Since these timeouts guard against catastrophic error in debugserver,
I also increased all of them to the maximum value among them.
The motivation for this test was the observation that an asanified
LLDB would often exhibit seemingly random test failures that could be
traced back to debugserver packets getting out of sync. With this path
applied I can no longer reproduce the one particular failure mode that
I was investigating.
rdar://problem/49441261
Differential Revision: https://reviews.llvm.org/D60340
llvm-svn: 357829
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Summary:
As discussed in https://bugs.llvm.org/show_bug.cgi?id=37317,
FindGlobalVariables does not properly handle the case where
append=false. As this doesn't seem to be used in the tree, this patch
removes the parameter entirely.
Reviewers: clayborg, jingham, labath
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits, kubamracek, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46885
Patch by Tom Tromey <ttromey@mozilla.com>.
llvm-svn: 333639
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Summary:
The new UndefinedBehaviorSanitizer plugin was breaking file path length
limits, because it's (fairly long name) appears multiple times in the
path. Cmake ends up putting the object file at path
tools/lldb/source/Plugins/InstrumentationRuntime/UndefinedBehaviorSanitizer/CMakeFiles/lldbPluginInstrumentationRuntimeUndefinedBehaviorSanitizer.dir/UndefinedBehaviorSanitizerRuntime.cpp.obj
which is 191 characters long and very dangerously close to the 260
character path limit on windows systems (also, just the include line for
that file was breaking the 80 character line limit).
This renames the sanitizer plugins to use shorter names (asan, ubsan,
tsan). I think this will still be quite understandable to everyone as
those are the names everyone uses to refer to them anyway.
Reviewers: zturner, kubamracek, jingham
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34553
llvm-svn: 306278
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Removes Clang warning ThreadSanitizerRuntime.cpp:591:21: warning:
comparison of integers of different signs: 'int' and 'size_t' (aka
'unsigned long') [-Wsign-compare]
llvm-svn: 301067
TSan now has the ability to report races on "external" object, i.e. any library class/object that has read-shared write-exclusive threading semantics. The detection and reporting work almost out of the box, but TSan can now provide the type of the object (as a string). This patch implements this into LLDB.
Differential Revision: https://reviews.llvm.org/D30024
llvm-svn: 295342
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
We currently limit the length of TSan returned backtraces to 8, which is not necessary (and a bug, most likely). Let's remove this.
Differential Revision: https://reviews.llvm.org/D28035
llvm-svn: 291522
In r288065, we added more report types into ASan that will be reported via the debugging API. This patch in LLDB provides human-friendly bug descriptions. This also improves wording on existing bug descriptions.
Differential Revision: https://reviews.llvm.org/D27017
llvm-svn: 288535
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Factor out some common logic used to find the runtime library in a list
of modules.
Differential Revision: https://reviews.llvm.org/D23150
llvm-svn: 278368
Adapters for instrumentation runtimes have to do two basic things:
1) Load a runtime library.
2) Install breakpoints in that library.
This logic is duplicated in the adapters for asan and tsan. Factor it
out and document bits of it to make it easier to add new adapters.
I tested this with check-lldb, and double-checked
testcases/functionalities/{a,t}san.
Differential Revision: https://reviews.llvm.org/D23043
llvm-svn: 278367
For Thread Sanitizer reports, LLDB tries to find a global variable declaration
corresponding to the racy address in order to provide a filename and line
number. This commit changes the lookup of the variable to use the mangled
name for lookup and fall back to the demangled version if unavailable. This
is needed to report locations of races on Swift global variables.
I've also added a test to make sure we look up C++ globals correctly.
rdar://problem/26459401
Differential Revision: http://reviews.llvm.org/D20760
llvm-svn: 271433
quietly apply fixits for those who really trust clang's fixits.
Also, moved the retry into ClangUserExpression::Evaluate, where I can make a whole new ClangUserExpression
to do the work. Reusing any of the parts of a UserExpression in situ isn't supported at present.
<rdar://problem/25351938>
llvm-svn: 264793
This patch adds ThreadSanitizer support into LLDB:
- Adding a new InstrumentationRuntime plugin, ThreadSanitizerRuntime, in the same way ASan is implemented.
- A breakpoint stops in `__tsan_on_report`, then we extract all sorts of information by evaluating an expression. We then populate this into StopReasonExtendedInfo.
- SBThread gets a new API, SBThread::GetStopReasonExtendedBacktraces(), which returns TSan’s backtraces in the form of regular SBThreads. Non-TSan stop reasons return an empty collection.
- Added some test cases.
Reviewed by Greg Clayton.
llvm-svn: 264162
Turns out that most of the code that runs expressions (e.g. the ObjC runtime grubber) on
behalf of the expression parser was using the currently selected thread. But sometimes,
e.g. when we are evaluating breakpoint conditions/commands, we don't select the thread
we're running on, we instead set the context for the interpreter, and explicitly pass
that to other callers. That wasn't getting communicated to these utility expressions, so
they would run on some other thread instead, and that could cause a variety of subtle and
hard to reproduce problems.
I also went through the commands and cleaned up the use of GetSelectedThread. All those
uses should have been trying the thread in the m_exe_ctx belonging to the command object
first. It would actually have been pretty hard to get misbehavior in these cases, but for
correctness sake it is good to make this usage consistent.
<rdar://problem/24978569>
llvm-svn: 263326
1) It was forward declaring functions without 'extern "C"'. That used to work
but only because of another bug in how we passes symbol only function names to the
compiler and stopped working recently.
2) These forward declarations were in the body of the User Expression, and they actually
need to go in the prefix file.
<rdar://problem/24177689>
llvm-svn: 257852
Adrian Prantl