This patch moves the jump address materialization inside the noop slide. This
enables patching of the materialization itself or its complete removal. This
patch also adds the ability to define scratch registers that can be used safely
by the code called from the patchpoint intrinsic. At least one scratch register
is required, because that one is used for the materialization of the jump
address. This patch depends on D2009.
Differential Revision: http://llvm-reviews.chandlerc.com/D2074
Reviewed by Andy
llvm-svn: 194306
The new graph structure replaces the node and edge linked lists with vectors.
Free lists (well, free vectors) are used for fast insertion/deletion.
The ultimate aim is to make PBQP graphs cheap to clone. The motivation is that
the PBQP solver destructively consumes input graphs while computing a solution,
forcing the graph to be fully reconstructed for each round of PBQP. This
imposes a high cost on large functions, which often require several rounds of
solving/spilling to find a final register allocation. If we can cheaply clone
the PBQP graph and incrementally update it between rounds then hopefully we can
reduce this cost. Further, once we begin pooling matrix/vector values (future
work), we can cache some PBQP solver metadata and share it between cloned
graphs, allowing the PBQP solver to re-use some of the computation done in
earlier rounds.
For now this is just a data structure update. The allocator and solver still
use the graph the same way as before, fully reconstructing it between each
round. I expect no material change from this update, although it may change
the iteration order of the nodes, causing ties in the solver to break in
different directions, and this could perturb the generated allocations
(hopefully in a completely benign way).
Thanks very much to Arnaud Allard de Grandmaison for encouraging me to get back
to work on this, and for a lot of discussion and many useful PBQP test cases.
llvm-svn: 194300
The idea of the AnyReg Calling Convention is to provide the call arguments in
registers, but not to force them to be placed in a paticular order into a
specified set of registers. Instead it is up tp the register allocator to assign
any register as it sees fit. The same applies to the return value (if
applicable).
Differential Revision: http://llvm-reviews.chandlerc.com/D2009
Reviewed by Andy
llvm-svn: 194293
On darwin, when trying to create compact unwind info, a .cfi_cfa_def
directive would case an llvm_unreachable() to be hit. Back off when we
see this directive and generate the regular DWARF style eh_frame.
rdar://15406518
llvm-svn: 194285
LoopUnswitch's code simplification routine has logic to convert conditional
branches into unconditional branches, after unswitching makes the condition
constant, and then remove any blocks that renders dead. Unfortunately, this
code is dead, currently broken, and furthermore, has never been alive (at least
as far back at 2006).
No functionality change intended.
llvm-svn: 194277
Based on discussions with Lang Hames and Jakob Stoklund Olesen at the hacker's lab, and in the light of upcoming work on the PBQP register allocator, it was though that CalcSpillWeights does not need to be a pass. This change will enable to customize / tune the spill weight computation depending on the allocator.
Update the documentation style while there.
No functionnal change.
llvm-svn: 194269
ARM prologues usually look like:
push {r7, lr}
sub sp, sp, #4
If code size is extremely important, this can be optimised to the single
instruction:
push {r6, r7, lr}
where we don't actually care about the contents of r6, but pushing it subtracts
4 from sp as a side effect.
This should implement such a conversion, predicated on the "minsize" function
attribute (-Oz) since I've yet to find any code it actually makes faster.
llvm-svn: 194264
Linux cannot open directories with open(2), although cygwin and *bsd can.
Motivation: The test, Object/directory.ll, had been failing with --target=cygwin on Linux. XFAIL was improper for host issues.
llvm-svn: 194257
Summary:
Consider a GEP of:
i8* getelementptr ({ [2 x i8], i32, i8, [3 x i8] }* @main.c, i32 0, i32 0, i64 0)
If we proceeded to GEP the aforementioned object by 8, would form a GEP of:
i8* getelementptr ({ [2 x i8], i32, i8, [3 x i8] }* @main.c, i32 0, i32 0, i64 8)
Note that we would go through the first array member, causing an
out-of-bounds accesses. This is problematic because we might get fooled
if we are trying to evaluate loads using this GEP, for example, based
off of an object with a constant initializer where the array is zero.
This fixes PR17732.
Reviewers: nicholas, chandlerc, void
Reviewed By: void
CC: llvm-commits, echristo, void, aemerson
Differential Revision: http://llvm-reviews.chandlerc.com/D2093
llvm-svn: 194220
The BlockAddress doesn't have access to the correct basic blocks until the
functions have been cloned. This causes the BlockAddress to point to the old
values. Just wait until the functions have been cloned before copying the
initializers.
PR13163
llvm-svn: 194218
of being converted and this path is not relevant to anything at this time
so I have just disabled it for a few days while I'm at the LLVM conference
and don't have time to complete it or properly fix it.
llvm-svn: 194201
after the 3.4 release to the release notes. See the *lengthy* llvmdev
and cfe-dev threads on this subject. There will be more emails,
discussion and announcements, but I want to make noise in as many places
as I can to get everyone's concerns voiced and understood.
llvm-svn: 194183
Patch by Michele Scandale!
Rewrite of the functions used to compute the backedge taken count of a
loop on LT and GT comparisons.
I decided to split the handling of LT and GT cases becasue the trick
"a > b == -a < -b" in some cases prevents the trip count computation
due to the multiplication by -1 on the two operands of the
comparison. This issue comes from the conservative computation of
value range of SCEVs: taking the negative SCEV of an expression that
have a small positive range (e.g. [0,31]), we would have a SCEV with a
fullset as value range.
Indeed, in the new rewritten function I tried to better handle the
maximum backedge taken count computation when MAX/MIN expression are
used to handle the cases where no entry guard is found.
Some test have been modified in order to check the new value correctly
(I manually check them and reasoning on possible overflow the new
values seem correct).
I finally added a new test case related to the multiplication by -1
issue on GT comparisons.
llvm-svn: 194116
One of the uses of the IsValid flag is to support default constructing
a ErrorOr that is not a Error or a Value. There is not much value in
doing that IMHO. If ErrorOr was to have a default constructor, it
should be implemented by default constructing the value, but even that
looks unnecessary.
The other use is to avoid calling destructors on moved objects. This
looks wrong. If the data being moved has non trivial treatment of
moves (an std::vector for example), it is its destructor that should
handle it, not ~ErrorOr.
With this change ErrorOr becomes a fairly simple wrapper and should
always be better than using an error_code + value in an API.
llvm-svn: 194109
MorphNodeTo is not safe to call during DAG building. It eagerly
deletes dependent DAG nodes which invalidates the NodeMap. We could
expose a safe interface for morphing nodes, but I don't think it's
worth it. Just create a new MachineNode and replaceAllUsesWith.
My understaning of the SD design has been that we want to support
early target opcode selection. That isn't very well supported, but
generally works. It seems reasonable to rely on this feature even if
it isn't widely used.
llvm-svn: 194102
we don't have such an operand.
Suprisingly enough, this is never actually accounted for in the
ARM version when determining offset ranges. In both places there is the
comment:
- // FIXME: Make use full range of soimm values.
(soimm = shift operand immediate).
llvm-svn: 194101
Cortex-M0 supports these 32-bit instructions despite being Thumb1 only
(mostly). We knew about that but not that the aliases without the default "sy"
operand were also permitted.
llvm-svn: 194094
Due to the previously added overflow checks, we can have a retain/release
relation that is one directional. This occurs specifically when we run into an
additive overflow causing us to drop state in only one direction. If that
occurs, we should bail and not optimize that retain/release instead of
asserting.
Apologies for the size of the testcase. It is necessary to cause the additive
cfg overflow to trigger.
rdar://15377890
llvm-svn: 194083
Submit the basic port of the rest of ARM constant islands code to Mips.
Two test cases are added which reflect the next level of functionality:
constants getting moved to water areas that are out of range from the
initial placement at the end of the function and basic blocks being split to
create water when none exists that can be used. There is a bunch of this
code that is not complete and has been marked with IN_PROGRESS. I will
finish cleaning this all up during the next week or two and submit the
rest of the test cases. I have elminated some code for dealing with
inline assembly because to me it unecessarily complicates things and
some of the newer features of llvm like function attributies and builtin
assembler give me better tools to solve the alignment issues created
there. Also, for Mips16 I even have the option of not doing constant
islands in the present of inline assembler if I chose. When everything
has been completed I will summarize the port and notify people that
are knowledgable regarding the ARM Constant Islands code so they can
review it in it's entirety if they wish.
llvm-svn: 194053
This patch enables llvm-cov to correctly output the run count stored in
the GCDA file. GCOVProfiling currently does not generate this
information, so the GCDA run data had to be hacked on from a GCDA file
generated by gcc. This is corrected by a subsequent patch.
With the run and program data included, both llvm-cov and gcov produced
the same output.
llvm-svn: 194033
ErrorOr had quiet a bit of complexity and indirection to be able to hold a user
type with the error.
That feature is not used anymore. This patch removes it, it will live in svn
history if we ever need it again.
If we do need it again, IMHO there is one thing that should be done
differently: Holding extra info in the error is not a property a function also
returning a value or not. The ability to hold extra info should be in the error
type and ErrorOr templated over it so that we don't need the funny looking
ErrorOr<void>.
llvm-svn: 194030
As with the other loop unrolling parameters (the unrolling threshold, partial
unrolling, etc.) runtime unrolling can now also be controlled via the
constructor. This will be necessary for moving non-trivial unrolling late in
the pass manager (after loop vectorization).
No functionality change intended.
llvm-svn: 194027
ResolveFrameIndex had what appeared to be a very nasty hack for when the
frame-index referred to a callee-saved register. In this case it "adjusted" the
offset so that the address was correct if (and only if) the MachineInstr
immediately followed the respective push.
This "worked" for all forms of GPR & DPR but was only ever used to set the
frame pointer itself, and once this was put in a more sensible location the
entire state-tracking machinery it relied on became redundant. So I stripped
it.
The only wrinkle is that "add r7, sp, #0" might theoretically be slower (need
an actual ALU slot) compared to "mov r7, sp" so I added a micro-optimisation
that also makes emitARMRegUpdate and emitT2RegUpdate also work when NumBytes ==
0.
No test changes since there shouldn't be any functionality change.
llvm-svn: 194025
If an inline assembly operand has multiple constraints (e.g. "Ir" for immediate
or register) and an operand modifier (E.g. "w" for "print register as wN") then
we need to decide behaviour when the modifier doesn't apply to the constraint.
Previousely produced some combination of an assertion failure and a fatal
error. GCC's behaviour appears to be to ignore the modifier and print the
operand in the default way. This patch should implement that.
llvm-svn: 194024
Two test cases are added which reflect the next level of functionality:
constants getting moved to water areas that are out of range from the
initial placement at the end of the function and basic blocks being split to
create water when none exists that can be used. There is a bunch of this
code that is not complete and has been marked with IN_PROGRESS. I will
finish cleaning this all up during the next week or two and submit the
rest of the test cases. I have elminated some code for dealing with
inline assembly because to me it unecessarily complicates things and
some of the newer features of llvm like function attributies and builtin
assembler give me better tools to solve the alignment issues created
there. Also, for Mips16 I even have the option of not doing constant
islands in the present of inline assembler if I chose.
llvm-svn: 194019
When the elements are extracted from a select on vectors
or a vector select, do the select on the extracted scalars
from the input if there is only one use.
llvm-svn: 194013
In order to create an ObjectFile implementation that uses bitcode files, we
need to propagate the bitcode errors to the ObjectFile interface, so we need
to convert it to use the same error handling as ObjectFile: error_code.
llvm-svn: 193996
stack traces by default if you use PrettyStackTraceProgram, so that existing LLVM-based
tools will continue to get it without any changes.
llvm-svn: 193971
Instead of doing a RPO traversal of the whole function remember the blocks
containing gathers (typically <= 2) and scan them in dominator-first order.
The actual CSE is still quadratic, but I'm not confident that adding a
scoped hash table here is worth it as we're only looking at the generated
instructions and not arbitrary code.
llvm-svn: 193956
This adds an SimplifyLibCalls case which converts the special __sinpi and
__cospi (float & double variants) into a __sincospi_stret where appropriate to
remove duplicated work.
Patch by Tim Northover
llvm-svn: 193943
Doing this with a hash map doesn't change behavior and avoids calling
isIdenticalTo O(n^2) times. This should probably eventually move into a utility
class shared with EarlyCSE and the limited CSE in the SLPVectorizer.
llvm-svn: 193926
Nick Lewycky