This adds an alias for llvm-symbolizer with different defaults so that
it can be used as a drop-in replacement for GNU's addr2line.
If a substring "addr2line" is found in the tool's name:
* it defaults "-i", "-f" and "-C" to OFF;
* it uses "--output-style=GNU" by default.
Differential Revision: https://reviews.llvm.org/D60067
llvm-svn: 358749
This patch addresses two differences in the output of llvm-symbolizer
and GNU's addr2line:
* llvm-symbolizer prints an empty line after the report for an address.
* With "-f -i=0", llvm-symbolizer replaces the name of an inlined
function with the name from the symbol table, i. e., the top caller
function in the inlining chain. addr2line preserves the name of the
inlined function.
Differential Revision: https://reviews.llvm.org/D60770
llvm-svn: 358747
addr2line allows -e to be grouped with other options; it also allows it
to prefix the value. Thus, all the following usages are possible:
* addr2line -f -e <bin> <addr>
* addr2line -fe <bin> <addr>
* addr2line -f e<bin> <addr>
* addr2line -fe<bin> <addr>
This patch adds the same for llvm-symbolizer.
Differential Revision: https://reviews.llvm.org/D60196
llvm-svn: 357676
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: eugenis, vitalybuka, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 356265
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: ormris, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 355972
Summary:
llvm-symbolizer would originally report symbols that belonged to an invalid object file section.
Specifically the case where: `*Symbol.getSection() == ObjFile.section_end()`
This patch prevents the Symbolizer from collecting symbols that belong to invalid sections.
The test (from PR40591) introduces a case where two symbols have address 0,
one symbol is defined, 'foo', and the other is not defined, 'bar'. This patch will cause
the Symbolizer to keep 'foo' and ignore 'bar'.
As a side note, the logic for adding symbols to the Symbolizer's store
(`SymbolizableObjectFile::addSymbol`) replaces symbols with the
same <address, size> pair. At some point that logic should be revisited as in the
aforementioned case, 'bar' was overwriting 'foo' in the Symbolizer's store,
and 'foo' was forgotten.
This fixes PR40591
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58146
llvm-svn: 354083
This patch adds half a dozen new tests that test various edge cases in
the behaviour of the symbolizer and DWARF data parsing. All of them test
the current behaviour.
Reviewed by: JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D57741
llvm-svn: 353286
This is the fourth (and final for now) of a series of patches
simplifying llvm-symbolizer tests. See r352752, r352753 and 352754 for
the previous ones. This patch splits out several more distinct test
cases from llvm-symbolizer.test into separate tests, and simplifies them
in various ways including:
1) Building a test case for spaces in path from source, rather than
using a pre-canned binary. This allows deleting of said binary and the
source it was built from.
2) Switching to specifying addresses and objects directly on the
command-line rather than via stdin.
This also adds an explict test for the ability to specify a file and
address as a line in stdin, since the majority of the tests have been
migrated away from this approach, leaving this largely untested.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352756
This is the third of a series of patches simplifying llvm-symbolizer
tests. See r352752 and r352753 for the previous two. This patch splits
out a number of distinct test cases from llvm-symbolizer.test into
separate tests, and simplifies them in various ways including:
1) using --obj/positional arguments for the input file and addresses
instead of stdin,
2) using runtime-generated inputs rather than a pre-canned binary, and
3) testing more specifically (i.e. checking only what is interesting to
the behaviour changed in the original commit for that test case).
This patch also removes the test case for using --obj. The
tools/llvm-symbolizer/basic.s test already tests this case. Finally,
this patch adds a simple test case to the demangle switch test case to
show that demangling happens by default.
See https://bugs.llvm.org/show_bug.cgi?id=40070#c1 for the motivation.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352754
This change migrates most llvm-symbolizer tests away from reading input
via stdin and instead using --obj + positional arguments for the file
and addresses respectively, which makes the tests easier to read.
One exception is the test test/tools/llvm-symbolizer/pdb/pdb.test, which
was doing some manipulation on the input addresses. This patch
simplifies this somewhat, but it still reads from stdin.
More changes to follow to simplify/break-up other tests.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57441
llvm-svn: 352752
If a stack trace or similar has a list of addresses from an executable
or DSO loaded at a variable address (e.g. due to ASLR), the addresses
will not directly correspond to the addresses stored in the object file.
If a user wishes to use llvm-symbolizer, they have to subtract the load
address from every address. This is somewhat inconvenient, especially as
the output of --print-address will result in the adjusted address being
listed, rather than the address coming from the stack trace, making it
harder to map results between the two.
This change adds a new switch to llvm-symbolizer --adjust-vma which
takes an offset, which is then used to automatically do this
calculation. The printed address remains the input address (allowing for
easy mapping), whilst the specified offset is applied to the addresses
when performing the lookup.
The switch is conceptually similar to llvm-objdump's new switch of the
same name (see D57051), which in turn mirrors a GNU switch. There is no
equivalent switch in addr2line.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57151
llvm-svn: 352195
Pulling out the split-dwarf tests by way of example of how I think
llvm-symbolizer should be tested going forward. Open to
debate/discussion, though.
llvm-svn: 352004
This change adds two options, -i and -inlines as aliases for the -inlining option to llvm-symbolizer to improve compatibility with the GNU addr2line utility which accepts these options.
It also modifies existing tests that use -inlining to exercise these new aliases as well.
This fixes PR40073.
Reviewed by: jhenderson, Quolyk, ruiu
Differential Revision: https://reviews.llvm.org/D57083
llvm-svn: 351999
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
Summary:
The issue with the python path is that the path to python on Windows can contain spaces. To make the tests always work, the path to python needs to be surrounded by quotes.
This change updates several configuration files which specify the path to python as a substitution and also remove quotes from existing tests.
Reviewers: asmith, zturner, alexshap, jakehehrlich
Reviewed By: zturner, alexshap, jakehehrlich
Subscribers: mehdi_amini, nemanjai, eraman, kbarton, jakehehrlich, steven_wu, dexonsmith, stella.stamenova, delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D50206
llvm-svn: 339073
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
We use llvm-symbolizer in some production systems, and we run it
against all possibly related files, including some that are not
ELF. We noticed that for some of those invalid files, llvm-symbolizer
would crash with SEGFAULT. Here is an example of such a file.
It is due to that in computeSymbolSizes, a loop uses condition
for (unsigned I = 0, N = Addresses.size() - 1; I < N; ++I) {
where if Addresses.size() is 0, N would overflow and causing the loop
to access invalid memory.
Instead of patching the loop conditions, the commit makes so that the
function returns early if Addresses is empty.
Validated by checking that llvm-symbolizer no longer crashes.
Patch by Teng Qin!
Differential Revision: https://reviews.llvm.org/D44285
llvm-svn: 330610
Summary:
The symbolizer was checking for .debug as a subdirectory of the
binary file itself, not of the directory containing the binary. This led to
a failure to find split debug info when it was contained in a .debug directory.
Reviewers: rnk, glider, zturner
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D44025
llvm-svn: 326630
This was a bug in the test that was only exposed as a result of
refactoring some code in lit configuration files. Previously,
llvm's lit configuration would only set the target-windows feature
if the system was also windows. Since cross-compilation is
a thing, this isn't correct. target-windows should be set
independently of system-windows.
Adding to that bug, this particular test then checked for
target-windows when it really meant "can I call a certain API on
the host machine", which is what system-windows is for.
Ultimately, this test only works if *both* the target and host
are Windows, so I've updated the test to reflect that.
llvm-svn: 313468
Summary:
In the current implementation, to find inline stack for an address incurs expensive linear search in 2 places:
* linear search for the top-level DIE
* recursive linear traverse the DIE tree to find the path to the leaf DIE
In this patch, a map is built from address to its corresponding leaf DIE. The inline stack is built by traversing from the leaf DIE up to the root DIE. This speeds up batch symbolization by ~10X without noticible memory overhead.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32177
llvm-svn: 300742
DWARF info contains info about the line number at which a function starts (DW_AT_decl_line).
This patch creates a function to look up the start line number for a function, and returns it in
DILineInfo when looking up debug info for a particular address.
Patch by Simon Que!
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D27962
llvm-svn: 294231
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
llvm-svn: 290001
Turns out if you were on windows and your default target wasn't windows the system-windows feature wasn't getting enabled.
This fixes that and updates the coff-dwarf test to rely on the new "target-windows" feature. That test was the reason why system-windows was changed to not always be enabled on Windows hosts.
llvm-svn: 289503
Summary:
Previously we would try to load PDBs for every PE executable we tried to
symbolize. If that failed, we would fall back to DWARF. If there wasn't
any DWARF, we'd print mostly useless symbol information using the export
table.
With this change, we only try to load PDBs for executables that claim to
have them. If that fails, we can now print an error rather than falling
back silently. This should make it a lot easier to diagnose and fix
common symbolization issues, such as not having DIA or not having a PDB.
Reviewers: zturner, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20982
llvm-svn: 271725
Summary:
llvm-symbolizer wants to get linkage names of functions for historical
reasons. Linkage names are only recorded in the PDB for public symbols,
and the linkage name is apparently stored separately in some "public
symbol" record. We had a workaround in PDBContext which would look for
such symbols when the user requested linkage names.
However, when given an address that was truly in a private function and
public funciton, we would accidentally find nearby public symbols and
return those function names. The fix is to look for both function
symbols and public symbols and only prefer the public symbol name if the
addresses of the symbols agree.
Fixes PR27492
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19571
llvm-svn: 267732
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
Fangrui Song