This code previously existed only in MCMachOStreamer but is
useful for WebAssembly too. See: D46335
Differential Revision: https://reviews.llvm.org/D46297
llvm-svn: 331412
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
If no data or instructions are emitted after a location directive, we
should clear the cv_loc when we change sections, or it will be emitted
at the beginning of the next section. This violates our invariant that
all .cv_loc directives belong to the same section. Add clearer
assertions for this.
llvm-svn: 330884
Rely on the assembler to finalize the layout of the DWARF/Itanium
exception-handling LSDA. Rather than calculate the exact size of each
thing in the LSDA, use assembler directives:
To emit the offset to the TTBase label:
.uleb128 .Lttbase0-.Lttbaseref0
.Lttbaseref0:
To emit the size of the call site table:
.uleb128 .Lcst_end0-.Lcst_begin0
.Lcst_begin0:
... call site table entries ...
.Lcst_end0:
To align the type info table:
... action table ...
.balign 4
.long _ZTIi
.long _ZTIl
.Lttbase0:
Using assembler directives simplifies the compiler and allows switching
the encoding of offsets in the call site table from udata4 to uleb128 for
a large code size savings. (This commit does not change the encoding.)
The combination of the uleb128 followed by a balign creates an unfortunate
dependency cycle that the assembler must sometimes resolve either by
padding an LEB or by inserting zero padding before the type table. See
PR35809 or GNU as bug 4029.
Patch by Ryan Prichard!
llvm-svn: 324749
Infrastructure designed for padding code with nop instructions in key places such that preformance improvement will be achieved.
The infrastructure is implemented such that the padding is done in the Assembler after the layout is done and all IPs and alignments are known.
This patch by itself in a NFC. Future patches will make use of this infrastructure to implement required policies for code padding.
Reviewers:
aaboud
zvi
craig.topper
gadi.haber
Differential revision: https://reviews.llvm.org/D34393
Change-Id: I92110d0c0a757080a8405636914a93ef6f8ad00e
llvm-svn: 316413
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
We were previously silently emitting bogus data in release mode,
making it very hard to diagnose the error, or crashing with an
assert in debug mode. A proper diagnostic is now always emitted
when the value to be emitted is out of range.
llvm-svn: 303041
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
llvm-svn: 289643
Summary:
Previously we were trying to represent this with the "contains" list of
the .cv_inline_linetable directive, which was not enough information.
Now we directly represent the chain of inlined call sites, so we know
what location to emit when we encounter a .cv_loc directive of an inner
inlined call site while emitting the line table of an outer function or
inlined call site. Fixes PR29146.
Also fixes PR29147, where we would crash when .cv_loc directives crossed
sections. Now we write down the section of the first .cv_loc directive,
and emit an error if any other .cv_loc directive for that function is in
a different section.
Also fixes issues with discontiguous inlined source locations, like in
this example:
volatile int unlikely_cond = 0;
extern void __declspec(noreturn) abort();
__forceinline void f() {
if (!unlikely_cond) abort();
}
int main() {
unlikely_cond = 0;
f();
unlikely_cond = 0;
}
Previously our tables gave bad location information for the 'abort'
call, and the debugger wouldn't snow the inlined stack frame for 'f'.
It is important to emit good line tables for this code pattern, because
it comes up whenever an asan bug occurs in an inlined function. The
__asan_report* stubs are generally placed after the normal function
epilogue, leading to discontiguous regions of inlined code.
Reviewers: majnemer, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24014
llvm-svn: 280822
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
Assembler directives .dtprelword, .dtpreldword, .tprelword, and
.tpreldword generates relocations R_MIPS_TLS_DTPREL32, R_MIPS_TLS_DTPREL64,
R_MIPS_TLS_TPREL32, and R_MIPS_TLS_TPREL64 respectively.
The main motivation for this patch is to be able to write test cases
for checking correctness of the LLD linker's behaviour.
Differential Revision: https://reviews.llvm.org/D23669
llvm-svn: 279439
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20752
llvm-svn: 271102
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20656
llvm-svn: 271028
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20337
llvm-svn: 270786
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
llvm-svn: 259868
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
llvm-svn: 259230
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
Sam Clegg