-color -ffunction-sections -fdata-sections -O3 -fno-exceptions -fno-rtti -UNDEBUG -std=c++14 -MD -MT tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o -MF tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o.d -o tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o -c /home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In function ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&)’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3374:12: error: parse error in template argument list
if (O->size < ExpectedSize)
Note: I played with godbolt.org and was able to catch the similar "error in template argument list" error when used gcc 4.9.0 with this code.
Fix: try to introduce a variable to store `O->size`, it helped to me in godbolt.
http://lab.llvm.org:8011/builders/clang-cmake-x86_64-avx2-linux/builds/15710/steps/build%20stage%201/logs/stdio
fails with:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In function ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&)’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:19: error: the value of ‘ExpectedSize’ is not usable in a constant expression
if (O->size < ExpectedSize)
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3369:10: note: ‘size_t ExpectedSize’ is not const
size_t ExpectedSize =
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:12: error: parse error in template argument list
if (O->size < ExpectedSize)
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In instantiation of ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&) [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>; uint8_t = unsigned char]’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3400:30: required from ‘void {anonymous}::ELFDumper<ELFT>::printMipsOptions() [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>]’
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:2878:21: required from ‘void {anonymous}::ELFDumper<ELFT>::printArchSpecificInfo() [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>]’
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:6999:1: required from here
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:5: error: ‘size’ is not a member template function
Fix: add 2 `const` words to variables.
`printMipsOptions()` and the test related has the following issues currently:
1) It does not check the value of Elf_Mips_Options<ELFT>::size field.
2) For ODK_REGINFO options it is possible to read past the end of buffer,
because there is no check against the `sizeof(Elf_Mips_RegInfo<ELFT>)`.
3) The error about the broken size is just printed to the standard output.
4) The binary input is used for the test.
5) There is no testing for multiple options in the .MIPS.options section,
though the code supports it.
6) Only llvm-readobj is tested, but not llvm-readelf.
7) "Unsupported MIPS options tag" message does not reveal the tag ID/name.
This patch fixes all of these points.
Differential revision: https://reviews.llvm.org/D84854
It turns out that findSectionByName can return
const Elf_Shdr * instead of Expected<>, because its
code never returns an error currently (it reports warnings instead).
Differential revision: https://reviews.llvm.org/D85135
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Archives can now be specified as input files the same way that object
files are. Archives will always be linked after all objects (regardless
of the relative order of the inputs) but before any dynamic libraries or
process symbols.
This patch also relaxes matching for slice triples in
StaticLibraryDefinitionGenerator in order to support this feature:
Vendors need not match if the source vendor is unknown.
We have a `findSectionByName` helper that tries to find a section
by it name. It is used in a few places, but never tested.
I'd like to reuse this helper for a different place.
For this, I've changed it to return Expected<> and now it
doesn't use `unwrapOrErr` anymore. It also now a member of
Dumper class and might report warnings.
Differential revision: https://reviews.llvm.org/D84651
The -phony-externals option adds a generator which explicitly defines any
otherwise unresolved externals as null. This transforms link-time
unresolved-symbol errors into potential runtime null pointer accesses
(if an unresolved external is actually accessed during execution).
This option can be useful in -harness mode to avoid having to mock a
large number of symbols that are not reachable at runtime (e.g. unused
methods referenced by a class vtable).
This prevents weak symbols from being immediately dead-stripped when not
directly referenced from the test harneess, enabling use of weak symbols
from the code under test.
Refactoring `Slice` class and function `createUniversalBinary` from
`llvm-lipo` into MachOUniversalWriter. This refactoring is necessary so
as to use the refactored code for creating universal binaries under
llvm-libtool-darwin.
Reviewed by alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D84662
This patch makes the 'debug_aranges' entry optional. If the entry is
empty, yaml2obj will only emit the header for it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84921
The -harness option enables new testing use-cases for llvm-jitlink. It takes a
list of objects to treat as a test harness for any regular objects passed to
llvm-jitlink.
If any files are passed using the -harness option then the following
transformations are applied to all other files:
(1) Symbols definitions that are referenced by the harness files are promoted
to default scope. (This enables access to statics from test harness).
(2) Symbols definitions that clash with definitions in the harness files are
deleted. (This enables interposition by test harness).
(3) All other definitions in regular files are demoted to local scope.
(This causes untested code to be dead stripped, reducing memory cost and
eliminating spurious unresolved symbol errors from untested code).
These transformations allow the harness files to reference and interpose
symbols in the regular object files, which can be used to support execution
tests (including fuzz tests) of functions in relocatable objects produced by a
build.
This reduces the number of check-llvm failures by 500.
Ideally we'd have a codegen version of PassRegistry.def, or have all the
codegen passes ported and put into PassRegistry.def. But since that
doesn't exist yet, hardcode the list of codegen IR passes.
There are still codegen passes missing from this list, I'll add them
later as I stumble upon them.
Reviewed By: asbirlea, ychen
Differential Revision: https://reviews.llvm.org/D84872
This introduces the printRelocationsHelper() which now contains the common
code used by both GNU and LLVM output styles.
Differential revision: https://reviews.llvm.org/D83935
This patch refactors the llvm tools namely, llvm-stress and sancov,
as well as the llvm TableGen utility, to use the new InitLLVM
interface which encapsulates PrettyStackTrace.
This is from https://reviews.llvm.org/D70702, but only for LLVM.
Reviewed-by: Kai
Differential Revision: https://reviews.llvm.org/D83484
Currently, when dumping section headers, llvm-readelf
prints "RELR" for SHT_ANDROID_RELR/SHT_RELR sections.
The behavior was introduced in D47919 and revealed in D84330.
But "SHT_ANDROID_RELR" has a different value from "SHT_RELR".
Also, "SHT_ANDROID_REL/SHT_ANDROID_RELA" are printed as "ANDROID_REL/ANDROID_RELA",
what makes the handling of the "SHT_ANDROID_RELR" inconsistent.
This patch makes llvm-readelf to print "ANDROID_RELR" instead of "RELR".
Differential revision: https://reviews.llvm.org/D84393
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
This patch helps teach llvm-readelf to emit a correct number spaces when
dumping in hex format.
Before this patch, when the hex data doesn't fill the 4th column, some
spaces are missing.
```
Hex dump of section '.sec':
0x00000000 00000000 00000000 00000000 00000000 ................
0x00000010 00000000 00000000 00000000 0000 ..............
```
After this patch:
```
Hex dump of section '.sec':
0x00000000 00000000 00000000 00000000 00000000 ................
0x00000010 00000000 00000000 00000000 0000 ..............
```
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84640
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Much like with function reduction, there may be remaining unhandled uses
of function, in particular in blockaddress. And in constants we can't
RAUW it with undef, because undef is not a function.
Instead, let's try to pretent that in the remaining cases, the new
signature didn't change, by bitcasting it.
A new (previously crashing) test case added.
There may be other users of a function other than CallInsts,
but what's more important, we can't actually replace function pointer
with undef, because for constants, that would not preserve the type
and RAUW would assert.
In particular, that affects blockaddress, however it proves to be
prohibitively complex to come up with a good test involving blockaddress:
we'd need to both ensure that the function body survives until
this pass, and is not interesting in this pass.
Summary:
Recursion detection can be non-trivial. Currently, the state-of-the-art for LLVM,
as far as i'm concerned, is D72362 `[clang-tidy] misc-no-recursion: a new check`.
However, it is quite limited:
* It does very basic call-graph based analysis, in the sense it will report even dynamically-unreachable recursion.
* It is inherently limited to a single TU
* It is hard to gauge how problematic each recursion is in practice.
Some of that can be addressed by adding clang analyzer-based check,
then it would at least support multiple TU's.
However, we can approach this problem from another angle - dynamic run-time analysis.
We already have means to capture a run-time callgraph (XRay, duh),
and there are already means to reconstruct it within `llvm-xray` tool.
This proposes to add a `-recursive-calls-only` switch to the `account` tool.
When the switch is on, when re-constructing callgraph for latency reconstruction,
each time we enter/leave some function, we increment/decrement an entry for the function
in a "recursion depth" map. If, when we leave the function, said entry was at `1`,
then that means the function didn't call itself, however if it is at `2` or more,
then that means the function (possibly indirectly) called itself.
If the depth is 1, we don't account the time spent there,
unless within this call stack the function already recursed into itself.
Note that we don't pay for recursion depth tracking when `recursive-calls-only` is not on,
and the perf impact is insignificant (+0.3% regression)
The overhead of the option is actually negative, around -5.26% user time on a medium-sized (3.5G) XRay log.
As a practical example, that 3.5G log is a capture of the entire middle-end opt pipeline
at `-O3` for RawSpeed unity build. There are total of `5500` functions in the log,
however `-recursive-calls-only` says that `269`, or 5%, are recursive.
Having this functionality could be helpful for recursion eradication.
Reviewers: dberris, mboerger
Reviewed By: dberris
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84582
It doesn't really need to know where Timings are stored, it just needs
to be able to sort them, so MutableArrayRef is enough.
That uncovers an interesting quirk that it relied on
implicit double->int conversion for calculating percentiles.
We can happily turn function definitions into declarations,
thus obscuring their argument from being elided by this pass.
I don't believe there is a good reason to just ignore declarations.
likely even proper llvm intrinsics ones,
at worst the input becomes uninteresting.
The other question here is that all these transforms are all-or-nothing.
In some cases, should we be treating each use separately?
The main blocker here seemed to be that llvm::CloneFunctionInto()
does `&OldFunc->front()`, which inserts a nullptr into a densemap,
which is not happy about it and asserts.
replaceFunctionCalls() is very non-exhaustive, it only handles
CallInst's. Which means, by the time we drop old function,
there may still be uses of it lurking around.
Let's instead whack-a-mole them by all by replacing with undef.
I'm not sure this is the best handling, especially for calls, but IMO
poorly reduced input is much better than crashing reduction tool.
A (previously-crashing!) test added.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46819
Terminator may have returned value, so we need to replace uses,
and in general handle invoke as a branch inst.
I'm not sure this is the best handling, but IMO poorly reduced
input is much better than crashing reduction tool.
A (previously-crashing!) test added.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46818
ReduceFunctions could do it, but it also replaces *all* calls with undef,
so if any of undef replacements makes reduction uninteresting,
it won't work.
ReduceBasicBlocks also could do it, but well, it may take many guesses
for all the blocks of a function to happen to be out-of-chunk,
which is not a very efficient way to go about it.
So let's just do this first.
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
It is used for printing section headers in the GNU style
and the implementation can be simplified.
Differential revision: https://reviews.llvm.org/D84330
Summary:
If there was a single target to begin with, because a single target
can only occupy a single chunk, we couldn't increase granularity.
and would immediately give up.
Likewise, if we had multiple targets, if by the end we'd end up with
a single target, we wouldn't finish reducing it, it would always
end up being "interesting"
Reviewers: dblaikie, nickdesaulniers, diegotf
Reviewed By: dblaikie
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84318
This patch includes the supporting code that enables always
instrumenting the function entry block by default.
This patch will NOT the default behavior.
It adds a variant bit in the profile version, adds new directives in
text profile format, and changes llvm-profdata tool accordingly.
This patch is a split of D83024 (https://reviews.llvm.org/D83024)
Many test changes from D83024 are also included.
Differential Revision: https://reviews.llvm.org/D84261
It was requested in D84173 thread to not do it, because otherwise we extract and
check the name of the symbol table in LLVM style, but do not use it and
might report a warning which perhaps might be confusing.
Differential revision: https://reviews.llvm.org/D84231
These functions can be used to generate strings like
"SHT_?? section with index ?" to describe sections in error/warning messages,
what helps to simplify and generalize them.
Also this allows to isolate the following common code pattern:
`&Sec - &cantFail(Obj->sections()).front();`
Differential revision: https://reviews.llvm.org/D84240
The current behavior was introduced by me in D37567 and it is a bit strange. It prints the
"Error: ...." message to the errs() manually and stops dumping the group section which has this error.
This behavior is consistent with GNU though, but it is very inconsistent with what the regular llvm-readelf
code usually does/prints, so I suggest to change the implementation:
1) Instead of printing "Error: ...." to errs() - just report a warning.
2) Try to continue dumping the section.
3) Merge broken-group.test to group.text.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D84170
We have an issue currently: we are trying to read the name of the SHT_DYNSYM section
very early and using `unwrapOrError` call for that.
The name is needed only for the GNU output. Because of the current logic, the tool
fails to dump the whole object when something is wrong with the name of the .dynsym section.
This patch delays reading the name and also allows it to be broken.
Differential revision: https://reviews.llvm.org/D84173
Add support for flattening archives while creating static libraries.
Hence, can now pass archives as input in addition to Mach-O binaries.
Furthermore, archives themselves must only conatain Mach-O binaries. As
per cctools' libtool's behavior, llvm-libtool-darwin does not flatten
archives recursively.
Reviewed by alexshap, smeenai, jhenderson
Differential Revision: https://reviews.llvm.org/D83520
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
OptNoneInstrumentation is part of StandardInstrumentations. It skips
functions (or loops) that are marked optnone.
The feature of skipping optional passes for optnone functions under NPM
is gated on a -enable-npm-optnone flag. Currently it is by default
false. That is because we still need to mark all required passes to be
required. Otherwise optnone functions will start having incorrect
semantics. After that is done in following changes, we can remove the
flag and always enable this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D83519
In an object file, a "PC Begin" field in a FDE is usually relocated by a
PC-relative relocation. Use a relocation-aware DWARFDataExtractor overload (with
DWARFContext and a reference to its internal .eh_frame representation) to decode
addresses correctly. In an object file, most sections have addresses of zero. So
the displayed addresses are almost always offsets relative to the start of the
associated text section.
DWARFContext::create handles .eh_frame and .rela.eh_frame by itself, so if there
are more than one .eh_frame (technically possible, but almost always erronerous
in practice), this will only handle the first one. Supporting multiple
.eh_frame is beyond the scope of this patch.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D84106
In addition, move the definition of the class into the Debugify.h,
so we can use it from different levels.
The motivation for this is D82547.
Differential Revision: https://reviews.llvm.org/D83391
Newly-added test previously crashed.
While it is up for debate whether or not instruction reduction
should be indiscriminate in instruction dropping (there you can
just ensure that the test case is still -verify'ies), here
if we drop terminator, CloneFunctionInto() will immediately crash.
So let's not do that :)
This matches LLD and fixes https://sourceware.org/bugzilla/show_bug.cgi?id=26262#c1
.o is a bad choice for save-temps output because it is easy to override the bitcode file (*.o)
```
# Use bfd for the example, -fuse-ld=gold is similar.
clang -flto -c a.c # generate bitcode file a.o
clang -fuse-ld=bfd -flto a.o -o a -Wl,-plugin-opt=save-temps # override a.o
# The user repeats the command but get surprised, because a.o is now a combined module.
clang -fuse-ld=bfd -flto a.o -o a -Wl,-plugin-opt=save-temps
```
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D84132
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
There is a strange "feature" of the code: it handles all relocations as `Elf_Rela`.
For handling `Elf_Rel` it converts them to `Elf_Rela` and passes `bool IsRela` to
specify the real type everywhere.
A related issue is that the
`decode_relrs` helper in lib/Object has to return `Expected<std::vector<Elf_Rela>>`
because of that, though it could return a vector of `Elf_Rel`.
I think we should just start using templates for relocation types, it makes the code
cleaner and shorter. This patch does it.
Differential revision: https://reviews.llvm.org/D83871
It fixes/improves the following:
1) Some code was duplicated.
2) A "The .MIPS.abiflags section has a wrong size" error was not reported as a warning,
but was printed to stdout for the LLVM style. Also, it was reported as an error for the GNU style.
This patch changes the behavior to be consistent and to report warnings.
3) `unwrapOrError()` was used before, now a warning is reported instead.
Differential revision: https://reviews.llvm.org/D84033
The function extractArgumentsFromModule() was passing a one-based index to,
but replaceFunctionCalls() was expecting a zero-based argument index. This
resulted in assertion errors when reducing function call arguments with
different types. Additionally, the
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D84099
.gcno, .gcda and source files can be modified while we are reading them. If the
concurrent modification of a file being read nullifies the NUL terminator
assumption, llvm-cov can trip over an assertion failure in MemoryBuffer::init.
This is not so rare - the source files can be in an editor and .gcda can be
written by an running process (if the process forks, when .gcda gets written is
probably more unpredictable).
There is no accompanying test because an assertion failure requires data
races with some involved setting.
Under NPM, the asan-globals-md analysis is required but cannot be run
within the asan function pass due to module analyses not being able to
run from a function pass. So this pins all tests using "-asan" to the
legacy PM and adds a corresponding RUN line with
-passes='require<asan-globals-md>,function(asan)'.
Now all tests in Instrumentation/AddressSanitizer pass when
-enable-new-pm is by default on.
Tests were automatically converted using the following python script and
failures were manually fixed up.
import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -asan -asan-module ' in l and '\\' not in l:
f.write(l.replace(' -asan -asan-module ', ' -asan -asan-module -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan -asan-module ', " -passes='require<asan-globals-md>,function(asan),module(asan-module)' "))
f.write('\n')
elif "RUN:" in l and ' -asan ' in l and '\\' not in l:
f.write(l.replace(' -asan ', ' -asan -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan ', " -passes='require<asan-globals-md>,function(asan)' "))
f.write('\n')
else:
f.write(l)
f.write('\n')
See https://bugs.llvm.org/show_bug.cgi?id=46611.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D83921
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In D83482 we agreed to name e_* fields that are used for overriding
values (like e_phoff) as EPh* (e.g. EPhOff).
Currently we have a set of e_sh* fields that are named inconsistently
with this rule. This patch renames all of them.
Differential revision: https://reviews.llvm.org/D83766
This patch adds support for archive files as inputs to llvm-link. One
of the use-cases is for OpenMP, where device specific libraries need
to be extracted from libraries containing bundled object files. The
clang-offload-bundler will support extracting these archives, which
will be passed into llvm-link, see https://reviews.llvm.org/D80816.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D81109
llvm-objdump currently calls report_fatal_error() when the e_phoff field is invalid.
This is tested by elf-invalid-phdr.test which has the following issues:
1) It uses a precompiled object.
2) it could be a part of invalid.test.
3) It tests the Object lib, but we have no separate test for llvm-objdump.
This patch addresses issues mentioned.
Differential revision: https://reviews.llvm.org/D83559
program_headers() returns the list of program headers. This change allows
to continue attempt of dumping when something is wrong with program headers.
Differential revision: https://reviews.llvm.org/D83554
This adds `EPhOff`, `EPhEntSize` and `EPhNum` keys.
Will be useful for creating broken objects for testing llvm-readelf.
Differential revision: https://reviews.llvm.org/D83482
We have an issue currently: --dyn-relocations always prints the following
relocation header when dumping `DynPLTRelRegion`:
"Offset Info Type Symbol's Value Symbol's Name + Addend"
I.e. even for an empty object, --dyn-relocations still prints this.
It is a easy to fix bug, but we have no dedicated test case for this option.
(we have a dynamic-reloc-no-section-headers.test, which has a slightly different purpose).
This patch adds a test and fixes the behavior.
Differential revision: https://reviews.llvm.org/D83387
Summary:
This handles all three places where attributes could currently be - `GlobalVariable`, `Function` and `CallBase`.
For last two, it correctly handles all three possible attribute locations (return value, arguments and function itself)
There was a previous attempt at it D73853,
which was committed in rGfc62b36a000681c01e993242b583c5ec4ab48a3c,
but then reverted all the way back in rGb12176d2aafa0ccb2585aa218fc3b454ba84f2a9
due to some (osx?) test failures.
Reviewers: nickdesaulniers, dblaikie, diegotf, george.burgess.iv, jdoerfert, Tyker, arsenm
Reviewed By: nickdesaulniers
Subscribers: wdng, MaskRay, arsenm, llvm-commits, mgorny
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83351
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
There's no reason to introduce a new option for the NPM.
The various PGO options are shared in this manner.
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D83368
Summary:
I think, this results in much more understandable/readable flow.
At least the original logic was perhaps the most hard thing for me to grasp when taking an initial look on the delta passes.
Reviewers: nickdesaulniers, dblaikie, diegotf, george.burgess.iv
Reviewed By: nickdesaulniers
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83287
This is a follow-up for D83225. This does the following:
1) Adds missing tests for existent errors.
2) Stops using `unwrapOrError` to propagate errors to caller.
(I am trying to get rid of all `unwrapOrErr` calls in the llvm-readelf code).
3) Improves error messages reported slightly.
Differential revision: https://reviews.llvm.org/D83314
`MipsGOTParser` is a helper class that is used to dump MIPS GOT and PLT.
There is a problem with it: it might call report_fatal_error() on invalid input.
When this happens, the tool reports a crash:
```
# command stderr:
LLVM ERROR: Cannot find PLTGOT dynamic table tag.
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backt
race.
Stack dump:
...
```
Such error were not tested. In this patch I've refactored `MipsGOTParser`:
I've splitted handling of GOT and PLT to separate methods. This allows to propagate
any possible errors to caller and should allow to dump the PLT when something is wrong
with the GOT and vise versa in the future.
I've added tests for each `report_fatal_error()`
and now calling the `reportError` instead. In the future we might want to switch to
reporting warnings, but it requres the additional testing and should
be performed independently.
I've kept `unwrapOrError` calls untouched for now as I'd like to focus on eliminating
`report_fatal_error` calls in this patch only.
Differential revision: https://reviews.llvm.org/D83225
Currently, llvm-readobj calls `report_fatal_error` when an object has
both REL and RELA dynamic relocations.
llvm-readelf is able to handle this case properly. This patch adds such a test case
and adjusts the llvm-readobj code to follow (and be consistent with its own RELR and PLTREL cases).
Differential revision: https://reviews.llvm.org/D83232
It is possible to:
1) Avoid using the `unwrapOrError` calls and hence allow to continue dumping even when
something is not OK with one of SHT_LLVM_LINKER_OPTIONS sections.
2) replace `reportWarning` with `reportUniqueWarning` calls. In this method it is no-op,
because it is not possible to have a duplicated warnings anyways, but since we probably
want to switch to `reportUniqueWarning` globally, this is a good thing to do.
This patch addresses both these points.
Differential revision: https://reviews.llvm.org/D83131
This introduces `printHashTableSymbols` and
`printGNUHashTableSymbols` to split the `printHashSymbols`.
It makes the code more readable and consistent.
Differential revision: https://reviews.llvm.org/D83040
This is a followup for D83129.
It is possible to make `getStaticSymbolName` report warnings inside
and return the "<?>" on a error. This allows to encapsulate errors handling
and slightly simplifies the logic in callers code.
Differential revision: https://reviews.llvm.org/D83208
The code we have currently reports an error if something is not right with the
profile section. Instead we can report a warning and continue dumping when it is possible.
This patch does it.
Differential revision: https://reviews.llvm.org/D83129
We might crash when the dynamic symbols table is empty (or not found)
and --hash-symbols is requested. Both .hash and .gnu.hash logic is affected.
The patch fixes this issue.
Differential revision: https://reviews.llvm.org/D83037
This diff merges all options for llvm-install-name-tool under a single
function processLoadCommands. Also adds another test case for -add_rpath
option.
Test plan: make check-all
Reviewed by: jhenderson, alexshap, smeenai, Ktwu
Differential Revision: https://reviews.llvm.org/D82812
Summary:
This would have been marginally useful to me during/for rG7ea46aee3670981827c04df89b2c3a1cbdc7561b.
With ongoing migration to representing assumes via operand bundles on the assume, this will be gradually more useful.
Reviewers: nickdesaulniers, diegotf, dblaikie, george.burgess.iv, jdoerfert, Tyker
Reviewed By: nickdesaulniers
Subscribers: hiraditya, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83177
This diff merges all options for llvm-install-name-tool under a single
function processLoadCommands. Also adds another test case for -add_rpath
option.
Test plan: make check-all
Reviewed by: jhenderson, alexshap, smeenai, Ktwu
Differential Revision: https://reviews.llvm.org/D82812
The new option works like the existing LLVM_TABLEGEN, and
LLVM_CONFIG_PATH options. Instead of building llvm-nm, the build uses
the executable defined by LLVM_NM.
This is useful for cross-compilation scenarios where the host cannot run
the cross-compiled tool, and recursing into another cmake build is not
an option (due to required DEFINE's, for example).
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D83022
This patch resolves crash that occurs when user wanted to remove all
symbols and add a brand new one using:
```
llvm-objcopy -R .symtab --add-symbol foo=1234 in.o out.o
```
Before these changes the symbol table internally being null when adding
new symbols. For now we will regenerate symtab in this case.
This fixes: https://bugs.llvm.org/show_bug.cgi?id=43930
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82935
As it can be seen in newly-added (previously-crashing) test-case,
there can be a situation where multiple GV's are used in instr,
and we would schedule the same instruction to be deleted several times,
crashing when trying to delete it the second time.
We could either store WeakVH (done here), or use something set-like.
I think using WeakVH is prevalent in these cases elsewhere.
As it can be seen in newly-added (previously-crashing) test-case,
there can be a situation where multiple arguments are used in instr,
and we would schedule the same instruction to be deleted several times,
crashing when trying to delete it the second time.
We could either store WeakVH (done here), or use something set-like.
I think using WeakVH is prevalent in these cases elsewhere.
This patch helps add the missing context `IsGNUStyle`. Before this patch, yaml2obj cannot parse the YAML description of 'debug_gnu_pubnames' and 'debug_gnu_pubtypes' correctly due to the missing context.
In other words, if we have
```
DWARF:
debug_gnu_pubtypes:
Length:
TotalLength: 0x1234
Version: 2
UnitOffset: 0x1234
UnitSize: 0x4321
Entries:
- DieOffset: 0x12345678
Name: abc
Descriptor: 0x00 ## Descriptor can never be mapped into Entry.Descriptor
```
yaml2obj will complain that "error: unknown key 'Descriptor'".
This patch helps resolve this problem.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82435
This is a follow-up for D82955, which allows to continue dumping when a symbol table is broken.
When we are unable to get the string table and trying to print symbols,
the existent tool logic together with D82955 reports an error:
"st_name (0x??) is past the end of the string table of size 0x??"
Though, when there is no string table, this message becomes misleading and excessive.
It is easy to fix it though and that is what this patch does.
Differential revision: https://reviews.llvm.org/D83042
When the --symbols option/--dyn-symbols is given we might report an
error and exit when something goes not right. E.g. when the SHT_SYMTAB
section is broken. Though we could report a warning and try to continue
dumping instead in many cases.
This patch removes `unwrapOrErr` calls from the code involved in the
flow described.
Differential revision: https://reviews.llvm.org/D82955
gnu size has a number of special cases regarding REL, RELA and STRTAB
sections being considered in size output. To avoid unnecessary
complexity this commit makes llvm size outputs these sections in cases
they have the SHF_ALLOC flag.
Differential Revision: https://reviews.llvm.org/D82479
When we deriving the number of symbols from the DT_HASH table, we can crash when
calculate the number of symbols in the symbol table when SHT_DYNSYM
has sh_entsize == 0.
The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82877
Implement `-change` option for install-name-tool. The behavior exactly
matches that of cctools. Depends on D82410.
Reviewed By: jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D82613
Implement `-id` option for install-name-tool. Differences from cctool's
behavior:
- Does **NOT** throw an error if multiple -id options are specified.
Instead, picks the last one.
- Throws an error in case empty id is specified.
Reviewed By: jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D82410
Currently we have to override all macros that are declared. But in many
cases it is convenient to use default values and to override only
a particular one or two.
This provides a way to set a default value for any macro:
```
Symbols:
- Name: [[FOO=foo]]
```
Differential revision: https://reviews.llvm.org/D82455
'InitialLength' is replaced with 'Format' (DWARF32 by default) and 'Length' in this patch.
Besides, test cases for DWARFv4 and DWARFv5, DWARF32 and DWARF64 is
added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82622
This diff addresses the old TODO in MachOObjcopy.cpp and
correctly sets the page size used for alignment of segments.
In particular, now llvm-objcopy's output is consistent
with the input (the alignment of vmsize doesn't change).
Test plan:
1. make check-all
2. verify that a binary copied via llvm-objcopy now correctly works on iOS.
Differential revision: https://reviews.llvm.org/D82503
SHT_GROUP sections contain a reference to a symbol indicating their
"signature" symbol. The symbol table containing this symbol is referred
to by the group section's sh_link field. If llvm-objcopy is instructed
to remove the symbol table, it will emit an error.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46153.
Reviewed By: jhenderson, Higuoxing
Differential Revision: https://reviews.llvm.org/D82274
This diff implements -rpath option for llvm-install-name-tool
which replaces the rpath value in the specified Mach-O binary.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D82051
LBR contains (up to) 16 entries for last x branches and the X86LBRCounter (from D77422) should be able to return all those.
Currently, it just returns the latest entry, which could lead to mis-leading measurements.
This patch aslo changes the LatencyBenchmarkRunner to accommodate multi-value readings.
https://reviews.llvm.org/D81050
Summary: Dumping contents of `.llvm.call-graph-profile` section of COFF in the same format as ELF.
Reviewers: jhenderson, MaskRay, hans
Reviewed By: jhenderson
Subscribers: grimar, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81894
Summary:
This somewhat matches the --aa-pipeline option, which separates out any
AA analyses to make sure they run before other passes.
Makes check-llvm failures under new PM go from 2356 -> 2303.
AA passes are not handled by PassBuilder::parsePassPipeline() but rather
PassBuilder::parseAAPipeline(), which is why this fixes some failures.
Reviewers: asbirlea, hans, ychen, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82488
There is no reason to report an error in `printSectionHeaders()`, we can report
a warning and continue dumping. This is what the patch does.
Differential revision: https://reviews.llvm.org/D82462
Summary:
Add the --hot-func-list feature to llvm-profdata show for sample profiles. This feature prints a list of hot functions whose max sample count are above the 99% threshold, with their numbers of total samples, total samples percentage, max samples, entry samples, and their function names.
Test Plan:
Reviewers: wenlei, hoyFB
Reviewed By: wenlei, hoyFB
Subscribers: hoyFB, wenlei, weihe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82355
This diff updates the help messages for llvm-objcopy, llvm-strip and
llvm-install-name-tool.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D81907
Start using the `checkGNUHashTable` helper which was recently introduced to report
a proper warning when a GNU hash table goes past the end of the file.
Differential revision: https://reviews.llvm.org/D82449
Summary:
In order to enable mass testing of opt under NPM, specifically passes
specified via -foo-pass.
This is gated under a new opt flag -enable-new-pm. Currently
the pass flag parser looks for legacy PM passes with the name "foo" (for
opt arg "-foo") and creates a PassInfo for each one. Here we take the
(legacy PM) pass name and try to match it with one defined in (NPM)
PassRegistry.def. Ultimately if we want all tests to pass like this,
we'll need to port all passes to NPM and register them in
PassRegistry.def under the same name as they were reigstered in the
legacy PM.
Maybe at some point we'll migrate all -foo to --passes=foo, but that
would be after the NPM switch.
Flipping on the flag causes 2XXX failures under check-llvm. By far most
of them are passes either not ported to NPM or don't have the same name
in PassRegistry.def as their old name.
Reviewers: hans, echristo, asbirlea, leonardchan
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82320
This diff adds support for deleting an rpath from a Mach-O binary.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D81527
Summary:
Currently when --passes is used, any passes specified via -foo are
ignored. Explicitly bail out when that happens.
This requires changing some tests. Most were straightforward, but
codegenprepare-produced-address-math.ll is tricky. One of its RUNs runs
CodeGenPrepare. I tried porting CodeGenPrepare to the NPM, but ended up
getting stuck when I needed a TargetMachine. NPM doesn't have support
for MachineFunctions yet. So I just deleted that RUN line, since it was
mass-added in https://reviews.llvm.org/D54848 and is likely not that
useful.
Reviewers: echristo, hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82271
We have a division by zero crash currently when
the sh_entzize of the dynamic symbol table is 0.
Differential revision: https://reviews.llvm.org/D82180
It is possible to trigger a crash when a dynamic symbol has a
broken (too large) st_name and the DT_STRSZ is also broken.
We have the following code in the `Elf_Sym_Impl<ELFT>::getName`:
```
template <class ELFT>
Expected<StringRef> Elf_Sym_Impl<ELFT>::getName(StringRef StrTab) const {
uint32_t Offset = this->st_name;
if (Offset >= StrTab.size())
return createStringError(object_error::parse_failed,
"st_name (0x%" PRIx32
") is past the end of the string table"
" of size 0x%zx",
Offset, StrTab.size());
...
```
The problem is that `StrTab` here is a `ELFDumper::DynamicStringTab` member
which is not validated properly on initialization. So it is possible to bypass the
`if` even when the `st_name` is huge.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82201
Fixes an issue with missing nul-terminators and saves us some string
copying, compared to a version which would insert nul-terminators.
Differential Revision: https://reviews.llvm.org/D82033
Summary: Add the --hot-func-list feature to llvm-profdata show for sample profiles. This feature prints a list of hot functions whose max sample count are above the 99% threshold, with their numbers of total samples, total samples percentage, max samples, entry samples, and their function names.
Reviewers: wmi, hoyFB, wenlei
Reviewed By: wmi
Subscribers: hoyFB, wenlei, llvm-commits, weihe
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81800
These are documented as using modrm byte of 0xe8, 0xf0, and 0xf8
respectively. But hardware ignore bits 2:0. So 0xe9-0xef is treated
the same as 0xe8. Similar for the other two.
Fixing this required adding 8 new formats to the X86 instructions
to convey this information. Could have gotten away with 3, but
adding all 8 made for a more logical conversion from format to
modrm encoding.
I renumbered the format encodings to keep the register modrm
formats grouped together.
Similar to D81937, we might crash when printing a histogram for a GNU hash table
with a 'symndx' index that is larger than the number of dynamic symbols.
This patch adopts and reuses the `getGnuHashTableChains()` helper which performs
a validation of the table. As a side effect the warning reported for
the --gnu-hash-table was improved.
Also with this change we start to report a warning when the histogram is requested for
the GNU hash table, but the dynamic symbols table is empty (size == 0).
Differential revision: https://reviews.llvm.org/D82010
Summary: Rename --elf-cg-profile to --cg-profile and keep --elf-cg-profile as an alias of --cg-profile.
Reviewers: jhenderson, MaskRay, espindola, hans
Reviewed By: jhenderson, MaskRay
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81855
Force linking llvm-exegesis to static LLVM libraries instead of dylib
to prevent duplicate symbols due to linking both. Ideally, we'd want
to link to the dylib only here but the target sub-libraries use hidden
symbols from LLVM target libraries and therefore linking the dylib
fails.
Differential Revision: https://reviews.llvm.org/D81922
Fix the CMake rules for LLVMCFIVerify library not to pull duplicate
LLVM .a libraries when linking to the dylib. This prevents problems
due to duplicate symbols and apparently fixes mingw32.
This is an alternative approach to D44650 that just forces .a libraries
instead. However, there doesn't seem to be any reason to do that.
Differential Revision: https://reviews.llvm.org/D81921
`Elf_GnuHash_Impl` has the following method:
```
ArrayRef<Elf_Word> values(unsigned DynamicSymCount) const {
return ArrayRef<Elf_Word>(buckets().end(), DynamicSymCount - symndx);
}
```
When DynamicSymCount is less than symndx we return an array with the huge broken size.
This patch fixes the issue and adds an assert. This assert helped to fix an issue
in one of the test cases.
Differential revision: https://reviews.llvm.org/D81937
`printGnuHashTable` contains the code to check the GNU hash table.
This patch splits it to `getGnuHashTableChains` helper
(and reorders slightly to reduce).
Differential revision: https://reviews.llvm.org/D81928
If .gcda is corrupted, gcov continues to produce a .gcov and just
assumes execution counts are zeros. This is reasonable, because the
program can corrupt its .gcda output. The code path should be similar to
the code path without .gcda.
Between gcov 4.9~8, `gcov -i $file` prints coverage information to
$file.gcov in an intermediate text format (single file, instead of
$source.gcov for each source file).
lcov newer than 2019-05-24 detects -i support and uses it to increase
processing speed. gcov 9 (GCC r265587) removed --intermediate-format
and -i was changed to mean --json-format. However, we consider this
format still useful and support it. geninfo (part of lcov) supports this
format even if we announce that we are compatible with gcov 9.0.0
Previously we only printed a symbol value when it has a non-empty name
or non-zero value.
This patch changes the behavior. Now we only omit a symbols value when
a relocation does not reference a symbol (i.e. symbol index == 0).
Seems it is what GNU readelf does, looking on its output.
Differential revision: https://reviews.llvm.org/D81842
Currently, llvm-readelf crashes when there is a STT_SECTION symbol for the null section
and this symbol is used in a relocation.
Differential revision: https://reviews.llvm.org/D81840
The patch adds an option `--dwarf64` to instruct a tool to generate
debug information in the 64-bit DWARF format. There is no real
implementation yet, only a few compatibility checks.
Differential Revision: https://reviews.llvm.org/D81143
This diff adds support for copying binaries
containing a LC_CODE_SIGNATURE load command.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D81768
This adds 4 new reloc types.
A lot of code that previously assumed any memory or offset values could be contained in a uint32_t (and often truncated results from functions returning 64-bit values) have been upgraded to uint64_t. This is not comprehensive: it is only the values that come in contact with the new relocation values and their dependents.
A new tablegen mapping was added to automatically upgrade loads/stores in the assembler, which otherwise has no way to select for these instructions (since they are indentical other than for the offset immediate). It follows a similar technique to https://reviews.llvm.org/D53307
Differential Revision: https://reviews.llvm.org/D81704
Summary:
This commit slightly modifies the MCDisassembler, and llvm-objdump to
allow targets to also decode entire symbols.
WebAssembly uses the onSymbolStart hook it to decode preludes.
WebAssembly partially disassembles the symbol in its target specific
way; and then falls back to the normal flow of llvm-objdump.
AMDGPU needs it to decode kernel descriptors entirely, and move to the
next symbol.
This commit is to split the above task into 2.
- Changes to llvm-objdump and MC-layer without breaking WebAssembly code
[ this commit ]
- AMDGPU's implementation of onSymbolStart that decodes kernel
descriptors. [ https://reviews.llvm.org/D80713 ]
Reviewers: scott.linder, t-tye, sunfish, arsenm, jhenderson, MaskRay, aardappel
Reviewed By: scott.linder, jhenderson, aardappel
Subscribers: bcain, dschuff, wdng, tpr, sbc100, jgravelle-google, hiraditya, aheejin, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80512
Fix the calculation of the field cmdsize (in the function buildRPathLoadCommand)
to account for the null byte terminator.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D81575
Summary:
This completes the needed glueing to support reading tbd files from nm.
This includes specifying which slice filtering with `--arch` and a new
option specifically for tbd files `--add-inlinedinfo` which will show
the reexported libraries that are appended in the tbd file.
Reviewers: ributzka, steven_wu, JDevlieghere, jhenderson
Reviewed By: JDevlieghere
Subscribers: hiraditya, MaskRay, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81614
This reverts part of D81156.
Accessing errs() concurrently was safe before and racy after D81156.
(`errs() << 'a'` is always racy)
Accessing outs() and errs() concurrently was safe before and racy after D81156.
Don't tie errs() to outs() by default to fix the fallout.
llvm-dwarfdump is single-threaded and opting in the tie behavior is safe.
Place the instruction at the 24th column (0-based indexing), matching
GNU objdump ARM/AArch64/powerpc/etc when the address is low.
This is beneficial for non-x86 targets which have short instruction
lengths.
```
// GNU objdump AArch64
0: 91001062 add x2, x3, #0x4
400078: 91001062 add x2, x3, #0x4
// llvm-objdump, with this patch
0: 62 10 00 91 add x2, x3, #4
400078: 62 10 00 91 add x2, x3, #4
// llvm-objdump, if we change to print a word instead of bytes in the future
0: 91001062 add x2, x3, #4
400078: 91001062 add x2, x3, #4
// GNU objdump Thumb
0: bf00 nop
// GNU objdump Power ISA 3.1 64-bit instruction
// 0: 00 00 10 04 plwa r3,0
// 4: 00 00 60 a4
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81590
Multiple times we faced an issue of huge outputs due to unexpected behavior
or incorrect test cases. The last one was https://reviews.llvm.org/D80629#2073066.
This patch limits the output to 10 Mb for ELF and introduces the --max-size to change this
limit.
I've tried to keep the implementation non-intrusive.
The current logic we have is that we prepare section content in a buffer first and write
it to the output later. This patch checks the available limit on each writing attempt to this buffer
and stops writing when the limit is reached and raises the internal error flag.
Later, this flag is is checked before the actual writing to a file happens and
an error is reported.
Differential revision: https://reviews.llvm.org/D81258
Reorder `DumpSection` under `handleArgs` in file `MachOObjcopy.cpp`. The
operation to dump a section is now performed before both add and remove
section operations for MachO file format.
Change for the ELF format at D81097. Together fixes
https://bugs.llvm.org/show_bug.cgi?id=44283
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81123
Reorder `DumpSection` under `handleArgs` in file `ELFObjcopy.cpp`.
`DumpSection` is placed before `replaceAndRemoveSections` and is
therefore now the first operation under `handleArgs`. Thus, it is now
performed before both `add` and `remove` section operations.
Change for the MachO format at D81123. Together fixes https://bugs.llvm.org/show_bug.cgi?id=44283.
Reviewed By: alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D81097
It updates two error messages under `performOperation` in the file
llvm-ar.cpp. Furthermore, it also updates tests that print out these
error messages: `llvm/test/Object/ar-create.test` and
`llvm/test/tools/llvm-ar/print.test`.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D80846
Treat N_AST symbol table entries like other debug entries and don't emit
them in the linked binary.
Differential revision: https://reviews.llvm.org/D81205
This patch addresses the comment in [D80972](https://reviews.llvm.org/D80972#inline-744217).
Before this patch, the initial length field of .debug_aranges section should be declared as:
```
## 32-bit DWARF
debug_aranges:
- Length:
TotalLength: 0x20
Version: 2
...
## 64-bit DWARF
debug_aranges:
- Length:
TotalLength: 0xffffffff
TotalLength64: 0x20
Version: 2
...
```
After this patch:
```
## 32-bit DWARF
debug_aranges:
- [[Format: DWARF32]] ## Optional
Length: 0x20
Version: 2
...
## 64-bit DWARF
debug_aranges:
- Format: DWARF64
Length: 0x20
Version: 2
```
Current implementation of generating DWARF64 .debug_aranges section is buggy. A follow-up patch will improve it and add test cases for DWARF64.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81063
We have unobvious issue in the condition that is used to check
that we do not read past the EOF.
The problem is that the result of "GnuHashTable->nbuckets * 4" expression is uint32.
Because of that it was still possible to overflow it and pass the check.
There was no such problem with the "GnuHashTable->maskwords * sizeof(typename ELFT::Off)"
condition, because of `sizeof` on the right (which gives 64-bits value on x64),
but I've added an explicit conversion to 64-bit value for `GnuHashTable->maskwords` too.
Differential revision: https://reviews.llvm.org/D81103
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
Summary:
Using a .data() member on a StringRef was discarding the StringRef
size, breaking llvm-exegesis on machines with counter sums (e.g.
Zen2).
Reviewers: oontvoo
Subscribers: mstojanovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80982
This flag (and the whole field DT_FLAGS_1) originated from Solaris. I intend to use it in an LLD patch D80872.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D80871
Partially reverts feee98645d.
Add explicit braces to a different place to fix
"error: add explicit braces to avoid dangling else [-Werror,-Wdangling-else]"
This improves the next points for broken hash tables:
1) Use reportUniqueWarning to prevent duplication when
--hash-table and --elf-hash-histogram are used together.
2) Dump nbuckets and nchain fields. It is often possible
to dump them even when the table itself goes past the EOF etc.
Differential revision: https://reviews.llvm.org/D80373
As noticed by dblaikie.
I don't know what code paths using reportError can cause stdout output
to be interleaved with stderr, so no test is added now.
Also drop an unneeded use of errs().fflush() in reportWarning().
I requested this in D64165.
Last we looked at this and couldn't come up with a reason to change
it, but with a pragma for full loop unrolling we bypass every other
loop unroll and then fail to fully unroll a loop when the pragma is set.
Move the OnlyWhenForced out of the check and into the initialization
of the full unroll pass in the new pass manager. This doesn't show up
with the old pass manager.
Add a new option to opt so that we can turn off loop unrolling
manually since this is a difference between clang and opt.
Tested with check-clang and check-llvm.
It would be nice to switch to `reportUniqueWarnings` from
`reportError` in this class, but first of all it needs a cleanup.
This patch:
1) Eliminates autos.
2) Removes code duplication.
3) Changes how the code works with `Expected<>`.
4) Introduces 2 new `using`s to make the code a bit shorter.
Differential revision: https://reviews.llvm.org/D80726
When a group member is removed, the corresponding record in the
SHT_GROUP section has to be deleted.
This fixes PR46064.
Differential Revision: https://reviews.llvm.org/D80568
When a SHT_GROUP section is removed, but other sections of the group are
kept, the SHF_GROUP flag of these sections should be dropped, otherwise
the resulting ELF file will be malformed.
Differential Revision: https://reviews.llvm.org/D80511
This patch helps make the `PubSection` optional in the DWARF structure.
Reviewed By: jhenderson, aprantl
Differential Revision: https://reviews.llvm.org/D80722
llvm-readelf might crash when the .gnu.hash table goes past the EOF.
This patch splits and updates the code of a helper function `checkGNUHashTable`,
which is similar to `checkHashTable` and fixes the issue.
Differential revision: https://reviews.llvm.org/D80215
This patch adds a jitlink pass, 'registerELFGraphInfo', that records section
and symbol information about each LinkGraph in the llvm-jitlink session object.
This allows symbols and sections to be referred to by name in llvm-jitlink
regression tests. This will enable a testcase to be written for
https://reviews.llvm.org/D80613.
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Currently sanitizers + LTO don't work together under the new pass
manager, so I removed tests that checked that this combination works for
sancov.
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
Summary:
Define ELF binary code for VE and modify code where should use this new code.
Depends on D79544.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79545
When the p_offset/p_filesz of the PT_GNU_EH_FRAME is invalid
(e.g larger than the file size) then llvm-readobj might crash.
This patch fixes the issue. I've introduced `ELFFile<ELFT>::getSegmentContent`
method, which is very similar to `ELFFile<ELFT>::getSectionContentsAsArray` one.
Differential revision: https://reviews.llvm.org/D80380
As was mentioned in review comments for D80204,
`printHashHistogram` has 2 lambdas that are probably too large
and deserves splitting into member functions.
This patch does it.
Differential revision: https://reviews.llvm.org/D80546
When the `--elf-hash-histogram` is used, the code first tries to build
a histogram for the .hash table and then for the .gnu.hash table.
The problem is that dumper might return early when unable or do not need to
build a histogram for the .hash.
This patch reorders the code slightly to fix the issue and adds a test case.
Differential revision: https://reviews.llvm.org/D80204
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
Summary:
This patch makes the following changes to SanCov and its complementary Python script in order to resolve issues pertaining to non-UNIX file paths in JSON symbolization information:
* Convert all paths to use forward slash.
* Update `coverage-report-server.py` to correctly handle paths to sources which contain spaces.
* Remove Linux platform restriction for all SanCov unit tests. All SanCov tests passed when ran on my local Windows machine.
Patch by Douglas Gliner.
Reviewers: kcc, filcab, phosek, morehouse, vitalybuka, metzman
Reviewed By: vitalybuka
Subscribers: vsk, Dor1s, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D51018
Summary: When I try to extract a basic block using llvm-extract, it erroneously reports that the named basic block doesn't exist. After digging into the code, it appears to be iterating over an unmaterialized function, which will fail to match any basic blocks.
Reviewers: volkan, qcolombet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80346
Summary: With complex IR, the difference engine can enter an inconsistent state where the instruction and block difference engines return different results. Prevent a crash by refusing to pop beyond the end of the vector.
Reviewers: rjmccall
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80351
Reproducer.cpp:70:12: error: could not convert ‘Repro’ from
‘std::unique_ptr<llvm::dsymutil::ReproducerGenerate,
std::default_delete<llvm::dsymutil::ReproducerGenerate> >’ to
‘llvm::Expected<std::unique_ptr<llvm::dsymutil::Reproducer> >’
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
Replace with forward declarations and move necessary includes down to source files.
Exposes an implicit dependency on TargetMachine.h in llvm-opt-fuzzer.cpp
For describing section/symbol names we can use unique suffixes,
e.g:
```
- Name: '.foo [1]`
- Name: '.foo [2]`
```
It can be a problem (see https://reviews.llvm.org/D79984#inline-734829),
because `[]` are sometimes used to describe a macros:
```
- Name: "[[a0]]"
```
Seems the better approach is to use something else, like "()".
This patch does it and refactors the code related.
Differential revision: https://reviews.llvm.org/D80123
verifyFunction/verifyModule don't assert or error internally. They
also don't print anything if you don't pass a raw_ostream to them.
So the caller needs to check the result and ideally pass a stream
to get the messages. Otherwise they're just really expensive no-ops.
I've filed PR45965 for another instance in SLPVectorizer
that causes a lit test failure.
Differential Revision: https://reviews.llvm.org/D80106
Previously, the option was only implemented for LLVM output. This fixes
https://bugs.llvm.org/show_bug.cgi?id=45695.
At the current time, GNU readelf does not support this option.
Consequently, this patch simply attempts to roughly follow the output
style for similar options like --syms/--notes etc, combined with
--string-dump output.
Reviewed by: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D79939
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
Imagine we have a broken .eh_frame.
Below is a possible sample output of llvm-readelf:
```
...
entry 2 {
initial_location: 0x10f5
address: 0x2080
}
}
}
.eh_frame section at offset 0x2028 address 0x2028:
LLVM ERROR: Parsing entry instructions at 0 failed
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace.
Stack dump:
0. Program arguments: /home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf -a 1
#0 0x000055f4a2ff5a1a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x2b9a1a)
...
#15 0x00007fdae5dc209b __libc_start_main /build/glibc-B9XfQf/glibc-2.28/csu/../csu/libc-start.c:342:3
#16 0x000055f4a2db746a _start (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x7b46a)
Aborted
```
I.e. it calls abort(), suggests to submit a bug report and exits with the code 134.
This patch changes the logic to propagate errors to callers.
This fixes the behavior for llvm-dwarfdump, llvm-readobj and other possible tools.
Differential revision: https://reviews.llvm.org/D79165
We might have a scenario where a the `GbuHashTable` variable correctly points
to a place inside the file (we validate this fact early in `parseDynamicTable`),
but nbuckets/maskwords fields are broken in the way the code tries
to read the data past the EOF. This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D79853
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Currently, llvm-dwarfdump's help message has two issues.
1. Most long options are printed in `--long-option`, except for some section dumping options, e.g., `-apple-names`, `-debug-addr`.
2. Most options are printed with consistent indention, except for some section dumping options.
This patch helps resolve these two issues.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79618
Summary: This allows DIEs with DW_AT_ranges to be encoded and decoded _and_ actually have their address ranges be included instead of having DW_AT_ranges with a section offset value for a section that doesn't exist.
Reviewers: labath, aprantl, JDevlieghere, dblaikie, probinson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78782
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
The internal flag -partial-profile in llvm conflicts with the flag with
the same name in llvm-profdata. The conflict happens in builds with
LLVM_LINK_LLVM_DYLIB enabled. In this case the tools are linked with libLLVM
and we end up with two definitions for the same cl::opt.
The patch renames llvm-profdata flag -partial-profile to -gen-partial-profile.
gcov by default prints to a .gcov file. With --stdout, stdout is used.
Some summary information is omitted. There is no separator for multiple
source files.
GCDAProfiling.c unnecessarily writes function names to .gcda files.
GCC 4.2 gcc/libgcov.c (now renamed to libgcc/libgcov*) did not write function
names. gcov-7 (compatible) crashes on .gcda produced by libclang_rt.profile
rL176173 realized the problem and introduced a mode to remove function
names.
llvm-cov code apparently takes GCDAProfiling.c output format as truth
and tries to decode function names. Additionally, llvm-cov tries to
decode tags in certain order which does not match libgcov emitted .gcda
files.
This patch fixes the .gcda decoder and makes it work with GCC 8 and 9
(10 is compatible with 9). Note, line statistics are broken and not
fixed by this patch.
Add test/tools/llvm-cov/gcov-{4.7,8,9}.c to test compatibility.
I noticed that std::error_code() does one-time initialization. Avoid
that overhead with Expected<T> and llvm::Error. Also, it is consistent
with the virtual interface and ELF, and generally cleaner.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79643
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
This change adds tests for llvm-nm, llvm-objdump and llvm-size when dumping symbol tables with invalid sh_size (sh_size % sizeof(Elf_Sym) != 0).
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D77864
Summary: Add -detailed-summary support for sample profile dump to match that of instrumentation profile.
Reviewers: wmi, davidxl, hoyFB
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79291
This patch threads the virtual file system through dsymutil.
Currently there is no good way to find out exactly what files are
necessary in order to reproduce a dsymutil link, at least not without
knowledge of how dsymutil's internals. My motivation for this change is
to add lightweight "reproducers" that automatically gather the input
object files through the FileCollectorFileSystem. The files together
with the YAML mapping will allow us to transparently reproduce a
dsymutil link, even without having to mess with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79376
Summary:
That unless the user requested an output object (--lto-obj-path), the an
unused empty combined module is not emitted.
This changed is helpful for some target (ex. RISCV-V) which encoded the
ABI info in IR module flags (target-abi). Empty unused module has no ABI
info so the linker would get the linking error during merging
incompatible ABIs.
Reviewers: tejohnson, espindola, MaskRay
Subscribers: emaste, inglorion, arichardson, hiraditya, simoncook, MaskRay, steven_wu, dexonsmith, PkmX, dang, lenary, s.egerton, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78988
Refering to the link order of a dylib better matches the terminology used in
static compilation. As upcoming patches will increase the number of places where
link order matters (for example when closing JITDylibs) it's better to get this
name change out of the way early.
Fixes PR44357
For ARM ELF, regions covered by data mapping symbols `$d` are dumped as `.byte`, `.short` or `.word` but inline relocations are not printed. This patch merges its loop into the normal instruction printing loop so that inline relocations are printed.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D79284
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
To avoid undefined behavior caught by -fsanitize=undefined on binary-paddr.test
void SectionWriter::visit(const Section &Sec) {
if (Sec.Type != SHT_NOBITS)
// Sec.Contents is empty while Sec.Offset may be out of bound
llvm::copy(Sec.Contents, Out.getBufferStart() + Sec.Offset);
}
Summary:
In D77860, we have changed `getSymbolFlags()` return type to `Expected<uint32_t>`.
This change helps bubble the error further up the stack.
Reviewers: jhenderson, grimar, JDevlieghere, MaskRay
Reviewed By: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79075
N_PEXT bit should not affect whether a symbol is considered to be external or not.
This also fixes the construction of the symbol table since it relies on the correct
ordering of symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78888
After SHF_ALLOC sections are ordered by LMA:
* If initial sections are empty, GNU objcopy skips their contents while we
emit leading zeros. (binary-paddr.test %t4)
* If trailing sections are empty, GNU objcopy skips their contents while we
emit trailing zeros. (binary-paddr.test %t5)
This patch matches GNU objcopy's behavior. Linkers don't keep p_memsz
PT_LOAD segments. Such empty sections would not have a containing
PT_LOAD and `Section::ParentSegment` might be null if linkers fail to
optimize the file offsets (lld D79254).
In particular, without D79254, the arm Linux kernel's multi_v5_defconfig
depends on this behavior: in `vmlinux`, an empty .text_itcm is mapped at
a very high address (0xfffe0000) but the kernel does not expect
`objcopy -O binary` to create a very large `arch/arm/boot/Image`
(0xfffe0000-0xc0000000 ~= 1GiB). See https://bugs.llvm.org/show_bug.cgi?id=45632
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79229
This patch is a NFC refactoring.
Currently the logic is overcomplicated, contains dead conditions and is very hard to read.
This patch performs a very straightforward simplification. Probably it can be
simplified and improved more, but we need to land test cases documenting/testing
all the current functionality first.
Differential revision: https://reviews.llvm.org/D78709
We do not verify the p_offset of the PT_INTERP header and tool may
crash when a program interpreter name string goes past the end of the file.
Differential revision: https://reviews.llvm.org/D79013
The debug directory payload is not located directly after the
debug directory entry itself, but can essentially be located anywhere
in the binary (even outside of mapped sections, although we don't
handle that case).
Differential Revision: https://reviews.llvm.org/D78921
According to the spec, the payload for debug directories can be
in parts of the binary that aren't mapped at runtime - in these
cases, AddressOfRawData is just set to zero.
Differential Revision: https://reviews.llvm.org/D78920
This is primarily motivated by the desire to move from Python2 to
Python3. `PYTHON_EXECUTABLE` is ambiguous. This explicitly identifies
the python interpreter in use. Since the LLVM build seems to be able to
completed successfully with python3, use that across the build. The old
path aliases `PYTHON_EXECUTABLE` to be treated as Python3.
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
This is primarily motivated by the desire to move from Python2 to
Python3. `PYTHON_EXECUTABLE` is ambiguous. This explicitly identifies
the python interpreter in use. Since the LLVM build seems to be able to
completed successfully with python3, use that across the build. The old
path aliases `PYTHON_EXECUTABLE` to be treated as Python3.
Fix handling of relocations with r_extern == 0.
If r_extern == 0 then r_symbolnum is an index of a section rather than a symbol index.
Patch by Seiya Nuta and Alexander Shaposhnikov.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78946
D63847 added `MCInstrAnalysis::evaluateMemoryOperandAddress()`. This patch
leverages the feature to print the target addresses for evaluable instructions.
```
-400a: movl 4080(%rip), %eax
+400a: movl 4080(%rip), %eax # 5000 <data1>
```
This patch also deletes `MIA->isCall(Inst) || MIA->isUnconditionalBranch(Inst) || MIA->isConditionalBranch(Inst)`
which is used to guard `MCInstrAnalysis::evaluateBranch()`
Reviewed By: jhenderson, skan
Differential Revision: https://reviews.llvm.org/D78776
This diff fixes the calculation of the field vmsize
in LC_SEGMENT/LC_SEGMENT_64 load commands.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78799
The library can parse DWARFv5 unit index sections of DWP files, but
llvm-dwp is not ready to process them. Refuse such input files for now.
Differential Revision: https://reviews.llvm.org/D77143
Follow-up of D78082 and D78590.
Otherwise, because xray_instr_map is now read-only, the absolute
relocation used for Sled.Function will cause a text relocation.
As reported here: https://reviews.llvm.org/D75153#1987272
Before, each instance of llvm-cov was creating one thread per hardware core, which wasn't needed probably because the number of inputs were small. This was probably causing a thread rlimit issue on large core count systems.
After this patch, the previous behavior is restored (to what was before rG8404aeb5):
If --num-threads is not specified, we create one thread per input, up to num.cores.
When specified, --num-threads indicates any number of threads, with no upper limit.
Differential Revision: https://reviews.llvm.org/D78408
The approach here is to create a new (empty) component, `Extensions', where all
statically compiled extensions dynamically register their dependencies. That way
we're more natively compatible with LLVMBuild and llvm-config.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44870
Differential Revision: https://reviews.llvm.org/D78192
Summary:
Continuing from D77285, the external interfaces implemented by
`ELFDump.cpp` are now declared in `ELFDump.h` and moved into the
`llvm::objdump` namespace. Externs defined in `ELFDump.cpp` that are
unreferenced externally are also made static.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Subscribers: RKSimon, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78695
LC_LOAD_WEAK_DYLIB is analogous to LC_LOAD_DYLIB and doesn't require any special handling.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78602
Georgii Rymar