Summary:
[libFuzzer] Enable afl_driver to append stderr to a user specified file.
Append stderr of afl_driver to the file specified by the environmental variable
AFL_DRIVER_STDERR_DUPLICATE_FILENAME if it is set. This lets users see outputs
on crashes without rerunning crashing test cases (which won't work for crashes
that are difficult to reproduce). Before this patch, stderr would only be sent to afl-fuzz
and users would have no way of seeing it.
Reviewers: llvm-commits, aizatsky, kcc, vitalybuka
Subscribers: vitalybuka
Differential Revision: http://reviews.llvm.org/D21194
llvm-svn: 272706
Summary:
We now use a standard fixup type applying the pc-relative address of
constant address space variables, and we have the GlobalAddress lowering
code add the required 4 byte offset to the global address rather than
doing it as part of the fixup.
This refactoring will make it easier to use the same code for global
address space variables and also simplifies the code.
Re-commit this after fixing a bug where we were trying to use a
reference to a Triple object that had already been destroyed.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21154
llvm-svn: 272705
This change teaches llvm::isGuaranteedToTransferExecutionToSuccessor
that calls to @llvm.assume always terminate. Most other relevant
intrinsics should be covered by the "CS.onlyReadsMemory() ||
CS.onlyAccessesArgMemory()" bit but we were missing @llvm.assumes
because we state that it clobbers memory.
Added an LICM test case, but this change is not specific to LICM.
llvm-svn: 272703
Summary:
Split NumInstrDups statistic into separate added/removed counts to avoid
negative stat being printed as unsigned.
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21335
llvm-svn: 272700
On OSX this test sometimes fails due to the
``LLVMFuzzer-FullCoverageSetTest-TracePC`` program going over the
default 2GiB memory limit. This shouldn't be happening and needs
investigating. For now just disable the test so we can set up an
OSX buildbot.
Differential Revision: http://reviews.llvm.org/D21319
llvm-svn: 272696
For <N x i32> type mul, pmuludq will be used for targets without SSE41, which
often introduces many extra pack and unpack instructions in vectorized loop
body because pmuludq generates <N/2 x i64> type value. However when the operands
of <N x i32> mul are extended from smaller size values like i8 and i16, the type
of mul may be shrunk to use pmullw + pmulhw/pmulhuw instead of pmuludq, which
generates better code. For targets with SSE41, pmulld is supported so no
shrinking is needed.
Differential Revision: http://reviews.llvm.org/D20931
llvm-svn: 272694
This reverts commit 879139e1c6577b09df52de56a6bab856a19ed185.
This was committed accidentally when I blindly typed git svn
dcommit instead of the command to generate a patch.
llvm-svn: 272693
This patch also includes some refactoring.
Prior to this patch, we tagged all CFLAA attributes as unknown. This is
suboptimal, since it meant that any Value used as an argument would be
considered to alias any other Value that existed.
Now that we have the machinery to tag sets below the set for an
arbitrary value with attributes, it's okay to be less conservative with
arguments. (Specifically, we still tag the set under an argument with
unknown).
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21262
llvm-svn: 272690
This patch refactors CFLAA's graph building code. This makes keeping
track of common state (TargetLibraryInfo, ...) easier.
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21261
llvm-svn: 272688
Summary:
We now use a standard fixup type applying the pc-relative address of
constant address space variables, and we have the GlobalAddress lowering
code add the required 4 byte offset to the global address rather than
doing it as part of the fixup.
This refactoring will make it easier to use the same code for global
address space variables and also simplifies the code.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21154
llvm-svn: 272675
Change EmitGlobalVariable to check final assembler section is in BSS
before using .lcomm/.comm directive. This prevents globals from being
put into .bss erroneously when -data-sections is used.
This fixes PR26570.
Reviewers: echristo, rafael
Subscribers: llvm-commits, mehdi_amini
Differential Revision: http://reviews.llvm.org/D21146
llvm-svn: 272674
The feature allows for conditional assembly etc.
TODO: make those symbols read-only.
Test added.
Differential Revision: http://reviews.llvm.org/D21238
llvm-svn: 272673
We move the loop rotate functions in a separate class to avoid passing multiple
parameters to each function. This cleanup will help with further development of
loop rotation. NFC.
Patch written by Aditya Kumar and Sebastian Pop.
Differential Revision: http://reviews.llvm.org/D21311
llvm-svn: 272672
Summary:
This new alias takes a comma separated list of prefixes which allows
'--check-prefix=A --check-prefix=B --check-prefix=C' to be written as
'--check-prefixes=A,B,C'.
Reviewers: probinson
Subscribers: probinson, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D21293
llvm-svn: 272670
Instead of always using addu to adjust the stack pointer when the
size out is of the range of an addiu instruction, use subu so that
a smaller constant can be generated.
This can give savings of ~3 instructions whenever a function has a
a stack frame whose size is out of range of an addiu instruction.
This change may break some naive stack unwinders.
Partially resolves PR/26291.
Thanks to David Chisnall for reporting the issue.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D21321
llvm-svn: 272666
We can only generate immediates up to #510 with a MOV+ADD, not #511, because there's no such instruction as add #256.
Found by Oliver Stannard and csmith!
llvm-svn: 272665
Summary:
The SimplifyLibCalls part of InstCombine generates calls to those otherwise.
I wonder if at some point we shouldn't just call disableAllFunctions() and
then enable functions on a whitelist basis...
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96495
Reviewers: arsenm, tstellarAMD
Subscribers: llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21282
llvm-svn: 272664
PR27458 highlights that the MIPS backend does not have well formed
MIR for atomic operations (among other errors).
This patch adds expands and corrects the LL/SC descriptions and uses
for MIPS(64).
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D19719
llvm-svn: 272655
This patch implements the N32 case where -mno-shared is in effect. The case
where -mshared is in effect will be added later since doing that now requires
additional changes to how we handle %hi(%neg(%gp_rel(foo))) expressions to
emit the three relocations as three relocations (currently only one of the
three would be emitted) which then requires further changes to our MCFixup
handling.
While we could fix both cases together, fixing the -mno-shared case allows us
to fix the ELFCLASS bug (where N32 incorrectly uses ELFCLASS64 instead of
ELFCLASS32) in a way that allows cpsetup.s to check for a correct output instead
of another incorrect output.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D21131
llvm-svn: 272652
Ensuring that the PHI are all single-operand is not performed in the
second pass added by the previous pass. This removes the assert from
the first pass.
llvm-svn: 272650
We only used to add the edge from the cloned loop to PHIs that
corresponded to values defined by the loop. We need to do this for all
PHIs obviously since we need a PHI operand for each incoming edge.
This includes things like PHIs with a constant value or with values
defined before the original loop (see the testcases).
After the patch the PHIs are added to the exit block in two passes.
In the first pass we ensure there is a single-operand (LCSSA) PHI for
each value defined by the loop.
In the second pass we loop through each (single-operand) PHI and add the
value for the edge from the cloned loop. If the value is defined in the
loop we'll use the cloned instruction from the cloned loop.
Fixes PR28037
llvm-svn: 272649
Itineraries for some pre MIPSR6 and EVA instructions. Some pseudo expanded
instructions are marked as having no scheduling info.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D20418
llvm-svn: 272648
Summary:
The machine verifier reports 'Explicit operand marked as def' when it is
manually specified even though it agrees with the operand info.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21065
llvm-svn: 272646
The exit-on-error flag in the ARM test is necessary in order to avoid an
unreachable in the DAGTypeLegalizer, when trying to expand a physical register.
We can also avoid this situation by introducing a bitcast early on, where the
invalid scalar-to-vector conversion is detected.
We also add a test for PowerPC, which goes through a similar code path in the
SelectionDAGBuilder.
Fixes PR27765.
Differential Revision: http://reviews.llvm.org/D21061
llvm-svn: 272644
What happened here is that in the new PM there is a bunch of new copying
(actually, moving) and so this reads the HasProfileData member in
situations where it used to not be read.
It used to only be read strictly in the "runOnFunction" method and its
callees, where is *is* initialized (even after my patch).
So this ends up being benign as far as functional behavior of the
compiler (since we set HasProfileData in the "runImpl" method before we
ever make decisions based on it).
It's awesome that UBSan caught this. It highlights one more thing to
watch out for when porting passes.
Sanitizer bot log was:
-- Testing: 17049 tests, 32 threads --
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80..
FAIL: LLVM :: Transforms/JumpThreading/thread-loads.ll (15184 of 17049)
******************** TEST 'LLVM :: Transforms/JumpThreading/thread-loads.ll' FAILED ********************
Script:
--
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/./bin/opt < /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Transforms/JumpThreading/thread-loads.ll -jump-threading -S | /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/./bin/FileCheck /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Transforms/JumpThreading/thread-loads.ll
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/./bin/opt < /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Transforms/JumpThreading/thread-loads.ll -passes=jump-threading -S | /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/./bin/FileCheck /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Transforms/JumpThreading/thread-loads.ll
--
Exit Code: 2
Command Output (stderr):
--
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Transforms/Scalar/JumpThreading.h:90:57: runtime error: load of value 136, which is not a valid value for type 'bool'
#0 0x2c33ba1 in llvm::JumpThreadingPass::JumpThreadingPass(llvm::JumpThreadingPass&&) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Transforms/Scalar/JumpThreading.h:90:57
#1 0x2bc88e4 in void llvm::PassManager<llvm::Function>::addPass<llvm::JumpThreadingPass>(llvm::JumpThreadingPass) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/IR/PassManager.h:282:40
#2 0x2bb2682 in llvm::PassBuilder::parseFunctionPassName(llvm::PassManager<llvm::Function>&, llvm::StringRef) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/lib/Passes/PassRegistry.def:133:1
#3 0x2bb4914 in llvm::PassBuilder::parseFunctionPassPipeline(llvm::PassManager<llvm::Function>&, llvm::StringRef&, bool, bool) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/lib/Passes/PassBuilder.cpp:489:12
#4 0x2bb6f81 in llvm::PassBuilder::parsePassPipeline(llvm::PassManager<llvm::Module>&, llvm::StringRef, bool, bool) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/lib/Passes/PassBuilder.cpp:674:10
#5 0x986690 in llvm::runPassPipeline(llvm::StringRef, llvm::LLVMContext&, llvm::Module&, llvm::TargetMachine*, llvm::tool_output_file*, llvm::StringRef, llvm::opt_tool::OutputKind, llvm::opt_tool::VerifierKind, bool, bool) /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/tools/opt/NewPMDriver.cpp:85:8
#6 0x9af25e in main /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/tools/opt/opt.cpp:468:12
#7 0x7fd7e27dbf44 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21f44)
#8 0x960157 in _start (/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/bin/opt+0x960157)
FileCheck error: '-' is empty.
FileCheck command line: /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/./bin/FileCheck /mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Transforms/JumpThreading/thread-loads.ll
--
********************
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90..
Testing Time: 128.90s
********************
Failing Tests (1):
LLVM :: Transforms/JumpThreading/thread-loads.ll
Expected Passes : 16725
Expected Failures : 129
Unsupported Tests : 194
Unexpected Failures: 1
llvm-svn: 272616
The need for all these Lookup* functions is just because of calls to
getAnalysis inside methods (i.e. not at the top level) of the
runOnFunction method. They should be straightforward to clean up when
the old PM is gone.
llvm-svn: 272615
This reverts commit r272603 and adds a fix.
Big thanks to Davide for pointing me at r216244 which gives some insight
into how to fix this VS2013 issue. VS2013 can't synthesize a move
constructor. So the fix here is to add one explicitly to the
JumpThreadingPass class.
llvm-svn: 272607
Zachary Turner