We were bailing to two places if our runtime checks failed. If the initial overflow check failed, we'd go to ScalarPH. If any other check failed, we'd go to MiddleBlock. This caused us to have to have an extra PHI per induction and reduction as the vector loop's exit block was not dominated by its latch.
There's no need to have this behavior - if we just always go to ScalarPH we can get rid of a bunch of complexity.
llvm-svn: 246637
This reduces the complexity of createEmptyBlock() and will open the door to further refactoring.
The test change is simply because we're now constant folding a trivial test.
llvm-svn: 246634
It makes things easier to understand if this is in a helper method. This is part of my ongoing spaghetti-removal operation on createEmptyLoop.
llvm-svn: 246632
There's no need to widen canonical induction variables. It's just as efficient to create a *new*, wide, induction variable.
Consider, if we widen an indvar, then we'll have to truncate it before its uses anyway (1 trunc). If we create a new indvar instead, we'll have to truncate that instead (1 trunc) [besides which IndVars should go and clean up our mess after us anyway on principle].
This lets us remove a ton of special-casing code.
llvm-svn: 246631
Vectorized loops only ever have one induction variable. All induction PHIs from the scalar loop are rewritten to be in terms of this single indvar.
We were trying very hard to pick an indvar that already existed, even if that indvar wasn't canonical (didn't start at zero). But trying so hard is really fruitless - creating a new, canonical, indvar only results in one extra add in the worst case and that add is trivially easy to push through the PHI out of the loop by instcombine.
If we try and be less clever here and instead let instcombine clean up our mess (as we do in many other places in LV), we can remove unneeded complexity.
llvm-svn: 246630
This patch changes the analysis diagnostics produced when loops with
floating-point recurrences or memory operations are identified. The new messages
say "cannot prove it is safe to reorder * operations; allow reordering by
specifying #pragma clang loop vectorize(enable)". Depending on the type of
diagnostic the message will include additional options such as ffast-math or
__restrict__.
This patch also allows the vectorize(enable) pragma to override the low pointer
memory check threshold. When the hint is given a higher threshold is used.
See the clang patch for the options produced for each diagnostic.
llvm-svn: 246187
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
llvm-svn: 246149
... and move it into LoopUtils where it can be used by other passes, just like ReductionDescriptor. The API is very similar to ReductionDescriptor - that is, not very nice at all. Sorting these both out will come in a followup.
NFC
llvm-svn: 246145
This patch ensures that every analysis diagnostic produced by the vectorizer
will be printed if the loop has a vectorization hint on it. The condition has
also been improved to prevent printing when a disabling hint is specified.
llvm-svn: 246132
The loop minimum iterations check below ensures the loop has enough trip count so the generated
vector loop will likely be executed, and it covers the overflow check.
Differential Revision: http://reviews.llvm.org/D12107.
llvm-svn: 245952
and make it always preserve debug locations, since all callers wanted this
behavior anyway.
This is addressing a post-commit review feedback for r245589.
NFC (inside the LLVM tree).
llvm-svn: 245622
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
llvm-svn: 245193
AliasAnalysis.
Same as the other commits, the TLI access from an alias analysis is
going away and isn't very clean -- it is better to explicitly mark the
dependencies.
llvm-svn: 244785
This patch and a relatec clang patch solve the problem of having to explicitly enable analysis when specifying a loop hint pragma to get the diagnostics. Passing AlwasyPrint as the pass name (see below) causes the front-end to print the diagnostic if the user has specified '-Rpass-analysis' without an '=<target-pass>’. Users of loop hints can pass that compiler option without having to specify the pass and they will get diagnostics for only those loops with loop hints.
llvm-svn: 244555
This patch moves checking the threshold of runtime pointer checks to the vectorization requirements (late diagnostics) and emits a diagnostic that infroms the user the loop would be vectorized if not for exceeding the pointer-check threshold. Clang will also append the options that can be used to allow vectorization.
llvm-svn: 244523
This patch moves the verification of fast-math to just before vectorization is done. This way we can tell clang to append the command line options would that allow floating-point commutativity. Specifically those are enableing fast-math or specifying a loop hint.
llvm-svn: 244489
Sometimes interleaving is not beneficial, as determined by the cost-model and sometimes it is disabled by a loop hint (by the user). This patch modifies the diagnostic messages to make it clear why interleaving wasn't done.
llvm-svn: 244485
Summary:
This adds a hook to TTI which enables us to selectively turn on by default
interleaved access vectorization for targets on which we have have performed
the required benchmarking.
Reviewers: rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11901
llvm-svn: 244449
Create wrapper methods in the Function class for the OptimizeForSize and MinSize
attributes. We want to hide the logic of "or'ing" them together when optimizing
just for size (-Os).
Currently, we are not consistent about this and rely on a front-end to always set
OptimizeForSize (-Os) if MinSize (-Oz) is on. Thus, there are 18 FIXME changes here
that should be added as follow-on patches with regression tests.
This patch is NFC-intended: it just replaces existing direct accesses of the attributes
by the equivalent wrapper call.
Differential Revision: http://reviews.llvm.org/D11734
llvm-svn: 243994
The patch changes the SLPVectorizer::vectorizeStores to choose the immediate
succeeding or preceding candidate for a store instruction when it has multiple
consecutive candidates. In this way it has better chance to find more slp
vectorization opportunities.
Differential Revision: http://reviews.llvm.org/D10445
llvm-svn: 243666
part of simplifying its interface and usage in preparation for porting
to work with the new pass manager.
Note that this will likely expose that we have dead arguments, members,
and maybe even pass requirements for AA. I'll be cleaning those up in
seperate patches. This just zaps the actual update API.
Differential Revision: http://reviews.llvm.org/D11325
llvm-svn: 242881
change because the diff is *useless*. I assure you, I just switched to
early-return in this function.
Cleanup in preparation for my next commit, as requested in code review!
llvm-svn: 242880
This is useful when we want to do block frequency analysis
conditionally (e.g. only in PGO mode) but don't want to add
one more pass dependence.
Patch by congh.
Approved by dexonsmith.
Differential Revision: http://reviews.llvm.org/D11196
llvm-svn: 242248
I am planning to add more nested classes inside RuntimePointerCheck so
all these triple-nesting would be hard to follow.
Also rename it to RuntimePointerChecking (i.e. append 'ing').
llvm-svn: 242218
Passes should never modify it, just use the const version. While there
reduce copying in LoopInterchange. No functional change intended.
llvm-svn: 242041
The following functions are moved from the LoopVectorizer to VectorUtils:
- getGEPInductionOperand
- stripGetElementPtr
- getUniqueCastUse
- getStrideFromPointer
These used to be static functions in LoopVectorize, but will also be used by
the upcoming loop versioning LICM transformation.
Patch by Ashutosh Nema!
llvm-svn: 241980
Summary:
Following the discussion on r241884, it's more reasonable to assume that a
target has no vector registers by default instead of letting every such
target overrides getNumberOfRegisters.
Therefore, this patch modifies BasicTTIImpl::getNumberOfRegisters to
return 0 when Vector is true, and partially reverts r241884 which
modifies NVPTXTTIImpl::getNumberOfRegisters.
It also fixes a performance bug in LoopVectorizer. Even if a target has
no vector registers, vectorization may still help ILP. So, we need both
checks to be false before disabling loop vectorization all together.
Reviewers: hfinkel
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11108
llvm-svn: 241942
Place all code corresponding to a run-time check in one place.
Previously we generated some code, then proceeded to a next check, then
finished the code for the first check (like splitting blocks and
generating branches). Now the code for generating a check is
self-contained.
llvm-svn: 241741
James Molloy