Change removes the excessive comparsion of
the relocation arrays sizes.
This code was dead, because at the higer level,
equalsConstant function contains the following check:
`A->NumRelocations != B->NumRelocations`
where NumRelocations contains the size of the relocations array.
So removed check did the same job twice.
This was found with use of code coverage analysis.
llvm-svn: 335346
While building a Global Offset Table try to fill the primary GOT as much
as possible because the primary GOT can be accessed in the most
effective way. If it is not possible, try to fill the last GOT in the
multi-GOT list, and finally create a new GOT if both attempts failed.
llvm-svn: 335140
Summary: For --wrap foo --wrap foo, bfd/gold wrap the symbol only once but LLD would rotate it twice.
Reviewers: ruiu, espindola
Subscribers: emaste, arichardson, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D48298
llvm-svn: 334991
Summary:
R_X86_64_GOTOFF64: S + A - GOT
R_X86_64_GOTPC{32,64}: GOT + A - P (R_GOTONLY_PC_FROM_END)
R_X86_64_GOTOFF64 should use R_GOTREL_FROM_END so that in conjunction with
R_X86_64_GOTPC{32,64}, the `GOT` term is neutralized. This also matches
the handling of R_386_GOTOFF (S + A - GOT).
Reviewers: ruiu, espindola
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D48095
llvm-svn: 334672
R_X86_64_GOTOFF64 is a relocation type to set to a distance betwween
a symbol and the beginning of the .got section. Previously, we always
created a dynamic relocation for the relocation type even though it
can be resolved at link-time.
Creating a dynamic relocation for R_X86_64_GOTOFF64 caused link failure
for some programs that do have a relocation of the type in a .text
section, as text relocations are prohibited in most configurations.
Differential Revision: https://reviews.llvm.org/D48058
llvm-svn: 334534
Summary:
Previously LLD would not add any dynamic relocations and write a module
index of 1 which is not correct for the shared library case.
This can happen when a thread-local global variable is marked as local with
a version script. With this change I am now able to link all of the FreeBSD
base system for MIPS64 with LLD.
Differential Revision: https://reviews.llvm.org/D48002
llvm-svn: 334483
Patch adds support for most of the dynamic thread pointer based relocations
for local-dynamic tls. The HIGH and HIGHA versions are missing becuase they
are not supported by the llvm integrated assembler yet.
llvm-svn: 334465
In glibc libc.so.6, the multiple versions of sys_errlist share the same Symbol instance. When sys_errlist is copy relocated, we would replace SharedSymbol with Defined in the first iteration of the following loop:
for (SharedSymbol *Sym : getSymbolsAt<ELFT>(SS))
Then in the second iteration, we think the symbol (which has been changed to Defined) is still SharedSymbol and screw up (the address ends up in the `Size` field).
llvm-svn: 334432
Almost all entries inside MIPS GOT are referenced by signed 16-bit
index. Zero entry lies approximately in the middle of the GOT. So the
total number of GOT entries cannot exceed ~16384 for 32-bit architecture
and ~8192 for 64-bit architecture. This limitation makes impossible to
link rather large application like for example LLVM+Clang. There are two
workaround for this problem. The first one is using the -mxgot
compiler's flag. It enables using a 32-bit index to access GOT entries.
But each access requires two assembly instructions two load GOT entry
index to a register. Another workaround is multi-GOT. This patch
implements it.
Here is a brief description of multi-GOT for detailed one see the
following link https://dmz-portal.mips.com/wiki/MIPS_Multi_GOT.
If the sum of local, global and tls entries is less than 64K only single
got is enough. Otherwise, multi-got is created. Series of primary and
multiple secondary GOTs have the following layout:
```
- Primary GOT
Header
Local entries
Global entries
Relocation only entries
TLS entries
- Secondary GOT
Local entries
Global entries
TLS entries
...
```
All GOT entries required by relocations from a single input file
entirely belong to either primary or one of secondary GOTs. To reference
GOT entries each GOT has its own _gp value points to the "middle" of the
GOT. In the code this value loaded to the register which is used for GOT
access.
MIPS 32 function's prologue:
```
lui v0,0x0
0: R_MIPS_HI16 _gp_disp
addiu v0,v0,0
4: R_MIPS_LO16 _gp_disp
```
MIPS 64 function's prologue:
```
lui at,0x0
14: R_MIPS_GPREL16 main
```
Dynamic linker does not know anything about secondary GOTs and cannot
use a regular MIPS mechanism for GOT entries initialization. So we have
to use an approach accepted by other architectures and create dynamic
relocations R_MIPS_REL32 to initialize global entries (and local in case
of PIC code) in secondary GOTs. But ironically MIPS dynamic linker
requires GOT entries and correspondingly ordered dynamic symbol table
entries to deal with dynamic relocations. To handle this problem
relocation-only section in the primary GOT contains entries for all
symbols referenced in global parts of secondary GOTs. Although the sum
of local and normal global entries of the primary got should be less
than 64K, the size of the primary got (including relocation-only entries
can be greater than 64K, because parts of the primary got that overflow
the 64K limit are used only by the dynamic linker at dynamic link-time
and not by 16-bit gp-relative addressing at run-time.
The patch affects common LLD code in the following places:
- Added new hidden -mips-got-size flag. This flag required to set low
maximum size of a single GOT to be able to test the implementation using
small test cases.
- Added InputFile argument to the getRelocTargetVA function. The same
symbol referenced by GOT relocation from different input file might be
allocated in different GOT. So result of relocation depends on the file.
- Added new ctor to the DynamicReloc class. This constructor records
settings of dynamic relocation which used to adjust address of 64kb page
lies inside a specific output section.
With the patch LLD is able to link all LLVM+Clang+LLD applications and
libraries for MIPS 32/64 targets.
Differential revision: https://reviews.llvm.org/D31528
llvm-svn: 334390
The original computation for shared object symbol alignment is wrong when
st_value equals 0. It is very unusual for dso symbols to have st_value equal 0.
But when it happens, it causes obscure run time bugs.
Differential Revision: https://reviews.llvm.org/D47602
llvm-svn: 334135
Previously, "-m is missing" error message is shown if you pass a
nonexistent file or don't pass any file at all to lld, as shown below:
$ ld.lld nonexistent.o
ld.lld: error: cannot open nonexistent.o: No such file or directory
ld.lld: error: target emulation unknown: -m or at least one .o file required
This patch eliminates the second error message because it's not related
and even inaccurate (you passed a .o file though it didn't exist).
llvm-svn: 334024
Currently, when LLD do a lookup for variables location, it uses DW_AT_name attribute.
That is not always enough.
Imagine code:
namespace A {
int bar = 0;
}
namespace Z {
int bar = 1;
}
int hoho;
In this case there are 3 variables and their debug attributes are following:
A::bar has: DW_AT_name [DW_FORM_string] ("bar") DW_AT_linkage_name [DW_FORM_strp] ( .debug_str[0x00000006] = "_ZN1A3barE")
Z::bar has: DW_AT_name [DW_FORM_string] ("bar") DW_AT_linkage_name [DW_FORM_strp] ( .debug_str[0x0000003f] = "_ZN1Z3barE")
hoho has: DW_AT_name [DW_FORM_strp] ( .debug_str[0x0000004a] = "hoho") and has NO DW_AT_linkage_name attribute. Because it would be
the same as DW_AT_name and DWARF producers avoids emiting excessive data.
Hence LLD should also use DW_AT_linkage_name when it is available.
(currently, LLD fails to report location correctly because thinks that A::bar and Z::bar are the same things)
Differential revision: https://reviews.llvm.org/D47373
llvm-svn: 333880
Clang passes --plugin /path/to/LLVMgold.so to the linker when -flto is
passed. After r333607 we only ignore --plugin as a joined argument,
which means that the following argument (/path/to/LLVMgold.so) is
interpreted as an input file. This means that either every LTO'd
program ends up being linked with the gold plugin or we error out
if the plugin does not exist. The fix is to use Eq to ignore both
--plugin=foo and --plugin foo as before.
Differential Revision: https://reviews.llvm.org/D47657
llvm-svn: 333793
Since aliases don't actually need name, I removed it from Options.td
to keep the definitions concise.
Before:
-( Ignored for compatibility with GNU unless you pass --warn-backrefs
-) Ignored for compatibility with GNU unless you pass --warn-backrefs
--allow-multiple-definition Allow multiple definitions
--apply-dynamic-relocs Apply dynamic relocations to place
--as-needed Only set DT_NEEDED for shared libraries if used
--auxiliary=<value> Set DT_AUXILIARY field to the specified name
--Bdynamic Link against shared libraries
--Bshareable Build a shared object
...
After:
-( Alias for --start-group
-) Alias for --end-group
--allow-multiple-definition Allow multiple definitions
--apply-dynamic-relocs Apply dynamic relocations to place
--as-needed Only set DT_NEEDED for shared libraries if used
--auxiliary=<value> Set DT_AUXILIARY field to the specified name
--Bdynamic Link against shared libraries (default)
--Bshareable Alias for --shared
...
Differential Revision: https://reviews.llvm.org/D47588
llvm-svn: 333694
Summary:
After r333596, rpath-link no longer consumes the following argument, and
the path argument left by it confuses LLD.
Reviewers: espindola, ruiu
Reviewed By: ruiu
Subscribers: ruiu, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D47591
llvm-svn: 333686
Add support for the R_PPC64_GOT_TLSLD16 relocations used to build the address of
the tls_index struct used in local-dynamic tls.
Differential Revision: https://reviews.llvm.org/D47538
llvm-svn: 333681
getRelocTargetVA for R_TLSGD and R_TLSLD RelExprs calculate an offset from the
end of the got, so adjust the names to reflect this.
Differential Revision: https://reviews.llvm.org/D47379
llvm-svn: 333674
--push-state implemented in this patch saves the states of --as-needed,
--whole-archive and --static. It saves less number of flags than GNU linkers.
Since even GNU linkers save different flags, no one seems to care about the
details. In this patch, I tried to save the minimal number of flags to not
complicate the implementation and the siutation.
I'm not personally happy about adding the --{push,pop}-state flags though.
That options seem too hacky to me. However, gcc started using the options
since GCC 8 when GNU ld is available at the build time. Therefore, lld
is no longer a drop-in replacmenet for GNU linker for that machine
without supporting the flags.
Fixes https://bugs.llvm.org/show_bug.cgi?id=34567
Differential Revision: https://reviews.llvm.org/D47542
llvm-svn: 333646
Previously, we printed out two lines of help messages for `--foo bar`
and `--foo=bar` like this:
--soname=<value> Set DT_SONAME
--soname <value> Set DT_SONAME
--sort-section=<value> Specifies sections sorting rule when linkerscript is used
--sort-section <value> Specifies sections sorting rule when linkerscript is used
This change eliminates duplicate lines that doesn't contain `=` for such
options like this.
--soname=<value> Set DT_SONAME
--sort-section=<value> Specifies sections sorting rule when linkerscript is used
Differential Revision: https://reviews.llvm.org/D47558
llvm-svn: 333596
Adds handling of all the relocation types for general-dynamic thread local
storage.
Differential Revision: https://reviews.llvm.org/D47325
llvm-svn: 333420
George Rimar