The OperationFolder currently just inserts into the entry block of a Function, but regions may be isolated above, i.e. explicit capture only, and blindly inserting constants may break the invariants of these regions.
PiperOrigin-RevId: 254987796
GPU dialect operations (launch and launch_func) use `index` type for thread and
block index values inside the kernel, for compatibility with affine loops.
NVVM dialect operations, following the NVVM intrinsics, use `!llvm.i32` type,
which does not necessarily have the same bit width as the lowered `index` type.
Optionally sign-extend (indices are signed) or truncate the result of the NVVM
dialect operation to the bit width of the lowered `index` type before passing
it to other operations. This behavior is consistent with `std.index_cast`. We
cannot use the latter since we are targeting LLVM dialect types directly,
rather than standard integer types.
PiperOrigin-RevId: 254980868
PTX backend in LLVM expects additional module-level metadata
`!nvvm.annotations` that lists functions that can be used as GPU kernels.
Generate this metadata based on the `gpu.kernel` attribute attached to
functions. This attribute is added automatically by the kernel outlining pass
in the GPU dialect lowering flow.
PiperOrigin-RevId: 254957345
The error would look like:
path/filename.mlir:32:23: error: use of value '%28' expects different type than prior uses: ''i32'' vs ''!_tf.control''
PiperOrigin-RevId: 254874859
This CL makes use of view_slice in tiling and fusion.
Using a higher level IR element greatly simplifies the IR produced during tiling and fusion.
Lowering to LLVM is updated to first translate view_slice into a sequence of dim, range and cmpi.
This level will also be useful when lowering to affine.
PiperOrigin-RevId: 254767814
Enable reusing the real mlir-opt main from unit tests and in case where
additional initialization needs to happen before main is invoked (e.g., when
using different command line flag libraries).
PiperOrigin-RevId: 254764575
The new operations affine.load and affine.store will take composed affine maps by construction.
These operations will eventually replace load and store operations currently used in affine regions and operated on by affine transformation and analysis passes.
PiperOrigin-RevId: 254754048
The ModuleOp contains a single region that must contain a single block. This block must be terminated by a new pseudo operation 'module_terminator'. The syntax for this operations is as follows:
`module` (`attributes` attr-dict)? region
Example:
module {
...
}
module attributes { ... } {
...
}
PiperOrigin-RevId: 254513752
This CL adds a conv op that corresponds to the TF description along with its lowering to loops (https://www.tensorflow.org/api_docs/python/tf/nn/convolution).
The dimension of the convolution is inferred from the rank of the views. The other logical
dimensions correspond to the TF description.
The computation of tiled views need to be updated to work for the input tensor. This is left for a future CL.
PiperOrigin-RevId: 254505644
This will allow for locations to be used in the same contexts as attributes. Given that attributes are nullable types, the 'Location' class now represents a non-nullable wrapper around a 'LocationAttr'. This preserves the desired semantics we have for non-optional locations.
PiperOrigin-RevId: 254505278
This CL adds the basic SPIR-V serializer and deserializer for converting
SPIR-V module into the binary format and back. Right now only an empty
module with addressing model and memory model is supported; (de)serialize
other components will be added gradually with subsequent CLs.
The purpose of this library is to enable importing SPIR-V binary modules
to run transformations on them and exporting SPIR-V modules to be consumed
by execution environments. The focus is transformations, which inevitably
means changes to the binary module; so it is not designed to be a general
tool for investigating the SPIR-V binary module and does not guarantee
roundtrip equivalence (at least for now).
PiperOrigin-RevId: 254473019
This CL adds support for O-D ops in Linalg ops by:
1. making the CopyOp maps optional instead of default valued
2. allowing certain map operations to accept and return empty maps
3. making linalg::LowerToLoops aware of these changes
4. providing a proper 0-D impl for CopyOp and FillOp
5. adding the relevant tests
PiperOrigin-RevId: 254381908
https://www.khronos.org/registry/spir-v/specs/1.0/SPIRV.html#OpTypeImage.
Add new enums to describe Image dimensionality, Image Depth, Arrayed
information, Sampling, Sampler User information, and Image format.
Doesn's support the Optional Access qualifier at this stage
Fix Enum generator for tblgen to add "_" at the beginning if the enum
starts with a number.
PiperOrigin-RevId: 254091423
* Support for 1->0 type mappings, i.e. when the argument is being removed.
* Reordering types when converting a type signature.
* Adding new inputs when converting a type signature.
This cl also lays down the initial foundation for supporting 1->N type mappings, but full support will come in a followup.
Moving forward, function signature changes will be driven by populating a SignatureConversion instance. This class contains all of the necessary information for adding/removing/remapping function signatures; e.g. addInputs, addResults, remapInputs, etc.
PiperOrigin-RevId: 254064665
These were likely added in error because of confusion about the flag when it was just called "-verify". The extra flag doesn't cause much harm, but it does make mlir-opt do more work and clutter the RUN line
PiperOrigin-RevId: 254037016
This name has caused some confusion because it suggests that it's running op verification (and that this verification isn't getting run by default).
PiperOrigin-RevId: 254035268
By default MSVC does not export any symbol and does not create a companion
.lib for a .dll. This will cause problems when trying to link against the
library.
PiperOrigin-RevId: 254033454
This is a direct modelling of SPIR-V's OpVariable. The custom assembly format
parsers/prints descriptor in a nicer way if presents. There are other common
decorations that can appear on variables like builtin, which can be supported
later.
This CL additionally deduplicates the parser/printer/verifier declaration
in op definitions by adding defaults to SPV_Op base.
by adding
PiperOrigin-RevId: 253828254
Index types integers of platform-specific bit width. They are used to index
memrefs and as loop induction variables, however they could not be obtained
from an integer until now, making it virtually impossible to express indirect
accesses (given that memrefs of indices are not allowed) or data-dependent
loops. Introduce `std.index_cast` to transform indices into integers and vice
versa. The semantics of this cast is to sign-extend when casting to a wider
integer, and to truncate when casting to a narrower integer. It belongs to
StandardOps because both types it operates on are standard types, and because
its results are likely to be used in std.load and std.store.
Introduce llvm.sext, llvm.zext and llvm.trunc operations to the LLVM dialect.
Provide the conversion of `std.index_cast` to llvm.sext or llvm.trunc,
depending on the actual bitwidth of `index` known during the conversion.
PiperOrigin-RevId: 253624100
This CL adds a generic CopyOp to Linalg and its lowering to loops.
The CopyOp supports input and output permutation maps.
When combined with tiling and allocating a new local buffer, this should provide basic support for implementing simple memory transfers with coalescing.
At the moment, lowering copies to a library call is not supported.
PiperOrigin-RevId: 253250497
This converts entire loops into threads/blocks. No check on the size of the
block or grid, or on the validity of parallelization is performed, it is under
the responsibility of the caller to strip-mine the loops and to perform the
dependence analysis before calling the conversion.
PiperOrigin-RevId: 253189268
`affine.apply` is supposed to operate on values of index types in context of
affine loops. It is possible to programmatically constuct an `affine.apply`
that takes values of other types as operands or returns them, but it would not
be parseable. Disallow such cases in the verifier.
PiperOrigin-RevId: 253021704
This terminator operation should appear at the end of the blocks in the body
region of `gpu.launch` when the control flow needs to be returned from the
kernel. Using `std.return` in this place is ambiguous: it may exit the body
region or the enclosing function. Furthermore, this allows the GPU dialect to
impose the absence of return values as required by the underlying kernel
execution models.
Update outlining transformation from `gpu.launch` to `gpu.launch_func` so that
it replaces `gpu.return` with `std.return`.
PiperOrigin-RevId: 252985992
Pointer types need to specify the storage class. We use the utility functions
generated from SPV_StorageClassAttr to parse and print the storage classes.
Also improved the case that no element type is provided for (runtime) array.
PiperOrigin-RevId: 252935599
This CL adds a generic FillOp to Linalg and its lowering to loops.
This is achieved by avoiding to specify the static NLoopTypes and ViewRanks type traits but instead defines the relevant methods as `extraClassDeclaration`.
The relevant AffineMap and scalar emission code are added, with relevant tests.
This gives us a first rank-agnostic Linalg op with its generic lowering to loops that should compose with view-based tiling and fusion.
PiperOrigin-RevId: 252869205
1) Lowest minimum pattern stack depth when legalizing.
- This leads the system to favor patterns that have lower legalization stacks, i.e. represent a more direct mapping to the target.
2) Pattern benefit.
- When considering multiple patterns with the same legalization depth, this favors patterns with a larger specified benefit.
PiperOrigin-RevId: 252713470
This CL adds a fusion pass for the Linalg dialect.
Fusion is backed by a simple analysis on SSA values and proceeds as follows:
1. A dependence and alias analyses are performed on views.
2. A Linalg op is tiled by a particular tile size. This creates a new Linalg op operating on tiled loops and tiled views.
3. The dependence analysis is used to obtain ops that produce views that are consumed by the original Linalg op.
4. Dependence analysis is used to determine whether op-level fusion would violate any dependence.
5. If fusion is safe, matching tiled views are sliced for the producing op.
6. A tiled clone of the producer op is written before the tiled consumer op.
If a producer is fused, its entire output view has been computed in tiled form.
The original producer op is then erased.
PiperOrigin-RevId: 252695194
This CL adds a lowering to LLVM for MamulOp and a corresponding integration test.
View descriptor manipulation is moved from MLIR's LLVM dialect to C++ code compiled on the side. To this end a separation is introduced between `cblas.cpp` and `cblas_interface.cpp`, the latter operating on view types whose ABI correspond to the LLVM signature generated by MLIR.
An intermediary step is introduced that allocates a new descriptor on the MLIR side for the purpose of passing it to LLVM. The reason for this extra step is that the ABI for by-value ViewType objects wants aligned descriptors, e.g.:
```
extern "C" void linalg_dot_impl(ViewType<float, 1> X, ViewType<float, 1> Y,
BaseViewType<float> Z) {
...
}
```
produces LLVM IR with the signature:
```
%struct.ViewType = type { %struct.BaseViewType, [1 x i64], [1 x i64] }
%struct.BaseViewType = type { float*, i64 }
define void @linalg_dot_impl(%struct.ViewType* byval align 8, %struct.ViewType* byval align 8, float*, i64) tensorflow/mlir#0 {
...
}
```
We don't seem to be able to make such aligned allocations in the MLIR -> LLVM converter atm.
Going through a level of indirection allows the test to pass.
The temporary tradeoff is that the MLIR shims have to be written by hand.
They will disappear in the future.
PiperOrigin-RevId: 252670672
Andy Davis